Headphone and mic sockets on Xtreme mus

Ok so i just installed my Xtreme music card and it went fine, but its the sockets on the sound card im not sure about?I have put my green speaker lead into the right socket (2nd from the left) and i have put my headset mic into the first socket and they both work great. The only problem is that i am left with my green?headphone plug/jack?(not sure the tech term) with no where to go other than where my speakers are plugged in?So this means every time i want to listen through my headphones i have to go to the back of my comp and swap the speaker and headphone jacks!
Am i missing something can someone please tell me a way to change from speaker to headphones without doing this?

The Black Cable is the one with the 0 pin connector that connects to the card. The other one is a cable running from the TAD connector to the 56K Modem card (internet) which i don't use. I just reattached it so it would't be hanging loose inside. Your motherboard is the biggest thing you will see inside the case. You will see the PCI slots where your video, sound, modem cards are seated. If you are uncomfortable opening your PC don't. If you want to have a looksee, power down your PC remove all cables attached including the power cord. Press the power switch momentarially to discharge the system. Open up the case and touch a metal part first to ground yourself. Piece of cake. If you have your user manual consult that first.
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Similar Messages

  • Connecting case headphone and mic sockets to X

    I want to be able to connect my PC cases headphone and microphone sockets to my X-Fi (XtremeMusic). I can't use the dri've bay expansion box thing because I have a door on my case, and it's too expensi've anyway.
    The AD_EXT connection on the card has many pins. Would I be able to just connect up the pins that are used for mic and headphones
    Any ideas/advice?

    That question was answered many times around here, you need just to search...Message Edited by SoNic2367 on 07-25-2006 08:27 PM

  • Can't get Headphone and Mic to work with Skype

    Hello, I have a 3 year old Macbook Pro and I am running OS 10.8.3. I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result. I finally phoned Skype support and they told me that there are some registry settings that are corrupted and that they could install the proper ones on my MBP for $149.99. I told them I did not want to spend that kind of money but I am curious if anybody else is having that issue and if anybody has a solution. Is it true that my registry values could be corrupted causing this issue. If I start up Parallels and open Skype in Windows 7 I have no issues whatsoever using the headphone. It works every time but I cannot get it to work on the Mac platform. I would appreciate any advice anybody might have. Many thanks in advance.
    Dan

    I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result.
    What are the system requirements of your headphones & mics?  It's possible they are not compatible w/Macs and/or your current OS system. 

  • I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up ever

    I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

    I have a macbook pro in which i use for church recordings. it has a built in mic so like one hole for headphones and mic. how do i get it to only pick up the sound from the external mic that is coming into the mixer to the laptop. it seems to pick up everything, like for example any little movement i make or even just asking the next person a question will get picked up by the internal mic. is there a way i can mute the internal mic so it can only pick the external mic and not every movement im making like chewing etc

  • Connect Headphone and mic

    In order to use Google phone, I want to purchase a combination mic. and headphone to connect to my mac mini, but I can't figure out how to connect to the mini. Will it connect into a usb connection or is there jack receptical to include the mic. Thank you.

    RJ and Omug:  Thank you for your helpful response. 
         However, I have found on line a USB adapter that will accept the mic and headphone combination with two individual jacks.  Will the a headphone and mic with two individual 3.5 mm jacks work on my mac mini by using the USB adapter with a powered USB hub?  There seems to be more selection at a lower price with the two individual jacks and the adapter rather than the usb connected headphone/mic.

  • Can the headphone and mic be used with 1st gen 8g iPod touch

    Hi,
    Does anyone know can the ipod touch headphone and mic advertised for 2ndG ipod touch be used on the 1st 8gb G ipod touch, i,e just for Skype.?
    regs,
    je2345

    As far as I know, this headset isn't compatible. I had one and tried using it with my 1st gen touch with no success.
    ~Lyssa

  • Headphone and mic jacks do not work

    I disabled the onboard audio drivers to install an Audigy 2ZS board in my new Dimension 900. Now the Dell factory installed mic and headphone jacks on the front of the computer do not work. I'm assuming thats because I disabled the onboard drivers? Any way to get them working with the 2ZS card? I understand that the mic and headphone jacks have cables that can be hooked to a card. Does the 2ZS support this kind of hookup?
    Thanks

    Hey everyone
    It's very possible to connect your front jacks to Audigy. I'm currently using my headphones that way.
    Here is what you do:
    . On top you audigy card
    <IMG src="http://images0.fotki.com/v203/photos//2786/2503093/CreativeAudigy2ZS-vi.jpg">
    2. Audigy pin assignments (connect you front panel cable to things marked in red)
    AUDIGY FRONT PANEL CONNECTIONS======================================= =========================
    - Analog Ground< 2 - Headphone Out (Left) 3 - Audio Backpanel Mute -- mute (ground) the backpanel when using headphones< 4 - Headphone Out (Right) 5 - same as #3< 6 - Mic Input 7 - key pin (shouldn't be there) 8 - VREF out -- voltage reference for Mic 9 - MIC IN MUTE -- ground when mic isn't plugged in, +2VDC when mic is plugged in0 - Audio cable detect -- will be ground when headphones are plugged in (not used)
    I'm still working out the kinks. For instance, if you've ever had an Audigy Dri've (comes with Platinum and Pro version of Audigy), you know that when you plug in headphones, sound to speakers mutes and Creative Speaker Settings panel automatically switches to "Headphones". That was nice. I don't know if it's possible this way.
    Enjoy,
    Igor

  • Headphones and Mic do not work with Vi

    I have a Soundblaster Audigy 4, and am using Windows Vista. The Creative Audio Console recognizes that I have a mic and headphones plugged in, but they do not work at all. Switching the audio output from speakers to headphones merely causes the volume to raise to 00%, but the sound still comes through my speakers. Any help out there?

    Try A to D
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (C) Reset all settings
    Settings>General>Reset>Reset all settings
    (D) Restore iPad
    1. Connect your device to your iTune (computer).
    2. Select your iPad when it appears in iTunes.
    3. Select the Summary tab.
    4. Click the Restore button.
    Note: Data will be lost

  • Audigy 2 ZS !!!!! headphone and mic hookup !!

    I need to hook up an AC97 cable for my headphone/mic but i dont know where i would plug up on the card. my cable it all seprate pinns so no problem for a strange config. if anyone has a diagram-layout-schematics for the board it would be greatly appreicated. i know there is a white connector w no label next to the TAD but i dont know what its for.
    if you know a refrance for hookin one up please post a link
    P.S. I have seen the same question asked but not found a worthy response just insults (on a few diff forums)
    (no disrespect but i have been searching for an answer fo awhile)

    oh man thanks a lot! i knew about that option too, but i completely forgot about it!! lol
    and let this be a reminder to anyone else dumb enough to forget about that little option!
    thanks again

  • Headphone and mic jack

    hello all .
    i have a hp pavilion with beats audio 15inch screen -
    i recently purchesed it at christmass.
    but i was using  my iphone earphones and skyping and the micophone jack wast picking up the mic on the earphones .
    it was still using the built in mic 
     i really do not want to go and buy a head set . i do like my iphone earphones 

    Hi @mcmanus90
    Welcome to the HP Support Forums! I saw your post regarding the problem using the iPhone earphones. Try setting them as the default recording device. This third-party link will show you how to do it. Now it is for Windows 7 but if you search for Control Panel from your tile page and go to Sound it will be the same from there.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HT3310 Can't get remote and mic to work at all with my iPad. Anyone else having this problem?

    Can't get EarPods remote and mic to work with my iPad 3. Anyone else having this problem and, if so, how did they fix it?

    I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result.
    What are the system requirements of your headphones & mics?  It's possible they are not compatible w/Macs and/or your current OS system. 

  • USB adapter for Apple Earphones that will let you use both audio and mic simultaneously for a phone conversation?

    I like the Apple Earphones (the iPhone headphone with audio, mic and remote) but I hate to keep plugging it on and off my Macbook Air. So I heard the only way to fix that is to buy a USB headphone so you can switch it on and off through software. Problem is that I like my Apple Earphones and I want to keep using it but now through USB. Is there a USB adaptor that will work with the Earphone, in other words, that will make both headphone and mic work at the same time for a phone conversation?

    Sonnet has an TB-capable expresscard adapter.
    http://store1.sonnettech.com/product_info.php?products_id=392
    FW800 Expresscard
    AND
    TB cable sold seperately

  • HT2844 Head phone and mic is not working in mac pro

    i have philips headphones and mic. this is conected but not working

    What part is not working?
    Do you get any sound out?
    Do you get any sound in?
    What does the contol panel indicate?

  • Headphones and 5.1 speakers?

    I have a 5.1 sound card and there are two plugs left. one for sound and the other for the mic, i tried plugging my headphone and mic in them but when doing the sound test i don't hear any sound coming from the headphone, i remember i used to have both sounds from my old 2.1 speakers and sound card.

    MillerDaMan,
    Which sound card you have? All I can think at the moment is you could have connected the headphone to the wrong connector jack on the sound card. It should be something like Line out .
    Jason

  • I just downloaded Mountain lion and I kind a wanted to listen to music on my computer screen then to my headphones and I also want to use the dictation Mic output so was wondering if it's at all possible to do those both of the same time, also using the s

    I just have just downloaded Mountain lion and I wanted to listen to music on my computer screen with my HDMI cable plug into my back of my screen and I wanted to talk to dictation on my regular standard iPhone headphone and I was wondering if it's all possible change your settings Mac Mini to set it so you can listen to those both like your headphones and use the mic in your headphones and there's no settings that would change in the Mac Mini so do there is a flaw in this system or I am just really really really really dumb.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

Maybe you are looking for