He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side
hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur
Similar Messages
-
I cannot use Firefox for over a year now as I get a 404 error message; it is frozen on the Hulu site.
Are you using a bookmark or does this also happen if you type the address of the main (home) page of the website?
Bookmarked pages can become invalid, so you may have to enter the main page and then navigate to the wanted page.
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
Hello I am just wondering why there is a message of error 1004 when i tryed to make the update on my apps. Does someone know what it means?
Yes, many know what this means. You can too. Just type in "error 1004" in the search box at the top of this page. Or, just look to the right. You'll find many links in the "More Like This" box.
Always good forum etiquette to search for previous posts on the topic before posting. -
WS-C6509-E not supporting 256 MB disk. upon inserting message pops up but "no such device" error comes when runing "sh disk0/1:"
SUP = 720 and 720-3B
00:08:03: %FILESYS-SP-5-DEV: PCMCIA flash card inserted into disk1
Router#
Router#
Router#
Router#sh disk1
%Error show disk1: (No such device)
Router#
Its working fine with 128 MB Diskbut my 128MB disk is working fine in both SUP and both slots..
And this only proves that the PCMCIA slot is not at fault. So this means that:
256mb PCMCIA card is dead; or
256mb PCMCIA card is not standard (non-Cisco)
I do not believe the 256 mb PCMCIA card is not working because it's not formated. Even if it's not formated properly the error message would've been different. -
I get an Application Error message when installing TestStand 2.0
When installing TestStand 2.0 on a Windows NT 4.0 Workstation, following message appears when installing Engine: Application Error - The instruction at "0x685876b3" referenced memory at "0x685876b3". The memory could not be read.
Hello Eduardo,
This is a strange behavior, and I guess I have a couple of comments. TestStand works fine with Windows NT 4.0 but it needs at least Service Pack 3 installed. So make sure you have the SP installed.
In addition, make sure you use an administrator account when you install TestStand. Finally, you can try to install it on a different computer with the same OS just to make sure the CD is OK. If it works in the other computer, then there is something wrong with the original PC.
Regards,
Roberto Piacentini
Applications Engineer
National Instruments
www.ni.com/support -
I am trying to download from iTunes and getting message stating insufficient local storage. In usage screen, states I have 19 GB storage space. Pls help!!!!!
Jenniferwood2829 wrote:
... so I don't understand why I still get this message when I show I have 15GB available in iCloud?
It means you do not have enough Space on your Device and need to create More Space on Your Device by Deleting some items off your device. -
SRM 7 Upgrade : Exception when Check Status is clicked
Hi
We are trying to upgrade to SRM 7 and we get below error when we click on Check Status.
Any Pointers/steps to debug the issue?
Thanks
Nikhil
Method: GET_LAYOUT of program CL_POWL_PERS_ACCESSOR=========CP
Method: INITIALIZE of program CL_POWL_MODEL=================CP
Method: HANDLEDEFAULT of program /1BCWDY/DZDOZ86SV837808OS8Y3==CP
Method: HANDLEDEFAULT of program /1BCWDY/DZDOZ86SV837808OS8Y3==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/DZDOZ86SV837808OS8Y3==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CPHi,
I think the problem here is a missing entry for SAPSRMGP_E_CHECKSTATUS
or SAPSRM_E_CHECKSTATUS: the issue occurs when the powl application
id is not passed or if the application id is invalid.
The SPRO path for creating and maintaining the application ID is:
Cross application components-> General application functions->
Generic SAP business suite Functions-> Personalization ->
Help functions in personalization Environment-> Edit personalization
Hierarchy
You have to check in the dump (set a BP) to see if the APPLID is
SAPSRMGP_E_CHECKSTATUS or SAPSRM_E_CHECKSTATUS. But as we don't have
connection now, to test you can add the both ones in this path.
After this also you need to:
Configuration: Define Query Visibility at Role Level and Define Query
Visibility at Role Level also had to be maintained for
SAPSRMGP_E_CHECKSTATUS and SAPSRM_E_CHECKSTATUS
So in total you have to maintain:
1) Define Query Visibility at Role Level
2) Define Query Visibility
3) Edit Personalization Hierarchy
for SAPSRMGP_E_CHECKSTATUS and SAPSRM_E_CHECKSTATUS
I hope this helps
Kind Regards,
Lisa -
Hello B2B Gurus,
I am able to process B2B inbound files successfully from Trading Partner --> B2B --> BPEL. When it comes to BPEL i am not able to parse/transform the received XML as i am getting selection failures in assign and empty nodes in transformation. When i look at the input XML payload which i received in ReceiveB2BConsume Payload i observed that i am getting namespace as " xmlns="NS_495C37A0921C418BB66A86A6E75B2CA120070312140549" instead of actual namespace xmlns="urn:oracle:b2b:X12/V4010/856" which is in my XSD as well and i am getting the XML start tag <?xml version="1.0" encoding="UTF-8" ?> 2 times. :
<?xml version="1.0" encoding="UTF-8" ?>
<?xml version="1.0" encoding="UTF-8" ?>
<Transaction-856 xmlns="NS_495C37A0921C418BB66A86A6E75B2CA120070312140549" mlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedDate="2013-08-21T16:33:57" CreatedBy="XEngine_2956" GUID="{00C28978-0AA1-11E3-88B9-80C16E7DC6DA}">
<Internal-Properties>
</Transaction-856>
I went back and checked the XSD which i loaded in the B2B Console and i am having the following namespace
"<xsd:schema xmlns="urn:oracle:b2b:X12/V4010/856" targetNamespace="urn:oracle:b2b:X12/V4010/856" xmlns:xsd="http://www.w3.org/2001/XMLSchema" version="1.0" elementFormDefault="qualified">"
I am not sure why the XML translated from EDI in B2B console has the different namespace and XML start tag 2 times. Can you please help me resolve the issue. Let me know if i am missing anything.
Thanks in Advance..Hi,
Please set property as b2b.setDynamicNameSpace=false.
To use EDI ecs and xsd files from Oracle B2B 10g version, set this property to true.
When using EDI ecs and xsd files in Oracle B2B 11g which were used in Oracle B2B 10g, the XEngine may generate dynamic namespace for the translated xml. For example,
xmlns="NS_31CA8D0F33324F95A0BF15D85539C27E20060518215520"
To turn off dynamic namespace generation for inbound EDI messages, set this property to false.
Thanks
Satendra Pare -
When I try to play a movie I downloaded from iTunes on my apple tv, the error message I get says the apple tv is not authorized to play the movie. I reauthorized the computer to be sure it is authorized ( as per Apple advice).
Welcome to the Apple Community.
If this is the Apple TV 1, this is a new issue which started with any new protected content purchased after October 28.
You could de/re authorise your computer, disconnect and reconnect the library and resync your content, alternatively purchasing content directly from the Apple TV also appears to resolve the problem. -
Sending 2 messages from SAP but get 1 message in PI
Hi all,
This is a bit of a strange one but I have the situation where we send two idocs at the same time from a SAP ECC system to PI. The first idoc is processed but the second one just dissapears. Things I have checked:
SMQ1/SMQ2 on both systems - nothing there
Runtime workbench - the successful one is there but no failed messages
Sending two messages from another ECC system - we do get both messages - but this is a different interface (however the one with the problem is just a copy of the one which works)
Any ideas what this could be or what else I should be checking?
Kind regards
BenHi Mark,
Thanks for your quick reply. I have checked idx5 and there is only one message/TID from the sending system.
The other ECC system is owned by a different department so I will ask them to run SM58 to see if anything is stuck in there as well -
All of a sudden when I try to export images from LR to my HD...I get the following error
Unable to Export:
An internal error has occurred ?:0 atempt to index a nil value. What does this mean? How do I fix?Hi,
Same problem here. I am trying to export files from RAW format to JPEG. I am setting the output size to 2000k. I get the error message:
Attempt to index a nil value
The behavior is a bit random. If I export a large number of photos, some will work some won't. If I retry a picture that failed, it sometimes works or keeps failing. The input images are fairly similar in sizes.
In some cases, there is no error message but the new reduced-size image is not created.
Computer:
Windows 7 Professional
Intel Core 2 Duo
4 GB of memory
Hard-drive: 1 TB, about 700 GB free.
Lightroom version 5.5
Camera Raw 8.5
This export operation was working previously (i.e., previous version of LR). I installed the 5.5 version on June 28 2014. The bug is probably in the new version of LR.
System configuration (in French)
Version de Lightroom : 5.5 [968504]
Système d'exploitation : Windows 7 Business Edition
Version : 6.1 [7600]
Architecture de l'application : x86
Architecture du système : x86
Nombre de processeurs logiques: 2
Vitesse du processeur : 2,6 Ghz
Mémoire intégrée : 3326,1 Mo
Mémoire réelle disponible pour Lightroom : 716,8 Mo
Mémoire réelle utilisée par Lightroom : 446,1 Mo (62,2%)
Mémoire virtuelle utilisée par Lightroom : 557,4 Mo
Taille de la mémoire cache : 8,1 Mo
Nombre maximal de liens utilisé par Camera Raw: 2
Paramètre PPP du système : 96 PPP
Composition sur le Bureau activée: Oui
Affichages : 1) 1680x1050
Dossier de l'application : C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.5
Chemin d'accès à la bibliothèque : K:\Images\Lightroom\Lightroom 5 Catalog.lrcat
Dossier des paramètres : C:\Users\Dominique\AppData\Roaming\Adobe\Lightroom
Modules installés:
1) Behance
2) Facebook
3) Flickr
4) Module externe de prise de vue en mode connecté Canon
5) Module externe de prise de vue en mode connecté Leica
6) Module externe de prise de vue en mode connecté Nikon
Marqueurs Config.lua: None
Adaptateur n° 1: Fournisseur : 10de
Périphérique : 402
Sous-système : 50510de
Révision : a1
Mémoire vidéo : 243
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Haut-parleurs (Périphérique High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 1026
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: NVIDIA GeForce 8600 GT (Microsoft Corporation - WDDM v1.1)
ShaderModel: 10.0
Vendor: Nvidia
VendorID: 4318
Version: 10de:0402:50510de:00a1 -
Problems with syncing.. Anyone help?
This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502
-
Don't know that this is causing problems during utilization of Firefox but it's been happening for awhile. Seems to only pop up when I exit the internet.
Hi Ayaz_Shaikh,
What’s your host OS?
Do you install Windows 10 Technical Preview in Hyper-V? Or some else virtualization products?
Alex Zhao
TechNet Community Support -
After updating itunes to 11.1 and phone to ios7, I lost more than 3500 songs from my library. My ipod has 4185 songs less the most recent I purchased.
Is there no way an ipod can be used to restore the lost music? Yes, some of it was from cds but were done a long time ago. Obviously it was acceptable for me to compile this music then, now they want to say since it all wasn't purchased, I can't have what was already mine? Plus I do not use nor want to use the cloud, but it keeps creeping up even though I don't want or use it. HELP!See Recover your iTunes library from your iPod or iOS device.
tt2 -
before it crashed I was trying to take firefox to factory reset, my computer turned off before. I have a mac OSX 10.6
Check if you still have a profiles.ini file left if you've only deleted the Firefox profile folder:
* /Users/<user>/Library/Application Support/Firefox/
If you still have a profiles.ini file, but the profile folder is gone then delete the profiles.ini file to force Firefox to create a new default profile.
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
Maybe you are looking for
-
Hello, We have closed asset fiscal year by a combination of transactions AJAB and AJRW. Now the user wants to reopen the previously closed period for Asset Accounting. The transaction for this is OAAQ however it takes me to customizing. The transacti
-
On opening a new tab, i should get all the previously visited websites in small or medium tab format. How can i get that ? Please help me with that.
-
Can we config the SU as an input field in source of putaway sys-guided ?
Experts, If i want to do putaway system guided/by TO for SU managed materials , there is nothing that i need to scan in the source field and i can only see the SU,Storage bin input field in the destination screen(Can only config these two fields as i
-
JDK, JRE and JVM version used with PI 7.1 EHP 1
Hi, I wanted to know which is the right version of 1. JDK 2. JRE 3. JVM with PI 7.1 EHP 1. Thanks Gautam
-
Cache engine overloads, how to.....
i've cisco cache engine 505 attached with cisco 2611 router. Now whenever i reload my cache engine it performs its job for 5 minutes after that it overloads and cannnot perform its job and cache engine changes its state to bypass mode. What could be