Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Hi Experts,
We are upgrading SRM 3.0 to SRM 7.0 .In the upgraded sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs the Header text field is populated correctly.
Inputs on this will be very helpful.
Regards,
Ravi.K

Ravi,
Check in IMG if the text schema is used in configuring PO transaction type. Define Transaction Types is the setting.
SG

Similar Messages

Session Timeout Alert text is not getting displayed on web ui.

Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.

Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Object form is not getting displayed for few users

Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.

Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari

Sold-to-party Text data not getting displayed; Urgent

I am current using a BI content 0CRM_COMP which contains sold-to-party, i have loaded this ODS, but when i view the data in bex i could only see the Key value and not the Text, even though i change the display mode to Key and Text both the columns displays only the Key value. is it because the master data is not loaded, i have also tried to load the Business Partner master data attributes and text till no use. Please help
Note: These business partners are created in CRM and are nor from R/3

Hi,
Just check whether for this infoobject has master data and text option ticked or not in infoobject.
If text option in there then search for the data scource0CRM_SOLDTO_TEXT or something like that which contain text for this particular infoobject and then laod the text for the same.
Just got to the modelling tab -> infoprovider-> Application component in which you infoobject is present-> right click insert object as dat target-> give the name of your object this will give you data target one for master data one for text->activate data source and replicate in BW if not presen in BW-> make infosource on the text data source->make update rules for the text target and load.
Or as Anil said sold to party is reference to customer load text into the custome with the same method iot will work fine.
Hope it helps
Thanks

Quantity field not getting displayed for all document types

Hi,
I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
WI- Inventory document
WA-Goods Issue
WE---Not showing quantity against (WE- Goods Receipt)
Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
Thanks
Aravind

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Master data: Text is not getting displayed

Hi Experts,
There is one Infoobject 0EMPLOYEE..It is the master data.I am loading the attributes and texts for the same..I am loading this object thru Direct Update.When I go in the Maintain Masterdata...there I am not able to see the text..I have selected Medium Description..But text is there in the T table..
Please help me out as what can be the problem..
Thanks,
Shalaka.

Hi Shalaka,
You need to activate that particular master firstly, inorder to make the changes reflect in the maintain master data.
and as you are saying the text text is visible in Report,so it might
be a problem of refreshing as well.
Regards,
Umesh.

Adobe form output not getting displayed for the whole length of the page

Hi All,
I have developed an adobe form using webdynpro application. While testing, the output(pdf) does not occupy the entire page/screen from end-user side. But when I test the same from my side, the output appears fine . Could anyone suggest me on this?
Regards,
Allwin.

Did you check the resolution at end user side? Is it different from your resolution?
To overcome this check what is the height and width you have specified for InteractiveFormUI element in your Web Dynpro application. Have you specified in pixels like 300px? You need to enter it as 100% for both.
Chintan

Selection tet -description not getting displayed

Hi,
In abap program, the text for the selection text is not getting displayed. For ex. for field p_matnr which is nothing but mara-matnr, the text name Material number is not getting displayed and instead it shows p_matnr on the selection screen. I have activated the dictionary check box on the selection texts still it is not working. The strange part is the same Selection text 'P_MATNR' displays the text correctly in another report but on this report even if i uncheck and check the dictionary check box it does not display. Has soneone faced this before?
Thanks,
Prem

Hi.,
Try this.,
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c1 .
PARAMETERS : P_MATNR LIKE MARA-MATNR.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK 1.
INITIALIZATION.
c1 = 'Material Number:'.
hope this helps u.,
Thanks & Regards,
Kiran

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Barcodes are not getting Displayed in Smartforms.

HI
In Previous Month barcode was getting displayed in smartforms print Preview. And PDF form is generated successfully. I am not using standard form this is custom.
In Previous month, Service pack SAPKA70023 ABA Support Package 23 & 22 for 7.00 were applied, After that Barcode is not getting displayed for current month. I identified that Barcode Name is not mentioned in smartstyles.
Ther is no transport Request Moved from last one year.
Can any one suggest me there will be any impact on barcodes after service packs
Thanks
Ravi

Hello,
have created some new users and done with the leave request, it comes to backend inbox, but not
visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
You can see what data source your portal is using by going to
Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
Here you can check if your user is contained in the data source:
Portal --> User Administration --> choose the right data source --> put in the username --> search
Please check if your users are correctly created.
Regards,
Iris

Adobe Form NOT getting displayed in WebDynpro Modal Window (Pop Up)

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
It seems to be available only for ABAP version. I cant find it in the java version.. check this..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/656442a1c4de54e10000000a155106/frameset.htm">Help SAP Link for Java Reference</a>
And even in ABAP , the pre-requisite seems to be installation of ACF,
The exact words
<i>
Adobe Reader (>= 7.0) and, if you are creating interactive forms, also the ActiveX Control Framework (ACF) installed on your computer. Also see SAP note 834573.</i>

Adobe Form not getting displayed in WebDynpro Modal Window

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
even though this is quite an old post, it still could be worth for someone to have a look at Note 1342716.
Michal

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Text not getting displayed in PA40 action.

Hello All,
We upgraded from 4.6 to 5.0. When I doing the hiring or any other action, the text for the action type, reason for action or any other field is not getting displayed. Even when I select the entries the text for that is not getting displayed.
like its displaying only 01- for Action type hiring.
Thank You all in advance for your reponse!
Chakri.

Hello Sharath,
I checked this and this table is having all the values properly maintained. Language, Action, Name of the action is maintained. Is there any place where we need to activate this in order for us to see the name of the action type also when we select an action in PA40.
Thanks a lot for your response.
Chakri.

Header Vendor text is not getting displayed for PO in BBP_PD transaction.

Similar Messages

Maybe you are looking for