Headphone and speaker volume problem. Volume is not memorized.

I have the Helix i5 and the problem I'm having is that when I plug in my headphones, the volume does not automatically adjust. If my speakers are on full volume, so are my headphones when I plug them in. Please help me fix this. My Microsoft Surface never had such a ridiculous issue like this.
Solved!
Go to Solution.

Try.
Control Panel --> HW & Sound --> Realtek HD Audio Manager
On the top righthand side press "Device advanced settings" 
Choose Multi-stream mode
For me this unlocked separate volume sliders for speakers and headphones 

Similar Messages

  • My iphone 4 music and videos volumes are not working

    Please my iphone 4 music and videos volume is not working

    All you really have to do for that is to just either buy both a new charger headphones. What model iPhone do you have?

  • HP Pavilion dv2000 headphones and speaker playing at the same time

    Good Day HP
    Sir/Ma'am,
     I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
    And please forgive me for my bad english..
    Here are the system properties of my laptop.
    Windows 7 Professional Service Pack 1
    Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
    Installed Memory (RAM) : 1.00 GB
    System Type: 64-bit operating system

    HP Pavilion dv2000 headphones and speaker playing at the same time
    germanok wrote:
    Good Day HP
    Sir/Ma'am,
     I have a HP Pavilion dv2000 laptop that run in Windows 7 Professional 64bit. I have problem with this because my internal speaker and headphone playing at the same time. And i notice that when i go to sound setting my headphone is not detected but it is still playing together with the speaker and only the internal speaker is only appearing at sound setting. I try to install RealTek that is compatible to my o.s but not working. Do i need to downgrade it to Xp or Vista to solve this problem or there are some solution for this problem. Please help me i'm not technician to fix this problem.
    And please forgive me for my bad english..
    Here are the system properties of my laptop.
    Windows 7 Professional Service Pack 1
    Processor : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
    Installed Memory (RAM) : 1.00 GB
    System Type: 64-bit operating system

  • Ringtone play through headphone and speaker

    With the headphone (come with the box) plug into iphone 4, when I selecting the ringtone from the settings > sounds > ringtone, the iphone will play the sound through headphone and speaker. Same things happen either with silent/mute switch turn on or off. When in public area, I would like to have the ringtone to play through my headphone only not the phone speaker, is that anyway to do this?

    with iOS 4.1 on both my 3GS and my wife's iPhone 4, I can hear the ringtone through the headphones regardless of whether the phone is muted or not. I can hear through the speaker (with and without headphones) only when the phone is not muted...
    no setting for it, but it should work...

  • IPhone  no longer plays music through headphones or on speaker but will work when making a call on both headphones and speaker.

    my phone will no longer play music through headphones or on speaker but will work when making a call on both headphones and speaker. Also when I plug in my iPhone to a jack that uses a power amp like external speakers it works fine. I have no idea whats going on i've restored it twice and still nothing.

    did you update your phone?

  • Hello I recently downloaded an app on my iphone 4s - Remote mouse- so i can control my laptop that is connected to my tv, it used to work fine and now the connection fails, I downloaded another app and the same problem occurs, its not the firewall

    Hello I recently downloaded an app on my iphone 4s - Remote mouse- so i can control my laptop that is connected to my tv, it used to work fine and now the connection fails, I downloaded another app and the same problem occurs, its not the firewall and both phone and laptop are conected to the same wifi, i also tried to connect it manually with the ip address and still no connection, can you help??

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss) Try it again.

  • Mute button, low volume button and high volume button not working after upgrade to Win7 Pro

    Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Ringing Volume and Speaker Volume

    Ok..so, I saw the fix but it is temporary.. do we have any news for a permament fix from Apple yet?
    The volume suxs!

    I'm experiencing the exact same problem!
    When the maximum ringing volume is set, the phone will ring for about 3 seconds at a certain volume, and only then the volume will rise to the maximum. And it's set on "ringing", NOT "ascending"!
    Ideas, anyone?

  • Headphones and speaker simultaneou

    I have an Audigy 2 sound card with the latest driver available from this site installed. I have my desktop speakers plugged into the back of my computer and my headphone plugged into the jack at the front of my computer.
    I am trying to have my computer to output sound to both the headphone and the speakers at the same time, which I was able to do until my spekaers stopped working for a time and I worked with settings, trying to fix the problem. Both the speakers and the headphones will work seperately. Following advise from this forum, I went to Contol Panel>AudioHQ>Device Controls and unchecked the box labeled "Mute speakers when using headphones," but it appears the speakers are still muted when I plug in the headphones. Is there something else I should try?

    Using the cards front and rear jacks like this,
    front - headphones
    rear - speakers
    then in the speaker settings set it to 4/4. when you want to use both and enabled CMSS3D. If all you want is speakers you can leave it as it, turn volume down on the headphones if they have an in-line control, or in the CMSS settings slide it to all rear. If oyu want just the headphones go back to the speaker settings and set it to headphones.

  • A215-S7437 - headphone and microphone + soundcard problems

    Hi there,
    I searched in several parts of the Internet for instructions on how to make my headphone and microphone jacks work as properly as they were when I got a Toshiba Satellite A215-S7437 laptop.
    One day I heard an odd sound in my headphone and/or microphone outlets, and sometime (probably a day) later, my laptop completely froze (even I couldn't move the mouse) whenever I start running the microphone's driver.  Next, I found one thread in this forum saying that I must reinstall the Realtek audio driver, but when I did, and after I plug in the headphones and microphone, the speakers stay on, while the microphone doesn't function at all and the volume control on the bottom-right corner of the screen can't adjust the volume when the headphones and microphone were inserted, although the slider can still be moved.  Then I found another thread that said to set the headphones to default while making sure the microphone is unmuted.
    I'm also going to ask how to record audio on-screen, like using Audacity to record what's playing in an .SWF audio player. The desktops I have at home already included that function when they were brand new, but not this laptop.
    I need to know how to solve these problems.  I appreciate it.

    Hello?

  • Headphones and Speaker se

    I just purchased a Audigy SE and it works fine when i use either headphones OR a 2 speaker setup, i cant find a way to use both. For example sound wont come through the headphones and speakers at the same time, only if i switch leads around behind the computer. I want the setup like this so i can use the headset with microphone for VOIP and then the speakers when i dont need the microphone. Is there a way for a setup like this? Or am i missing something?

    Using the cards front and rear jacks like this,
    front - headphones
    rear - speakers
    then in the speaker settings set it to 4/4. when you want to use both and enabled CMSS3D. If all you want is speakers you can leave it as it, turn volume down on the headphones if they have an in-line control, or in the CMSS settings slide it to all rear. If oyu want just the headphones go back to the speaker settings and set it to headphones.

  • Satellite M30X-122: How to use headphone and speaker at the same time?

    Hi,
    is there any possiblity to use the headphone and the speaker at the same time?
    When I plug the head phones in the socket, the speaker is swtiched off now.
    Thanks
    Peter

    Hi Peter,
    Unfortunately there is no way to use both the headphones and the speakers at the same time. This is because tghere is as physical disconnection of the current to the internal speakers when you plug in the headphones. It is not software controlled. The only way of bypassing this would be to dismantle the headphone socket and permanently solder the connections which are broken when you insert the headphone socket.
    regards,

  • Headphones and Speak

    I bought a headset that has a separate headphone and microphone jack, which is different from the USB headset i had before, and i want to know if its possible for me to hear in headphones and from my speakers at the same time.
    Also if anyone is familiar with Ventrilo im wondering if there is a way to have all normal audio go through my speakers but to have just the vent audio(people talking) to go through the headset.
    Please i need help for this.
    Or does anyone know a headphone+microphone to USB converter that will work?

    Yes, you can do the Ventrilo if you have 2 soundcards.
    I don't know how one would get two different audio signals through the same soundcard, at the same time nonetheless, though, I could be wrong.
    Set whatever you want coming through the speakers as the default card in the Sound options of Windows.
    In the setup option for Ventrilo, the Output Device should be your other soundcard. (i.e., the soundblaster)
    So, if you want to play World of Warcraft and have the game sound out of the desktop speakers, and listen to everyone ramble on in Ventrilo on your headphones, the above is the way to go.

  • 10.4.9 and speaker volume

    hello everybody,
    just a little something i noticed after updating to 10.4.9 now: the volume of the speakers seems to be much louder now, as in: i can hear the bleep from the first bar on (not like from about halfway up like before). apart from that no issues with the update so far!
    cheers
    macbook pro   Mac OS X (10.4.9)  

    I'll "third" this as well. Volume levels in
    everything are now much much MUCH better!!!! Some
    podcasts that I listen to (ie Macbreak Weekly) are
    notorious for having highly uncompressed audio
    (meaning very hifi, but can be very hard to hear
    certain individuals when they move away from the mic
    inadvertantly).
    (Dougxd - let me guess, you're talking about John Foster on MBW, right??)
    anyhow, my MBP sound volume is same as others have noted after updating to 10.4.9. The volume controls now act more like what I was used to on my old Pismo, instead of having to crank it up quite a few bars to hear anything.
    aside from that - no problems noticed, so far...
    MB Pro 15.4" 2.33G C2D, iMac 24" 2.33G C2D, iMac 17" 1.25G G4, PowerMac G3 Beige   Mac OS X (10.4.8)   Airport Extreme 802.11n

  • My macbook pro has full charge but wont work sometimes and also volume is not working

    i charge my macbook pro at nite and i turn it off but when i wake up in the morning it has no charge....and also the volume isnt working

    Hold the option key down and click the battery icon in the menubar.
    Does it say normal?
    If not you have to take the MBP to the Apple store.
    No sound.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.    http://support.apple.com/kb/HT3964

Maybe you are looking for