Headphone help please!

I have headphones with two adapters, can they be used with a Mac Pro, and where do they go? 
There are two ports in the back and I tried another pair of headphones that I hate because they are over the ear and horribly uncomfortable, but plugging them into the head phone and the sound ports in the back, they did not work, even after selecting them in 'sound'.
Before I open this box, I want to know if I can actually use them.  I thought they were usb, but they are not.
Thanks.
bonnie

The headphones that come with iPod need replacing every now and again.
Just call Apple and they will send you a pair for free if under warranty.
*nathan

Similar Messages

  • My volume control is disabled after plugging in and unplugging headphones, Help Please...

    Dear all, this is my issue, I have since the beginning (October 2014) with my iPhone 5S, 64GB: My volume control is disabled after plugging in and unplugging headphones, Help Please...

    This should not happen if you have the output volume in System Prefs/Sound set low. Have you tried setting the ITunes player volume at top left a bit lower?

  • I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.

    I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
    Thankyou

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I can't pair my Bluetooth headphones, the iPhone 5 doesn't find the device. Can anyone help please?

    I cant pair my Bluetooth headphones to my IPhone 5 the phone doesn't find thee vice. Can anyone help please?

    Forget the pairing on iPhone and if possible the headphones ( see their  user guide ) and start the pairing process again from "new"

  • Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    No sound form :
    - Speaker?
    - Headphones?
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Help please no luck recording vinyl thru line-in port on External USB Soundblaster Live 24bit

    Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.

    hardingt2345 wrote:
    Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.
    Have you tried by installing www.asio4all.com drivers and then by using some?ASIO capable recording software as like Kristal, VSTHost, Reaper, etc (there are many others available)?jutapa

  • NEED HELP PLEASE! URGENT

    Hi guys. My iphone 3gs digitizer wasnt completely functional because some parts of it didnt respon to touch, so I decided to replace it myself since there are no apple stores around where I live. I bought a digitizer set with home button and speaker etc. So only thing I had to do was to unplug 1,2,3 connectors , remove the lcd from old digitizer, and place it in the new digitizer. I did that succesfully, but when I tried to reconect everything, a problem occured. I accidentally ruined lcd flex cable so the lcd cannot be connected to the logicboard. Logic board is fine, but the flex cable is messed up and I need to buy a new lcd. I connected #3 and #2 connectors to their place on the motherboard and left the #1 connector unpluged because it cant be plugged in. I powered on my phone, and noticed that the screen was black ( as expected ), and another problem occured which was that my phone could not respond to touch. I can receive calls ( i plug my headphones and use the button to answer call and then unplug them and I can hear the voice on the other side of the speaker so that means that i plugged #3 connector correctly ) I tried reconnecting #2 cable and I know its plugged correctly in the motherboard but the phone is still not responding to touch. I tried a hard reset, and it didnt help. I dont want to restore my phone because I wont be able to activate my phone and wont be able to receive calls. SO IS MY #2 CONNECTOR RUINED ON THE LOGIC BOARD OR THE LCD NEEDS TO BE PLUGGED IN IN ORDER FOR DIGITIZER TO WORK? help please ( i tried with an another digitizer and the same lcd and have the same problem, help me please

    As I said above, there are no apple stores near me. There are no apple stores in my country at all. The closest apple store is 2000 km away from where I live, and my phone wasnt under warranty anyway and I dont care about warranty at all. I just want to know the answer to the question I asked above. Thanks for your response anyway mate, cheers

  • Help please with 2006 Macbook 13inch, for tv hook up.

    Help please with 2006 Macbook 13inch, to hook up to tv for streaming. The display works through VGA but the audio isn't working. Got a plug that goes into headphone jack on computer and connects into the audio jack on the back of tv but no sound. I'm not quite sure what the issue is, whether its the wrong plug, the tv, or the computer. Best Buy says this is the right plug and it seems that it would be, but who knows. If anyone has any experience in this, I would appreciate the help!

    Make sure those audio plugs are matched with the VGA plug. With your MacBook running something with audio switch between your sources on the TV Component, Composite and such. See if the sound is coming from another source. If so then you've got your audio plugs in the wrong jacks.
    Also could you post the make and model number of your TV.

  • Motorola ,motorokr s9 hd bluetooth, will not skip tracks, any help please

    hi just got bluetooth motorola motorokr s9-hd headphones, paired fine, sound great but when try to skip songs on the headphones it will not let me do that, can anyone advise with any help please .....thanks

    thanks for that help, just been checking some forums and stuff, so hopefully next firmware will be able to do this, at moment i am using voice control and seems to do the trick....thanks

  • After updating to latest iOS my iphone 4 is mute, at start the other party couldn't hear me, now I cant hear anything not even the ringing tone. This happens only if make regular  calls through my carrier. If use viber all ok. Help please?

    After updating to latest iOS my iphone 4 is mute, at start the other party couldn't hear me, now I cant hear anything not even the ringing tone. This happens only if make regular  calls through my carrier. If use viber all ok. Help please?

    I read on another discussion that sucking air out of the headphone slot works, I tried it and guess what, it worked.......weired....apparently something to do with moisture accumulation....!!!!!!

  • TS2771 my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

    my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

    - Try inserting/removing a earphone plug a dozen or more times.
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be a bad headphone jack.

  • I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    I keep being asked to update my Safari but when I do a Software update it scans but never gives me a list and just says no new updates. Help please!

    There are no updates to either OS 10.5.8 or Safari 5.0.6.
    If you need a later version of Safari you must first upgrade your operating system to a later version of OS X.

  • At the end of my IMovie I want to write some text: as in" Happy Birthday Mandy we had a great time with you. etc..  How do I go about this? Which icon in IMovie lets me have a place to write text?? help please

    Please see my ? above: Im making an IMovie and need the last frame to just be text (can be on a color). I don't know how to go about doing this.  Ive already done all my photos and captions. Need to have it ready for TOMORROW: Friday May 23rd. Help please!
    Thanks

    You can choose a background for the text from Maps and Backgrounds.  Just drag a background to the end of the timeline, adjust to desired duration then drag title above it.
    Geoff.

  • I have just updated my PC with version11.14. I can no longer connect to my Bose 30 soundtouch via media player Can anyone help please

    I have a Bose soundtouch system .Until today I could play my iTunes music through it via air  player . .I have just uploaded the latest upgrade from iTunes and now I am unable to connect to the Bose system . Can anyone help please? I can connect via my iPad and by using the Bose app so it is not the Bose at fault

    @puebloryan, I realize this thread is a bit old, but I have encountered a similr problem and wondered if you had found a solution. I've been using home sharing from itines on my PCs for years, but two days ago, it suddenly stopped. I can share from my Macs, but not from the ONE PC library where I keep all my tunes. I tried all the usual trouble-shooting measures.
    After turning home sharing off on the PC's iTunes, turning it back on and turning some other settings off and on, my Macs and Apple TV could briefly "see" the PC library, but as soon as I try to connect -- the wheel spins for a bit and then the connection vanishes. It's as if they try and then give up.
    Since this sounds so similar to your problem, I was hoping you finally found a solution. I am also starting a new thread. Thanks!

  • My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

    My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
    Thank. Simon

    Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
    Thanks, Simon

Maybe you are looking for

  • Keyboard layout and Sun Ray

    Hi all, We're using the Sun Rays in a VDI environment, but there is a mixture in keyboard layouts: qwerty and azerty. The session detects the correct keyboard layout, but it doesn't pass it to uttsc. Is there any way to detect the keyboard layout and

  • Sun Enterprise 220R to Dell Poweredge 2161 DS-2 KVM

    Hi there, I have a some Sun Enterprise 220R servers with graphics card and one 8 miniDIN female socket for Keyboard/mouse - I would like to connect this machine to a Dell Poweredge 2161 DS-2 KVM for remote control. The solution I have come up with is

  • Illustrator CS5 won't stay open it shuts down when started?

    I have the CS5 creative suite and I bought it when it was first available. I have used it for several years with no major problems. In the past two days every time I start up my Illustrator program it goes through all the start up proceedures and as

  • When I try to set-up iCloud, I get error message "Verification Failed"?

    When I try to set-up iCloud, I get error message "Verification Failed - The certificate for this server is invalid. You may be connecting to a server that is pretending to be "setup.icloud.com" which could put your confidential information at risk." 

  • Verizon in Puerto Rico

    does extended coverage mean that it is charged as part of my plan with no additional fee?