Header Freight

Hi All,
I have an issue with Header Freight condition type.
I have maintained Rs. 88 in header condition, and have four different line items in the sales order. As a header condition total freight value of the document is Rs. 88 and this can further distribute equally to all the four line items as Rs. 22 each. But each line item in sales order is capturing Rs. 88 instead Rs. 22.
Can anyone guide me to get the right value distributed among the line items from header condition. even if it is not distitributing (Displaying) in line item will also do but it should not get the same as header value in all the line items as  the present condition (Rs. 88 in each line item).
Points will be alocated to the right suggesstion.
Regards,
Jay.

>
Jayatheertha55 wrote:
> Hi All,
>
> I have an issue with Header Freight condition type.
>
> I have maintained Rs. 88 in header condition, and have four different line items in the sales order. As a header condition total freight value of the document is Rs. 88 and this can further distribute equally to all the four line items as Rs. 22 each. But each line item in sales order is capturing Rs. 88 instead Rs. 22.
>
> Can anyone guide me to get the right value distributed among the line items from header condition. even if it is not distitributing (Displaying) in line item will also do but it should not get the same as header value in all the line items as  the present condition (Rs. 88 in each line item).
>
> Points will be alocated to the right suggesstion.
>
> Regards,
>
> Jay.
In m/06, turn on the GROUP CONDITION check under GROUP CONDITION tab in your condition type, and your header condition will be evenly distributed to the line items.

Similar Messages

  • Distribution of Header Freight condition among items

    Dear All,
    I have a Header freight condition which is manual. IWhen I give the Value of this header condition as 100, I want that this value gets distributed amongst the items proportionate to the item value.
    Actually I am seeing that if I give the Header condition value as Rs 100 manually, each line item shows freight value as 100 so if there are 4 line items the totall freight becomes 4 X 100  = 400.
    Please tell me if there is a way to get the header val;ue distributed in the items proportionate to the item values.
    Regards,
    Avinash

    Hi,
    This is very much possible and we have done it in our project very very recently.
    Just mark the condition type as Group condition and then assign the group condition routine 1(overall document) in the condition type.
    Now if you enter the condition type manually at header level, you can see that the value is assigned to all the items proportionately.
    Do let me know if you need any help on this

  • Header Freight Condition Value to be Spread at Item Level

    Dear All,
    There is an issue i am facing.
    We have a freight condition (header level) in a Stock Transport Order
    There are say 6 line items in the STO. The functional requirement is that the Header Freight Condition Value has to be inventorised on the line items in ratio of their value. Also the header freight amount should get spread only on specific line items ( say of a particular material type )
    Please help me with this issue.
    Regards,
    Adams P

    Dear RamShiva,
    I think below forum document will resolve your issue.
    http://scn.sap.com/docs/DOC-43356
    Regards,
    Haresh Panara

  • Header Freight condition should only attract Full Tax i.e. Tax classification '1'

    Hi Experts,
    I have a scenario for German Sales and wondering if anyone has come across this.
    I have created a manual Freight condition, marked as a group condition. In pricing I have materials attract 19% and 7% Tax so the Tax on Freight is calculated with both the 19% and 7% Tax. Germany only want to apply a 19% tax on Freight. How do I get this done? Any Alternative Calculation type I could use to overcome this?
    Your help is much appreciated.
    Thanks,
    Sal

    I think the crux of the issue here is : being a group condition, when this header freight is being divided into its line items, based on the line item, the tax which is being applied is different.
    I can think of a solution as below, please suggest if this is correct :
    1. Make freight and its tax as Only Header conditions.
    2. Make a new condition for Freight + Tax - this condition will be made a Group Condition
    3. Now in the pricing, make sure that NO Tax is applied on the freight value as this particular value (coming down from Header will already have Tax added to it).
    So the scenario will be like below:
    Header : Freight = 100
                   Tax @ 19% = 19
              Freight + Tax = 119 ---- This will be divided among the line items.
    Line
    1. Material A - Cost = 200
         Tax @ 19 %  = 38
         Value without freight = 238
         Freight = 119/2 (considering equal division between lines) = 59.5
         Total Value = 238+59.5 = 297.5
    2. Material B - Cost = 230
         Tax @ 17% = 39.1
         Value without freight = 230+39.1 = 269.1
         Freight = 119/2 (considering equal division between lines) = 59.5
         Total Value = 269.1+59.5 = 328.6
    This is what I can think of, please feel free to suggest and improve

  • Posting Header Freight to separate account with idoc INVOIC02

    Hi,
    I am using idoc type INVOIC02 to post a cross-company code invoice.  There is freight at the header level in the invoice and I want the freight amount to hit a different G/L account than the rest of the document. From the help documentation, it looks like I should be able to set the flag in T076S-KOKSEPA, and this should then take the amount in segment E1EDK05 and place it in a separate line item segment in the Idoc.  Once it's in its in a separate segment then I should be able to use settings in table T076I to direct it to a separate G/L account.  However, when I set this flag inT076S-KOKSEPA the system is not doing anything with the amount in the header segment..
    Does anyone have experience with this?  If I set the flag in T076S-KOKSEPA what should I expect to see at the item segment level? Should I get an additional E1EDP01 segment?  If not, what's the best way to get header freight to post to a separate account?
    Thanks,

    Hi,
    You need to add a record in T076I using OBCB transaction, fill EWLNR with the folllowing concatenated values from E1EDK05 :
    - E1EDK05-ALCKZ (the value is - or +)
    - E1EDK05-KSCHL
    In my case T076S-KOKSEPA doesn't work, I got an accounting item corresponding to header condition but no more accounting lines corresponding to invoice items...
    But it works fine using T076S-KOPSEPA to post conditions at item level.
    Your questions :
    - Does anyone have experience with this ?  > We are still waiting ...
    - If I set the flag in T076S-KOKSEPA what should I expect to see at the item segment level ? > Nothing, this parameter works later, when the idoc is processed to create the accounting data (function IDOC_INPUT_INVOIC_FI not function IDOC_OUTPUT_INVOIC_IV_MM)
    - Should I get an additional E1EDP01 segment ?  > No
    - If not, what's the best way to get header freight to post to a separate account ? > It is the best way, but you can try at item level (T076S-KOPSEPA), in my case it works immediatly.
    My question :
    When the flag is set at header level (set the flag in T076S-KOKSEPA), an accounting item is created for the header condition, but how this value is allowed (- or +) on the other accounting items ?

  • How Header freight calculating.?

    Hi Gurus,
    We are using the Freight in Header Condition. I maintained two line items in the Sales Order. So the Header freight is splitting irregularly for two line items( in item conditions) . How it is happening? Any formula is there?
    Thanks and Regards,
    jyothi.

    Hi,
    the header condition type are those condition types which are aplicable to all the item in the document .
    it is possible that during sales prder processing you keep on entering or deleting item , hence every time the system will have to recalculate the value of the header condition type for the items . hence only when you save the document the condition value is reflected .
    By  Condition grouping we split data in items.
    Thanks,
    Raja

  • Freight charges in PO at header level

    Hi Friends,
    I have created a PO having 10 line items. I dont have individual freight charges for each line item.I have total freight charges for the whole PO. I have defines a freight charge at header level.I want the system should devide the whole freight charges among the line items as per the value. But when I enter any value in the header freight condition type, its simply multiplying the freight by 10. The system is not dividing the freight charges amonth the line items as per their valuation.
    Please guide me and suggest how to do the settings in customization so that system should divide the freight charges as per line item value.
    Thanks & Regards
    Satya

    HI,
    Go to M/06.select the frieght condition type and tick the group condition indicator and Group condition routine as 1 Overall document .and then enter condition value at header level in PO.
    reward if helpful.
    Regards,
    Chetan.

  • Header condition for Freight charges

    Gurus,
    What happens when i create the Freight charges as a header condition.Is it possible to work with planned delivery charges with header freight condition

    Hi.
    If you maintain freight charges as header condition, it can be counted as planned delivery cost.
    If you have several items, the value of header condition will be distributed to the each item
    per the item price.
    ex)
    item 1 :  1 pc * 60 usd
    item 2 :  1 pc * 40 usd
    Header condition : 10 usd
    Then 6 usd will be add to item 1 and 4 usd will be added to item 2.
    Best regards.
    Keiichiro Abe

  • Freight costs in header of purchase order distributed automaticallyto items

    Hi!
    I have entered "Freight" condition at header level (percent) in the purchase order;  if I entered let's say a percent of 20% for freight in header PO, the system puts 20% at every item. What I would like to do is to enter total value  for  "Freight" in header PO and the system to distribute this value to all the items in the purchase order as per their value or per their quantity. I don't want to enter "freight" for every item in the purchase order. Could you please tell me how should I do that?
    Thanks.

    Hello,
    % condition will apply same percentage in all the lines. If it is a flat rate and if 'Group Condition' check box is selected in Condition definition (SPRO), then header freight will be distributed among the lines.
    Thanks,
    Venu

  • Freight condition value at header level for PO

    Hi
    In the PO header freight condition i have given 150RS.
    There are two items in the PO.
    Item1 qty 10 price 10rs/each
    Item2 qty 20 price 20rs/each
    Freight value for item1 is 30rs and unit price of the item is becomg 40rs/each
    Freight value for item1 is 120rs and unit price of the item is becomg 140rs/each
    I want 150rs to be apportioned among the two items like
    30rs for the 1st item
    120rs for the 2nd item
    But the unit price is gettiing increased abnormally.
    PLease suggest how to catter this.
    Regards
    Soumen

    Hi,
    To distribute the price across all the item then for that particular condition type tick the group condition and header condition in
    M/06
    If you tick the group condition then price will be distributed across all the items proportionally.
    Try this and see.
    Raj

  • Free goods but want to freight cost updation upon GR

    Hi,
    Scenario:
    I have a PO with 20 line items and header freight cost.
    There are few more items in PO which are ticked as free goods.
    There is a stock of those materials with certain MAP.
    Freight condition has been configured as vendor GR so that it gets loaded on materials upon GR.
    Requirement is that
    Upon GR of this PO,MAPshould get updated with the freight cost for those materials also which have been marked as free goods.
    How this can be achieved ?
    Regards,
    manOO

    Hi Rang,
    Thanks for the feedback.However service PO is out of scope as client do not want to go for servicees.
    I could not understand your suggestion
    <u>you give PO to frieght vendor for freight value & in remarks you mention reciving as FREE GOODS from vendor xxxxx & do GR load cost to material & pay to freight vendor. (this is not advisible, but one solution for your problem).</u>
    I have to receive one material via purchase order as a free item but I need to pay vendor for the freight charges that will be incurred to ship this item along with all the other items in the same PO.
    Can you please explain me further as what you mean to say in your post.
    I should be able to load these freight cost on all the materials in PO including the material with 'free' indiactor.
    In short upon GR MAP should affect with freight cost as there will not be value addition of the material since received as free.
    Please suggest.
    Thanks in advance
    Regards,
    manOO

  • Freight vendor invoice before MIGO--please suggest

    Hi,
    I have a requirement.
    I have a PO with 20 line items and i have got a header freight condition with different vendor assigned to it in condition.
    Now I want to pay to freight vendor even before the goods are received.
    In short, I will post Vendor(freight supplier) Invoice by MIRO refering to the delivery cost before GR.
    However, since I have not done the GR , it will be a very hectic way for me to apportion the freght cost(say 1500 us$) in to all the 20 items as system will not suggest me anything in the amount and quantity columns.
    However, I want to pay to the freight supplier so I do not have to worry about the quantity.
    But since the quantity and amount is not suggested I will have to have the precalculation and I have to put the exact calculated amount on each line item.
    Can not this be avoided or is there any better way for this.
    I know this is not standard requirement but if there are 200 items then imagine how difficult it would be.
    Please suggest.
    Regards,
    manOO

    Hi,
    this calcualtion part has to be dealt in manual calculation. but total value comes on the right side of MIRO for your information.
    Regards
    Rang

  • Freight -Group conditon not getting Reflected at an item level in Delivery.

    Hi SAP Gurus !,
    I want to draw your kind attention towards my problem.
    1.  I had created a delivery with a header freight conditon type ZF00,the same conditon was getting reflected in all the item,But   after sometime i deleted that condition from header conditon tab and saved the delivery.
    2. After creating an invoice w.r.t. delivery,system is showing freight amount in an invoice.
    3.After i have checked in delivery,ZF00 is still there at item level, even after i deleted that one at header level.
    4.Now i want to use the same invoice without freight.(I don't want to cancel that invoice)
    Regards,

    Hi,
    1st of all check with user why the freight cost dont want to transfer to invoice.
    Once the invoice is created, you need go to each item individually in the condition type and you can try to delete it from there. But before that make sure your condition type is tick with delete option in the condition type.
    Hope my solution can help you get some idea.

  • Issue in scenario of freight in Po

    Hi,
         We have 100 items in the PO that has to be procured through a single PO only. the issue is out of these 100 items in the PO, 80 items are having header Freight condition and the remaining 20 are having freight as line item condition.
    One PO separately for freight cndition as header and a separate for line items is not required to be created .
    all these 100 items have to be in a single PO.
    Pl help on this!
    regards

    Hi Charlie,
                  this is the way currently client is doing in the legacy system. whereas my undertsanding goes this cannot be done.
    the business process is like this, it cannot be changed.
    all the items that are procured in the PO has to be bought in a single PO. we suggested to client that to make separate PO for the items that have header freight condition and separate Po for the items that have item condition as freight condition.
    these items are connected to each other. I cannot give the exact example here as the client process details are need to be kept confidential.
    I am trying and testing with this scenario, may be get chance to learn more on pricing schema, even though the problem doesnot get solved.
    Pl see , since you are a very senior guy .
    thanks, regards

  • Document link broken when only coping freight to AR credit note

    Scenario
    1.  Create an AR invoice (with item lines and header freight value of $10)
    2.  Open AR invoice and select 'copy to AR Credit note'. NOTE:  Base document link in active in the window. 
    3.  Delete right click each line and select 'delete line'.   All lines have been deleted from the AR Credit note.  NOTE:  when the last line is been deleted the base document link changes to inactive.  NOTE:  the header freight value of $10 is still active in the credit note.
    Can you please advise why this is happening?  Should this be happening? 2007A SP01 PL 08
    Thanks in advanced Lisa

    Hi!
    Even you can do that by booking a standalone invoice and Reconcilling the partial amount with the original invoice. Use BP Internal Reconcillation Window - Amount to Reconcile field

Maybe you are looking for