Heading wraps to 2nd line, but why data of 2nd line heading appearing in next page

Hi,
Im generating a matrix report which has dynamic heading. When the heading extends the page, it wraps to next line(2nd line). But the data corresponding to the 2nd line of heading is being displayed in the next page.
I wanted a solution to display the data of the 2nd line heading to appear just underneath the 1st line data.
Thanx in advance
Regards
Thobula Ramulu Rakesh

I'm assuming you only have one across repeating frame(?)
You will need to make the field that contains the heading in the across repeating frame large enough to contain the two rows you require.
Reports doesn't support expansion of the matrix column headings by default. If you have a definite requirement for the expansion to be dynamic (ie: push the matrix down), you can add another across repeating frame above the across repeating frame of the matrix and base it on the same across group. However, this can be tricky both to create and maintain.

Similar Messages

My safari is newly,but why the store on line remind to me that my safari need update?, My safari is newly,but why the store on line remind to me that my safari need update?

why the store on line remind me that my safari need update? but it is newly when I checking.

Open System Preferences > Software
(You can open System Preferences by clicking the Apple menu icon top left in your screen. From the drop down menu click System Preferences)
Select the Scheduled Check tab.
Click Check now
Click the lock icon bottom left corner of the window. Enter your admin password when prompted.
Now click the pop up menu next to: Check for Updates
You can choose Daily, Weekly, or Monthly.
And if you want the updates downloaded automatically, check that box.
You can see which version of Safari is currently installed. From the Safari menu bar click Safari. From the drop down menu click About Safari. You'll see the version number there. The most recent version of Safari is 5.1.2 running on Lion v10.7.2

Need to be able to type in a colon(:) in the Email line of setting up my ntlworld mail account. Able to put in a colon in the Name or Password line but not allowed in this line as presumably who ever heard of an email address with a colon.

How can I insert a colon(:) when setting up my ipad mini for a New Account ? (Mail, Contacts, Calendars to Add Mail Account to New Account)
Virgin media require a colon as part of the Email line . I can put in a colon on the line above or below ie Name or Password line but not this line

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

HT3783 I have created a distribution list of 22 names in my Contacts Folder. When I try to send an e-mail using the alias, only 7 of the 22 names appear in the address line. Why don't all the names appear?

I have created a mail box with 22 names in it. When I want to send an e-mail to this address and its recipients, only 7 of the 22 names appear in the address line of the e-mail. Why won't the remaining 15 names and addresses appear in the address line?

okay, this is actually a common problem. from your main screen select the blackberry key (next to track ball)->options->security->general settings->include address book->no->reset phone->problem should be fixed!
let me know if this works for you,
Andrew
Andrew Hager
U.S. Cellular Corporation
Smartphone Specialist

Every time i click anywhere, on any page, the blinking line that shows up when you're typing appears on the page.

for instance, when i was typing this question, the blinking line appeared in the box. when i clicked outside the box, it appeared next to the header above this form, as if i could type there.
a lot of the time, if i try to click away, the blinking line applies itself to the entire page. if i do manage to get it to vanish, i can't scroll with my arrow keys; if i don't, hitting the down arrow takes me to the bottom of the page, and hitting the up arrow does nothing.
i can still follow links and such.

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing]: press F7 to toggle
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
See http://kb.mozillazine.org/Accessibility_features_of_Firefox

HT1443 I bought the snow leopard disc to upgrade my macbook from 10.58 ... i inserted the disc but it will not let me on to the next page.. what could be the problem

I cant upgrade using the snow leopard disc i bought any suggestions as to why this is happenning?

Hello, is this the Retail Disc, or a Gray Machine specific Disc?
Does it meet the 10.6 requirements?
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

Why can't I just go to the next page?

Every time I want to go to the next page of a document in iBooks, the page just flicks back! I always have to swipe twice to make it go to the next page and this is especially annoying since I play piano and use it for sheet music.

have you tried completely closing out of iBooks? from the Home screen: double tap the Home button, once the taskbar appears hold down the iBooks icon until it jiggles, press the red icon in the corner to close iBooks. now launch iBooks and see if the issue is resolved.

Data of smartforms to be displayed in next page

Hi All,
I need to develop a Smartform for Salary Slip of employees.
There are 2 parts of the Salary - Earnings and deductions.
I need to display these details in the first page and when the records are more in number they should automatically go to the next page.
I also have to display total of both earnings and deductions and this should be diaplyed only at the last after all the earnings and deductions are over.
Any pointers or suggestions in this regard would really be helpful.
Thanks,
Saher

Hi,
you need to create two pages FIRST, SECOND
double click on first page give next page is SECOND
double click on second page give next page is SECOND
in the main window create table
under that create text node in that give like
v_total = v_taotal + wa_final.
bhupal.
Edited by: bhupal reddy on Sep 25, 2008 11:46 AM

How to get data in a line in reporting from 2 data sources

Hi
my infocube gets data from 2 datasources and once the data is loaded into infocube , its show the data from 1st datasource in one line and shows data from 2nd datasource in second line
my requirement is to show the data in reporting in a single line
EX: my first datasource has----
personnel no,name,age,position count
my second datasource has----
personnel no and salary
now i want all these fields in a single line in my Report
Regards,
Swamy.

Hi Narayana,
U can't achive the output in a single line by directly loading two datasources into the infocube.
If two datasources have same characteristics and if u show same key figure then they will come in single row ...when characteristics differ they will come in seperate lines
u can load the sec datasource to another dso and make a look with personnel no in the first dso to cube transformation then u can achieve it ....
Regards
vamsi

Why & remove: thin black line around new image?

Hi there.
PS CS3 (10.0.1)
Why does PS automatically make a thin black line around any new image and how can I set PS not to do this?
You can please have a look here:
http://www.josua.co.za/graphics/josua-banner.jpg
I will really appreciate your help.
Regards,
Deon

Thank you for replying to my question.
You are 100% right ... I have made the canvas a bit larger and there is no line.
BUT, why is there a line around the image when viewing in a browser? I dont' want it there and this is the first time I have this problem.
Thank you for your time & help.
Regards,
Deon

[Fwd: wls 7 console terribly slow ? but why]

Forwarding your message to the console newsgroup if they have any
recommendations.
Thanks,
-satya
-------- Original Message --------
Subject: wls 7 console terribly slow ? but why
Date: 25 May 2004 00:14:07 -0700
From: chris <[email protected]>
Reply-To: chris <[email protected]>
Newsgroups: weblogic.developer.interest.management
hi *,
i installed bea 7 to migrate from 6 to 7 and my biggest problem is that
console
of wls is terribly slow!
what are the greates pitfalls when configuring wls concerning console speed?
i got 6 servers configured not all of them are present now (are placed
in another
network yet)
my version 7 sp2
thx for any help

Forwarding your message to the console newsgroup if they have any
recommendations.
Thanks,
-satya
-------- Original Message --------
Subject: wls 7 console terribly slow ? but why
Date: 25 May 2004 00:14:07 -0700
From: chris <[email protected]>
Reply-To: chris <[email protected]>
Newsgroups: weblogic.developer.interest.management
hi *,
i installed bea 7 to migrate from 6 to 7 and my biggest problem is that
console
of wls is terribly slow!
what are the greates pitfalls when configuring wls concerning console speed?
i got 6 servers configured not all of them are present now (are placed
in another
network yet)
my version 7 sp2
thx for any help

Header window tiotle not printing on next page

Hi !
I have aa form in which I have a header table created inside the main window to print the titles of the line items, unit , unti price , Qty and totals. The next page has the similar format with the headerr table inside the main window, but unfortunately the header titles from the header title prints on the first page and when there are more items and the items are carried over to next page the titles dosent print on next page. Could nayone please tell me why the titles wouldnt be printing on the next page when the format is the same on teh next page also and it does have the texts to print there . Only the items are printing and not its titles.
Thanks,

Hi!
Thanks for your reply. We are anyways getting the header in the first page its that I am not getting the header titles on second page and folowing pages only. I do have a next page in my smartforms and as per teh design both the pages has the header wondow but still it dosent print on second page but prints on first page. What I ahve done is created an extra window on my next page and created temp[late under that with the header titles and this prints it oin the second page now.
Thanks

Refresh the Business Graphics Data on click of next page event of a table

Hi Experts,
We are using Business Graphics UI element in Web dynpro Java to display a table data.
We are limiting the graphics data to 12 table entries at a time.
Now, I just want to know how can we refresh the Business Graphics data when the user clicks on the Next Page option at the bottom of the table.
This is applicable if we have more than 12 table entries and we've restricted the visible row count to 12.
So, for more than 12 entries; when the user selects the next page, I want the next set of data to be displayed in the Business Graphics UI element.
But I am not able to get the action for the Next Page event.
Please note that we are on Netweaver 7.01.
Kindly suggest as how can we achieve this functionality.
Kind Regards,
Anurag

check this
Web Dynpro Java Table Paging Unleashed: Optimizing Heavy Table Performance

TS3899 I can preview email when it arrives (I chose 5 lines) but when I then go to open up the full email, I see only the header info (To, Subject & Date); nothing in the body...it is blank. This only started recently as before, it worked as expected. He

I can preview email when it arrives (I chose 5 lines) but when I then go to open up the full email, I see only the header info (To, Subject & Date); nothing in the body...it is blank. This only started recently as before, it worked as expected. Help?

I have two yahoo accounts and I know as they 'improved' their servers I had periodic outages. It'd work fine on my webmail on my computer, webmail on the iPad, but not via the mail app. And it was stuff on their end. It may be a case of wait and see and you may need to eventually remove/readd the account on your iPhone.
When the issue is on their end, unfortunately there's not much for users to do beyond wait it out or find work arounds.

Why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Mac OS X
iPod not recognized in iTunes and Mac Desktop
MacBook and MacBook Air: iPod won't mount when connected via USB hub
What to do if your computer won't recognize a USB or FireWire device
Thanks,
Matt M.

Heading wraps to 2nd line, but why data of 2nd line heading appearing in next page

Similar Messages

Maybe you are looking for