Heading changing font

Can somebody tell me why when I used VAT as a heading it appeared differently in the column heading.? It then happened in the adjacent column and then back to normal in the next.
However I had been moving things about! Any Ideas?
Thanks!

At this point you should be asking the creator why these things are happening since neither of us know what he did to produce these effects. You can poke around and find out for yourself if you have the patience, but without even being able to see your document, we'll only be taking wild guesses from out here. To find out for yourself what may be going on, open a bunch of Inspector windows, open the Conditional Format Rules window, keep an eye on the Format Bar (directly above the Formula Bar) and Arrow-key your way around the document looking for oddities.
Here's an example where I "found" a conditional format rule causing red text:
We'll be glad to help if you can provide some data.
Jerry

Similar Messages

Get the header in centre,make bold, change font in hierarchical alv list

Hi all
I need to get the following header in the centre for hierarchical alv list:
ex:
                                                                          General Ledger                       -
want it to be bold
                                                                           July 2009                                -
want to change font to be less than 1st line
Please help me to achieve this.
I have got the header in the middle using write statements in top of page.
But am not able to get it bold and change the font.
Thanking in advance.

Hi all
I need to get the following header in the centre for hierarchical alv list:
ex:
                                                                General Ledger   ( want it to be bold)
                                                                 July 2009            (want to change font to be less than 1st line )
Please help me to achieve this.
I have got the header in the middle using write statements in top of page.
But am not able to get it bold and change the font.
Thanking in advance.

How to change font size of OATableBean Column Headers

Dear All,
I am facing a problem, senario is i am having a table layout with about 20 columns and each column header is about 30 characters long now the problem is when the table is rendered because of header font size its layout is not good looking ... is there any way that i can controll the font size of colmun headers.
I have tried this solution provided in this forum:
CSSStyle csNum = new CSSStyle();
csNum.setProperty("font-size", "8");
OAPageLayoutBean plb = pageContext.getPageLayoutBean();
OAMessageStyledTextBean columnBean = (OAMessageStyledTextBean) plb.findChildRecursive("Description");
columnBean.setInlineStyle(csNum);
but it only change font size of column data not the header.
Thanks in advance.

Hi,
// Get a handle to the column's header
OAColumnBean columnBean =
(OAColumnBean)tableBean.findIndexedChildRecursive("<columnBeanId>");
OASortableHeaderBean colHeaderBean =
(OASortableHeaderBean)columnBean.getColumnHeader();
colHeaderBean.setText("<newText>");Regards,
Gyan

Change Font size of Query Title in PDF Output

Hi Experts
I want to change font size of Query title when its exported to PDF format .
I change the text properites to Header size 1 , but still its not reflected in Output in PDF .
Any suggestions,
Regards,
Jawad

Hello Jawad,
Please tell me the solution for this.

In Report How to change font in big font.

hi, Guru......
I have a problem...
"how will change font on report".
that means print heading big font.
Pls Reply....

if it is ALV report....
then use....
*&      Form top
*       text
FORM top.
DATA: t_header TYPE slis_t_listheader,
       wa_header TYPE slis_listheader,
       t_line LIKE wa_header-info,
       ld_lines TYPE i,
       ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
wa_header-info = '<text1>'.
APPEND wa_header TO t_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-info = '<text2>'.
APPEND wa_header TO t_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-info = '<text3>'.
APPEND wa_header TO t_header.
CLEAR wa_header.
IF s_pst-low IS NOT INITIAL.
    wa_header-typ = 'S'.
    wa_header-key = 'From:'.
    wa_header-info = s_pst-low.
    APPEND wa_header TO t_header.
    CLEAR wa_header.
ENDIF.
IF s_pst-high IS NOT INITIAL.
    wa_header-typ = 'S'.
    wa_header-key = 'To:'.
    wa_header-info = s_pst-high.
    APPEND wa_header TO t_header.
    CLEAR wa_header.
ENDIF.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = t_header
*     I_LOGO                   = 'PMMN_BACKGROUND'
*     I_END_OF_LIST_GRID       =
*     I_ALV_FORM               =
ENDFORM.                    "top
and in
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     i_callback_top_of_page            = 'TOP'
Arunima

Can I change Fonts with Dragon Dictate

Can I Change Fonts, Call out e-mail and search Commands with Dragon Dictate ?
Also Can I use it without a Head Phone because my Speakers etc. plug in that portion
behind the screen.

Speech recognition expert Dan Newman of Sayican.com has a training video for Dragon Dictate. There is a free lesson that you can download.

My typewriter toolbar is graying out the ability to change font size, type, and color.

My typewriter toolbar is graying out the ability to change font size, type, and color.

Here's what I have done in the past. Maybe not elegant, but
it works. (I
use PHP, but I'm sure you can modify for ASP.)
In the HEAD of each web page, include regular old embedded
STYLE tags,
but INCLUDE an external PHP file:
<head>
<style type="text/css">
<?php include('styles/testcss.php'); ?>
</style>
</head>
Now in that included PHP file, just have CSS code which pulls
in your
dynamic data. Here's an example snippet:
body {
color: #600;
background-color: <?php echo
$row_recordset['bgcolor'];?>
Of course, you'll need the code for the recordset somewhere
too.
Alec
Adobe Community Expert

Changing font in classical report

hi,
can we change the font of the output in a write statment?how?
thx & regards,
balaji.s

Not possible in classical report
check this option....
Be aware that the PRINT-CONTROL is not supported in SAP Enterprise 4.7
For your information, SAP cannot provide any support to error caused by print control command (see SAP OSS notes 66478). * Parameters for function below should be taken from your printer
configuration in SAP - check SPAD transaction -
standard print control
print-control position 1 function: 'CI006', 'SF015'.
Submitted by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.*--- End of Program
Regards
Vasu

Auto Page Number Change Font or Delete?

After translation from Word to Pages, the auto page number font causes the third digit of the page number to appear outside margin of header. How can I change font or delete and put in new page number?

Usually the page numbering from Word are have objects that are not selectable. That is until you have made them selectable by going Arrange > Make background object selectable. You might need to go Format > Advanced > Make Master object selectable too.
Delete them and use Pages version instead, Insert > Page Number

Verizon Webmail Editing fails in IE9 - Cannot change Font or Character Size

I recently switched from IE8 to IE9, and now in Rich Text I cannot highlight and change Font family of Font Size.
The highlight disappears when I click one of the Font dropdowns, and the cursor jumps to the head of the message.
I can select a Font size and/or family, then position the cursor, then enter text, and it is the correct size and family,
but I cannot after that change it. If I paste something into the message, I cannot change that.
This fails on two computers running WIN8-64bit and IE9.
It does not fail in Firefox.
Verizon says it is Microsoft's problem. I think Verizon's webmail client provider needs to talk to MIcrosoft.
Does anyone have this configuration with this problem?
Does anyone have this configuration without this problem, and if so, any idea what to change?
Has anyone a solution to offer (except returning to IE8 where it worked)?

Thanks for the quick reply, I tried disabling hardware acceleration but the moment I unchecked it everything started appearing a bit fuzzy. Not as crisp as it normally should. (unless the real effect happens after restarting FF)
Regardless I still don't see how my graphics driver would be the issue, because isn't IE9 technically using it as well? And it showed those special characters just fine other than making em appear a bit smaller.
Also I forgot to mention this, but atm its only happening when I'm viewing that particular page with FF. If I view another different site (like a forum) that has the same or at least similar sets of those special characters, they are showing up fine. If I copy/paste those texts from IE9 onto FF then again they would show up fine.
There's also some forum posts I did which involved me copy/pasting those special characters from that page (before updating to FF12), now when I look at those posts they haven't changed at all as that page has.
So the problem here is not being able to view those characters completely but rather why they would appear different especially on that page unlike when viewed from different sources/browsers.

Nokia Lumina 800 Change Font Size ?

I just got a new Nokia Lumina 800, and the text font is so small I cant read most it.
(I've some replies where nokia are claiming itsa 'visually impaired' problem. Nokia take note.... I had an eye test recently and have 20/20 vision).
Googling I cant believe there is no facility to change font size. YOU CANT CHANGE THE TEXT FONT SIZE ??? Was the device only useability tested on teenagers ?
Nokia: so my question is specifically WHEN will there be an update to correct this ? Or do i return the device and switch to android ?
I'd priortise this a an URGENT issue.

@ kevgallacher
You are very lucky to not have an issue with the font size, some of us don’t have perfect vision and it would make life a lot easier to be able to choose a font size and colour that best suits our own visual ability. If you open a contact up and have a look at the headings which are in white against the black background (if you have dark set for back ground) then under that is the details that you enter, they are almost half the size of the heading font and are the same colour as the selected theme so I have chosen the lime green theme as this helps to make them clearer for me. Don’t know if you have heard but some people do suffer from colour blindness so some colour combination mean that they wont see some colours at all. So please this is an issue for me and some other users, I happy to hear your vision is excellent and its not a problem for you but it may not be like that for ever so this might become an issue for yourself one day. Please Nokia have a look at this and update it to either allow us to customize the font or allow pinch to zoom.

How do I change font and colors back to default?

I have changed the font and color of the text through the tools button and the options button and the content tab. I find nothing telling me how to change the font and colors back to default font and colors. Can you advise me? I'm using Windows 7 Home Premium OS. Thanks.

Hi Brenda19605,
You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a&s=font&r=0&as=s
The default settings for the font are in this article:
https://support.mozilla.org/en-US/kb/Some%20text%20shows%20up%20bold%20after%20upgrade
Unfortunately for the default colors has no good reference. But for text it is black (most lower left) color, background is white (most upper left color). Unvisited links is blue (column 8, row 5) and visited link is purple (column 9, row 5).
Let me know if you need anymore help!
Lordfreak

Email will not let me change fonts all of a sudden.

Email will not let me change fonts all of a sudden. It says I don't have the neccesay permissions in ~/library/preferences. this has just happened recently.

Who is your email provider?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If yes, try deleting the mail account and adding it again.

How to change font/ font color etc in a graphic object using JCombobox?

Hello
My program im writing recently is a small tiny application which can change fonts, font sizes, font colors and background color of the graphics object containing some strings. Im planning to use Jcomboboxes for all those 4 ideas in implementing those functions. Somehow it doesnt work! Any help would be grateful.
So currently what ive done so far is that: Im using two classes to implement the whole program. One class is the main class which contains the GUI with its components (Jcomboboxes etc..) and the other class is a class extending JPanel which does all the drawing. Therefore it contains a graphics object in that class which draws the string. However what i want it to do is using jcombobox which should contain alit of all fonts available/ font sizes/ colors etc. When i scroll through the lists and click the one item i want - the graphics object properties (font sizes/ color etc) should change as a result.
What ive gt so far is implemented the jcomboboxes in place. Problem is i cant get the font to change once selecting an item form it.
Another problem is that to set the color of font - i need to use it with a graphics object in the paintcomponent method. In this case i dnt want to create several diff paint.. method with different property settings (font/ size/ color)
Below is my code; perhaps you'll understand more looking at code.
public class main...
Color[] Colors = {Color.BLUE, Color.RED, Color.GREEN};
        ColorList = new JComboBox(Colors);
ColorList.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent ev) {
                 JComboBox cb = (JComboBox)ev.getSource();
                Color colorType = (Color)cb.getSelectedItem();
                drawingBoard.setBackground(colorType);
          });;1) providing the GUI is correctly implemented with components
2) Combobox stores the colors in an array
3) ActionListener should do following job: (but cant get it right - that is where my problem is)
- once selected the item (color/ font size etc... as i would have similar methods for each) i want, it should pass the item into the drawingboard class (JPanel) and then this class should do the job.
public class DrawingBoard extends JPanel {
       private String message;
       public DrawingBoard() {
              setBackground(Color.white);
              Font font = new Font("Serif", Font.PLAIN, fontSize);
              setFont(font);
              message = "";
       public void setMessage(String m) {
            message = m;
            repaint();
       public void paintComponent(Graphics g) {
              super.paintComponent(g);
              //setBackground(Color.RED);
              Graphics2D g2 = (Graphics2D) g;
              g2.setRenderingHint
              g2.drawString(message, 50, 50);
       public void settingFont(String font) {
            //not sure how to implement this?                          //Jcombobox should pass an item to this
                               //it should match against all known fonts in system then set that font to the graphics
      private void settingFontSize(Graphics g, int f) {
                     //same probelm with above..
      public void setBackgroundColor(Color c) {
           setBackground(c);
           repaint(); // still not sure if this done corretly.
      public void setFontColor(Color c) {
                //not sure how to do this part aswell.
               //i know a method " g.setColor(c)" exist but i need to use a graphics object - and to do that i need to pass it in (then it will cause some confusion in the main class (previous code)
       My problems have been highlighted in the comments of code above.
Any help will be much appreciated thanks!!!

It is the completely correct code
I hope that's what you need
Just put DrawingBoard into JFrame and run
Good luck!
public class DrawingBoard extends JPanel implements ActionListener{
     private String message = "message";
     private Font font = new Font("Serif", Font.PLAIN, 10);
     private Color color = Color.RED;
     private Color bg = Color.WHITE;
     private int size = 10;
     public DrawingBoard(){
          JComboBox cbFont = new JComboBox(GraphicsEnvironment.getLocalGraphicsEnvironment().getAvailableFontFamilyNames());
          cbFont.setActionCommand("font");
          JComboBox cbSize = new JComboBox(new Integer[]{new Integer(14), new Integer(13)});
          cbSize.setActionCommand("size");
          JComboBox cbColor = new JComboBox(new Color[]{Color.BLUE, Color.RED, Color.GREEN});
          cbColor.setActionCommand("color");
          JComboBox cbBG = new JComboBox(new Color[]{Color.BLUE, Color.RED, Color.GREEN});
          cbBG.setActionCommand("bg");
          add(cbFont);
          cbFont.addActionListener(this);
          add(cbSize);
          cbSize.addActionListener(this);
          add(cbColor);
          cbColor.addActionListener(this);
          add(cbBG);
          cbBG.addActionListener(this);
     public void setMessage(String m){
          message = m;
          repaint();
     protected void paintComponent(Graphics g){
          super.paintComponent(g);
          Graphics2D g2 = (Graphics2D)g;
          g2.setColor(bg);//set background color
          g2.fillRect(0,0, getWidth(), getHeight());
          g2.setColor(color);//set text color
          FontRenderContext frc = g2.getFontRenderContext();
          TextLayout tl = new TextLayout(message,font,frc);//set font and message
          AffineTransform at = new AffineTransform();
          at.setToTranslation(getWidth()/2-tl.getBounds().getWidth()/2,
                    getWidth()/2 + tl.getBounds().getHeight()/2);//set text at center of panel
          g2.fill(tl.getOutline(at));
     public void actionPerformed(ActionEvent e){
          JComboBox cb = (JComboBox)e.getSource();
          if (e.getActionCommand().equals("font")){
               font = new Font(cb.getSelectedItem().toString(), Font.PLAIN, size);
          }else if (e.getActionCommand().equals("size")){
               size = ((Integer)cb.getSelectedItem()).intValue();
          }else if (e.getActionCommand().equals("color")){
               color = (Color)cb.getSelectedItem();
          }else if (e.getActionCommand().equals("bg")){
               bg = (Color)cb.getSelectedItem();
          repaint();
}

How do I change fonts in a Text field ??

Okay I've tried to implement a JComboBox that allows the user to change fonts in the text field. So far I've tried different methods to do it but to no avail. Could somebodoy here read the programs source code for me and tell me where I went wrong?
/* * My GUI Client */
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import javax.swing.event.*;
//for HTML Headers
import javax.swing.text.StyledEditorKit.*;
import javax.swing.text.html.HTMLEditorKit.*;
import javax.swing.text.html.*;
import javax.swing.event.HyperlinkListener;
import javax.swing.event.HyperlinkEvent;
import javax.swing.event.HyperlinkEvent.EventType;
import javax.swing.text.html.HTMLFrameHyperlinkEvent;
//for layout managers
import java.awt.event.*;
//for action and window events
import java.io.*;
import java.net.*;
import java.awt.GraphicsEnvironment;
//for font settings
import java.lang.Integer;
import java.util.Vector;
import java.awt.font.*;
import java.awt.geom.*;
public class guiClient extends JFrame implements ActionListener {
protected static final String textFieldString = "JTextField";
protected static final String loadgraphicString = "LoadGraphic";
protected static final String connectString = "Connect";
static JEditorPane editorPane;
static JPanel layoutPanel = new JPanel(new BorderLayout());
static JPanel controlPanel = new JPanel(new BorderLayout());
static JPanel buttonPanel = new JPanel(new BorderLayout());
static JPanel fontPanel = new JPanel(new BorderLayout());
static PrintStream out;
static DrawPanel dPanel;
static DrawPanel dPButton;
static DrawPanel dFonts;
static DrawControls dControls;
static DrawButtons dButtons;
static String userString;
static String currentFont;
String fontchoice;
String fontlist;
static JTextField userName = new JTextField();
public static JMenuBar menuBar;
private static JButton connectbutton = new JButton("Connect");
static boolean CONNECTFLAG = false;
//create the gui interface
public guiClient() {
     super("My Client");
// Create a ComboBox
GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
String envfonts[] = gEnv.getAvailableFontFamilyNames();
Vector vector = new Vector();
for ( int i = 1; i < envfonts.length; i++ ) {
vector.addElement(envfonts);
JComboBox fontlist = new JComboBox (envfonts);
     fontlist.setSelectedIndex(0);
     fontlist.setEditable(true);
     fontlist.addActionListener(this);
     fontchoice = envfonts[0];
//Create a regular text field.
     JTextField textField = new JTextField(10);
     textField.setActionCommand(textFieldString);
     textField.addActionListener(this);
//Create an editor pane.
editorPane = new JEditorPane();
     editorPane.setContentType("text");
     editorPane.setEditable(false);
//set up HTML editor kit
     HTMLDocument m_doc = new HTMLDocument();
     editorPane.setDocument(m_doc);
     HTMLEditorKit hkit = new HTMLEditorKit();
     editorPane.setEditorKit( hkit );
     editorPane.addHyperlinkListener( new HyperListener());
//Create whiteboard
dPanel = new DrawPanel();
dPButton = new DrawPanel();
dFonts = new DrawPanel();
dControls = new DrawControls(dPanel);
dButtons = new DrawButtons(dPButton);
     //JLable fontLab = new JLabel(fontLable);
//fontLab.setText("Fonts");
//Font newFont = getFont().deriveFont(1);
//fontLab.setFont(newFont);
//fontLab.setHorizontalAlignment(JLabel.CENTER);
JPanel whiteboard = new JPanel();
whiteboard.setLayout(new BorderLayout());
whiteboard.setPreferredSize(new Dimension(300,300));
whiteboard.add("Center",dPanel);
whiteboard.add("South",dControls);
whiteboard.add("North",dButtons);
     JScrollPane editorScrollPane = new JScrollPane(editorPane);
     editorScrollPane.setVerticalScrollBarPolicy( JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
     editorScrollPane.setPreferredSize(new Dimension(250, 145));
     editorScrollPane.setMinimumSize(new Dimension(50, 50));
//put everything in a panel
     JPanel contentPane = new JPanel();
     JPanel fontPane = new JPanel();
     contentPane.setLayout(new BoxLayout(contentPane, BoxLayout.Y_AXIS));
//add whiteboard
     contentPane.add(whiteboard);
//add editor box
     contentPane.add(editorScrollPane);
//add spacer
     contentPane.add(Box.createRigidArea(new Dimension(0,5)));
//add textfield
     contentPane.add(textField);
//set up layout pane
     //layoutPanel.add(GridLayout(2,1),fontLab);
     layoutPanel.add( BorderLayout.NORTH, fontlist);
     layoutPanel.add(BorderLayout.WEST,new Label("Name: ")); //add a label
     layoutPanel.add(BorderLayout.CENTER, userName ); //add textfield for user names
     layoutPanel.add(BorderLayout.SOUTH, connectbutton);//add dropdown box for fonts
     //fontPane.add(BorderLayout.NORTH,fontlist);
     contentPane.add(layoutPanel);
     contentPane.add(controlPanel);
     contentPane.add(buttonPanel);
//Create the menu bar.
menuBar = new JMenuBar();
setJMenuBar(menuBar);
//Build the first menu.
     JMenu menu = new JMenu("File");
     menu.setMnemonic(KeyEvent.VK_F);
     menuBar.add(menu);
//a group of JMenuItems
     JMenuItem menuItem = new JMenuItem("Load Graphic", KeyEvent.VK_L);
     menu.add(menuItem);
menuItem.setActionCommand(loadgraphicString);
     menuItem.addActionListener(this);
connectbutton.setActionCommand(connectString);
connectbutton.addActionListener(this);
     setContentPane(contentPane);
static private void insertTheHTML(JEditorPane editor, String html, int location) throws IOException {
     HTMLEditorKit kit = (HTMLEditorKit) editor.getEditorKit();
     Document doc = editor.getDocument();
     StringReader reader = new StringReader(html);
     try {
          kit.read(reader, doc, location);
     } catch (BadLocationException e) {}
//listen for actions being performed and process them
public void actionPerformed(ActionEvent e) {
//if the action is from the textfield (e.g. user hits enter)
     if (e.getActionCommand().equals(textFieldString)) {
          JTextField fromUser = (JTextField)e.getSource();
     if (fromUser != null){
//place user text in editor pane
//send message to server
               if (userName.getText() != null) {
                    userString = userName.getText().trim();
               out.println(userString + ": " + fromUser.getText());
          fromUser.setText("");
     } else if(e.getActionCommand().equals(connectString)) {
          CONNECTFLAG = true;
} else if (e.getActionCommand().equals(loadgraphicString) ) {
          final JFileChooser fc = new JFileChooser();
          int returnVal = fc.showOpenDialog(this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
               File file = fc.getSelectedFile();
               dPanel.loadImage(file.getAbsolutePath());
               sendImage(file);
     else if (e.getActionCommand().equals(fontlist)){
     JComboBox cb = (JComboBox)e.getSource();
String newSelection = (String)cb.getSelectedItem();
currentFont = newSelection;
     userString = currentFont;
return;
/*public void itemStateChanged (ItemEvent e) {
if ( e.getStateChange() != ItemEvent.SELECTED ) {
return;
if ( list == fontlist ) {
fontchoice = (String)fontlist.getSelectedItem();
     userString.changeFont(fontchoice);
//append text to the editor pane and put it at the bottom
public static void appendText(String text) {
     if (text.startsWith("ID ") ) {
          userString = text.substring(3);
     } else if (text.startsWith("DRAW ") ) {
          if (text.regionMatches(5,"LINE",0,4)) {
dPanel.processLine(text);
     }else if (text.regionMatches(5,"POINTS",0,5)) {
     dPanel.processPoint(text);
     } else if (text.startsWith("IMAGE ") ) {
int len = (new Integer( text.substring(6, text.indexOf(",")))).intValue();
//get x and y coordinates
     byte[] data = new byte[ (int)len ];
     int read = 0;
try {
     while (read < len) {
     data = text.getBytes( text.substring(0, len) );
} catch (Exception e) {}
     Image theImage = null;
     theImage = dPanel.getToolkit().createImage(data);
     dPanel.getToolkit().prepareImage(theImage, -1, -1, dPanel);
     while ((dPanel.getToolkit().checkImage(theImage, -1, -1, dPanel) & dPanel.ALLBITS) == 0) {}
          dPanel.drawPicture(0, 0, theImage);
} else {
//set current position in editorPane to the end
          editorPane.setCaretPosition(editorPane.getDocument().getLength());
//put text into the editorPane
          try {
               insertTheHTML(editorPane, text, editorPane.getDocument().getLength());
          } catch (IOException e) {}
} //end of appendText(String)
public void sendImage(File file) {
//find length of file
     long len = file.length();
//read file into byte array
     byte[] byteArray = new byte[(int)len];
     try {
          FileInputStream fstream = new FileInputStream(file);
          if (fstream.read(byteArray) < len) {
//error could not load file
          } else {
          out.println("IMAGE " + len + ",");
               out.write(byteArray, 0, (int)len); //write file to stream
     } catch(Exception e){}
//run the client
public static void main(String[] args) {
     String ipAddr=null, portNr=null;
          if (args.length != 2) {
               System.out.println("USAGE: java guiClient IP_Address port_number");
               System.exit(0);
          } else {
     ipAddr = args[0];
          portNr = args[1];
          JFrame frame = new guiClient();
          frame.addWindowListener(new WindowAdapter() {
               public void windowClosing(WindowEvent e) { System.exit(0); }
          frame.pack();
          frame.setVisible(true);
          while(CONNECTFLAG == false){}
//sames as previous client,
//set up connection and then listen for messages from the Server
          String socketIP = ipAddr;
          int port = Integer.parseInt(portNr);
//the IP address of the machine where the server is running
          Socket theSocket = null;
//communication line to the server
          out = null;
//for message sending
          BufferedReader in = null;
//for message receiving
          try {
          theSocket = new Socket(socketIP, port );
//try to connect
          out = new PrintStream(theSocket.getOutputStream());
               dPanel.out = out;
//for client to send messages
          in = new BufferedReader(new InputStreamReader(theSocket.getInputStream()));
               BufferedReader userIn = new BufferedReader(new InputStreamReader(System.in));
               String fromServer;
               while ((fromServer = in.readLine()) != null) {
               appendText(fromServer);
               if (fromServer.equals("BYE")) {
                    appendText("Connection Closed");
                    break;
          out.close();
//close all streams
          in.close();
          theSocket.close();
//close the socket
     } catch (UnknownHostException e) {
//if the socket cannot be openned
          System.err.println("Cannot find " + socketIP);
          System.exit(1);
          } catch (IOException e) { //if the socket cannot be read or written
          System.err.println("Could not make I/O connection with " + socketIP);
          System.exit(1);
class HyperListener implements HyperlinkListener {
public JEditorPane sourcePane;
public void hyperlinkUpdate(HyperlinkEvent e) {
if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED) {
sourcePane = (JEditorPane) e.getSource();
               if (e instanceof HTMLFrameHyperlinkEvent) {
HTMLFrameHyperlinkEvent event = (HTMLFrameHyperlinkEvent) e;
                    System.out.println(event.getTarget());
                    HTMLDocument doc = (HTMLDocument) sourcePane.getDocument();
                    doc.processHTMLFrameHyperlinkEvent(event);
else {
try {}
catch (Exception ev){
     ev.printStackTrace();
Well sorry the source code takes up the whole forum but I need a good feedback from this.

All right...
public class guiClient extends JFrame implements ActionListener {
static String userString;
static String currentFont;
String fontchoice;
String fontlist;
static JTextField userName = new JTextField();
public guiClient() {
     super("My Client");
public guiClient() {
     super("My Client");
// Create a ComboBox
GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
String envfonts[] = gEnv.getAvailableFontFamilyNames();
Vector vector = new Vector();
for ( int i = 1; i < envfonts.length; i++ ) {
vector.addElement(envfonts);
JComboBox fontlist = new JComboBox (envfonts);
     fontlist.setSelectedIndex(0);
     fontlist.setEditable(true);
     fontlist.addActionListener(this);
     fontchoice = envfonts[0];
//Create a regular text field.
     JTextField textField = new JTextField(10);
     textField.setActionCommand(textFieldString);
     textField.addActionListener(this);
public void actionPerformed(ActionEvent e) {
//if the action is from the textfield (e.g. user hits enter)
     if (e.getActionCommand().equals(textFieldString)) {
          JTextField fromUser = (JTextField)e.getSource();
     if (fromUser != null){
//place user text in editor pane
//send message to server
               if (userName.getText() != null) {
                    userString = userName.getText().trim();
               out.println(userString + ": " + fromUser.getText());
          fromUser.setText("");
     else if (e.getActionCommand().equals(fontlist)){
     JComboBox cb = (JComboBox)e.getSource();
String newSelection = (String)cb.getSelectedItem();
currentFont = newSelection;
     userString = currentFont;
return;

Heading changing font

Similar Messages

Maybe you are looking for