He cluster resource host subsystem (RHS) stopped unexpectedly
i m getting following error on a daily at night , my all services got restarted.... Pls help
Running windows 2008 r2 Enterprise
The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor.
Hi,
this hotfix contains the latest clusres.dll. Can you try it?
http://support.microsoft.com/kb/2854082
and check this list:
http://social.technet.microsoft.com/wiki/contents/articles/2008.list-of-cluster-hotfixes-for-windows-server-2008-r2.aspx
http://OpsMgr.ru/
Similar Messages
-
Resource Hosting Subsystem process crashes from KERNELBASE.dll
Hi,
I have 2 2013 Exchange servers in a DAG configuration. The passive member (I'll refer to it as EX02) is experiencing an issue where the Cluster Service crashes almost immediately after it is started. I've experienced this with this particular DAG before
and ultimately ended up rebuilding the entire DAG from scratch to fix the issue, however it seems to have returned and now need a root cause analysis and fix. I've attached 4 Event Logs that have allowed me to drill down to the problem component but am at
a loss on how to proceed next. Initially, when checking the cluster using Failover Cluster Manager, the EX02 node goes back and forth between "Joining" and "Down". This is a result of the Cluster Service constantly crashing and restarting
since it is set to auto restart after an unexpected termination.
Looking at the 1146 Event ID, I saw this points to the Resource Hosting Subsystem as part of the issue and that this process experienced an issue with a .dll it's using. I then discovered this was the KERNELBASE.dll via the various other log entries
I've included below. I haven't been able to find anyone else that's ran into this particular scenario and am not sure what needs to be done to correct this behavior. If anyone has any insight to this issue, it would be greatly appreciated. If any additional
information is needed from me, please let me know as well.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 3/3/2015 2:34:59 PM
Event ID: 1146
Task Category: Resource Control Manager
Level: Critical
Keywords:
User: SYSTEM
Computer: ****-EX02.****.com
Description:
The cluster Resource Hosting Subsystem (RHS) process was terminated and will be restarted. This is typically associated with cluster health detection and recovery of a resource. Refer to the System event log to determine which resource and resource DLL is causing the issue.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1146</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T20:34:59.261068900Z" />
<EventRecordID>286364</EventRecordID>
<Correlation />
<Execution ProcessID="4716" ThreadID="4996" />
<Channel>System</Channel>
<Computer>****-EX02.****.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="NodeName">****-EX02</Data>
</EventData>
</Event>
Log Name: Application
Source: Application Error
Date: 3/3/2015 2:36:13 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: ****-EX02.****.com
Description:
Faulting application name: clussvc.exe, version: 6.3.9600.17396, time stamp: 0x5434db7b
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0x80000003
Fault offset: 0x00000000000de002
Faulting process id: 0x31c8
Faulting application start time: 0x01d055f1a860f6f2
Faulting application path: C:\Windows\Cluster\clussvc.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: ee64313c-c1e4-11e4-80da-005056010d14
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T20:36:13.000000000Z" />
<EventRecordID>264219</EventRecordID>
<Channel>Application</Channel>
<Computer>****-EX02.****.com</Computer>
<Security />
</System>
<EventData>
<Data>clussvc.exe</Data>
<Data>6.3.9600.17396</Data>
<Data>5434db7b</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>80000003</Data>
<Data>00000000000de002</Data>
<Data>31c8</Data>
<Data>01d055f1a860f6f2</Data>
<Data>C:\Windows\Cluster\clussvc.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>ee64313c-c1e4-11e4-80da-005056010d14</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 3/3/2015 2:36:14 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: ****-EX02.****.com
Description:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: clussvc.exe
P2: 6.3.9600.17396
P3: 5434db7b
P4: KERNELBASE.dll
P5: 6.3.9600.17415
P6: 54505737
P7: 80000003
P8: 00000000000de002
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_clussvc.exe_fcdf2bbcddca922c916880dbb49ce3cd5175efef_f6feed2e_3a22d925
Analysis symbol:
Rechecking for solution: 0
Report Id: ee64313c-c1e4-11e4-80da-005056010d14
Report Status: 4100
Hashed bucket:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-03T20:36:14.000000000Z" />
<EventRecordID>264220</EventRecordID>
<Channel>Application</Channel>
<Computer>****-EX02.****.com</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>0</Data>
<Data>APPCRASH</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>clussvc.exe</Data>
<Data>6.3.9600.17396</Data>
<Data>5434db7b</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>80000003</Data>
<Data>00000000000de002</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_clussvc.exe_fcdf2bbcddca922c916880dbb49ce3cd5175efef_f6feed2e_3a22d925</Data>
<Data>
</Data>
<Data>0</Data>
<Data>ee64313c-c1e4-11e4-80da-005056010d14</Data>
<Data>4100</Data>
<Data>
</Data>
</EventData>
</Event>
Version=1
EventType=APPCRASH
EventTime=130698881964369580
ReportType=2
Consent=1
ReportIdentifier=0d8e824c-c1e4-11e4-80da-005056010d14
IntegratorReportIdentifier=0d8e824b-c1e4-11e4-80da-005056010d14
NsAppName=clussvc.exe
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=clussvc.exe
Sig[1].Name=Application Version
Sig[1].Value=6.3.9600.17396
Sig[2].Name=Application Timestamp
Sig[2].Value=5434db7b
Sig[3].Name=Fault Module Name
Sig[3].Value=KERNELBASE.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.3.9600.17415
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=54505737
Sig[6].Name=Exception Code
Sig[6].Value=80000003
Sig[7].Name=Exception Offset
Sig[7].Value=00000000000de002
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.272.7
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=a80b
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=a80b5d7481362c8eeb76a77903fa82d6
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=a1f8
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=a1f83374660c205ca4489043b9691b2f
UI[2]=C:\Windows\Cluster\clussvc.exe
UI[5]=Check online for a solution (recommended)
UI[6]=Check for a solution later (recommended)
UI[7]=Close
UI[8]=Microsoft Failover Cluster Service stopped working and was closed
UI[9]=A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
UI[10]=&Close
LoadedModule[0]=C:\Windows\Cluster\clussvc.exe
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\KERNEL32.DLL
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\msvcrt.dll
LoadedModule[5]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[6]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[7]=C:\Windows\SYSTEM32\CLUSAPI.dll
LoadedModule[8]=C:\Windows\system32\CRYPT32.dll
LoadedModule[9]=C:\Windows\SYSTEM32\dhcpcsvc.DLL
LoadedModule[10]=C:\Windows\SYSTEM32\IPHLPAPI.DLL
LoadedModule[11]=C:\Windows\SYSTEM32\NTDSAPI.dll
LoadedModule[12]=C:\Windows\system32\ole32.dll
LoadedModule[13]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[14]=C:\Windows\SYSTEM32\RESUTILS.dll
LoadedModule[15]=C:\Windows\system32\RPCRT4.dll
LoadedModule[16]=C:\Windows\SYSTEM32\SspiCli.dll
LoadedModule[17]=C:\Windows\SYSTEM32\sscore.dll
LoadedModule[18]=C:\Windows\system32\USER32.dll
LoadedModule[19]=C:\Windows\SYSTEM32\VSSAPI.DLL
LoadedModule[20]=C:\Windows\SYSTEM32\wevtapi.dll
LoadedModule[21]=C:\Windows\system32\WS2_32.dll
LoadedModule[22]=C:\Windows\system32\NSI.dll
LoadedModule[23]=C:\Windows\SYSTEM32\WINNSI.DLL
LoadedModule[24]=C:\Windows\SYSTEM32\FirewallAPI.dll
LoadedModule[25]=C:\Windows\SYSTEM32\bcrypt.dll
LoadedModule[26]=C:\Windows\SYSTEM32\NETAPI32.dll
LoadedModule[27]=C:\Windows\SYSTEM32\FLTLIB.DLL
LoadedModule[28]=C:\Windows\system32\SETUPAPI.dll
LoadedModule[29]=C:\Windows\SYSTEM32\DEVOBJ.dll
LoadedModule[30]=C:\Windows\SYSTEM32\fwpuclnt.dll
LoadedModule[31]=C:\Windows\SYSTEM32\VirtDisk.dll
LoadedModule[32]=C:\Windows\SYSTEM32\clfsw32.dll
LoadedModule[33]=C:\Windows\SYSTEM32\DSPARSE.dll
LoadedModule[34]=C:\Windows\SYSTEM32\cryptdll.dll
LoadedModule[35]=C:\Windows\system32\MSASN1.dll
LoadedModule[36]=C:\Windows\SYSTEM32\combase.dll
LoadedModule[37]=C:\Windows\system32\GDI32.dll
LoadedModule[38]=C:\Windows\SYSTEM32\VssTrace.DLL
LoadedModule[39]=C:\Windows\SYSTEM32\DSROLE.dll
LoadedModule[40]=C:\Windows\SYSTEM32\bcd.dll
LoadedModule[41]=C:\Windows\SYSTEM32\netutils.dll
LoadedModule[42]=C:\Windows\SYSTEM32\srvcli.dll
LoadedModule[43]=C:\Windows\SYSTEM32\wkscli.dll
LoadedModule[44]=C:\Windows\system32\CFGMGR32.dll
LoadedModule[45]=C:\Windows\SYSTEM32\DPAPI.DLL
LoadedModule[46]=C:\Windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[47]=C:\Windows\SYSTEM32\SAMCLI.DLL
LoadedModule[48]=C:\Windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule[49]=C:\Windows\SYSTEM32\sscoreext.dll
LoadedModule[50]=C:\Windows\SYSTEM32\mi.dll
LoadedModule[51]=C:\Windows\SYSTEM32\miutils.dll
LoadedModule[52]=C:\Windows\system32\wmidcom.dll
LoadedModule[53]=C:\Windows\SYSTEM32\kernel.appcore.dll
LoadedModule[54]=C:\Windows\SYSTEM32\ntmarta.dll
LoadedModule[55]=C:\Windows\SYSTEM32\dhcpcsvc6.DLL
LoadedModule[56]=C:\Windows\SYSTEM32\clbcatq.dll
LoadedModule[57]=C:\Windows\system32\wbem\wbemprox.dll
LoadedModule[58]=C:\Windows\SYSTEM32\wbemcomn.dll
LoadedModule[59]=C:\Windows\SYSTEM32\CRYPTSP.dll
LoadedModule[60]=C:\Windows\system32\rsaenh.dll
LoadedModule[61]=C:\Windows\system32\wbem\wbemsvc.dll
LoadedModule[62]=C:\Windows\system32\wbem\fastprox.dll
LoadedModule[63]=C:\Windows\SYSTEM32\pcwum.dll
LoadedModule[64]=C:\Windows\system32\mswsock.dll
LoadedModule[65]=C:\Windows\system32\WINTRUST.dll
LoadedModule[66]=C:\Windows\SYSTEM32\logoncli.dll
LoadedModule[67]=C:\Windows\SYSTEM32\DNSAPI.dll
LoadedModule[68]=C:\Windows\System32\rasadhlp.dll
LoadedModule[69]=C:\Windows\system32\kerberos.DLL
LoadedModule[70]=C:\Windows\SYSTEM32\SAMLIB.dll
LoadedModule[71]=C:\Windows\system32\es.dll
LoadedModule[72]=C:\Windows\system32\PROPSYS.dll
LoadedModule[73]=C:\Windows\SYSTEM32\profapi.dll
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=Microsoft Failover Cluster Service
AppPath=C:\Windows\Cluster\clussvc.exe
NsPartner=windows
NsGroup=windows8
ApplicationIdentity=78F1110F74732BD871C9A3C553A667E4Got a window to reboot the EX02 machine and this seems to have solved the issue. Cluster Service is stable again and DAG is healthy. This issue can be marked as answered.
I have this same issue, and it appears to manifest whenever there is a network disruption. After network is restored, the cluster service repeatedly crashes until a reboot. I'm not sure if a reboot is a real fix. I'm curious whether
yours returns if you unplug the network cable and plug it back in on your server, like mine. -
Cluster resource SID.WORLD' (resource type '', DLL 'fsresodbs.dll') either crashed or deadlocked.
Dear Friends,
We are facing issue with our systems which is running on win2008 with oracle DB this is MSCS environment.
Automatically some resource moved to node2 from node1 and database went down, in fail safe cluster management i can see error as below.
Cluster resource 'SID.WORLD' (resource type '', DLL 'fsresodbs.dll') either crashed or deadlocked. The Resource Hosting Subsystem (RHS) process will now attempt to terminate, and the resource will be marked to run in a separate monitor.
And
The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor.
Kindly help us to solve this issue.
Thanks
BasisHi Deepak,
Thanks for providing the link.
I have seen the link and symptoms are same, but only difference is, this link is talking about clusres.dll' and we have issue with fsresodbs.dll'
Our issue
Cluster resource 'SID.WORLD' (resource type '', DLL 'fsresodbs.dll''') either crashed or deadlocked.
and issue described in the Link
Cluster resource 'SID.WORLD' (resource type '', DLL 'clusres.dll'') either crashed or deadlocked.
Kindly guide.
Thanks
Basis -
Dear Experts
I am trying to do High Availability Installation on MSCS , and im in the stage that trying to create Central Services Instance for ABAP (ASCS) , but when i did and im trying to start the FileServer resource i face the following error:
Cluster resource 'SAPPRD' (resource type '', DLL 'clusres.dll') either crashed or deadlocked. The Resource Hosting Subsystem (RHS) process will now attempt to terminate, and the resource will be marked to run in a separate monitor.
The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor.
i have tried almost everything even destroying the cluster and the uninstallating the fail over cluster manager feature
please advice what can i do??
thanks
Sameh EssaHi Sameh,
Have u rectified this issue.we are also facing the same problem.We have installed our BI cluster systems in Windows 2008 64bit enterprise and MS sql2008 R2.The cluster resource is getting crashed and failover to the second node.The windows error log as shown below.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 12/1/2011 2:29:48 AM
Event ID: 1146
Task Category: Resource Control Manager
Level: Critical
Keywords:
User: SYSTEM
Computer:
Description:
The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL.
Thanks
Arun Padikkal -
Hi
We have 3 Node Hyperv 2012 R2 Failover Cluster suddenly we face below error on one Node.
A component on the server did not respond in a timely fashion. This caused the cluster resource 'Virtual Machine Configuration (resource type 'Virtual Machine Configuration', DLL 'vmclusres.dll') to exceed its time-out threshold. As part of cluster
health detection, recovery actions will be taken. The cluster will try to automatically recover by terminating and restarting the Resource Hosting Subsystem (RHS) process that is running this resource. Verify that the underlying infrastructure (such as storage,
networking, or services) that are associated with the resource are functioning correctly.Hi jingoi,
“Refer to the System event log to determine which resource and resource DLL is causing the issue” from the literal meaning of view we can get a cluster resource crash or not
responding, since the current information we can not determine which component may crash you can get the cluster log to determine which cluster resource has issue first.
Some folk meet this similar issue because they have not install the following update and got vmclusters.dll deadlock, please install them first then monitor this issue again.
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
https://social.technet.microsoft.com/Forums/windowsserver/en-US/fce9f196-0ac7-4456-87b3-f3de508231d7/cluster-resource-hang?forum=winserverClustering
October 2014 update rollup for Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2
http://support.microsoft.com/en-us/kb/2995388
More information:
Get-ClusterLog
https://technet.microsoft.com/en-us/library/ee461045.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
One VM Cluster Resources Regularly Failing
Hi All,
We run hundreds of Windows and Linux VMs in clustered and non-clustered environments. However, we're having issues with one particular VM that regularly restarts itself. The environment the problem VM is running in is a Windows 2012 R2 cluster.
The event log within the VM provides no BSOD information, the only entry of any note:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Therefore, I don't believe that the actual OS within the VM (Windows 2008 R2) is crashing.
The cluster log shows only a single entry:
Cluster resource 'Virtual Machine vps.xxxxxx.com' of type 'Virtual Machine' in clustered role 'vps.xxxxxx.com' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
How can I debug this? I've added extra RAM to it, and moved it to other nodes and other storage but the problem continues to occur.
Thanks
WillHi,
To such issue, it is not an efficient way to work in this community since we may need more resources, for example memory (an application) dump or ETL trace, which is not appropriate to handle in the community. I’d like to suggest that you submit a
service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Best regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
While installing sql server 2012 with failover clustering I got the following error:
The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure. Status code: 5942. Description: The resource failed to come online due to the failure of one
or more provider resources.
The two nodes of the sql server failover have been successfully prepared. The error came while running the advance cluster completion option.
In the clustered events in failover cluster manager the following message is displayed:
Cluster resource 'SQL Network Name (CPCTestSQLClus)' of type 'Network name' in clustered role 'SQL Server (MSSQLSERVER)' failed.
I have done various checking and the issue remained. I tried to start the sqlPlease find below part of the content of the cluster log. I hope this is helpful in resolving the issue:
00000998.000010e8::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online called for resource SQL Network Name (CPCTestSQLClus)
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 997/0.
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlineCallIssued -> OnlinePending( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlineCallIssued-->OnlinePending.
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Online thread
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Initializing config info
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Skipping initialization of 'Identity' module because netname is not yet created
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual online of resource.
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Obtaining IP info for resource SQL IP Address 1 (CPCTestSQLClus)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Using provider SQL IP Address 1 (CPCTestSQLClus), ip address 10.144.166.160, mask 255.255.255.0, prefix length 24
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Resource has 1 IPs
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: IP: Type Ipv4, Address 10.144.166.160:~0~, Prefix 10.144.166.160/24, Online true, Transport \Device\NetBt_If3
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Offline
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Calling initialize of the configuration implementation
000005a4.00001350::2013/05/08-20:45:00.248 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Creating a New AD NetName (type Singleton)...
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Closing
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Initializing Name: CPCTestSQLClus, NetbiosName: CPCTESTSQLCLUS, Type: Singleton, Created: false
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: [NNLIB] GetCreatingDC - name CPCTestSQLClus, lookup flags = 1
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NNLIB] GetDCWithFlags - using DC
\\MY01DC03.Domain.net, domain name Domain.net, IsReadOnly 0, Object exists 0
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NN] Setting crypto access members for encrypt. New container = false.
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: Agent: Sending request Netname/LastDcChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.452 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: LastDc Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting last DC in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: LastDc Changed (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: Agent: Sending request Netname/PasswordChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Password Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.468 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting password in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: PasswordChanged (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.00000ab8::2013/05/08-20:45:00.636 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.647 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.0000075c::2013/05/08-20:45:00.784 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OU name for VCO is OU=NewComputers,OU=WORKSTATIONS,DC=Domain,DC=net
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name: Agent: Sending request Netname/GetToken to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Identity
00000998.00000ab8::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Module is not yet initialized. Trying to obtain a new token.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining new token
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain Domain.net
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] PopulateKerbKDCLookupCache - DC flags 0
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 94, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain label Domain
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 86, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:01.018 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 0)
00000998.0000075c::2013/05/08-20:45:01.096 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 1)
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NNLIB] Logon failed for user CPCTestWinClus$ (Error 1326), DC
\\MY01DC02.Domain.net, domain Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining Windows Token for Name: CPCTestWinClus, SamName: CPCTestWinClus$, Type: Singleton, Result: 1326, LastDC:
\\MY01DC02.Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Slow Operation, FinishWithReply: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: InternalReplyHandler with event: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: End of Slow Operation, state: Error/Idle, prevWorkState: Idle
00000998.00000ab8::2013/05/08-20:45:01.096 WARN [RES] Network Name <Cluster Name>: Identity: Get Token Request, currently doesnt have a token!
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: End of Slow Operation, state: Initializing/Writing, prevWorkState: Writing
00000998.000010e8::2013/05/08-20:45:01.096 WARN [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Slow operation has exception ERROR_INVALID_HANDLE(6)' because of '::ImpersonateLoggedOnUser( GetToken() )'
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD): 6
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: InitializeReplyCreation of NetName (type Singleton), result: 6, IsCanceled: false
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Deleting ResourceData, CreatingDC, ObjectGUID for a newly created netname from cluster database
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration): 6
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 6
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: PerformOnline - Initialization of Configuration module finished with result: 6
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online thread Failed: ERROR_SUCCESS(0)' because of 'Initializing netname configuration for SQL Network Name (CPCTestSQLClus) failed with
error 6.'
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: All resources offline. Cleaning up.
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RHS] Online for resource SQL Network Name (CPCTestSQLClus) failed.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 5018/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlinePending -> ProcessingFailure( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlinePending-->ProcessingFailure.
000005a4.0000050c::2013/05/08-20:45:01.112 ERR [RCM] rcm::RcmResource::HandleFailure: (SQL Network Name (CPCTestSQLClus))
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] resource SQL Network Name (CPCTestSQLClus): failure count: 6, restartAction: 2 persistentState: 1.
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Greater than restartPeriod time has elapsed since first failure of SQL Network Name (CPCTestSQLClus), resetting failureTime and failureCount.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Will queue immediate restart (500 milliseconds) of SQL Network Name (CPCTestSQLClus) after terminate is complete.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): ProcessingFailure -> WaitingToTerminate( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [WaitingToTerminate to DelayRestartingResource] -> Terminating( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Terminate called for resource SQL Network Name (CPCTestSQLClus)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Offline thread
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual offline of resource.
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AdminShare
00000998.000010e8::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AdminShare: OnCloseBase, Error Already Closing, previous state: Closing/Ending
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare) result: 1904
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 1904
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Canceling work, state: Closing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: OnCloseBase, previous state: Initializing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closing... (PreviousState: Initializing, Created: false, Type: Singleton)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Canceling work, state: Closing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OnCloseBase, previous state: Initializing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Finish Closing NetName (type Singleton) Module AccountAD, result 0, remaining... 0 (0)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- listing 3 instances ---------------------------------------------
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 082d8ef5-62a8-4fee-acbc-e89b769e9181:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closed
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 43dec41b-661c-42a8-ae23-b635d7ab11f5:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: c03fb105-9a50-4d00-8bee-afaf693f7efc:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Initializing/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Error/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Initialized/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- 0 Zombie modules
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(7) result 0/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [Terminating to DelayRestartingResource] -> DelayRestartingResource( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] Queueing immediate delay restart of resource SQL Network Name (CPCTestSQLClus) in 500 ms.
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.143 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.252 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Netbios
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: Slow Operation, FinishWithReply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: End of Slow Operation, state: Initialized/Idle, prevWorkState: Idle -
I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
IkadThanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad -
Windows Server 2012 R2
SQL Server 2012
After a recent cluster failover from node 1 to node 2, the Analysis Services role is in a failed state, with the service stopped. When attempting to start the service, there are two error messages captured in Failover Cluster Manager:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 4/10/2014 11:48:49 AM
Event ID: 1042
Task Category: Generic Service Resource
Level: Error
Keywords:
User: SYSTEM
Computer: HQ-HASQL-1.sbgnet.int
Description:
Generic service 'Analysis Services (HASQL)' failed with error '1067'. Please examine the application event log.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1042</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>16</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
<EventRecordID>26212</EventRecordID>
<Correlation />
<Execution ProcessID="9036" ThreadID="14748" />
<Channel>System</Channel>
<Computer>HQ-HASQL-1.sbgnet.int</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ResourceName">Analysis Services (HASQL)</Data>
<Data Name="Status">1067</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 4/10/2014 11:48:49 AM
Event ID: 1069
Task Category: Resource Control Manager
Level: Error
Keywords:
User: SYSTEM
Computer: HQ-HASQL-1.sbgnet.int
Description:
Cluster resource 'Analysis Services (HASQL)' of type 'Generic Service' in clustered role 'SQL Server (HASQL)' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
<EventID>1069</EventID>
<Version>1</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
<EventRecordID>26213</EventRecordID>
<Correlation />
<Execution ProcessID="6464" ThreadID="9076" />
<Channel>System</Channel>
<Computer>HQ-HASQL-1.sbgnet.int</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ResourceName">Analysis Services (HASQL)</Data>
<Data Name="ResourceGroup">SQL Server (HASQL)</Data>
<Data Name="ResTypeDll">Generic Service</Data>
</EventData>
</Event>
With just these generic error messages being present, this has been difficult to diagnose. Some research has yielded possible resolutions of the Event Viewer log being full, .NET corruption, missing registry entries, but none of those seem to be the issue
(Event Viewer logs cleared, Analysis services is working on the same physical servers in a different cluster, and the registry entries was only a supported issue for SQL Server 2008 and 2008 R2).
Any help would be greatly appreciated.Bring up Configuration Manager, look at binary path for SSAS. Make sure BOTH folders exist. Sometimes with failovers mappings get screwed up.
-
The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS
Hi,
I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
Error when sharing file system export (share) saploc : The cluster resource could not be found
I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
Can anyone please let me know where am I going wrong ?
NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
Regards,
Varadharajan MYes Krishna,
I've not created any shared folders manually and I've used the "Use domain of current user" option.
Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
<SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
Regards,
Varadharajan M -
Cluster Resource Failed in Clustered Role
Hello All.
We’re running our VMs on the Cluster of Hyper-V hosts of Windows Server 2012 R2.
We frequently encounter the following error in the Cluster Events:
“Cluster resource 'Virtual Machine VM123' of type 'Virtual Machine' in clustered role 'VM123' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart
it. Check the resource and group state using Failover Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.”
VM123 is the hostname of VM. We encounter this error for most of the VMs, however the VMs keep running in the cluster.
Anybody please guide me what this error mean.
Please help and advise.
Regards,
Hasan Bin HasibHi Hasan Bin Hasib,
Since in your description there don’t have others detail clue, in your current information we can get the VM123 resource at failed status, you can first run the cluster validation
to verify whether your cluster configuration is correct and install the Recommended hotfixes and updates first.
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
https://support.microsoft.com/en-us/kb/2920151?wa=wsignin1.0
Understanding how Failover Clustering Recovers from Unresponsive Resources
http://blogs.msdn.com/b/clustering/archive/2013/01/24/10388009.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.
Hi All,
Last week we face problem on SQL server 2005 Cluster server.
SQL cluster was down with below issue.
Event 1069 : Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.
Event 19019 : [sqsrvres] CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
Kindly any one provide resolution for my above issue.I have checked in event viewer Application error side error:
Event 19019 : [sqsrvres]
CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
System error :
Event 1069 : Cluster resource 'SQL Server' in Resource
Group 'MSSQL' failed.
Before this no error is there in event viewer -
Grid Infrastructure Does Not Start Cluster Resources
Hello Gurus,
I configured a 2 node RAC cluster using VirtualBox.It has been running fine all along and each time I started one of the nodes, I will definitely see all of other Cluster Resources will be started eventually.
However, after I left it untouched for a month (VM is stopped), I found out that after starting up the machine, only local resource which is ONLINE.
This is what I get:
[grid@oel6-112-rac1 bin]$ ./crsctl status resource -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.CRS.dg
ONLINE ONLINE oel6-112-rac1
ora.DATADG.dg
ONLINE ONLINE oel6-112-rac1
ora.FRADG.dg
ONLINE ONLINE oel6-112-rac1
ora.LISTENER.lsnr
OFFLINE OFFLINE oel6-112-rac1
ora.asm
ONLINE ONLINE oel6-112-rac1 Started
ora.gsd
OFFLINE OFFLINE oel6-112-rac1
ora.net1.network
ONLINE ONLINE oel6-112-rac1
ora.ons
ONLINE ONLINE oel6-112-rac1
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 OFFLINE OFFLINE
ora.LISTENER_SCAN2.lsnr
1 OFFLINE OFFLINE
ora.LISTENER_SCAN3.lsnr
1 OFFLINE OFFLINE
ora.cvu
1 OFFLINE OFFLINE
ora.oc4j
1 OFFLINE OFFLINE
ora.oel6-112-rac1.vip
1 OFFLINE OFFLINE
ora.oel6-112-rac2.vip
1 OFFLINE OFFLINE
ora.racdb.db
1 OFFLINE OFFLINE Instance Shutdown
2 OFFLINE OFFLINE
ora.scan1.vip
1 OFFLINE OFFLINE
ora.scan2.vip
1 OFFLINE OFFLINE
ora.scan3.vip
1 OFFLINE OFFLINE
and these are my other resources
[grid@oel6-112-rac1 bin]$ ./crsctl status resource -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE oel6-112-rac1 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE oel6-112-rac1
ora.crf
1 ONLINE ONLINE oel6-112-rac1
ora.crsd
1 ONLINE ONLINE oel6-112-rac1
ora.cssd
1 ONLINE ONLINE oel6-112-rac1
ora.cssdmonitor
1 ONLINE ONLINE oel6-112-rac1
ora.ctssd
1 ONLINE ONLINE oel6-112-rac1 ACTIVE:0
ora.diskmon
1 OFFLINE OFFLINE
ora.evmd
1 ONLINE ONLINE oel6-112-rac1
ora.gipcd
1 ONLINE ONLINE oel6-112-rac1
ora.gpnpd
1 ONLINE ONLINE oel6-112-rac1
ora.mdnsd
1 ONLINE ONLINE oel6-112-rac1
Where do I supposed to check to see why the Cluster Resource like SCAN Listener, Database and etc not running?
I've been checking on the logs but I haven't figured out what I should be looking at.
Can some body help me?
Thank you in advanced,
AdhikaHi Freddie,
I saw these lines on that Clusterware alert log:
2013-07-01 22:39:20.084
[crsd(3338)]CRS-1012:The OCR service started on node oel6-112-rac1.
2013-07-01 22:39:20.208
[evmd(3145)]CRS-1401:EVMD started on node oel6-112-rac1.
2013-07-01 22:39:21.549
[crsd(3338)]CRS-1201:CRSD started on node oel6-112-rac1.
2013-07-01 22:39:22.715
[/u01/app/11203/grid/bin/oraagent.bin(3450)]CRS-5016:Process "/u01/app/11203/grid/bin/lsnrctl" spawned by agent "/u01/app/11203/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/11203/grid/log/oel6-112-rac1/agent/crsd/oraagent_grid/oraagent_grid.log"
2013-07-01 22:39:22.728
[/u01/app/11203/grid/bin/oraagent.bin(3450)]CRS-5016:Process "/u01/app/11203/grid/bin/lsnrctl" spawned by agent "/u01/app/11203/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/11203/grid/log/oel6-112-rac1/agent/crsd/oraagent_grid/oraagent_grid.log"
2013-07-01 22:39:22.772
[/u01/app/11203/grid/bin/oraagent.bin(3450)]CRS-5016:Process "/u01/app/11203/grid/bin/lsnrctl" spawned by agent "/u01/app/11203/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/11203/grid/log/oel6-112-rac1/agent/crsd/oraagent_grid/oraagent_grid.log"
2013-07-01 22:39:22.811
[/u01/app/11203/grid/bin/oraagent.bin(3450)]CRS-5016:Process "/u01/app/11203/grid/bin/lsnrctl" spawned by agent "/u01/app/11203/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/11203/grid/log/oel6-112-rac1/agent/crsd/oraagent_grid/oraagent_grid.log"
2013-07-01 22:39:23.069
[/u01/app/11203/grid/bin/oraagent.bin(3450)]CRS-5016:Process "/u01/app/11203/grid/opmn/bin/onsctli" spawned by agent "/u01/app/11203/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/11203/grid/log/oel6-112-rac1/agent/crsd/oraagent_grid/oraagent_grid.log"
2013-07-01 22:39:23.567
[crsd(3338)]CRS-2772:Server 'oel6-112-rac1' has been assigned to pool 'Generic'.
2013-07-01 22:39:23.568
[crsd(3338)]CRS-2772:Server 'oel6-112-rac1' has been assigned to pool 'ora.racdb'.
The I started looking in the /u01/app/11203/grid/log/oel6-112-rac1/agent/crsd/oraagent_grid/oraagent_grid.log file and found out that at the same time (2013-07-01 22:39:22),
I saw the following lines:
2013-07-01 22:39:22.433: [ora.CRS.dg][1644160768] {1:13152:2} [check] DgpAgent::getConnxn connection failure 1
2013-07-01 22:39:22.433: [ora.CRS.dg][1644160768] {1:13152:2} [check] DgpAgent::getConnxn failed CRS-5000: Expected resource ora.asm does not exist in agent process
2013-07-01 22:39:22.434: [ora.CRS.dg][1644160768] {1:13152:2} [check] DgpAgent::getConnxn try getInstanceInforWhenASMFail
2013-07-01 22:39:22.434: [ora.CRS.dg][1644160768] {1:13152:2} [check] CrsCmd::ClscrsCmdData::stat entity 1 statflag 33 useFilter 0
But that does not prevent the asm from being started properly.
The only local resource that didn't start up automatically was the LISTENER.
The following command shows that the local LISTENER has hard dependency on ora.cluster_vip_net1.type which is the ora.oel6-112-rac1.vip
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.LISTENER.lsnr -p | grep -ie dependencies
START_DEPENDENCIES=hard(type:ora.cluster_vip_net1.type) pullup(type:ora.cluster_vip_net1.type)
STOP_DEPENDENCIES=hard(intermediate:type:ora.cluster_vip_net1.type)
NAME=ora.oel6-112-rac1.vip
TYPE=ora.cluster_vip_net1.type
START_DEPENDENCIES=hard(ora.net1.network) pullup(ora.net1.network)
STOP_DEPENDENCIES=hard(ora.net1.network)
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.net1.network -p | grep -ie dependencies
START_DEPENDENCIES=
STOP_DEPENDENCIES=
The ora.net1.network resource started properly and I didn't see that this prevent the ora.oel6-112-rac1.vip from starting up.
The following lines also show that the ora.asm resource is has a weak dependency only against the ora.LISTENER.lsnr
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.racdb.db -p | grep -ie dependencies
START_DEPENDENCIES=hard(ora.DATADG.dg,ora.FRADG.dg) weak(type:ora.listener.type,global:type:ora.scan_listener.type,uniform:ora.ons,global:ora.gns) pullup(ora.DATADG.dg,ora.FRADG.dg)
STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DATADG.dg,shutdown:ora.FRADG.dg)
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.CRS.dg -p | grep -ie dependenci
START_DEPENDENCIES=hard(ora.asm) pullup(ora.asm)
STOP_DEPENDENCIES=hard(intermediate:ora.asm)
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.DATADG.dg -p | grep -ie dependencies
START_DEPENDENCIES=hard(ora.asm) pullup(ora.asm)
STOP_DEPENDENCIES=hard(intermediate:ora.asm)
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.FRADG.dg -p | grep -ie dependencies
START_DEPENDENCIES=hard(ora.asm) pullup(ora.asm)
STOP_DEPENDENCIES=hard(intermediate:ora.asm)
[grid@oel6-112-rac1 bin]$ ./crsctl status resource ora.asm -p | grep -ie dependencies
START_DEPENDENCIES=weak(ora.LISTENER.lsnr)
STOP_DEPENDENCIES=
I'm a little lost here.
A suggestion would be very much appreciated.
Thank you,
Adhika -
The cluster resource could not be brought online by the resource monitor.
I'm installing Exchange 2007 CCR at a set of Windows server 2008 Virtual Machines.
When I refer the doc to Configure the Node and File Share Majority Quorum, at the step 3 -
Bring the new File Share Witness resource online by running the following command:
Cluster.exe res "File Share Witness (UNCPath)" /online
I got the following error:
System error 5018 has occurred (0x0000139a).
The cluster resource could not be brought online by the resource monitor.
How could I successfully Configure the Node and File Share Majority Quorum?Your link brings me back to this thread. Not sure why, as I was able to find the article you reference with this link:
http://technet.microsoft.com/en-us/library/bb676490(v=EXCHG.80).aspx
To ensure this works, you need to make sure the Exchange Servers group is in the Administrators group on the server hosting your FSW.
FYI, Microsoft suggests that the FSW be hosted on a hub server. This simplifies management, since the Exchange administrators will already be able to manage the server the FSW is hosted on, and all permissions are already in place for the messaging
system. -
Multiple Cluster Resource Names Possible?
Scenario:
We have 2003 R2 cluster resource groups that utilize multiple network name's per resource group to support legacy applications (and poor coding). These must now be moved to a 2008 R2 Failover Cluster. Is there a way to have only 1 IP address
assigned, but have multiple network names to a 2008 R2 Resource Group? The systems are already configured with the DisableStrictNameChecking and OptionalNames registry keys - but the cluster resource group is where I'm hitting a snag.
Any way to accomplish this? (Just add several names to the resource group using just the 1 IP)??
Thanks!
markHi Mark,
I think we may have the following options to workaround this:
1. Set several CNAMEs in DNS which point to the IP of your cluster.
2. Edit Hosts file on clients so all different names are point to the same IP (the cluster).
If you have any feedback on our support, please send to [email protected]
Maybe you are looking for
-
Itunes comes up with error report when i try to open it and then it closes
i have tried re installing quicktime and making sure that quicktime.qts and quicktimeVR.qtx are the only folders in my directory and it still wont work please help!
-
Update acrobat 7 pro to acrobat X
Hello, I bought Acrobat 7 professionnal and later the upgrade to Acrobat X Pro. no problem. Therefore, the update are not working : I can read : "Adobe\Acrobat10.0\Acrobat\JP2KLIB.dll." so, can you help me ? Many thanks Michel SABOUL.
-
Can you replace the battery in these units?
Can you replace the battery?
-
How can I export 1080i in best possible quality for internet streaming?
Sorry, I'm not too knowledgeable about this but I have Final Cut 6.0.4 and use/captured in HD-1080i. What's the best possible way to export this in great quality for internet streaming? What dimensions should I use? Any help would be extremely apprec
-
Saving XML to .sesx...will not open in CS6
Im trying to convert my legacy sessions into Audition CS6 sessions. Im successful at importing an XML created in Audition 3, but when i save it in auditionCS6 and try to re open it, i get an error message...saying the file is corrupt or unsupported.