Header data is not cmg in PA30 when updating from backend tables

Hi Friends
Am creating record for an employee in table pa0000, pa00001, pa0002 and some other infotype but when i go to PA30
tcode it shows me green tick for all these three infotype even in 0000 action i can click display and see second screen but
the header data is not coming on pa30 screen though pa0001 table has updated with all information except changedate and username .
Any idea how i can get that header data ?
Regards
Meeta

Try to create data for one employee directly in PA30 and check the header data. If still the data is not pulling though check the screen header configuration settings.
SPRO-> Personnel Management -> Personnel Administration -> Customizing User Interfaces -> Change Screen Header
I hope this will resove your issue.
all the best....

Similar Messages

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

App will not download to iPad when purchased from App Store - stuck with Cloud icon

Device : iPad Air 32gb wi-fi model (not cellular data)
OS version : 7.1.1 (up to date)
Location : UK
Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
Also a new icon appears on the home screen and a circle shows the progress of the download.
However this did not happen.
Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
The app does not download - in fact it does not even *attempt* to download.
I have tried this >20 times now and it always occurs excatly like this.
After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
I can re-download other apps that I have previously purchased on this iPad, with no problems.
I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
I have logged out of my iTunes account on the iPad, and logged back in.
The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
I have reset/rebooted my internet connection
In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
I have tried on 2 other wi-fi networks but still cannot download this one app.
My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
Nothing I try will download the app in question.
The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
(Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
I can't make it to an Apple Store to speak to a Genius.
Bearing in mind the list of things I've already tried, what do I do next?
Thanks in advance for any support.

Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help

Photos not opening in PS when opened from Bridge. [was:Question]

Photo's not opening in PS when opened from bridge, this has been happening for the last few weeks. I will be working in PS and opening from bridge OK, then suddenly I will open about 6 photo's but they only show the tabs at the top of the screen but no photos. I have to close PS and reopen before they show. Can anyone help it is driving me crazy. Tks

The odds are you chose the logical file rather than the correct file as your external editor:
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-external-edito r/

Firefox does not appear on screen when started from the start menu, but task manager says the process is running

Firefox does not appear on screen when started from the start menu or the shortcuts, but task manager says the process is running.

No - I get the message basically saying "Can't run program while Firefox is running. Please close down Firefox & try again".
I rebooted my computer and it all works now - but that's weird it was happening before. Kinda weirded out that it happened at all.
To avoid that happening again, I still wanna know what to do to avoid it or fix it for next time. Thanks

I just purchased a new Linksys E2500 router. It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.

I just purchased a new Linksys E2500 router. It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4. When I try it responds that the password is invalid. I have connected my MacBook Pro, iPad and iPod Touch with the same password.

Charles Swigart wrote:
It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.
Try putting $ (a dollar sign) in front of the password.

When updating from Firefox 3.6 to 9.1 should I first un-install 3.6??

When updating from Firefox 3.6 to 9.1 should I first un-install 3.6??
I want a clean install of 9.1 but would like to keep all my settings, cookies, passwords, dictionary, etc.
Running a Windows 7 machine.

There is no need to uninstall the older version. you can update it.. go to help in the menu bar> then take> about firefox >then update the same..You can keep all your items in the new version..

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

InDesign crash when updated from InCopy

From 2007 to last week I have never had any issues with InDesign and InCopy. LOVE the way they work together.
Upgraded to CS6 two weeks ago... Put one set of papers out last week with some odd things happeing where InDesign would update an InCopy edit and they seconds later it would be out of date again.
Now this week all updates from InCopy crash InDesign.
This is driving me crazy. I have started replacing content with InCopy files just to have them show up out of date... and any update crashes InDeisgn.
I have no idea how I am going to get through this weeks paper.
Any help out there???
Thanks
Chris
Windows 7, one is brand new... all CS6 all fresh clean installs...

OK... this is gettin worse.
Now I cant place a PDF.
I moved all files to my local computer, still haveing issues!
Completely unacceptable!

Retriving data from backend tables

Hi All,
I have one requirement to retrive the data from backend tables.
Is there any code to retrive only the first row of table from backend.
Please provide me any solution for this.
Thanks in Advance!
Thanks & Regards,
Sreelakshmi.

Hi,
create a remote enabled rfc with export parameter IT_RESULT TYPE ZSSHDR(transp. table).
use code :
DATA: itab type table of ZSSHDR .
select * from ZSSHDR into table itab .
Read table itab into it_result index 1.
in RFC.
use this rfc in ur DC.
Amit

Idoc Receiver - Header Data does not update

Hi there
I have an Idoc receiver in a scenario where I send a Idoc from a file to the R/3 system. My config is all fine but the Idoc status in we19 shows red. My Header data for the idoc is incorrect. The idoc is WALREQ01. In my Message Mapping Im setting the SDNPOR, SDNPRT, SDNPRN, RCVPOR, RCVPRN to the correct values and the I activate the scenario but in we19 it still shows the incorrect idoc header. It does however change the idoc segment data, just not the header. Is there maybe some other place I have to set the Idoc header data?
Thanx,
Jan

Hi Jan,
From help.sap:
Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values. See also: Fields of the IDoc Control Record
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm
Carlos

Data is not Base64 encoded - error when starting Weblogic connecting to IS

I get the following error trying to connect to Identity Server from weblogic 7.0 via the weblogic java policy agent from Sun:
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: Data is not Base64 encoded.
I have set the encode cookie to true on both the policy agent side and the Identity Server side. I have also restarted both, but still receiving this error.
Has anyone had similar problems? Any soluitions?

Hello,
I am getting the same error for a tomcat policy agent . Ihave installed Identity server on Solaris 9 and Tomcat 4.1.27 on the same machine. I set followinf property in policy agent's AMAgent.properties-
com.iplanet.am.cookie.encode=true
However, it doesn't help :-(
what else is to be done? The documentation says that modify AMConfig.properties file on the client side for this property. Howveer, i do not have AMConfig fil on tomcat side. so i modified AMAgent.property.
Is that ok?

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Data is not getting posted to R/3 from CRM

Hi to All,
When i am creating sales order in CRM data is not getting replicated to R/3. System is showing that B Doc is created , posted and validated. But here in CRM system outbound queue is generated but in R/3 there is no data in inbound queue.
Can anybody tell me the reason behind this?
Regards,
Anurag

Hi,
Could you please check the if the Site-R/3 in SMOEAC has the subscription All Business Transactions (MESG)? If not please create a subscription to the R/3 site.
If this doesn't work please update the post.
Hope this helps.
Thanks,
Karuna.

Why data in PSA doesn't change when update rule routine is modified?

Hello guys,
why data in PSA is not changed after I modifiied the update rule routine. I created a infopackage which is only to PSA, but it shows me any change. If I changed this infopackage to the one which is assigned to "PSA firstly, and then to Infoobject", then I saw the changes in infoobject, but in PSA, still nothing changed.
I can't figure out the reason. Any hint is welcome!
Thanks in advance.
Regards,
Liying

HI..
1) PSA data is like of source system data
2)Update rules are how you update your keyfigures to Data Tragets.
Since you have put upto PSA that is the first data staging in BW so there wont be any change of the data even if you write routines at update rules.
Hope it is clear
Reg
Ram

Header data is not cmg in PA30 when updating from backend tables

Similar Messages

Maybe you are looking for