Heading in each page in a Sub Report
Hi,
I want to display a heading on each page in a sub report but the sub report doesnt have a page header. How can I do this.
Thanks,
Reena
Reena,
The best way is to do one simple step at a time.
Take out the DrillDownGroup Level for now.
Here's one possibility:
If you have groupings on the main report, sometimes you can go
to Section Expert / Suppress no drill down - formula box and write
something like:
NextIsNull(GroupName)
...so that when the group runs out of names, it will display the page header
you put this formula in.
What you're trying to do is:
Create a Page Header in the main report that will show above your sub report. This is a substitute for the fact that Crystal doesn't have sub report headers. How you turn it on and off is up to you.
You put the text that you want to display in the added page header e.g., page header b or c or ?
The Panda
Similar Messages
-
Header on each page in a CrossTab Report
Hi,
I created a cross tab report. The only place I can place it is the Report header. I have a heading that should be displayed on each page of the report, how can I do this.
Because the cross tab is in the Report Header I placed my heading in the Report Header only so it appears on the first page only. How can I make it appear on each page.
Thanks,
ReenaHi Reena,
Have you tried placing the Crostab in Report Footer? This way you can keep the heading in Page header and the Crosstab in Report footer so that the heading appers on each page. Rest all section which are not required can be suppressed.
Let us know if this helps.
Cheers! -
Repeat a Header on each page of a Report that includes expressions - Report Builder 3.0
Is there a way of repeating an header on each page of a report with the built-in expressions representing the new value on each header. Example, Page 1 is correct but page 2 - the permit number, address and Tract does not match up, it repeats all the
information from page 1.Hi KittyCat101,
According to your description, you want repeat a show with expression to show Permit Number and Address dynamically on each page. Right?
In Reporting Services, table header is not in any group row, so when you put expression with data field into header row, it will only return the first row of that data row. This is the reason why it always shows the information as Page 1.
In this scenario, we can make records group on Permit Number. Then we put the Permit Number and Address in the group header. Set page break between each group instance.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
How to add an image or static text in the header of EACH page of a cross-Tab report
Post Author: rtutus
CA Forum: General
Hi, I use Crustal 11.0.
I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
Items Jan Feb March .....................Total
Category 1
Item11 val11 Val12 Val13 Total values
Item12 val21 Val22 Val23 Total values
Item13 val31 Val32 Val33 Total values
Category 2
Item21 val11 Val12 Val13 Total values
Item22 val21 Val22 Val23 Total values
Item23 val31 Val32 Val33 Total values
Category 3
Item31 val11 Val12 Val13 Total values
Item32 val21 Val22 Val23 Total values
Item33 val31 Val32 Val33 Total values
The problem, I want to add a page header for each page of the report.
When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
Items Jan Feb March .....................Total
Category 1
Item11 val11 Val12 Val13 Total values
Item12 val21 Val22 Val23 Total values
Item13 val31 Val32 Val33 Total values
Items Jan Feb March .....................Total
Category 2
Item21 val11 Val12 Val13 Total values
Item22 val21 Val22 Val23 Total values
Item23 val31 Val32 Val33 Total values
Items Jan Feb March .....................Total
Category 3
Item31 val11 Val12 Val13 Total values
Item32 val21 Val22 Val23 Total values
Item33 val31 Val32 Val33 Total values
You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
Thanks a lot for your help.Hi Divya,
you could do for example in the wdDoInit() of the view
wdContext.currentContextElement().setPicture("picture.gif");
Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials. I have learned tremendously from them.
Hope this helped
Harald -
How to repeat group head on each page
I have problem with repeat group heaf on each page, I've ticked the option 'Repeat group head on each page' from the Change Group Option. But the group head didn't appear on each page when I previewed the report. Does anyone have a solution/explaination to this?
CheeersSorry Gents, I did't make my porblem clear.
To James Terry
Yes, My reports contain one or more sub-groups (only group 1's group header needs to be repeat on each page).
To Graham Cunningham
I found pages , containing only group 1's group footer summarized info, don't display group 1's group header. Just like what you said ' It will only repeat on pages that display group information'. Is this a bug or sort of default rule? What else can I do if I want the group header to repeat on each page no matter whether there is group info or not, besides moving the info from group header to pager header?
Thanks a lot.
Regards
Joseph -
I am trying to get BI Publisher to output a group heading on each page of my report.. At this time, I am using the Word/RTF version to build my layout.
I have information in the word document header and footer, and tried adding the group by column in the header, but that only returned my first group value, always!.
is there a safe solution? I have looked through the forum and seen many questions on this and not any simple answers..
Thank you,
Tony Miller
UTMB/EHNJust checking to see if you received the e-mail and the file that was attached... I am still looking for solutions to the issue..
Thank you,
Tony Miller
UTMB/EHN -
Repeating Group header on each page
Hello Everybody,
I have two groups in my report. For my first group value, i have given report - group expert - options and checked "Repeat group header on each page" assuming that my first group values will appear on each page. But it is not doing so. In one of the page the group footer values are appearing without my first group values.
I belive my problem is my second group values are ending in one page and first group values are extended to next page . Can any one please hep me.if that is the case Narukonda 1, there are several sap notes dealing with this issue...please see this sap note [here |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333133373339%7D.do]which deals with both orphaned group footers and group headers.
-
Repeat Group Header On Each Page not working
Hi,
I have a report that have 3 subreport, and in the Subreport, there is Group Headers that enabled the option "Repeat Group Header On Each Page". It works fine in the CR10 preview. However, the header won't repeat in the PDF generated by JRC.
Any Idea?
Thanks a lot!!Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari -
Repeat Group Header on Each Page in Subreport won't reflect when generate by JRC
Hi All,
I have a report that contain several Subreports. Inside the Subreport, there are Group Header section. I have checked the option of "Repeat Group Header on Each Page". It works fine when I preview in Crystal Report. But when I using JRC to generate the report result. The group header only display on the first page of the group details.
More, Crystal 10 Common Monthly Hot Fix (English) already installed.
Any idea?
Thanks a lot for your help!
DonaldHi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari -
Hi,
I have a problem of repeating the Header on each page.
I have tried using the following options going through other threads on this topic. But it didnt work.
1. In Table properties, repeat as header row at the top of each page
2. Header info <?start body?> body <?end body ?> footer information
Please help me out..
Thanks,
shashi1.
sorry you mis-understood it.
""In Table properties, repeat as header row at the top of each page""
this is to repeat the top row or selected row to repeat as a table header in every page on the top of the table, and not as the Page header.
2.
the elements occurring before the beginning of the body area will compose the header.
The elements occurring after the body area will compose the footer.
Use the following tags to enclose the body area of your report:
<?start:body?>
<?end body?>
So,this should definitely work.
http://winrichman.blogspot.com/2008/09/header-footer-using.html
for id , check in my profile -
Exporting or Printing each page of a Crystal Report to a separate pdf file.
Is there a way to export or print each page of a Crystal report to a separate pdf file? If possible, I would look to use the family nunmber field in my report as the file name. This is not required, but would be helpful. Thanks
Hello,
Standalone CR Designer doesn't have the ability but CR Server or BOE does. Or if you have a .NET or Java you could write an app that would spit out one page at a time.
Don -
Add different header for each page
We are using RTF templates to create XML Letters.
1) Is it possible to have different header for each page?
2) Can we have a data filed column in the header?
Thanks,Ha ha, Thanks, that is exactly what I needed! How perfectly obvious, but somehow easy to miss! Thanks so much.
Eric -
How to repeat the column header on each page of the report?
Can any of you please suggest me on how to repeat the column titles on a table if the table extends over several pages:
I tried the below action present in Re: How to make the column title needs to be on each page? It worked fine for the pdf format whereas its not working for rtf format output.
Can anybody help on this?I guess this has been taken as bug,
may be some patch got released for it..iam not sure.. -
Checking header on each page for memo field
Hi,
I have a report which has several details sections (4). In each detail section I have a title field and a content field. The content field is a memo fields and my problem is when the memo field goes on to another page it does not show the header.
I read somewhere about having the memo fields in sub reports and then in the subreport put a group in and the header in the group header and set repeat at top of every page to true. I tried this but my table is always empty because in vb code I create a memory recordset and set that as the recordsource. When I try to preview the report I get and error:-
This group section cannot be printed because its condition field is nonexistent or invalid.
I am getting I get this error because I have changed the datasource of my main report.
Is there another way to solve my issue?
Thanks for any help,
Jiggy!I have made some progress. I now get the report showing the subreport but because the detail section does not fix on page it is starting it on a new page. I want it to fill the rest of the page and then continue on to the next.
Any ideas please,
Jiggy!
Edited by: Jigabyte on Dec 13, 2011 3:29 PM -
ALV Display with header on each page.
Hi experts,
I had develop the report which output comes in ALV with heading. While printing the output, suppose there are 60 lines in output and 15 lines on each page so 4 page will print. Now i want the same heading will come on each page.
Is it possible? if Yes how?
Pls reply.
Thanks,
Abhishek.Hi,
Write the heading in the top-of-page.
You will have to register the event TOP-OF-PAGE and in the corresponding form write the header.
Regards,
Ankur Parab
Maybe you are looking for
-
How Do You Securely Wipe All Info Off Internal Hard Drive?
A friend has to ship her new iMac back to Apple for a replacement -- long story. But before she ships it off she wants to wipe the internal hard drive of all her personal info -- mail, photos, music, documents, ... What's the best way to securely wip
-
I have problem in web and e-mail
hello guys how r u? i have a problem i can't download anything from web (mobile browser) it ask me about the location i want to add my download and then the download box appear but no progress from 0% it stay fix at 0 and i try to download from fenn
-
Dynamic table selection from database
Hi ; I want to create variable field that I will use at database selection.I tried to do it with select * from ( tabname )..... but I couldn't do it how you any offer fot this issue.
-
All, i have the need for a trigger (Insert/Update) on a person table. if INSERT -create log record with new account id, datetimestamp, 'INSERT', batch control code (used for batch processing later in evening) -check child table to see if person on in
-
HTML Toolbar in Email Compose with Java WebDynPro
Hi Friends, We are working on a email functionality requirement and we are having a requirement to add a toolbar in the Email Compose Box. For ex. that toolbar contains Bold, Italic, Underline, and other HTML stuff. i.e. to decorate the text in compo