Header Discount getting copied more than once

Hi all,
      I have a problem in Quotations in CRM-PCUI. We have renamed the pricing tab as 'Header Discounts'. If we try to copy quotaion, the header discount gets copied as many times as the number of products present for the quotaion, but on clicking save button all header discounts sum up and get consolidated into one. I want to know whether this is Standard SAP bahaviour and how can we change it? We want only consolidated total header discount to appear when we click copy quotation, and not on clicking save button.
I have assigned a Zclass to it and used some badis, but if i deactivate them and use standard class also, then also it behaves in the same way.
Any suggestions in this regard are highly appreciated.
Regads,
Rohit Khetarpal

Dear,
Please check: How to rescrict the user to enter a manual condition type once in pricing
Manul Condition type duplication control
Regards,
Syed Hussain.

Similar Messages

  • Ftp Adapter getting invoked more than once

    Hello All,
    I have an FTP polling on a remote server, the options that i chose are archive file after read. The problem is the bpel process is getting invoked more than once. If anyone encountered a similar problem, help is really appreciated.
    Thanks
    Krishna

    Hi Krishna,
    What release are you on? refer to metalink note: 730515.1
    In 10.1.3.4 MLR#7 this works:
    Add the below section within BPELProcess and replace the bits in upper case to suit your code:
        <activationAgents>
          <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
            <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
            <property name="portType">PARTNERLINK_PORTTYPE</property>
          </activationAgent>
        </activationAgents>regards,
    Shanmu
    http://www.prshanmu.com/articles/

  • Terminating Event Getting triggered more than once

    Hi All,
    I am facing a very peculiar problem in PR release workflow(item wise release, business object BUS2009).
    One of the requirements of the workflow is to send a mail to PR initiator once it is rejected by any of the approvers(4, in my case). The event associated with the cancellation of the workflow is REJECTION_START.
    The problem is that this event is being triggered more than once. One thing that i have observed is that if eg. second level of approver cancels it, the event is triggered twice. Likewise if third level of approver cancels it, it is being triggered thrice. Which leads to sending of 2 and 3 mails respectively to the PR initiators mailbox.
    Why is this happening? Ideally, only one event should have been triggered, and the triggering of the event should have been independent of PR approver's level. I am at my wits end regarding this.
    Any suggestions in this regard will be highly appreciated
    Regards
    Varsha Agarwal.

    If you check for 2nd level rejjection two release Code is associated so it triggers 2 times and same for 3rd level approval.
    I think you have to put some sort of filter using FM SAP_WAPI_WORKITEM_OBJECT
    in the attribute portion of yopur custom BO.
    The attribjute will check this FM and if it has entries that means already a Workflow has been triggered it should set the flag as X.
    Make use of this attribute in defining the start condition of this task thru
    SWB_COND.
    Thanks
    Arghadip

  • Heading for Report appearing more than once

    Hi All,
    I am running a report, the report contain more than 1 lakhs records, how can I avoid the heading of the report to repeat, because as of now heading information is repeating for 50 records.
    Please advice how to proceed on this issue.
    Thanks,
    Mohan R

    write the code like
    top-of-page.
    keep page condition..
    here write the heading
    or
    loop at itab.
    at first .
    here write the heading . This event will trigger only once ;i mean first record of the internal table
    endat.
    endloop.

  • Discount ZD00 showing more than once

    We have condition ZD00 to generate discounts, with a limit of 15% the problem its today one saleman simply put another line with the same code and SAP allow a discount of 23%.
    If someone has tackled this please help.
    Regards,
    Carlos

    Dear,
    Please check: How to rescrict the user to enter a manual condition type once in pricing
    Manul Condition type duplication control
    Regards,
    Syed Hussain.

  • How do I get my new Apple ID associated with an older MacBookPro so that I don't get charged more than once for a purchased app when I download it to the older computer recently upgraded to Snow Leopard?

    I recently upgraded my 2 year old MacBookPro to Snow Leopard so I could download Face Time and Final Cut ProX to it.
    I've already purchased the apps and installed on my iMAC and Macbook Air.
    After downloading Face Time I received the following mail;
    "Your Apple ID, *************, was just used to purchase FaceTime from the App Store on a computer or device that had not previously been associated with that Apple ID.
    If you made this purchase, you can disregard this email. This email was sent as a safeguard designed to protect you against unauthorised purchases.
    If you did not make this purchase, we recommend that you go to iforgot.apple.com to change your password, then see Apple ID: Tips for protecting the security of your account for further assistance.
    Regards,
    Apple"
    I don't want to be charged twice for these apps, especially Final Cut ProX, so how can I get the MacBookPro associated with the Apple ID I'm using now?
    Cheers

    This is probably a new precaution that Apple has taken to alert folks that something has occurred with their account that has not occurred before*, namely a Mac has downloaded something from their account that has not done so before. And as the notice says, if it was you doing so, then you may safely ignore the notice. Also, do not be alarmed, Apple refers to all downloads as purchases, even when they are free.
    But if you are truly concerned about the notice then you can authorize the Mac with your iTunes account, which should be the same as your MAS account. Open iTunes on the older Mac and sign into your account. Then in the Store menu choose Authorize This Computer. Now this Mac is definitely associated with your account and can now play media that you purchase from the iTunes Store as well.
    *My banks do the same thing when I pop up making a purchase with my bank cards somewhere in the world I have never made a purchase before. They call me and email me and want to know if it is indeed me using the card.

  • Prepared statement st in servlet - not executing more than once!

    Hi,
    my problem is that the following piece of code in a servlet does not get executed more than once:
    myQuery = "DELETE FROM MREMINDERS WHERE username=? AND reminders=?";
    PreparedStatement st = conn.prepareStatement(myQuery);
    st.setString(1,usern);
    st.setString(2,oldRem);
    st.executeUpdate();
    st.close();
    The above code is called in a servlet to delete fields from a table. I call this code in a for loop from another method in the servlet. It executes the first time in the loop, but the second time onwards it throws an error!!! please let me know how to solve this ASAP since i am at the point of frustration now!!!
    thanx...

    Hi,
    sorry... i got it fixed!!!! :-)
    i was closing a JDBC connection which was generating that error!!
    thanx again..

  • Getting the same text more than once

    I keep getting the same numerous texts more than once from my friends and one of my friends even said that they were getting my texts out of order. Is it my phone or the network?

    It's easy to burn another copy of a DVD if you have already burnt a copy of it before. Just click the "Format" icon in the toolbar. It will pop up with a window with some options. You shouldn't have to change any of these options, just make sure that the Output Device is set to your DVD drive, which it should be set to by default. Just click the "Burn" button, pop in a DVD, and you're good to go.
    If you've made a few changes to the DVD, you can use the "Build/Format" button in the toolbar. It will pop up with a window similar to that of the Format window. Click "Build & Burn." It will tell you that a VIDEO_TS directory already exists, and it can reuse as much of it as possible. You can then click "Reuse" to build the new portions of the DVD, and then it will burn it on a DVD.
    Hope this helps.

  • Can I drag and drop a copy of my iTunes library from a portable hard drive more than once?

    Can I drag and drop a copy of my iTunes library from a portable hard drive more than once?  Not copy it, but actually drag and drop it into my music folder on my computer more than once if needed?

    rnavarrette wrote:
    Can I drag and drop a copy of my iTunes library from a portable hard drive more than once?  Not copy it, but actually drag and drop it into my music folder on my computer more than once if needed?
    Nothing is going to stop you from dragging it in multiple times, but what exactly are you trying to do?  Are you trying to get iTunes to look through the folder and pick up newly added song files?

  • Heading level hierarchy errors when topics are in TOC more than once

    I have discovered that the hierarchy in the Heading levels in
    the Printed Documentation will differ from than in my online help
    table of contents hierarchy, and that the problem is due to topics
    that are intentionally in the TOC more than once.
    For example, in chapter 5 of a particular help system the
    hierarchy should be:
    Heading 1 < Chapter 5 title from top-level book>
    Heading 2 <title of second level book>
    Heading 3 <title of topic that appears under second-level
    book>*
    What I actually get is:
    Heading 1 < Chapter title from top-level book>
    Heading 2 <title of second level book>
    Heading 4 <title of topic that appears under second-level
    book>*
    * This same topic appeared in an earlier chapter. In that
    chapter it was really at a Heading 4 level.
    Due to company styles, etc. we use a numbering system at the
    headings and in the TOC, so instead of
    5
    5.1
    5.1.1
    I erroneously get
    5
    5.1
    5.1.1.1
    This type of hierarchy issue appears multiple times in this
    particular document (which I inherited by the way.)
    Other than restructuring the document to not reuse topics in
    different places in the TOC, is there a solution or a workaround
    for this problem?
    What I am doing so far, is generating the Print Documentation
    one chapter at a time. As long as a topic is not reused with the
    same chapter, my hierarchy of heading levels is maintained;
    otherwise, it is not. Then I can put the chapters back together
    after fixing the few places that still have heading level problems.
    This however, will be quite cumbersome as this document is
    translated into nine other languages.
    I am using RoboHelp X5 for Word / Word 2003 for the source
    and most of the translations; RoboHelp Asian Edition, Simplified
    Chinese / Word 2003 for the Chinese translation. The heading level
    hierarchy error occurs in both versions.

    >> AF: I've commented in sections...
    Without Maintain Heading Levels, RH will apply heading levels
    to the books and then the topic levels will get bumped down. So a
    top level book will be Heading 1 and the Headings in the topic will
    get bumped down to 2, 3 and 4 etc. If then you have another book
    one level down so that it gets Heading 2 applied, the same topic
    but under the level two book would then get 3, 4 and 5 applied.
    That is not the original problem but hopefully we are agreed
    that is how things work on that.
    >> Yes - that is the expected behavior. When it didn't
    happen as expected, that's what led me to the discovery of the
    cause of the problem (topic reuse).
    Your problem was that firstly Heading 3 got bumped to Heading
    4 if the same topic was inserted into the TOC twice. I assume it
    was OK in the first instance, or is it that when you add it twice
    it goes wrong everywhere?
    >> Your assumption is correct. First occurrence is
    correct. Second, third, and fourth (yes - there is one topic that
    is used 4 times! ) are not correct based on TOC hierarchy.
    On the numbering, nothing surprises me. If you look at my
    site you will see that for RH HTML, i gave up on getting it right.
    I have had many queries on this and more than a few people have
    indicated they will work on the problem and get it working. I'm
    still waiting. There are many posts about outline numbering
    problems. Has anyone got it working satisfactorily?
    >> I don't really have numbering problems. The
    numbering is following the RoboHelp-generated hierarchy and the
    .dot template that I apply. It's just that the RH-generated
    hierarchy and its heading levels don't correspond to the "real"
    hierarchy because of the reuse issue.
    I have seen various Word gurus maintain that numbering has
    not worked entirely satisfactorily since Word 2! Also enough posts
    to convince me this is a Word issue, not a RH issue.
    If you want to create a new project and knock something up
    that demonstrates this problem, by all means zip it up and send it.
    I'll assume it will be a small project and zip to less than 5mb. If
    more, contact me first.
    >> Unless you have RoboHelp X3 Asian Edition,
    Simplified Chinese, there is really no need. I plan to either avoid
    the reuse issue in the source, or build the print doc in sections
    which is easy enough in RoboHelp X5 for the non-Chinese languages.
    It is in the older Asian edition where the problems are compounded
    by the omitted reuse topics. If you do have RoboHelp X3 Asian
    Edition, Simplified Chinese and want to experiment, I can send you
    a cut-down version of the project. Don't feel obligated though;
    unless you can read Chinese (I can't) it is very tedious to work
    with.

  • My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    So now that you have repeated the same thing three times that doesn't make things any clearer at all.
    You are copying files from where to where?
    How are you attempting to copy files, software or click and drag?
    Any other detail would be helpful.
    Allan

  • How do I get itunes to not list the same artist more than once?

    How do I get ituens to not list the same artist more than once?  I have tried editing the info, sorting different ways and sometimes it works and sometimes not...it's very frustrating to me to have the same artist listed multiple times...

    Setting a common Album Artist for each Album does most of the work. For deeper problems see Grouping tracks into albums.
    In general you need to make sure that all the values in the tags are used consistently. Same spelling, same capitalization, same accents, no leading, trailing, or multiple spaces, and each value of Artist, Album Artist or Album should only be associated with one value of Sort Artist, Sort Album Artist or Sort Album respectively.
    tt2

  • Statechart module: Using a master statechart to launch a slave statechart more than once without getting Error 1100 at Obtain Queue (No object of that name was found)

    Hello,
    I am trying to create a project using the statechart module, and one of the techniques I am trying to use is a "master-slave" statechart structure, illustrated by the code I have attached to this post (you probably need the statechart module installed to look at my example code).  The problem I have recently discovered is that the slave statecharts cannot be launched more than once without raising an Error 1100 at Obtain Queue.  I have gathered from a few other posts that the cause of this error is the fact that the First Call primitive is used by the Statechart module to initialize the statechart when it is first run.  This works fine for the first launch of the slave statechart, but the second launch and subsequent launches of the statechart fail on Error 1100, since the First Call primitive won't let the statechart initialize (the First Call primitive tells the statechart it has already been initialized (this isn't the first call), and the External Trigger function then tries to send an external trigger to a queue that doesn't exist).
    What I can't gather from those posts is the correction I need to make to get this design to work.  I tried to send the slave statecharts a boolean flag for the "Init?" terminal, to force a reinitializing of the slave statechart.  I couldn't get that to work.  I tried to not load the slave sub VI as a slave sub VI, and launch it using some VI Server code, so that maybe the slave sub VI would be loaded and unloaded, therefore causing the statechart to properly initialize, but I couldn't get that to work either.  What correction should I make?  How do I get this to work?
    I really want to use this design pattern, first of all since I wrote a lot of code already with this structure, and second of all, it makes a lot of sense to me.  How do I make it work?  If someone could post a version of my code that functions the same, but without the error, I would appreciate that.  If you don't have time for that, but would be able to outline the steps I need to take to get it to work, that would be helpful, as well.
    Thanks to anyone for any assistance they can provide.  If you need any other information, please let me know.
    Attachments:
    Statechart Sample.zip ‏431 KB

    Thanks, Deborah.  I tried this approach out, and it turns out you can't just wire a TRUE to the "Init?" terminal.  You have to wire a TRUE for the first run of the slave statechart, and then it has to become a FALSE.  If you wire a TRUE, it will constantly try to reset the statechart, which doesn't work.
    The master statechart has to keep track of whether it has called the slave statechart, and communicate that to the slave statechart.  On the very first call of the slave statechart, the "First Call?" function inside of the "Run Statechart" function will give a TRUE, which initializes the statechart properly, and then gives a FALSE from that point after.  After that, the "First Call?" function doesn't work anymore (it will always return FALSE), and an initial TRUE, with subsequent FALSE values, has to be provided manually.
    I attached a version that does this, which appears to work.  Let me know if it doesn't work for someone, or if you have a better idea to implement the correction.
    Thanks to everyone for the replies!
    Attachments:
    Master-Slave Statechart Sample.zip ‏439 KB

  • Duplicate entries / Employee is appearing twice in report (OR more than onc

    Duplicate entries / Employee is appearing twice in report (OR more than once)
    When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
    I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
    Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
    And how to fix this bug
    Thanks and Regards
    Jaydeep Jadhav

    Hi,
    Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
    1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
    2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
    Delete adjacent duplicate is may  not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
    Hope this information will help you.
    Regards,
    Narendra.Soma

  • How to use a picture more than once in the light table?

    when i drag a picture from my browser to the light table i get the number 1 in the thumbnail. the book suggests that we can drag more than once the same picture in the light table but i have not yet figured out how to do it? any ideas?

    Indeed it do, I have that book, and you and I have both proven, beyond any doubt, the authors are incorrect.
    I tried all weekend to build a light table display that would print on half of a piece of paper. I figured I'd just select all, duplicate or copy and paste and set up another display just like it. That way, I'd print one sheet, trim it in half and have two nice assemblies of the same images. Took me many hours of dicking around to arrive at my lame non-solution.
    Hope someone else gives us both better advice.
    bogiesan

Maybe you are looking for