Header text to be copied from the sales order to delivery

Hi Gurus,
I have a requirement in which  header text "Customer order text " needs to be copied from the sales order to the delivery.After copying the text we need to print on the packing slip.
Can anyone advise me as how to copy the text from the sales order header to delivery  and then print on the packing slip.
Thanks ,
Smitha.

Maintain the Text ID @ Sales Documnet Header level and add it to your Text Procedure. Also ensure you assign the access sequence to your Text ID in your procedure.
Access Seuquence should have VBBK and the text ID number and check All Languages and use Requirement 1.
Then in the Delivery Header Text Procudure add this text ID and assign the same access sequence as above.
This will copy the Text ID from Sales Order to Delivery Order Header.
You can configure the output for packing slipduring the delivery process  and in the output program read this Text ID and print it.
Note" Copy Controls do not copy text from preceeding documents to succeeding documents. Only the Access Sequences used in the Text Procedure will do that with the help of the reuqirement assigned in the same.
Thanks and Hope this helps.
Sai

Similar Messages

  • Header text to get copied from order to Invoice

    Hi,
    we are creating an Invoice(through transaction VF01) giving the delivery document number and document type (Invoice F2).
    we are maintaining Header text in Order through which the above mentioned delivery document number is created and this header text should get copied in the Invoice.
    For this, I went into Transaction VOTXN, from there selected billing header, from here kept a break point for the routine BEDINGUNG_PRUEFEN_001 through which the text will get copied.
    Now, when I'm creating the Invoice this routine is getting executed, but still the text is not getting copied.
    Any pointers on this would be of great help.
    Thanks and Regards,
    Vamsee Priya.

    Maintain the Text ID @ Sales Documnet Header level and add it to your Text Procedure. Also ensure you assign the access sequence to your Text ID in your procedure.
    Access Seuquence should have VBBK and the text ID number and check All Languages and use Requirement 1.
    Then in the Delivery Header Text Procudure add this text ID and assign the same access sequence as above.
    This will copy the Text ID from Sales Order to Delivery Order Header.
    You can configure the output for packing slipduring the delivery process  and in the output program read this Text ID and print it.
    Note" Copy Controls do not copy text from preceeding documents to succeeding documents. Only the Access Sequences used in the Text Procedure will do that with the help of the reuqirement assigned in the same.
    Thanks and Hope this helps.
    Sai

  • How to delete a line item from the sales order

    Hi all,
    how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
    Regards
    Kumar

    Hi
    U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
    This is called short close ( as the qty is not delivered fully).
    Thx.

  • Subcontract PO from the sales order..!

    Hi SD Gurus,
    Can i create subcontract purhcase req from the sales order.
    My requirement is when i create the sales order my item/sheduline category should create a subcontract po to my sister concern company.
    Is't possible ? Kinldy help to advice & let me know what are the config setup i need to setup.
    Thanks.

    Hello,
    The PO number field you see in VA03 is usually an input which need not be an actual PO number existing in the current system.So you can have a PO number like 'test123'.The system will accept it and store it as is in the table VBAK.
    However if you create a sales order with reference to a PO number then the PO number obviously does exist in the system and can be accessed via transaction ME23n and can also be found in tables EKKO,EKPO.
    So to sum up the number you enter in the PO field may or may not be an actual PO number existing in the SAP system.it can be used as a reference for later checks a customer may do when he calls to find out the status of his sales order.
    Hope this explanation helps you.
    Regards,
    Neil.

  • No condition update from the sales orders exist - VK322 Message

    Hello All,
    I have activated " Condition Index" & " Condition Update" flag for one of my discount condition type and then created it's condition record along with scales on three levels. The condition type which I mentioned above is set as " Value Scale" in Scale Basis for checking the document value and apply the applicable discount percentage.
    I have created three sales orders wherein the discount percentage is getting applied as per my condition record ( so, the document value is getting accumulated and compared with the condition record correctly )  but when I try to check the cumulative values ( ctrl +shift + F4 ) from the condition record, I get information message " VK322" mentioned in the subject.
    VK322 -
    No condition update from the sales orders exist
    Message no. VK322
    Diagnosis
    The following causes are possible:
    1. There are no sales orders for the condition record that you selected.
    2. Updating condition records in the sales order entry is not active.
    Procedure
    Concerning 1:
    Check the sales orders created for the condition record that you selected.
    Concerning 2:
    Activate the updating for condition records in the sales order entry.
    I have checked everything in SPRO for this but could not find anything which can give me a clue to resolve this problem, especially " Concerning 2" part of this message.
    My requirement > To be able to see the cumulative values from condition record.
    Also, in which table the accumulated values get stored?
    Appreciate your expert advise on this issue.
    Regards,
    Hrishi
    Edited by: Hrishikesh Bhalwankar on Sep 13, 2011 1:59 AM

    Hello Everyone,
    I would like to thank each one of you for giving valuable inputs in regard to my requirement and I would like to let you know that I am able to achieve the results as per the expectation.
    I would also like to share some key things which I did ( with the help of all your expert inputs ) due to which the requirement is met:-
    1. Activation of ' Condition Index, Condition Update' in V/06 for the discount condition type.
    2. Maintained ' B - Value Scale' in Scale Basis for the said condition type in V/06 - my requirement was to check against a value to apply the necessary scale base percentage.
    3. Activation of ' S071' info structure via OM01
    4. Condition record maintenance as per the required scales.
    4. Written a new routine to check the accumulated condition base value from S071 along with the current document condition base value.
    5. Put this routine in ' Scale Formula' in V/06.
    This is giving me the perfect results for the correct application of the discount.
    Just last question - How to re-organize the S071 info structure as I tried to re-organize it with Standard Program ' RV15F001' but it is not re-organizing this info structure... Any idea on this?
    Thanks a lot friends for all your advice...
    Regards,
    Hrishi
    Edited by: Hrishikesh Bhalwankar on Oct 11, 2011 2:11 AM

  • Custom duty should be copied into the Sales order based on material

    Hi,
    Requirement is only Custom duty  Tax condition types to copied into the sales order based on material (for e.g A) .Suppose customer X is buying material Y then different tax condition types is to be applied but if the same customer  is buying material A then only Custom duty will be copied.
    But we can set in the customer Master whether the maerial is taxable or not.So where to do the right tax classification settings so that sysyem will automatically fetch the right  tax condition types if i enter one  material which is applicable for Custom Duty only
    We are using TAXINJ.
    Regards
    Jyoti

    Dear Jyoti
    As per your post, the material code is different for the same customer and hence you can differentiate the tax classification in material master.  That is for material X, if you maintain Tax classification 1 in Sales Org1 view, maintain 2 for the material Y.
    Now maintain different tax code for these tax classifications in VK11 / UTXJ.
    thanks
    G. Lakshmipathi

  • How to create planned order from the sales order for a processing item

    In the MTO sceanrio, assembly order is created directly from the sales order. I would like to create a planned order from the sales order.
    I tried the Planning strategy group 81 in the material master but it didnt work.
    Could you please let me know how to do it? Is it Schedule line config that controls whether planned order is created?
    Thanks
    Harish

    Narayana,
    Planning strategy 82 is the best & standard way of getting production order created on sale order create.
    just assign this strategy  in MRP 3 view under strategy group.
    If not then using sale order reqt type ( KMFA- Assembly with production order) & assigning this to your sale order item category is also another way to create prodcution order without using planning strategy in material master.
    Follow steps in SPRO-->Sales & dist --> basic functions >avail check &transfer of requirements> transfer reqts-->determination of reqt type using transaction
    Here you may select the item category you in sale orders & assign KMFA to your item category. this will then give option in sale order create to change reqt type to KFMA for assebly orders.
    If you need KFMA to be default assign it to Item cat/ MRP type ( PD) combo.
    Regards
    Ritesh

  • How to prevent Copy from Cancelled Sales Orders.

    Hi,
    I have a requirement as below.
    I want to stop users from Copying a Cancelled Sales Order Lines.
    Can anybody please let me know how I can achieve this.
    I tried using the processing constraints but couldn't succeed.
    Thanks in advance.
    Thanks
    Shekhar

    Hi,
    Also you can refer the following security rule feature which oracle provides to set your rule from users performing actions like copying, deleting and cancelling.
    http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/oe/esecruls.htm#r_secrul
    Thanks
    Nancy

  • Dly Qty is Diff from the Sale order Qty

    Hi,
    Gurus
    The sale order quantity for the Material X is 100 Qty, Material Y is 99.601 Qty, Material Z is 99.601.
    While we see the same in delivery level the quantity is coming as 99.730 for Mtl X, 99.330 for Mtl Y and 99.330 for Mtl Z. Even the the quantity is confirmed for the Exact Qty in the Shedule Line in sale order.
    Guide Me Gurus
    Regards
    Anand

    Hi,
    Thank You All, Thank you all for the Coordination.
    I have checked the same for what you have all told. I identified the Material in the sales order, the item category for this material as BOM.
    I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
    Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
    My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
    My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
    Note:-  The material X  is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
    The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
    Guide me GURUS.
    Thanks and Regards,
    ANAND

  • How to retrieve invoice details from the sales order .. urgent..

    hi,
    i am retrieving  vbak-vbeln with this i should retreive invoice details
    how to relate vbak with abrk table
    i have vbak -vbeln,erdat,VBAK- VKORG,VBAK-KUNNR,VBAK-VTWEG,VBAK- SPART.
    its urgent..

    Hi
    U can see the sales order number in VBRP table, fields:
    VBRP-AUBEL and VBRP-AUPOS.
    But if u have the sales order number it's better to use VBFA table.
    SELECT * FROM VBFA WHERE VBELV = VBAK-VBELN
                         AND VBTYP_N = 'M'
      SELECT SINGLE * VBRK WHERE VBELN = VBFA-VBELN.
      IF SY-SUBRC = 0.
        WRITE: 'Bill number:', VBRK-VBELN.
      ENDIF.
    ENDSELECT.
    U have to make sure to use the right document type:
    M = Invoice
    N = Invoice cancellation
    So the bill type depends on the sales order type
    Max

  • Oracle std report to fetch all the backordered lines from the sales orders

    Hello Experts,
    Is there any standard Oracle report which can provide us the details of all the backordered lines in all the sales orders? Pls advise.
    Regards,
    Vidhi

    There is a report called "Backorder Detail Report" under Shipping Execution.

  • Sales Order - Returns change the sales order item delivery status

    Hi All,
    we have the following requirement from our users:
    after creating a return, the original sales order should have the
    delivery item status changed.The system should permit that a new
    delivery can be created for sales order item already delivered / billed (a new delivery with the quantity that has being returned) but has a return document,
    without increasing the sales order quantity.
    Does any body got the same requirement ?
    Thanks in advance,
    Marcus

    Hi Marcus,
      After creating return order you have to do the goods receipts.But this doesn't mean that you will be able to create a delivery with the old order itself.
      You have to create the order again and ahve to create a new delivery,goods issue and billing.
      Another option is as Roberto said that you have to reverse the goods issue thru VL09 and then cancel(delete) your delivery and then you can create a new delivery wr.t to your original sales order.
      Reward points if it helps.
    Regards
    Karan

  • Repetitive milestone copying in the sales order from Projects

    Hi friends,
    A particular WBS element with, say 5 milestones with the invoice percentages adding up to 100%, can be assigned to multiple line items in a sales order. Hence the milestones can be copied to each line item. I want to stop this repetitive copying of same milestones. Since each milestone has a particular number attached to it, I want to stop this multiple copying with the help of this milestone number. Is there any user exit for this? Please let me know.
    bye
    Pratap.V

    Hi Pratap,
    I couldn't find the exact user exit for your query but the below link shows some of the user exits related to milestone billing methods, may it help you .
    http://help.sap.com/saphelp_45B/helpdata/en/22/f62c7dd435d1118b3f0060b03ca329/content.htm
    Thanks,
    Dhruv

  • Link from the Sales order/Sheduling Agreement to planned order

    Hi,
    SAP SD Gurus,
    Can you please tell me the the link from sales order/sheduling agreement to planned order.
    Thanks,
    Anand

    . I would like to know why only for this character the values is not displayed.
    Dear,
    Please check the relevant characteristic in CT04
    select the addnl data tab
    You can find the table name and field name
    and also you can find the check mark in   not ready for Input in procedure of value assignment

  • How to create an Installed base from the sales order

    Dear Friends,
    could any one let me know the process of creating an Installed base with the below process.
    Once a sales order is created in SD, an istalled base need to be created in CRM system with reference to sales order.
    There are around 50 final products and approximately 2000(BOM)components for each product exists. but the client wants to maintain only few components
    like 100 to 200 components in Installed base.
    In CRM system, can we maintain Installed base Template with that 100 or 200 components. If yes, how do we assign the Individual objects(Serial numbers) to each component.
    Regards,
    Ven

    Hi Ajay
    there can be two possibilities
    Option 1. Create Install base in CRM while creating Sales order in ECC using RFC CRM_IBASE_CREATE. Make some reference  of sales order in the Ibase. later when you move equipments to CRM then you can attach these equipments to Ibase (Already created in Thru RFC)in Badi CRM_EQUI_LOAD(This BAdi is called while moving equipments from ECC to CRM).
    Option 2. Don't create Ibase at the creation of Sales order. but while creating Equipment just add some indiacator in the equipment to know which sale sorder this equipments belongs.
    and once these equipments moves to CRM. Using the BADI CRM_EQUI_LOAD you can club all the equipments(of same sales order) under one ibase.
    Regards
    Naresh

Maybe you are looking for