Header in .rtf template should not come on the first page?
Hello,
I developed a custom AR statements report, in the report I to print repeatedly from the second page ( it shouldn't come on the first page header), how can I do this.
Please input your comments?
Thanks,
Sridhar
you can use different page header and footer have develope the report in 2 pages or only one page .
if you develope the report in 2 pages
in the first page remove header and use different first page header property in word and paste the header in second page.
Similar Messages
-
RTF Template: table that goes to the next page
Hi All,
I am building an RTF template.. The basic layout consists of one page only, and there's a table in it. Depending on the data, there can be quite a few rows. For some reason, if the data does not fit on the first page, the entire table shifts onto the second page. However, the table should start on the first page independent of the row count. Once again, your help would be very much appreciated. :)
Regards, MatildaHi Vetsrini and Amit, thanks a lot to you both.
What you suggest works well when there is only one template row that is repeated... I actually have two template rows in the table, since depending on certain elements in the data row different handling is required. Is it so that I would need to work everything into the same template row to get this row-break-accross-pages-functionality?
The funny thing is that the table breaks properly for page 3, 4, etc (with a longer data), just that it starts only at the second page.
Regards, Matilda -
Safari it will not advance past the first page of a PDF Document
Running Safari 5.1 under Snow Leopard 10.6.8 on a d MacBook Pro when I try to read a PDF document in Safari it will not advance past the first page. I get the first page of the document in the browser window. No navigation in the toolbar, the up, down, right and left arrows do nothing nor does the return/enter key.
If you are using Adobe Acrobat > Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
-
Sales BOM Header Material should not come in J1IJ or delivery
Hi,
We have one depot plant, Now i am using the sales BOM, I have created one Material header with item category LUFM pricing at item level only, BOM is created, When I am entering the Header material in SO then alll child items are coming, then while creating the delivery all the child items and also the header items is coming in the delivery but same is coming in the J1IJ also I want that the header materal should not come in the J1IJ and it will be better if it is not in delivery if i set the indicator delivery block for header materia in SO then that item si not coming in Delivery but SO is shoing in Open SO as the header material is not delivered.
So is there any setting for this.
Also in quotaion I have maintain the item category assignment I have assign QT - LUFM - AGN
but whhen I am entering the header material in VA21 Ffor which the item category is LUFM system is giving the error message
No item category available (Table T184 QT LUMF )
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 7:56 AMHi,
Yes I want that the Header material should not come in J1IJ only. but i check the program of J1IJ it is selecting all the materials ref. to delivery number without any further check. also is it possible insted of SO if first we create the quotation in quotation therr willl be header material as well as child item but in SO only child item should get copy when creating ref. to that quotaion, I try with item category copy control, but then system is selecting non of the materils from Quotaion to SO, and when I allowed coopy control of header material from Quotaion to SO then it is copying Header as well as child items in the SO.
regards,
zafar
Edited by: zafar karnalkar on Nov 24, 2011 10:53 AM -
Problem in the main area of the table not coming on the same page
Hi Experts,
I have created a invoice in the table header with descriptions and main area with the values,below main area i have also created a template in smartform for calculation when i have assigned this to a transaction and i goto printpreview my main area and the calculation template are not coming in the same page,and the calculation and the header template goes to next page without main area,even if i decrease the size of main window my problem does not get solved.Is there any way out.
Please Help
RegardsHi Summet ,
Just check in the form where your writing the code if theer are any new lines before your calculation template .
It happens that may be the form you write is unabl;e to accomadate your window size .
Try this!
Hope it helps!
Much Regards ,
Amuktha . -
Page Break In XML Publisher RTF Templates Are Not Working
Please refer to the Metalink Doc below:
Subject: Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID: 559111.1
Type: PROBLEM
Modified Date: 24-MAR-2008
Status: MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks -
Landscape in RTF template does not work
Hi,
I try to generate an XLS (Excel) document from a RTF template built with Word and the BIP Desktop tool.
Before saving the RTF template, I go in page setup and set the layout to "landscape".
When I generate the final document, and open it in Excel, if I go to preview the document is in portrait mode, not landscape.
How can I do to have the landscape mode ?
thanks.Development has previously confirmed that Page Orientation is not supported for Excel output (ref. bug 8435974). There's an open ER / bug 9818198 which you may want to track via My Oracle Support.
-
Text visibility only in Print Preview Mode & Should not come in Hard copy !
Hi All,
Is it possible to have a text which is visible only in Preview but should not come in Printed hard copy ?
Regards
AjayHello,
In the FM OPEN_FORM of your print program you will be passing whether it's print preview or not in the Options parameter
i.e.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'Z_SAMPLE'
OPTIONS = itcpo
Just have an if statement in the SAPScript to only print this when that value = 'X' (i.e. IF &itcpo-tdpreview& eq 'X').
Regards,
Michael -
Field should not display in the subtotal row in ALV report after sorting .
we have a requirement, after sorting and subtotaling, the output in ALV is -
vbeln amount1 amount2 amount3
123 11 12 13
123 12 13 14
123 23 25 27
133 11 12 13
133 12 13 14
133 23 25 27
Now the customer wants the ALV outpput in this fashion -
123 11 12 13
123 12 13 14
23 25 27 --->123 (vbeln) should not come in subtotaling row
133 11 12 13
133 12 13 14
23 25 27--->133(vbeln) should not come in subtotaling rowHi,
if it helps you could create a hierachy. In this way you can define the field catalog for the lines and for the subtotal columns. The only thing is that you would always show the subtotal rows.
You have references of hierachy alvs in
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c060fcb4-2c62-2b10-d2b2-f32407a5cc6f
ALV Hierarchy
alv hierarchy
In this case it also sorts
Sorting for ALV hierarchy
I hope it helps.
Edited by: Oscar Pecharroman on Aug 2, 2010 1:13 PM -
the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?
Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
- I tested the headphones and speakers on other devices: they work fine.
- When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
Many thanks indeed!
NG -
My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.
This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
1. Take off bottom case
2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
3. Press and hold power button for 5 seconds
4. Plug a charger in, and it should start booting up
5. After shutting down again, reconnect the battery and close the case up
6. It works! (hopefully, if you guys had the same situation I did) -
How do I call the subvi in parallel with main VI. Main vi should not wait for the subvi
I have a subvi which takes the parameters like port name, transmit rate, message to transmit over serial port and Start/stop flag. This subvi calls VISA write vi in a loop continuously, till the Start/Stop flag is false, to write a message to serial port at a mentioned transmit rate. This subvi will be called from another VI. Actual intension is to transmit different messages to different ports continuously and stop them when required. In this senario, please provide solution for below points:
1. How do I call the subvi in parallel with main VI. Main vi should not wait for the subvi.
2. How does main vi can control already running subvi in parallel to it. In the above example I would like to start the subvi from main vi when start\stop flag is true and would like to stop it when the flag is false.
3. How do I call the subVI with one set of parameters from main vi, when same subVI is running with other set of parameters already from main vi(subvi being called in a case with different set of parameters each time when the case is called). Means, how do I keep track of reentrant subvi (different calls to same vi)from the same main vi.Hi Dharani24,
Try if these are helpful,
http://digital.ni.com/public.nsf/allkb/DB92C44E7D4D8A1B862577CB007D9C45
http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/asynchronous_vi_calls/
http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/reentrancy/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13 -
Hello i have what I think is a first generation Ipod touch which did not come with the App store already downloaded onto it, can I not download apps to my Ipod touch?
If you have a 1G iPod you can update to as far as 3.1.3. Yu get hat paid update here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
You can identofy your iPod here:
Identifying iPod models
What iOS is curently on your iPod (Setting>Genral>About>Version) you need as lest 2.0 for apps but most apps need 3.0 or later. -
found out i can't update ipod touch 4th generation to ios7 which is now required to use facetime. have used facetime for several years with family now can't use. Apple should not take away the capabilities you already have paid for!!
No correct, you do not need iOS for FaceTime. You only needed to update to iOS 6.1.6.
Unable to make or receive FaceTime calls after April 16, 2014
If you are having problems:
iOS: Troubleshooting FaceTime -
Bridge CC does not come to the front, when opening file from explorer
Hi everybody! Please let me now if there is way to solve the following problem:
When Adobe Bridge CC is opened in the back and I surf through files in Windows Explorer, after I double-click the file I want to view, Bridge does not come to the front, like normal image viewers do, it opens the file normally, but unfortunately for me it stays in the back. And I want it to show up every time I open an Image!
Thank you in advance!
Win7, 64bit, Adobe CCAny App in Windows opened in the background has the ability to show up every time it is called... Except Bridge for some reason...
If I double-click MP3 file - Windows Media Player shows up, even if it running in the back
If I double-click a text file - Notepad shows up, even if it running in the back
But if I double-click an image file - Bridge just stays in the back
Maybe you are looking for
-
Camera raw changes color in adobe bridge and photoshop
Hi all, I am quite new to use RAW. I have raw files that I want to edit. Unfortunately, the moment I click on the raw files, the color changes. Is there anything I should do to the color setting? I am using a canon 20d and Adobe Photoshop, Bridge CS
-
Exchange server 2010 mail limitation
Hi, We have exchange server 2010 cashub1 and cashub2 and also we have edge1 and edge2. my requirement is, i want all the exchange user to set limit of internal and external as 10 MB, except just 5 to 10 user we need to set limit as 50MB. Can you plea
-
Insert row wherever within a table?
Can it be done? Looking to add and delete rows wherever needed within a table. Currently, it only allows me to add or remove either the very first row or the very last; not those in-between. My users constantly request the ability to insert where nee
-
Here is the issue that I am having. I made a 15 sec animation in 3d. I got it to render so that I can play it before trying to save it for web services. I then try to save it for web services and it crashes after a few minutes. I am able to see the b
-
help