Header not showing up in PDF

I put a logo in the header of my form and it is not showing up on the saved PDF ~ any idea why?

Please read the FAQ at http://forums.adobe.com/docs/DOC-4144. If this does not help you resolve the issue then re-post to this thread.
-Jeff

Similar Messages

Custom Image(URL) not showing up in PDF

Hi,
We have created a standard webi-report where a company logo is part of the report header.
We would like to keep the company logo in a database, so we've creáted a simple webapp to retrieve the image from an Oracle database. When we insert the logo into our report we just use the following link as the Image(URL): http://<Servername>/plsqlapp/docs/Company.JPG
The logo now shows up as expected in the report as long as we view the report through InfoView. However, when we export the report as a PDF document, the logo will vanish.
If we use boimg://Company.jpg as the Image(URL) instead, it works OK even when exported to a PDF document.
We would however prefer to keep our images used in reports in a database.
BR
Carsten

From SAP BO support:
Upon further investigation of the issue, I found that there was a Technical Escalation raised for Enterprise under the Technical Escalation Id 5000072075. However, the product group rejected the TE stating that it is by Design.
Mentioned below is the Knowledge based Article which supports the above.
1324404 - Webintelligence report images are lost after save the report as PDF
Symptom
Webintelligence report images are lost after save the report as PDF
Reproducing the Issue
·         Create a new WebI report from Infoview using example efashion universe
·         Do any query and add a blank cell to the report
·         Select the cell and input "http://tomcat.apache.org/images/tomcat.gif"
·         Right click on cell and select Properties>Display>Read cell content as-->image URL
·         Save the report as PDF
·         Open the PDF file. The image is not included in the PDF
This issue reproduced on both XIR2 & XI3.0 & XI3.1
Cause
Presently, we donu2019t support URL picture from the internet for PDF.
Only embedded images as background cell can be exported in PDF.
Resolution
Only embedded images as background cell can be exported in PDF.

XML PO Output for Communication does not show barcode on PDF

Hi,
I am attempting to add a barcode to the PO Output for Communication XSL style sheet. I am doing this by calling 2 RENDERX XSL style sheets, the second containing an SVG template.
I have successfully accomplished this locally on my personal computer using FOP to generate the PDF (barcode appears perfectly). When I transfer the files to Oracle (the new custom PO XSL-FO style sheet in a template, along with 2 new templates for the 2 RenderX XSL stylesheets. The RenderX style sheets appear to be imported at runtime using calls similar to: <xsl:import href="xdo://PO.ALKS_CODE128_BARCODE.en.US/"/>
The PO Output for Communication report runs successfully with no errors or warnings, and all of the output appears EXCEPT for the barcode (remember this is SVG). Same thing happens when I View Document from the PO form.
Why does my SVG barcode not appear on the PO Output for Communication within Oracle, yet the same code runs perectly on my PC. I've looked into the Adobe SVG Viewer plug-in, but I do not have that on my local machine yet the barcode appears fine in the PDF. It seems the PDF should be able to show any image anyway.
Any suggestions would be greatly appreciated.
Thanks,
Suzanne

Hi,
I am not using a barcode font. I am using RenderX's XSL stylesheets to generate the barcode. As I said, the barcode generate's fine in the PDF on my computer but does not appear in the PDF when the code is moved to Oracle.
Thanks,
Suzanne

Bleed not showing in exported PDF

I'm submitting a postcard design to hotcards.com and am worried because the bleeds that I have are not showing when I create the PDF.
I've included the crop marks when exporting (and checked 'bleed marks'.) Don't know if I should submit with the crop marks, and I'm not seeing the bleed. My color (bleeds) just end at the margins.
Any advice?
http://cellocelli.com/design/CellocelliPostcardBack.pdf
http://cellocelli.com/design/CellocelliPoscardFront.pdf

First of all, you need to include the bleeds in your InDesign document; 1/8" is pretty standard for bleed in the US, but check with your printer to be sure. Start by including a bleed in your page layout: Document Setup > More Options > Bleed and Slug. Type .125" for all 4 bleeds (if you check the little chain icon on the right, you'll only have to type it once). This will add a red outline outside your page area to show where the bleed should be. Then you'll have to stretch your backgrounds to snap to the outer bleed lines.
When you export the PDF, click "Use Document Bleed Settings" (in the Bleed and Slug section of the dialog box). I also change the marks offset to 1/8" to match, just so they're not too close to the page area. That should give you a good PDF for the printer.
-Bill

Type not showing when opening pdf in Illustrator

Here's a strange problem that I don't recall having seen before.
I have a pdf file with diagrams of cupboards and tables with measurements. Everything looks o.k.
I open it in Illie (CS3) and everything shows up except the type. It is point type and only the points are there. I can drag over the type where the letters should be and there IS something there (coloured black according to the Color palette) but no recognizeable letters. I tried copying the type from the pdf and pasting into Illie but still no luck. I have the font (Syntax Roman) but the only way I can get it to work properly is to type the text in again manually. Any ideas please?

InDesign created this PDF and made the font a CID Identity-H font (not opentype, but similar in the respect that it has many more characters)
I am not an expert on this topic so you may get a better response reposting this here or in the acrobat forum with a new topic (eg: converting PDF CID fonts to .ai).
This tech note shows how to fix the problem if you have the original InDesign file.

Header not showing up in Firefox (but OK in IE7)

Hello everyone.
I'm hoping someone can help me with this situation. I'm
having a problem with my header sometimes not showing up in Firefox
2.0 (I'm using 2.0.0.13), yet it shows up fine in IE7. The problem
is intermittent, sometimes it displays as it should and other times
it's not there (the header is a JPG, 1000x125 pixels, around 25k in
file size). Sometimes clicking the "Go" button will make it appear
(other times not) and sometimes "refresh" will do the same or make
it "disappear" if it's already there. I'm using DW MX 2004 and I
don't remember having this problem before until just recently on
some pages that I made from scratch. Here is an
example of one of
the pages. So far it's a pretty simple layout using a table, a
header and a few horizontal buttons.
If it the header shows up in Firefox, please refresh or
reload and see if it no longer shows up.
I'm wondering if I should be doing something else in DW for
the header so that it will show up every time in Firefox. I can
post the code if I need to, or you can view it when you visit the
page.
Can someone please help?
Thank you

> @josie1one, can I ask what OS you are using? I'm not
sure if it matters,
> but
> I'd be curious to know with my results from using XP and
Win98.
WinXP Professional.
> @Dooza, It IS very confusing, ha ha. My viewing
>
http://www.beatleslane.com/zhtz/header01.jpg
works fine on my end.
>
http://www.beatleslane.com/header01.jpg
should NOT work because there's no
> such
> file in that location.
Not Dooza but you say without /zhtz/ it shouldn't work but
your code is:
<td height="125" colspan="5"><img
src="header01.jpg" alt="header"
width="1000" height="125"></td>
Note no /zhtz/ ??? Did you try what I suggested? Just for
laughs?
Jo
"CreativeSpurt" <[email protected]> wrote in
message
news:ftg0ge$p$[email protected]..
> @josie1one, I know what you mean by "It won't reappear
at all for me now.
> Fine
> in IE6 oddly". Sometimes I can't make it reappear in FF2
either, yet no
> problems in IE7.
>
> My main computer is a Win XP Home Ed., and it's the
computer I'm having
> this
> header issue with. As I mentioned, I tried it on a Win98
(with FF2) and I
> didn't have a problem (in limited testing). I just now
tried it on an old
> Win98
> laptop (also with FF2) and no problems there either. So,
the problem seems
> to
> only appear with my XP computer using FF. No problems
with NN9 or IE7 or
> Win98.
> And it sounds like josie1one has the same issue as me
viewing the page, so
> it's
> not just me.
>
> @josie1one, can I ask what OS you are using? I'm not
sure if it matters,
> but
> I'd be curious to know with my results from using XP and
Win98.
>
> @Dooza, It IS very confusing, ha ha. My viewing
>
http://www.beatleslane.com/zhtz/header01.jpg
works fine on my end.
>
http://www.beatleslane.com/header01.jpg
should NOT work because there's no
> such
> file in that location.
>

Custom Inserted HTTP Header not showing up in Iplanet Logs

ALL:
I have some iPlanet Enterprise/6.0 web servers sitting behind a LoadBalancer. The LoadBalancer is setup in an 'one-armed mode', and takes a client HTTP request passes it onto the server, but during this process, changes the client source IP to that of local static IP that the LoadBalancer has. Due to our setup we cannot change this.
By changing the client source IP to a local address, we have lost any useful user session tracking that was done by source IP.
To get around this, I have the LoadBalancer inserting an HTTP header with the client real source IP. Reading the NSAPI Programmer's Guide (Table 7-1 "http://docs.sun.com/source/816-5686-10/07_magnu.htm"), there is an option "%Req->headers.headername%" that can be used with 'flex-int' to log any header value.
My output from snoop looks as follows:
HTTP: ----- HyperText Transfer Protocol -----
HTTP:
HTTP: GET /plugin.do HTTP/1.1
HTTP: OrigClientAddr:10.5.4.28
HTTP: Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
HTTP: Accept-Language: en-us
HTTP: Accept-Encoding: gzip, deflate
HTTP: User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
HTTP:
I have set the value to "%Req->headers.OrigClientAddr%" and it still does not show up in the log file. Any clues?
Works fine in Apache with:
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{OrigClientAddr}i\" \"%{User-Agent}i\"" headerinsert
CustomLog logs/access_log headerinsert

Always nice to find resolution to one's own question.
Fix was to change the header value to all lower case.
From:
"%Req->headers.OrigClientAddr%"
To:
"%Req->headers.origclientaddr%"

Appraisal document header not showing up in the Portal

when I look at the appraisal document in Portal ESS MSS (using WD4A application Appraisal Document) the header of the appraisal document does not show up (in PHAP_ADMIN it does).
how can I show the appraisal document header in the Portal?
regards,
Tiberiu

>
Chris Thomas wrote:
> Do you know how to set the template such that the Header is expanded (displayed) by default ?
>
> Chris
hi chris, that would almost definitely only be available by doing a webdynpro enhancement to hap_main_document.

Bleed area not showing in a PDF exported from InDesign

Hi,
I created a document in InDesign with a border that goes to the edge. To make sure that the border doesn't get cut off in printing, I added a bleed and brought the border to the bleed to insure against that happening. However, when I export the file to a PDF, it doesn't show the bleed, even if I ask to include crop marks or bleed marks. Is there anyway to make sure the bleed shows in the PDF?
Thanks!

please check if the setting in the printer are correct and if the mark and bleed are included when exporting the PDF .
Also what is the PDF option that you are choosing and steps to recreate the issue or a screen shot please .
what PDF printer driver are you using ?
Help document : InDesign Help | Printer’s marks and bleeds

Smart quotes not showing up in pdf

I'm having problems with first, my quotes from Word (or like from an email, copied and pasted) are coming in as straight quotes and second, when I go to make a pdf, the "curly" quotes are not even showing up. I am new to CS4 and never had this problem in earlier versions. Everything is at the default setting. Please help, thanks!

Try the question here (and it helps if you give a bit more info about your system, your version, and what you are doing).
InDesign forum.

Word 2007 "Save as Adobe PDF" - Pictures not showing up in PDF

Good Afternoon,
I have run into this error recently when using the "Save as Adobe PDF" to publish Word 2007 report.
Each report has an table - pasted from Excel 2007 "as a picture - when printed". The reports have a ton of other jpg pictures.
After creation, when I open the PDF, some of the tables appear to have become transparent. Where the picture used to be is a selection box, as if there were a picture there, but it's merely blank. All of the photos, frames, and Word-based tables show up. Some of the pasted-from-Excel tables also show up, not these ones.
Is there a reason for this discrepency? Is there a way to resolve the issue? I used the search bar and found nothing that matched my issue. All of my software is up to date.
Thank you for whatever help you can provide.
J

did you ever solve this issue? I have the same problem and "view large images" is the only answer I can find and it DOES NOT WORK.
I posted the question elsewhere, but nobody has replied. here's my situation:
When creating PDF documents from any software (Illustrator, Corel, InDesign, etc), color objects over 50% of the page size have white fill. If object has an outline, the outline will appear normally, but the fill will be white. I've searched forums everywhere and have found no answer. Most forum topics on this are issue focus on settings in the program that exported the PDF. I am 100% sure this is not an export problem, but is something in Acrobat itself (a missed setting? Corrupt program file?)
To provide the best information, I've done a little scientific research. Here is what I know:
Currently running Acrobat Pro 9.5.5
This is only happening on ONE install of Acrobat 9. Documents display correctly in Reader X and in Acrobat 9 on other machines.
Started happening a few weeks ago, I have no idea what changed.
"Show Large Images" in preferences dialog is checked. Unchecking it and rechecking it does nothing.
Have installed all available updates to the software
I experimented with different object sizes. At 50% of page size, objects appeared normal, at 51% filled object disappears.
Does not affect photos, only affects vector objects.
running this on Windows Vista 64 Bit

HTTP Header not showing up

I am trying to add a authorization header to the HTTP Post, but it isn't showing up when my end point is https. It only shows up when my end point is http.
This is how my header is supposed to look like, but it only works when my end point is http.
Content-Type: text/xml
Authorization: Basic TWFyc2hmaWVsZDoidzMrJTFAJjJpIUk2
User-Agent: Microsoft (R) BizTalk (R) Server 2010
Host: ***.***.***
Content-Length: 54091
Expect: 100-continue
What should I do for this to show up with my https end point ?
I am using HTTP Adapter and I am trying to write authorization header using:
inmsg.Context.Write("UserHttpHeaders", "http://schemas.microsoft.com/BizTalk/2003/http-properties", "Authorization: Basic " + System.Convert.ToBase64String(System.Text.Encoding.UTF8.GetBytes(Username + ":" + Password)));
EDIT: I am using HTTP Adapter to accomplish this.

HTTP data packet/conversation is exactly same with
HTTP or HTTPS. Only difference is they are encrypted in HTTPS. May since they are encrypted you are not seeing the exact word “Authorization: Basic…” when you search for this text/string.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Bridge does not show dimensions for .PDF and .AI files

Is there any way to see the dimensions in cm (or inch) for PDF and AI files in Bridge? I'm using Bridge CS5 4.1.0.54 as part of CS5.5 Design Premium, have set the preferences in Bridge to show them, but there are no values in the metadata fields for dimensions in inch/cm. I don't know if this behaviour is normal or if there's something wrong with my installation...
TIA,
Matthias

May be 'dimension' is not the right word/translation. In my german version it says 'Abmessungen (in Zoll)' or 'Abmessungen (in cm)', which should mean something like 'dimension' or 'size'. DIN A4, A5, US Letter, Legal etc. pp. in cm or inch.

Top bar does not show for displaying PDFs in browser

The top bar (the one that has: File-Edit-View-Documents-Tools-Window-Help) displays when the Preference is set to NOT display PDFs in my browser. But when I set the Preference to display PDFs in my browser, the top bar does not display.
How can I get the top bar to display when my Preference is to display PDFs
in my browser? That is the manner in which I use Acrobat Reader 90 percent of the time.
I am using Acrobat Reader 9 which I just downloaded yesterday, my operating system is Windows XP (with Service Packs 1 and 2) and my browser is Internet Explorer.
Can anyone here help me? Or is there a better place to get help on this?
Milton Beychok

Well the problem is that, in Windows, the menu bar is owned by the application. When you view the PDF in the browser, the browser owns the menu bar and chooses what to show. Hence it shows only the browser items and not the Reader menus. If you view it outside the browser, Reader is running stand-alone and shows it's menu items.
I think, all you can do is show make sure the button bars you want are exposed by default.

Flash Header: Not Showing in Safari

Not sure if it is isolated to my machine. While my flash
header works in Camino and Firefox, nothing comes up but the grey
background in Safari. There should be my logo and a set of flash
links. Nothing though. All of a sudden it is doing this. Never had
a problem before. The only thing I did was drop a folder called
"support chat" in my main directory, but that should affect any
other pages at all. All the files are contained in that support
chat folder so they should affect the html files in my main
directory.
http://www.thevettergroup.com

Well i tried a couple of sites and none of them are showing
flash at all!!! On our intranet setup as well the problem persists.
None of the flash objects load in the browser. Tried on IE but no
luck.
Although if you just load a html page directly in browser
without using the web server, the flash shows fine.
If anyone knows what the issue is then please do post a
reply.
Thanks!

Header not showing up in PDF

Similar Messages

Maybe you are looking for