Header Text And Item Text in Sales Order
Dear ALL
First one:
I have two different problems with text in sales order, when i create sales order after giving all the information like customer and material.
If i navigate through the Go To-- > Header ---> Text then there is a dump is any idea what all i need to check?
Error Message
A RAISE statement in the program "SAPLOLEA " raised the exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
The termination occurred in the ABAP/4 program "SAPLOLEA " in
"AC_SYSTEM_FLUSH".
The main program was "SAPMV45A ".
The termination occurred in line 27
of the source code of program "LOLEAU02 " (when calling the editor 270).
Second one:
when i am creating the sales order without enter the quantity , customer and material if i navigate through the Header Text or item Text i can able to go but there in no dump, the moment i enter the quantity for the material then it over writes all the text in item and header.
Any suggestions please?
Thanks & Regards,
Veer
Dear Veer,
Please take the help from the technical people to fix the issue because it may related activation some Z developments which are related to the text.
Check the text determination procedure configuration settings also whether the text is calling from the Customer master and Material master.
If the text is calling from the master data maintain the text in the master data then try.
I hope it will help you
Regards,
Murali.
Similar Messages
-
Dump after creating new header text on sales order and invoice.
Hello,
We have created one header text on sales order and the same text for invoices, on VOTXN customizing.
Testing the new text, system let us save the text fine, but later, if we display the text, system give us dump error.
My question is, after transport the customizing to the next environment, is necessary run a standard program. Since VOTXN, we have generated the new access created, but dump appear displaying text header tab.
Any help on this?
Thanks in advanceHello Customer master table man
1) Did you review the dump analysis- ST22? Do that because the dump amy or may not be related to the Text config changes.
2) You are also mentioning about transporting? Did you already transport and are facing this issue in the target client or is it happening in the source client and you want to avoid it in the target? OSS note 1117467 throws light on transporting issues.
Review the following OSS notes:
548615 - FAQ: Text determination in SD II
548517 - FAQ: Text determination in SD I
1117467 - Text Customizing change not transferred in target system II
970153 - Change to Customizing text not transferred to target system
Hope this helps. -
WHERE CAN I SEE THE PARAMETERS VALUES IN "READ_TEXT " FM
OBJECT
ID
NAME
LANGU
SUPPOSE I WANT TO READ THE HEADER TEXT FOR SALES ORDER. IAM USING 4.7 IDES.hi ,
its easy to find where the the parameters are stored.
Just right click on the parameter and click on Technical information to see the table name..
this is applicable for all.
Siva -
How can we revise the pricing both at header and item level of sales order?
Dear All,
Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.Dear Lakshmipathi,
Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot. -
Difference B/W Delivery plant and item plant in Sales Order
HI,
May i know Difference between Delivery plant and item plant in Sales order and what is the use of those fields.What is the process of raising sales order for different plants.
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:10 AMHI G. Lakshmipathi,
Thnks for the reply.Yes i am comparing (DWERK (at header level) and WERKS (at item level)) these two fields.
Any how we can give only one plant in Customer Master, we are not maintaining Customer/mtrl regard (Not required in our company scenario) and we have extended MMR to different plants.
So as per ur answer u went me to change only WERKS (at item level) while raising sales order for different plants.Is it enough?
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:46 AM -
Transfer of Header text from Sales Order to Delivery
Hi Experts,
I had a requirement to populate Terms of delivery text in Sales Order Header text with some predefined value which I have accomplished using MV45AFZB - User Exit USEREXIT_CHECK_VBAP which transfers the text on save of the document to sales order header (terms of Delivery Text ) .
Now the issue is the same text is required to be copied to delivery - Terms of Delivery header Text. But this is not happening/Its occuring one out of 4 times . I am not able to find out the reason for this.
Please help in this regard.
ThanksThis can be set in conifugration. Transaction VOTXN. The delivery header text can be set to be referenced from the sales order.
-
Order and item status in sales order
We had multiple items in the sales order
for one of the item, the quantity was 5, but user cretaed a delivery of 8. but she only post goods issue for 5.
the delivery and order was open
at this stage the archival of delivery took place.
we changed the status in tables vbuk and vbup to complete.
but in the display of status in sales order, it still shows being processed.
What can we do now to set the order status and item status to COMPLETE.
Thank you for your replyHi,
This order status will not be complete unless the delivered quantity is equal to the order quantity. You have 2 options. 1. Change the order quantity to 8 and delliver the rest 3 and the order status will be set to COMPLETE. 2. Otherwise, reverse the PGI in VL09n and delete the delivery and create the delivery again for 5 qty. This will set the order status as COMPLETE.
Regards,
Raghav -
The header text in sales order are coming on DE (and has to be PT)
Hi SDN Team members,
I have a strange issue. In the sale s order header the text by default it is coming as DE(German language) but it should be PT portugal language. This situation is in production system. The SAP log on language is PT.
I have replicated the same scenario in Relica of Production as well as test system where i am getting by default language is Portugal. Even i have tried to log on in to PT language where i am not getting the above problem where sales order shows the header text as default PT.
I have checked the sold to party - where the language is maintained as PT, Also in Sales organization and in company code level where the language is maintained in PT.
I have checked the OSS Notes also 442976 and Note 451147 and also the report - RVTEXTE..
This problem comes for almost all the sales users of the portugal.
Can you please help me to resolve this problem.
Looking forward for your favorable reply.
Thanks and Regards,
JanaHi SDN team,
I have solved this request. By running the Program - RVTEXTE and inputing the selection parameters as per out business requirement and the problem has been resolved.
Team - Thanks for all your valuable inputs.
Regards,
Jana -
Hi Experts,
I have problem when i am creating the sales order i want to put some text in the Header Data.
But when i navigate through the menu go to--> Header --> Text, the moment i select that it is giving ABAP short Dup with errors "Exception condition "CNTL_ERROR" raised." , do you any one know how to fix this??
It is urgent can any one give a idea?
Regards,
Veer
Edited by: Sundar Ayyagari on Apr 18, 2008 3:27 PMHello Nikhilesh shenoy,
This is the original error i am getting we are using currently 4.6C i have checked all the OSS notes you have mentioned and the code as well it is already implemented. Still i am facing this problem can you suggest any more help on this.
If i navigate through the Go To-- > Header ---> Text then there is a dump is any idea what all i need to check?
Error Message
A RAISE statement in the program "SAPLOLEA " raised the exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
The termination occurred in the ABAP/4 program "SAPLOLEA " in
"AC_SYSTEM_FLUSH".
The main program was "SAPMV45A ".
The termination occurred in line 27
of the source code of program "LOLEAU02 " (when calling the editor 270).
Thanks
Sundar -
Change documents log for Header texts of Sales order
Hi ,
Does any body came across seeing the changes in the texts in the change logs in the sales order ?
Can anyone of you provide me the way to activate the change logs for the long texts
Regards,
Ajai.Kapil,
Before my current project I was with the same opinion. But at my current client I saw the header texts being logged for the purchase order. I.e if we change the header texts for the PO, we can see the changes in the change log history of the PO. Thats where I got trouble into. The business shows the PO history and expecting the same in SO too. I was unable to figure out how the PO header texts changes were being logged.
Coming to performance, the clients volume of orders is not too high.
Lets see any of our SDN friends come up with some hints..
Regards,
Ajai. -
Idoc problem: I canu00B4t modify Header text before sales order is created
We are generating Sales order with Idoc :ORDERS01 (Inbound), and we´d like modify some text in E1EDKT1 AND E1EDKT2 segments, at header level.
We are using EXIT_SAPLVEDA_011 with this coding:
data: v_e1edkt1 like e1edkt1,
v_e1edkt2 like e1edkt2,
v_index like sy-tabix.
segment E1EDKT1----
read table dedidd with key segnam = 'E1EDKT1'.
if sy-subrc eq 0.
v_index = sy-tabix.
v_e1edkt1 = dedidd-sdata.
v_e1edkt1-tdid = '001'.
v_e1edkt1-tsspras = 'EN'.
v_e1edkt1-tsspras_iso = 'E'.
v_e1edkt1-tdobject = 'VBBK'.
dedidd-sdata = v_e1edkt1.
modify dedidd index v_index.
segment:E1EDKT2----
read table dedidd with key segnam = 'E1EDKT2'.
if sy-subrc eq 0.
v_index = sy-tabix.
v_e1edkt2 = dedidd-sdata.
v_e1edkt2-tdline = 'FIXED TEXT BLA BLA BLA '.
v_e1edkt2-tdformat = '*'.
dedidd-sdata = v_e1edkt2.
modify dedidd index v_index.
endif.
endif.
but Nothing .. I'm not able to modify the text when the Sales ordes is created.
Are we modifying the right structure ?? or do we need to flagear some variable ??
any suggestion ???Ok!. I moved the coding to EXIT_SAPLVEDA_001:
if segment-segnam = 'E1EDKT1'.
V_puntero = sy-tabix.
V_E1EDKT1 = segment-sdata.
V_E1EDKT1-TDID ='003'.
V_E1EDKT1-TSSPRAS ='EN'.
V_E1EDKT1-TSSPRAS_ISO ='E'.
V_E1EDKT1-TDOBJECT ='VBBK'.
segment-sdata = V_E1EDKT1.
endif.
if segment-segnam = 'E1EDKT2'.
V_puntero = sy-tabix.
V_E1EDKT2 = segment-sdata.
V_E1EDKT2-TDLINE ='FIXED TEXT BLA BLA BLA..'.
V_E1EDKT2-TDFORMAT ='*'.
segment-sdata = V_E1EDKT2.
endif.
It´s not working .! .
I have a suspect with TDID ='003', if I check the Sap table: STXH-TDID , that ID is char 4. -
Hi,
I am creating a sales order from third party systme and do saom validation in EXIT - MV45AFZZ(the exit called before saving Sales Order). Based on my validation I am appending the header text incase if it is available already else I key in some text incase if we don't have a text.
Since we don't have the OBJECT NAME (Sales order number) at this point I am not able to do this. Can you please help me to resolve this.
Thanks in Advance... <<Text removed>>
Regards
Mohan
Edited by: Matt on Apr 9, 2009 9:58 AM - Do not offer pointsWrite the same logic 'after sales order number has been generated', it will be done in USEREXIT_SAVE_DOCUMENT user exit.
-
Pull header text from sales order
Hi all im trying to get the External header text entered on the SALES ORDER to print out on the INVOICE and the PACKING LIST
I have started out with using the READ_TEXT FM, but I am not sure how to pull the text from a different document.
any ideas?
thanksHi,
You can find more in the thread;
FM READ_TEXT
Thanks -
Header Text from Sales Order Not Copied to Header Text Invoice.
Hello All....Does anybody have an idea why this is happening ??
My Sales Order have the Header Cl.Text Z001 "Header Text", I write text in two languaje "EN" and "ES".
Z001 Header Text (Sales Order)
EN -->> Hello
ES -->> Hola
When I create the Invoice with reference this Sales Order, this only copy the Spanish Text but not the English Text.
Z001 Header Text (Invoice)
ES -->> Hola
Thanks in advanced.
JEOS.Hello Jorge
Ensure that you checked the box 'All Languages' in the related access sequence.
T code VOTXN. -
Create the Header Text In Sales Order Header
Hi All,
I want to create a new header text in the sales order header level, Would you mind give me some manual to create this ?
Regards,
LukeHi Luke,
Please goto T-code VOTXN->Sales Document->Header->Text object VBBK
You could create Text ID and access sequence.
Assign the access sequence to text ID.
Assign the text ID to the procedure.
Assign the procedure to sales order type.
Please also refer the following online documentation:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f993545a11d1a7020000e829fd11/frameset.htm
Hope it helps.
Regards,
Smile
Edited by: Smile Zhang on Jul 3, 2008 7:22 AM -
Header text in sales order level
Dear Experts,
Kindly advise me how to control sales order header level text as not modifiable in T.Code:VA02.
this is not for all text ids only 2 text ids out of 15.
ThxHello Colleague;
All of configuration related with text you can find in t-code VOTXN. There you can choose for each ID if the text is obligatory and if it will displayed when transferring, but you can't set "non-modificable" during VA02 or something like this.
In order to execute the rule that you want to apply I advise you do add a "Z" routine or user-exit to attend it.
I hoe it can clarify the question.
Regards
Ruy Castro
Maybe you are looking for
-
2.Monitor an Dockingstation bleibt schwarz (T540p)
Hallo, wir haben einige T540p-Notebooks in Benutzung mit Dockingstations. Auf einem Arbeitsplatz musste ich die Dockingstation austauschen. Nur bekomme ich den 2. Monitor jetzt nicht mehr zum laufen. Dieser lief vorher über DVI, über DP oder VGA funk
-
Trouble with SF 300-24P 24-Port 10/100 PoE
Good day. I connect to switch Access Point, configure port on switch which vlan work on this port. But after reboot AP my config for this port delete and have other config where vlan 1 untagged, and allow all other vlan. But in my cinfig allow 3vlan:
-
Which is better for masking hair? Raw or Jpg ?
Hi, I know that when it comes to color grading it's much better to work on a raw file. Does it make a big difference also for masking out hair ? Thanks!
-
Original apple id was changed because of change in email address
How do I recover books from ibooks under the original apple id
-
In 3WP, Error: item 75 / 0000000010 currently locked by a foreign user.
In 3 way Pegging, error " item 75 / 0000000010 currently locked by a foreign user" is coming frequently. What does this error means? How to fix it?