Heading for Different Types in Query designer

We have three different types Direct, Indirect and Others. Where Indirect and Others are fixed values and Direct types are dynamic which are getting from ECC.
So they are expecting heading before each type and result according to these types.
Tried so many options but not able to achieve the desired result as expected in Query Designer.
Please find the attached document for desired output
Please provide some inputs how can we achieve at the report level.

hi Naresh,
Structures are objects that you define in the BEx Query Designer. You can define reusable structures as well. they form the basic framework of a report. You can have maximum of 2 structures in a query. In such case you cannot have the same KeyFigure in both the structures.
You can also define a structure for a Characteristic.
Please check out these links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/4d/e2bebb41da1d42917100471b364efa/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/46/81fc706a23468ce10000000a114a6b/frameset.htm
Limitations of Structures usage
You can have maximum of two structures only ... One for kfs and one for characteristics..A characteristic can't be included in a KF structure and a KF can'be included in a characteristic structure...
We can't have 2 KF structures but we can have 2 Char Structure or 1 KF Structure and 1 Char Structure.
Regards
Lavanya.

Similar Messages

Can we put condition for color in bex query designer

hi all,
can any one guide me how to put a condition for color settings in query designer
for example:
i have a key figure like ANSWERED%.in analyser it should display in red if answered% exceeds 95%.
please help me in this issue.
regards
Vamshi D Krishna.

Hi,
Use Exceptions while designing your Query.
Please go through the link
http://help.sap.com/saphelp_nw04s/helpdata/en/43/21b4cd14cd06f4e10000000a422035/frameset.htm

Filter Information for two parameters in Query Designer

Hi Gurus !!
I have a problem for filter information for two parameters in Query Designer,
the first parameter correspond a Ejercise-Period, the second parameter correspond
a Compensation Date of document, both parmeters must have date less than or equal to
to the parameter date input for screen (mm.aaaa).
Internally the Report must filter countable information for Countable Date <= Parameter Input and
Compensation Date of document <= Parameter Input.
If i assign two filter parameter in Query Designer, not could realise this.
Exist any simple form to realise this ??
Wait for yours responses.
Thank You.

Hi shanthi bhaskar,
Thanks a lot for your answer.
I have one doubt about it: with this solution that you propoused the user will be able to select the values for plant?.
I mean, the user make the selection of the value for Zone, then he wants to see the in plan´s variable the values that corresponds with this Zone for make a new selection of plan.
What happens if I need this dependency also in another variable like time variable?
Thanks a lot

Sample CLASSES for different types of OIM components!!!

Hi Experts
Can any one provide me sample classes for different types of OIM components, adapters, scheduled tasks, etc. with your best practices for OIM java development and documentation? It would Help me lot.
Please let us know Links/Documentations.
Thanks
\oim_user

for schedulers
1. Create a java class that extends the SchedulerBaseTask (see example below)
2. Write your business logic
3. Compile and jar
4. Place the jar in the ScheduleTask directory in your OIM install
5. Create a new scheduled task using the OIM developer console
6. link in the new class into your new scheduled task.
7. Done!
Example code for a scheduled task:
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
public class ScheduledtaskExample extends SchedulerBaseTask {
public void init()
//this method is run before execute by the scheduler
public void execute() {
//is executed by the scheduler
runMyBusinessLogic();
private void runMyBusinessLogic(){
//place your business logic here
}

How to set different header for different Standard report page

How to set different header for different Standard report page

Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

HT5019 Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

Why can I not find a miniport to external monitor cable that works? I have bought for different types, two from Apple, cost me $300+ and still have no external monitor. Help, please.

What have you bought?
What model Mac are you running?
What input sources are available on the display you are connecting it to?

Help needed - setting password policies for different types of accounts

Hello,
We have a situation where we have different types of users created on a solaris server. We have regular users, admins, functional accounts and device accounts. Of course solaris does not differentiate between regular user and other types, i think. The default password policy applies to all the users on the server. I want to configure different policy for different types of user accounts. Is it possible? The difference between the accounts on our side is
Regular user accounts - 8 digit numbers ( 00667265) - expire password every 90 days
Functional accounts - 8 digits starting with F ( F0253466) - do not expire, but password length must be 10-12 and complex
Device Accounts - 8 digits starting with Z ( Z2367249) - do not expire, but password length must be 12 and complex - like upper case, lower case, number, special chars etc.
Is it possible to set up different password policies, is so how?

The password expiration policy is pretty easy, it can be set on a per account basis when the account is created. I'm not aware of a simple way to define a complexity policy for groups of accounts but the policy is enforced using pam, so you should be able to write a pam module which would enforce your complexity policy. The pam manual page would be a reasonable starting point for learning about pam.

What all is needed for this type of Flash Design Studio

What all is needed for this type of Flash Design Studio.
There are a couple of sites out there that use both flash and
shockwave. I am looking ot get somethign like this started and need
some help getting pointed in the right direction. here are some
examples:
http://www.uberprints.com/studio/
http://www.customavenue.com/online-design-studio/online-design-studio.html
https://www.youdesignit.com/youdesignit.cfm
http://www.pixeltees.com/make

Rclarkhaddock,
> What all is needed for this type of Flash Design Studio.
There
> are a couple of sites out there that use both flash and
shockwave.
Of the examples you showed, I saw Flash (Adobe Flash),
Shockwave (Adobe
Director), and JavaScript, but never a combination on the
same site. (It
might make sense to combine Flash with JavaScript or
Shockwave with
JavaScript, but not really to combine Flash with Shockwave.)
> I am looking ot get somethign like this started and need
some help
> getting pointed in the right direction.
Any of the above technologies will do it. You could also use
a Java
applet or even a .NET solution of some kind, so the choice
you take will
depend largely on what platform you want to support and code
for. This sort
of project will require significant amounts of custom
programming. My
personal approach would be to use Flash, mainly because of
the popularity of
the plugin. The Shockwave example looks beautiful, and I
started out years
ago using Director, but fewer people nowadays have the
Shockwave plugin
installed. It doesn't look like any of the sites shown use 3D
modeling,
which is the only relevant feature that Shockwave has over
the other
approaches. JavaScript (probably some Ajax approach) would
work -- as
seen -- but then you're dealing with compatibility issues
among various
JavaScript implementations in the great variety of browsers
out there.
Flash minimizes that, in my opinion.
All you really "need" to produce what you've seen is Flash
and some sort
of database back end (MySQL, say), which means you'll need a
bit of
middleware (PHP, ASP, Cold Fusion, etc.) to act as your
ambassador between
Flash and the database.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

How to restrict the attribute values for the user in query designer

Hi All,
I have a requirment where certain user would see certain vailes in the query desiner of the attribute.
The requirment is we have planing material which is attribute of material
When X user want to restrict the values for planning material ,where he is able to see all the planning material.But who is not authorized for all the value.
Ex: X user has authorization for see planning material 100,101,102. of material But when he try to restrict the planning material in query designer where is getting all values of planing material.
Or
is there way to blank the restriction help.so that he can't able to see values while restricting
Please some one can advise me on it..

Hi,
Let me sum up:
you have an object ZPLNMAT for the planning material
you have the object 0MATERIAL for material and this object has ZPLNMAT as attribute.
If you can restrict in the query designer, I suppose this attribute is then as navigationnal and also added in the multi-provider.
The object ZPLNMAT is checked as relevant for authorization, and you set up a role with the attached values of ZPLNMAT this user should have access to.
Are you sure the users are restricting on the ZPLNMAT object and not 0MATERIAL, because you should have everything now
PY

Hide a row or column for characteristic value # in Query Designer

Hi gurus,
I would if we could hide a result row / column if one of the characteristic value is #. The requirement is actually to remove the meaningless row / column from the whole result set. For example, I have a char Material Group in the column. Since not every Material is assigned to a Material Group, I will get the following layout:
Material_Group A
Material_Group B
Material_Group C
Is it possible to define in query designer so that the column with # will automatically not be displayed?
Thanks,
Meng

Hi Meng,
I guess we have the same users..
But there is one thing that is going to make a non sense on the report: if you do not display the "#" for material group, then the total of your query by material group will not be the summation of what is displayed on the screen...and if the user explort the information in Excel (pretty sure they will do so), you will have some calls that your query does not balance....
Based on that assumption, tell the users to assign a material group to the materials, so that this unassigned column disappears. You could even give them a control report listing all the parts that do not have a material group
If this is a standard business rule not to have a material group for all parts, then, what you could do is to change the text for empty rows for Material group, then the "#" will disappear and wil be under the text description you defined.
But keep in mind that your data is made of materials which do not have a material group in their definition, noraml or not ?
PY

Max number of viewers for different types of Flash Media instances

I'm looking here, under pricing: http://www.adobe.com/products/flashmediaserver/amazonwebservices/
For each type of instance, it lists the "Simultaneous connections". If the instance I want lists "1000 RTMFP", does that mean that I can only have a maximum of 1000 people viewing my live stream at one time?* What happens to person #1001 if there are already 1000 people watching? Or, does RTMFP mean something else?
Thank you!
Edit: I am using Amazon Web Services and Amazon Cloudfront to stream my event, which use FMS.

Waldemar,
there is no reasonable limit for the amount of TestSockets. But there is of course a limiting factor: the performance of the system, mostly RAM. Running 32 TestSockets shouldn't be a problem if the sum of RAM needed for each UUT does not succeed the available RAM.
To answer your further questions, you have to learn some things about the parallel/batch model:
Those models constists of two areas, one for global management and one for each socket. The area for each socket looks a bit like the SequentialModel, but differs due to synchronization issues (report, batch synchronization, ...).
The other area calls the socket area for each socket as NewExecution, meaning a parted dataspace for each socket. Another thing you have to know: each socket executes exactly the same sequence!
So the simplest way to accomplish your task is to generate one general sequence which handles all sockets. Using if-statements and precondition, you can then asign certain functions for certain sockets. You can always get the info, which socket is currently active by reading the RunState.TestSocket.MyIndex.
Synchronization you are looking for is indeed done with the batch-synchronized section.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to get mobile model name for different types mobile devices

Hi,
I have checked few thread in this forum about getting mobile model name at server. So far, i noticed the mobile name is set manually in the midlet as user-agent .
HttpConnection connection = null; connection = (HttpConnection)Connector.open(url); connection.setRequestMethod(HttpConnection.POST); connection.setRequestProperty("User-Agent","Nokia7110 Profile/MIDP-1.0 Configuration/CLDC-1.0");
i retrieve the header information from servlet like below :-
String userAgent = request.getHeader("User-Agent");
How to get mobile model name for different model devices , not by manually adding the model name in midlet?
Thanks in advance :-)

Hi,
In J2ME there is no method to get the model number from the device. how ever you can use the APIs provided by the device manufacturer if available. But still the APIs will not work with devices from other manufacturer or sometimes it will not work with the devices of the same manufacturer if the API is not supported. so it is better to send the device model name through the header.

Unable to see hierarchy nodes for a hierarchy in Query designer

For IO 0GL_ACCOUNT, we have many hierarchies defined.
In the query designer when i am trying to restrict the 0GL_ACCOUNT with one of the hierarchy say Hier1 the corresponding hierarchy nodes should be displayed so that i can select any nodes of my choice and can restrict.
Strangley instead of showing hierarchy nodes,it is showing" [ ]" with out any values.Checked in RSA1 ,the hierarchy with all nodes visible perfectly.No authorization settings created on any of these hierarchies.
hierachy is in active state.
Appreciate any suggestions on this.
Regards,
Swapna.G

Before restricting you need to select hierarchy for the characterstic and tick the activate hierarchy display checkbox

Can I apply Sort on 2 different Fields in Query Designer in SAP BI

Hi Experts,
I have a report 'Employee Education Report' where I have to apply 2 sorts .First sort has to be applied for 'Employee Name' so that employees are sorted from A-Z in ascending order and the second sort has to be applied on 'Education Completion Date' so that for each Employee we get the lastest completed degree at the top for each employee.

Hi Jyoti,
Yeah, I think that can be done in the DISPLAY tab of query designer..Did you try it?
First, click the Employee Name field..In the DISPLAY tab choose the field in SORT CHARACTERISTIC, SORT BY, and SORT DIRECTION..
Do the same for Education Completion Date field..
Regards,
Loed

Heading for Different Types in Query designer

Similar Messages

Maybe you are looking for