HDX18t unrecognized devices after installing Win7

After a clean install of Windows 7 Ultimate, Device Manager reports three Base System Devices without drivers and two Unknown Devices (ACPI\ENE0100 *ENE0100) and (USB\VID_138A&PID_0001&REV_0372 USB\VID_138A&PID_0001).
As far as I can tell, all the USB ports work correctly, as does everything else I have tested (some ports I don't use). I presume ACPI has something to do with power management, but I can't find any other indications of power problems -- although I had to replace the battery not long before installing Win7 because it wasn't charging.
What are these five devices, and how can I find drivers -- especially for the three that don't seem to identify themselves?
I tried to use the "automatically find your products and solutions" tool, but it won't load into the latest version of SeaMonkey, and with IE9 it appears to start but shows zero progress after more than an hour.
Any suggestions?
This question was solved.
View Solution.

Hi:
The base system device is this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76497-1&cc=us&dlc=en&lc=en&...=
The first unknown device you posted that needs drivers is this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66577-1&cc=us&dlc=en&lc=en&...=
The second unknown device you listed is this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67648-1&cc=us&dlc=en&lc=en&...=
Paul

Similar Messages

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Old X-Fi Platinum unrecognized even after installing drivers

Old X-Fi Platinum unrecognized even after installing drivers? I've got an old X-Fi Platinum card I bought more than 2 years ago (Model SB0460). When I first installed it a couple years ago (on Windows XP), it worked fine for a few months, then I started having issues about every 5th bootup where the card wasn't recognized. Simply restarting the computer would usually work. But after awhile, it finally quit being recognized. I thought maybe it was a problem with the drivers, which were old and buggy, so I took the card out and shelved it for a year and a half. I re-installed it today using the new drivers (2.8.0008), and everything installs fine until I reboot. Then I get the same old "Found new Hardware: Multimedia Audio Controller" popup every time, and the X-Fi drivers (that were there before the reboot) are nowhere to be found in the device manager list. ?
Is this a hardware problem or a software problem? This is a fairly new XP installation, and I spent weeks doing new installs and reformats a couple years ago when I had the original problem and that never helped, so I'm thinking it must be either the card is dead or a hardware conflict. FWIW, I'm using a Dell XPS 40 with the onboard audio disabled in the bios. Thanks.

I have the same problem! Running 32-bit XP SP2, Core 2 Duo with ASUS P5B Deluxe, with a MIDI keyboard plugged into the Li'veDri've of my X-Fi Platinum. Driver version 5.2.6.87 from 8/7/2006. Everything else on my computer works after I come back from standby, but not MIDI input. Most infuriating. The worst part is I know this will never be fixed...

Mic problem after installing win7 through bootcamp

i am having a problem of mic in my macbook after installing win7 through bootcamp if any one have solution please mail me

yes, no luck there either.
Now I cannot boot at all.
I never had a problem wih the Mac OSX side only that crappy microsoft software. Unfortunately
there are a lot of woftware that I need for my work that only exist under micorsoft.

HT1338 Can't access my mac os side after installing win7

I just installed windows 7 on my new mac using boot camp. I followed all the steps but after installing win7 there is no way I can access my mac os partition. I tried to reboot with the Alt/option key pressed but I am presented with a window asking me to provide a password. When I enter my password, it won't let me in. It just delete the password. I have re-tried several times but it won't work. My question are:
1. Is there any way I can install windows support software (for the driver) from bootcamp since I cannot access my mac side.
2. I tried to download and install bootcamp but it doesn't work since it says I do not need to install any bootcamp update.
3. Is there any ways I can go past the mac password screen? I really don't understand why it doesn't accept my password. I am the only administrator and user of my computer

#3. Try things in this Reset Password faq.
DALE

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

After installing Win7, I created an 3a. partition and now I can't boot with Win7

After installing Win7 with success, I created an other data partition and now I can't boot with Win7 anymore. What can I do?
Thanks!
Vernon

Thanks, hatter! But I´m new in the Mac World and that´s greek for me. I have no idea about what is BCDedit, GPT, EFI, etc... I went to your bookmarks and found many discursions there. I selected 5 that the subject looks useful for me (https://discussions.apple.com/thread/3543804, https://discussions.apple.com/thread/3477901,
https://discussions.apple.com/thread/3360787, https://discussions.apple.com/thread/3354587 and https://discussions.apple.com/thread/3199099) but, as a tipical windows user, a really new mac user and a non-american (I don´t speak English well), it´s impossible to me to understand all this.
Do you know any "how to" in this forum or i any other part of the Internet where explain step-by-step what a dummy needs to do to recover the acess to the Windows partition (my primary objective) and create an third partition (FAT32) for data acessible for both OS?
Thank you very much!

*FIXXED* Issues updating firmware on Creative ZEN portable devices after installing Media Player

<font face="Times New Roman" size="2">?Quote from windows website ?If you have a Creative ZEN device, see http://www.microsoft.com/windows/windowsmedia/player//readme.aspx#RollingbacktoapreviousversionofthePlay er Read the ?Rolling back to a previous version of the Player? instructions (by the way windows website is even willing to address the problems with creatives products. And they offer possible solutions)
*Some people said this was all you needed to do but it did not work for me.
2. I uninstalled every program which mentioned creative.
a. Click my computer
b.click Add / Remove programs
c. Find anything that is made by creative and uninstall (or if you hate creative as much as me just look for anything that says creative or might hint at being a creative product)
3.Go into My Computer / Program Files? and delete the folder named ?creative?
4.Click ?Start? Click ?run? type in ?MSCONFIGOK? on the tabs click ?Services? then click on ?manufacturer? and uncheck anything that says Creative, click ?service? and also uncheck anything which mentions creative? if you think it has to do with creative technologies ltd. *RESTART*
Tried to load firmware again... ?Nothing
5. Installed old software from ?creative zen touch? & ?Creative Media Source? from the Creative Zen Touch CD. On both just did the full install. They congratulated me on my purchase of my zen touch! They could have?congratulated me on burning 250$. *Restarted
*THIS IS THE KEY*************
6. Download Microsoft media player 0 from some website, I used oldversion.com
http://www.oldversion.com/download.p...e4e5bbb7694ded?
7. I then updated windows media player ten... just updates for 0 I didn't install .
8. On this WINDOWS site http://www.microsoft.com/windows/win...dme.aspx#57877 click on and read ?Issues with devices after removing Windows Media Player?. When you are done with the procedure of deleting and reinstalling your the portable device I plugged in my mp3 player and it recognized it's not a big shock because it recognized it as a zen touch before I deleted the drivers. So I got the new drivers it noticed it, just like other systems noticed, but this time the Creative horribly programmed firmware update recognized it. I will never buy another creative product again, probably most of you wont either. But I have already paid the money for this product so I plan on using it until the battery dies on me. Hope this helps!
Message Edited by diezentouch on 02-04-200709:47 PM

P.S. Goodluck to all of you I dont know if I will check this again but it took me about 8 - 0 hours to fix. I tried to make it as descripti've as I could so I cant be of much more help. But feel free if you have other fixxes to add or questions

Win XP finds no audio device after installing Audigy 2

After installing Audigy 2 ZS, my Windows XP could no longer identify an audio device. Under Control Panel > Sounds and Audio Devices, clicking on the Audio tab, there is no Default Device for playback or whatsoever.
However, under the Hardware tab, Audigy 2 ZS is visible and seems to work fine. The only suspicious part I caught is that when I check for Properties of Audigy 2 ZS and go down to check Properties of Creative Audigy Audio Processor (WDM), the status shows "The di'ver is enabled but has not been started." I have no idea how this can be fixed.
The integrated sound card is turned off in the BIOS.
I've tried all possible ways to install, uninstall, install..., but just couldn't get XP to work properly. Any other possible solutions out there?
Many thanks!

Solved after reinstalling Win XP. Wasted too much time on trying other possible solutions.
Hope other people may learn something out of it.

Still restarts after instalation WIN7

Hi everyone,
I have problem, I have bought Lenovo IdeaPad G570 without OS. I tried to instal WIN7, everything going fine, but at the end of instalation, notebook wrote "logon process initialization failure" and still restarts. In instalacion I deleted partitions, and format the new one so i havent my backup file. I tried to recover it, but still the same. Could you help me pls.

System get restarted after installation of windows. I would suggest you to kindly check the SATA mode controller in the BIOS mode, change it to IDE or compatible mode. To do so please restart the system and press F2 key continuously, Bios screen will appear.
Also you can check with other operating system.
Thanks & Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Calendar alerts on every device after installing Mountain Lion. How do I stop this? Tech support acted like I was the first person this happened to. Anyone have the solution?

I have Calendar alerts on every device [Mac/iPad/iPhone] after installing Mountain Lion. How do I stop this? Tech support acted like I was the first person this happened to. Anyone have the solution?

Well, whichever device you uncheck = exclude from calendars (and reminders) via iCloud will be excluded as both, receiver and sender. It's an "all or nothing", I guess. Otherwise it'd get more complicated, and the support calls could easily fill an extra forum...
@lmp68: don't think iTunes is it, in the days of iCloud that would sure take quite an extra effort, if possible at all.

Satellite A300 (PSAG8E) - Hardware problems after installing win7 ultimate

Hello and good day,
I've installed win7 ultimate a few days ago and windows managed to recognize most of my hardware accept my build in mic and camera and another component I am not sure about what it is (Windows update automatically downloaded the sound and graphics driver for me).
My questions are - where can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The driver site in the Toshiba support page does not include those drivers and software)
Thank you very much
Roi Ben Simon

Hi
I have Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfect.
At first I must say that I don't know where you have searched drivers and Toshiba tools and utilities because all stuff is downloadable on Toshiba support & download page under http://eu.computers.toshiba-europe.com
It is logic that mic will not work if you didn't installed proper driver. Install drivers alone and not using Microsoft update. What you need are real and tested drivers and not some free drivers from internet.
Go to Toshiba download page and install all stuff following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Everything works well but missing some drivers
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - work properly.
-Synaptics driver

After installing Win7 x32 SP1 I can not start Firefox. Not even in safe mode. I uninstalled Firefox and re-installed the program. Won't start.

After installing SP1 Firefox quit working and Internet Explore quit working. I can only use Chrome as a browser at this time.

See:
*http://kb.mozillazine.org/Browser_will_not_start_up
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Unknow device after installing Windows 7

Hello,
I installed windows 7 beta on my DV9000 laptop.I used the Vista drivers (found on HP website for my laptop model), the laptop worked normally but I found an unknown device in the devices manager, also I installed the figer reader device and driver correctly but the reader is not working.
First, how can I identify what is the unknown device (I installed all drivers correctly and I checked all external devices such as sound, vga, mouse touch pad ... all working as they were in Vista)?
Second, I installed the finger reader correctly and it is shown as working in devices manager (this means it is not the unknown device). Does the reader need a special software to be installed in order for the reader to works correctly?
Thank You

If this problem won't be solved then...
Go to Control Panel -> Devices Manager
Click with right button of Your mouse on each yellow sign and choose properties. Then go to bottom details and paste here Hardware Ids. This way we will know what it is.
Below You've got example how to do it:
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

TS3173 mac 27 inch ,i5 . after installing Win7 , missing drivers .

i have mac 27inch , i5. i install win7. installation was successful, but i found out that all the neccesary drivers were not yet install. like display ,ethernet , wireless connection ,etc .. help..!

Did you read ANY of the guides? You will want to read the Installation Guide at the top.

HDX18t unrecognized devices after installing Win7

Similar Messages

Maybe you are looking for