Header is not updating
the header is not updating , all other data is updating no probs.
before publishing web site i am using seotool for tags and analytic code and webcrusher.
what can b wrong?
what can b wrong?
Need more information before we can offer any suggestions. What's the URL of your site so we can examine it first hand? After applying SEO Tool and optimizing with WebCrusher how are you uploading the site's files to the server? What ftp client are you using?
OT
Similar Messages
-
Line item for header material not updating in COEP table
Hi all,
from last few days, I found that when I do confirmation and GR for process order, system is updating all line ( i.e. components, activity types) but line for header material that is finished goods or semi finished goods is not updating in COEP table, I have done GR for order and transferred stock from quality too.
But still its not updating. What could be the reason for it .
Thanks
Vivek VarunHi Krishnendu,
Thanks for the reply , FI document is not getting generated.
What could be the reason for it, as before it was working fine.
Thanks
Vivek Varun -
Transfer Order Confirmation not updated in Header level (Table: LTAK)
Hi,
We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
It will be a great help if anyone have solution to these issues.
Thanks & Regards,
NagarjunHi Nagarjun,
do you have any Z code in-between ? Did you check OSS notes ? Did you apply all patches to your system ?
What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
Many thanks,
Enrico -
PGI status at delivery header level has not updated
Dear Friends,
We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
I think there might be some table which was not update. Is there any way to update the status in the delivery?
Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
Please suggest me how should I complete this.HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla -
Ship to Address at line level not Updating to Ship to address at header
Hi All,
While Importing Sales Orders using DTW ,The Order header is correctly updating the logistics Ship to address we mentioned in Address2 Filed . However, the lines is defaulting the shipto address from the Business Partner.The Lines needs to show the same address as the header.
Issue is in SAP 2007 A SP-01 PL-10.
Thanks,
NeetuHI Gordan,
Thanks for reply.
We are setting ship to code as blank at header level and specifying ship to description.We want similar to be copied to line level.
When entering Orders manually,it is updating corretly but when importing using DTW taking address from BP for LIne Items.
If it updates correct address manually entering orders ,it should update while importing using DTW.
Thanks,
Neetu -
Changing Handling unit weight does not update delivery header weight
Dears,
when we pack an item on a palett, system calculates tara-weight + material weight = gross weight and inserts this value to the likp-btgew. this is correct.
now it happens, that shipping departement uses a scale to get the 'real' weight of the handling unit. if the weigth differs, they change the loading weight of the HU. system calculates correct the new gross weight of the HU.
But when going back to delivery view, the likp-btgew is not updated. Do we miss a setting?
thanks a lot for your help!
Michaelwrong forum
-
Can not update request in data target
Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
ThanksHi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks -
i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
String syncBoName="ZCON";
String syncKey="0001230297";
tableViewBean.setString(syncBoName +" "+syncKey);
System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
tcp = TableContentProvider.instance(syncBoName);
tcp.modifyTable(syncBoName,syncKey); return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
System.out.println("state:" +resp.getSyncBoResponseState().toString());
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
resp.acceptClientSyncBo();
String b=resp.getSyncBoResponseState().toString();
resp.delete();
System.out.println("state1: " +a +"state2: " +b);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
public void listAllOutDelta(){
SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
MeIterator allDelta;
try {
allDelta = deltFac.getAllDelta();
while(allDelta.hasNext()){
SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
+" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
} catch (SmartSyncException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (PersistenceException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void SetSendType(){
SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
public boolean setHeaderFieldValue2(
SyncBo sb,
String headerFieldName,
Object value) {
SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
//RowDescriptor trd = sbd.getTopRowDescriptor();
System.out.println("bp 10");
RowDescriptor trd=sbd.getRowDescriptor("010");
System.out.println("bp 11");
FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
System.out.println("fd:" +fd.getFieldName());
if (fd != null) {
BasisFieldType bft = fd.getFieldType();
//Row header = sb.getTopRow();
System.out.println("bp 12");
//Row header = null;
Row[] header=null;
//try {
//header = sb.getRow("0001211181");
//header=sb.getTopRow();
header=getItemInstances(sb,"010");
if(header==null){
System.out.println("is null");
}else{
System.out.println("not null");
//} catch (PersistenceException e1) {
// TODO Auto-generated catch block
// System.out.println("Exception getRow:" +e1.getMessage());
// e1.printStackTrace();
System.out.println("bp 13");
try {
// Integer operator
if (bft == BasisFieldType.N) {
System.out.println("Numeric");
NumericField nf = header[0].getNumericField(fd);
if (nf != null) {
BigInteger ii = new BigInteger(value.toString());
nf.setValue(ii);
return true;
} else {
return false;
// Character operator
if (bft == BasisFieldType.C) {
System.out.println("Character");
CharacterField cf = header[0].getCharacterField(fd);
if (cf != null) {
cf.setValue(value.toString());
return true;
} else {
return false;
// Decimal operator
if (bft == BasisFieldType.P) {
System.out.println("Decimal");
DecimalField df = header[0].getDecimalField(fd);
System.out.println("bp 1.1");
if (df != null) {
System.out.println("bp 1.2");
BigDecimal bd = new BigDecimal(value.toString());
System.out.println("bp 1.3");
df.setValue(bd);
System.out.println("bp 1.4");
return true;
} else {
System.out.println("bp 1.5");
return false;
// Similar operation for time and date operator fields
if (bft == BasisFieldType.D) {
System.out.println("Date");
DateField df = header[0].getDateField(fd);
if (df != null) {
if (value.toString().equals("0")) {
Date dat = Date.valueOf("0000-00-00");
df.setValue(dat);
} else if (!value.toString().equals("")) {
Date dat = Date.valueOf(value.toString());
df.setValue(dat);
} else {
Calendar cal = Calendar.getInstance();
java.sql.Date bd =
new java.sql.Date(cal.getTime().getTime());
df.setValue(bd);
return true;
} else {
return false;
// Similar operation for time and date operator fields
} catch (SmartSyncException ex) {
System.out.println(ex.getMessage());
} catch (PersistenceException e) {
System.out.println(e.getMessage());
return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
yzme yzme<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
MeIterator iter;
SyncBoResponse resp;
try {
iter= errorConflictInbox.getAllSyncBoResponses();
while(iter.hasNext()){
resp= (SyncBoResponse)iter.next();
String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
String state=resp.getSyncBoResponseState().toString();
String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
String msg=resp.getText();// This will return the exact message from the server
System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
System.out.println("syncStatus:" +syncStatusComplete);
}catch (Exception e) {
e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
String a=resp.getSyncBoResponseState().toString();
String a1=syncBO.getSyncState().toString();
resp.acceptClientSyncBo(); //No transaction stated to commit
resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment... -
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Dreamweaver Teamplate with Library Item for Navigation/Sidebar not updating editable classes
I have a Dreamweaver Template that contains two Library items. One Library item is my navigation bar, the other is a sidebar that shows different content depending on what page you are on. I'm assigning an editable class "active" to the navigation bar to show you are on a particular page, and also assigning the editable class "active" to the sidebar to reveal a portion of the sidebar with links pertaining to that specific page. The default value for the class is "hidden". So what is happening is when I open a page I have created and "edit" the Library Items in it to edit these classes, it resets resets all the other pages on the site to the default class values. How am I able to use editable classes and Library Items to achieve this kind of functionality? The idea is to only have ONE navigaton bar to update on the site and to only have ONE sidebar item to update. Here is an example of the sidebar and navigation in action so you can see what I'm going for. Notice the green button in the navigation bar (that is a list item with the class "active" which is an editable class in the Library Item, also notice the tan links in the sidebar, that is an unordered list that has an editable class of "active" in the Library Items --- these editable classes reset to their defaults when updating the Library Item on the website).
http://www.brumleve.org/joe/temp/CAP/mission.htmlIn my understanding, whenever you edit the contents of a library item, it will update all other occurances of this library item on the rest of the site. That's "working as designed" as far as I know, unless you break the link by telling it to not update - which kinda defeats the purpose I think.
But theres another way to do this using template properties, i#ve been using this approach myself a couple of times:
Write your navigation bar in the template (.dwt) file itself, then select the class= of your first menu item and choose .. (names might be off, I am using a non-English copy of DW): "modify > template > make attribute editable" from the main menu. Do so for all your menu items and name these new template properties something like "item_x_class"
You'll end up with something like this in your template source:
<div class="@@(item_1_class)@@">
and a matching
<!-- TemplateParam name="item_1_class" type="text" value="active" --> in the header
Now, on each page, you can set the class within the template properties dialog ("modify > template properties"). If your main menu changes, it won't overwrite your template properties, but still update all pages when you do make a change to the menu.
If you're using multiple templates for your site, consider nesting templates, so the master template already includes your navbar and all subsequent templates will "inherit" changes to the navbar code (sans the editable class property).
Hope this helps.. or at least gives you an idea for further experiments..
Stephan -
Firefox-hg not updated in a while
I have been using firefox-hg for quite a while, and have been happy with it. Recently, I noticed that it has not updated, even though I update quite frequently.
It keeps failing, so I ran the install specifically and recieved the following output:
5:59PM % yaourt -S firefox-hg ~ (knute) pts/1
==> Downloading firefox-hg PKGBUILD from AUR...
x firefox-hg.desktop
x PKGBUILD
x firefox.install
x mozilla-firefox-1.0-lang.patch
x firefox-hg-safe.desktop
x firefox.sh
x mozconfig
Comment by: Det on Fri, 11 Feb 2011 09:35:56 +0000
In which point did you think of actually fetching the sources?
Comment by: mutantmonkey on Tue, 15 Feb 2011 02:53:52 +0000
The package seems to work fine without any code to fetch from Mercurial.
Erus: Thanks, I can try that out the next time I update.
First Submitted: Wed, 18 Jun 2008 02:27:28 +0000
firefox-hg 62212-1 : Standalone web browser from mozilla.org, latest development version
( Unsupported package: Potentially dangerous ! )
==> firefox-hg dependencies:
- gtk2>=2.16.2 (already installed)
- gcc-libs>=4.4.0 (already installed)
- libidl2>=0.8.13 (already installed)
- mozilla-common (already installed)
- nss>=3.12.3 (already installed)
- nspr>=4.8 (already installed)
- libxt (already installed)
- hunspell>=1.2.8 (already installed)
- startup-notification>=0.10 (already installed)
- pango>=1.24.0 (already installed)
- desktop-file-utils (already installed)
- cairo-tee (already installed)
- libpng>=1.2.24-3 (already installed)
- libjpeg (already installed)
- lcms (already installed)
- mesa (already installed)
- libproxy (already installed)
- mercurial (already installed)
- zip (already installed)
- pkgconfig (already installed)
- diffutils (already installed)
- imagemagick (already installed)
- python2 (already installed)
- xorg-server (already installed)
- autoconf (already installed)
- libnotify (already installed)
- wireless_tools (already installed)
- yasm (already installed)
==> Continue building firefox-hg ? [Y/n]
==> ------------------------------------
==>
==> Building and installing package
==> Determining latest hg revision...
requesting all changes
adding changesets
transaction abort!
rollback completed
** unknown exception encountered, please report by visiting
** http://mercurial.selenic.com/wiki/BugTracker
** Python 2.7.1 (r271:86832, Feb 16 2011, 20:59:04) [GCC 4.5.2 20110127 (prerelease)]
** Mercurial Distributed SCM (version 1.7.5)
** Extensions loaded:
Traceback (most recent call last):
File "/usr/bin/hg", line 38, in <module>
mercurial.dispatch.run()
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 16, in run
sys.exit(dispatch(sys.argv[1:]))
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 36, in dispatch
return _runcatch(u, args)
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 58, in _runcatch
return _dispatch(ui, args)
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 593, in _dispatch
cmdpats, cmdoptions)
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 401, in runcommand
ret = _runcommand(ui, options, cmd, d)
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 644, in _runcommand
return checkargs()
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 598, in checkargs
return cmdfunc()
File "/usr/lib/python2.7/site-packages/mercurial/dispatch.py", line 591, in <lambda>
d = lambda: util.checksignature(func)(ui, *args, **cmdoptions)
File "/usr/lib/python2.7/site-packages/mercurial/util.py", line 426, in check
return func(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/mercurial/commands.py", line 736, in clone
branch=opts.get('branch'))
File "/usr/lib/python2.7/site-packages/mercurial/hg.py", line 337, in clone
dest_repo.clone(src_repo, heads=revs, stream=stream)
File "/usr/lib/python2.7/site-packages/mercurial/localrepo.py", line 1886, in clone
return self.pull(remote, heads)
File "/usr/lib/python2.7/site-packages/mercurial/localrepo.py", line 1295, in pull
return self.addchangegroup(cg, 'pull', remote.url(), lock=lock)
File "/usr/lib/python2.7/site-packages/mercurial/localrepo.py", line 1692, in addchangegroup
if (cl.addgroup(source, csmap, trp) is None
File "/usr/lib/python2.7/site-packages/mercurial/revlog.py", line 1336, in addgroup
chunkdata = bundle.parsechunk()
File "/usr/lib/python2.7/site-packages/mercurial/changegroup.py", line 173, in parsechunk
node, p1, p2, cs = struct.unpack("20s20s20s20s", h)
struct.error: unpack requires a string argument of length 80
==> ERROR: An unknown error has occurred. Exiting...
==> ERROR: Makepkg was unable to build firefox-hg.
==> Restart building firefox-hg ? [y/N]
==> -----------------------------------
==>
==> WARNING: Following packages have not been installed:
firefox-hg
6:13PM % ~ (knute) pts/1
It seems to have something to do with python, though, I don't have a clue what to do about it. I have searched the forums, and found nothing regarding this issue.
I just checked my pacman.log and found that the last time it was upgraded was a month ago.
[2011-01-20 04:45] upgraded firefox-hg (60681-1 -> 60915-1)
Any ideas?For installation issues with an AUR package, please use it's designated page instead of the forums: http://aur.archlinux.org/packages.php?ID=17820
Closing. -
Not updating G/L account and cost center with BAPI BAPI_PO_CREATE1
Hello Friends,
The two fields G/L ACCOUNT and Cost Center is not updated using BAPI BAPI_PO_CREATE1. I am unable to understand why? This is what i am passing to account assignment structure( POACCOUNT). Filled POACCOUNTX structre as well. I have passed company code at the header level.
PO_ITEM = 00010
SERIAL_NO = 01
CREAT_DATE = sy-datum
GL_ACCOUNT = 621000
COSTCENTER = 1000
CO_AREA = 4000
Please let me know why it is not updating anything i missed while passing?
2>I need to update GR quantity but this field is not available in the BAPI ..Please let me know how to update this field.
Any help is highly appreciated.
Regards,
RajHi, I have a problem I use the bapi BAPI_PO_CREATE1, I pass the table pt_poaccount in the parameter poaccount but the bapi when register my purchase order doesn't register correctly the values KOSTL, AUFNR, PS_PSP_PNR, NPLNR of the tablepoaccount and register the default values of the contract. Please i need help with this.
CLEAR s_poaccount.
s_poaccount-po_item = <fs_datos>-ebelp.
s_poaccount-serial_no = w_serial.
s_poaccount-costcenter = <fs_datos>-kostl.
s_poaccount-orderid = <fs_datos>-aufnr.
s_poaccount-wbs_element = <fs_datos>-ps_psp_pnr.
s_poaccount-network = <fs_datos>-nplnr.
s_poaccount-activity = <fs_datos>-vornr.
s_poaccount-quantity = <fs_datos>-menge.
s_poaccount-net_value = <fs_datos>-brtwr.
s_poaccount-creat_date = sy-datum.
s_poaccount-itm_number = <fs_datos>-ebelp.
s_poaccount-co_area = '1001'.
APPEND s_poaccount TO pt_poaccount.
CLEAR s_poaccountx.
s_poaccountx-po_item = <fs_datos>-ebelp.
s_poaccountx-serial_no = w_serial.
s_poaccountx-po_itemx = 'X'.
s_poaccountx-serial_nox = 'X'.
s_poaccountx-creat_date = 'X'.
s_poaccountx-itm_number = 'X'.
s_poaccountx-co_area = 'X'.
s_poaccountx-costcenter = 'X'.
s_poaccountx-orderid = 'X'.
s_poaccountx-wbs_element = 'X'.
s_poaccountx-network = 'X'.
s_poaccountx-activity = 'X'.
s_poaccountx-quantity = 'X'.
s_poaccountx-net_value = 'X'.
APPEND s_poaccountx TO pt_poaccountx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = pe_poheader
poheaderx = pe_poheaderx
IMPORTING
exppurchaseorder = pi_exppurchaseorder
TABLES
return = pt_return
poitem = pt_poitem
poitemx = pt_poitemx
poschedule = pt_poschedule
poschedulex = pt_poschedulex
poaccount = pt_poaccount
poaccountx = pt_poaccountx
poservices = pt_poservices
posrvaccessvalues = pt_posrvaccessvalues.
The BAPI is register with these values as default however i pass other values in table
pt_poaccount -
Excise Base amount not updated in J_1iexcdtl table -reg
Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*" VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*" VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*" KONV STRUCTURE KONV
*{ INSERT RDSK925285 1
TABLES : KONV.
data : W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
KAWRT LIKE KONV-KAWRT,
POSNR LIKE VBRP-POSNR,
END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
EXCITM_BASE = ITAB1-KAWRT.
POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*} INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumarsolved with the same user exit
-
RG23A PARTI & PARTII register & tab is not updating in MIGO by 103 105 mvt
Hi Experts,
I am doing MIGO by 103 & 105 movements. My problem is RG23A PARTI & PARTII register is not updating & also in Detail DATA (below the header details tab) Excise ITEM tab is also not coming.
I have done the configuration like LOG GEN->Tax on Goods Movements ->under business transcations->Incoming excise details->specify movement types involve in excise invoices.
Actually, after doing MIGO PARTI is updated in table J_1IPART1 but no values updated for J_1IPART2.
Can anybody help me?
Thanks
TruptiHello
as per you part1 values updationg while doing the time of migo and part2 values not updating while doing the j1iex post .
your not getting the excise tab on details so check the tax code mentioned in po assigned the co code or not ?
if your using the TAXINN procedure check the condition records in fv12.
check the j1id settings for material and vendor.
Regards
Laxman -
I have Sharepoint Foundation installed with the latest CU updates. It is running on a VMware box (Windows Server 2008 R2 Standard) with its backend on a SQL Server 2008 R2 vmware box. The farm account is a domain user and has been given all appropriate
replication rights, etc to active directory.
Everything seems to be working fine except for security integrated with AD groups. When I go to edit permissions I can add individual AD users just fine and remove them just fine and their access is taken away right away or given to them right away.
I can also find AD groups in the people picker and add them to the site. When I add new groups to AD, they are found immediately within Sharepoint, and when I delete groups from AD, they are taken out of the people picker right away. Now comes
the weird part. When I add an AD group to the site, all users currently within that AD group are given access to the Sharepoint Site. This works for the first time only. Now when I add or remove users from the AD groups, it does not update
in SharePoint. For example, I have an AD testuser1 in the AD Group "All Users". testuser1 does not have access to SharePoint. So I add the AD group to the Sharepoint group "Visitors". testuser1 now has read access to the sharepoint
site. Now, I remove testuser1 from the AD group, but testuser 1 still has access to the site even though he is not part of the AD group, nor does he have any individual permissions to the site. Now, I add testuser2 to the ad group. testuser2
does not have access to the site, even though he is part of the ad group.
It seems that the only time AD group security is working for me is when I first initially add the AD group to the site. From then on, it's like sharepoint is caching the members of the group and not updating any new adds or deletes from the groups.
Any ideas? I am lost on where to go from here as I have tried everything from clearing cache files, rebooting servers, iisresets....I think I have at least cornered the problem, but am not 100% sure yet that it is the correct answer. I think it could be 1 of the following 2 scenarios.
Scenario 1: We have 3 web applications setup on our web server ports 80 - Our sharepoint Web app, 2020 - Our My Site Web App, 2040 - Our Search Web app. We are using host headers (http://sharepoint.***.com) instead of a server name. So
we setup our access mappings (Central Admin -> Application Management -> Configure Alternate access mappings) to use the host header (http://sharepoint.***.com) as the default mapping and the server name as the intranet access mapping. By
setting the default access mapping to host headers, i noticed that Sharepoint automatically assumes that all web apps are on port 80. You can see this by going to (Central Admin -> Manage Web Applications). The port listed all 3 web apps on
port 80. So I think when I was doing a profile sync and using mysites, it was messing with my AD security because of this. What I did was the following. I went to Central Admin -> Manage Service Applications -> [Name of your user profile
service] -> Setup my sites. I made sure that my preferred search center had the correct port number on it (mine originally had no port number), that my my site host had a port (again no port number originally), as well as the personal site location.
I then saved this.
Scenario 2: Our user profile sync had 2 BDC connections that were corrupt and throwing errors. I rebuilt the connections, remapped them to the proper user profile property.
I did both of these scenarios above around the same time. I then restarted all my servers, and at last the AD Group security is now functioning appropriately. I have done multiple IIS resets and server restarts. The issue has only reappeared
once. After restarting the machine again, we were back to the AD groups functioning correctly. Because we had the issue reappear once after doing the above, I still do not feel 100% sure that either one of the above corrected the issue completely.
As long as we are up and running currently, I am moving on to other tasks with this project. My only concern that it will break again and I will have to revisit it is when we restart the servers....which is never fun. I will update as I find
a "true" answer to this issue.... Let me know if any of the above helped you or if you find something I may not have thought of.
Maybe you are looking for
-
Wireless Mouse and Keyboard don't work under bootcamp. Any suggestions?
I installed Windows 7 through Boot Camp. Everything works, but my wireless mouse and keyboard. If I add a wired mouse and keyboard, they work. Have reinstalled Bootcamp a few times, but when I try and add the devices. they are seen, but then can't pa
-
Special G/L Indicator exception
Dear All. We have no of Spl G/L indicators and we need to configure in FBZP, but system is not allowing all the Spl G/L indicators, Then we created one dummy Spl G/L indiactor and maintained in the exception list that g/L indicator, but sap not allow
-
WL5.1: Using JSPC with pages that include usebean tags
Hi All, I'm trying to get JSPC to correctly compile my JSP pages (which compile with no problems from within Weblogic itself) and for each page that contains a <userbean> tag, it seems as though java is trying to instant
-
Exit or BAdI - allow/disallow to change material desc
hi all experts pls you advise me for any Exit and/or BAdI that you have experience like my case i would like to allow or disallow to change material description in short text field at follow t-code :: ME51N Create Purchase Requisition ME52N Chang
-
safari quits on reopening laptop always and sometimes while using , with this in crash report. Library/Application Support/.iWellSoftAllto.tmp google chrome continues to work.