Headphone is not working

I have updated my IPad with latest OS and facing problem while listening songs connected thru headphone. On speaker, I'm able to hear them. I don't know what is the problem.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

  • Iphone 4 headphone socket not working headphones won't go all the way in

    My iphone 4 headphone socket not working, the headphones won't go all the way in? any help, ideas?

    I bough a new ipad two a few feels ago and still haven't managed to used any headphones with it.
    It's very annoying as I'm currently in hospital and will be for a few more weeks and this being the reason I bought it!! Now I have to have it on very low volume and not use it in the evening  

  • Headphone is not working after plugin pavillion dv6000 CNF6430M51

    Product :        Hp Pavillion dv6000
    Serial    :        CNF6430M51
    Product no. : RG254UA
    this is the first time i sending you my first problem
    since i have formated my system my new headphones are not working after plugin i have intalled sp34200 aslo but it is not fix my problem
    Please help me out this
    reply soon as you can
    thanking you
    kareem...

    Your models driver page is in the link.You need the 'Microsoft Universal Audio Architecture (UAA) Bus Driver' before   correct Audio driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3245620&task=&
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • One headphone does not work or works 50% of the time.  What is best way to resolve?

    one headphone does not work or works 50% of the time.  What is best way to resolve?

    First of all, I'd recomend resetting the iPod. Do this by pressing the 'Menu' and 'Center" buttons for 10 seconds or until the Apple logo appears.
    If this doesn't work, then it sounds like a hardware fault.
    To identify the issue, if you have one, try plugging the iPod into a speaker through the dock. If this works, then the issue is with the headphone jack. If not then the logic board is dead.  If the iPod is less than a year old, then it can be repaired by Apple for free. Just book an appointment for the Genius bar.
    If not then, you could see about sending it to an iPod Repair Company, such as my own. A replacement headphone jack would cost £30.00 in the UK, including next day delivery. Other companies you could try would beUKiPodRepairs, but we guarantee to beat any quote that you get.
    Hope that this helps,
    Mark Sweeney
    Dr Pod Founder

  • Internal speakers and headphones are not working

    I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

    Hi,
    It could be either Hardware or Software related, so try the following and let me know.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My headphones are not working on my I pod 5 they Work a little but then stop how can I fix them

    My headphones are not working for my iPod 5 they work a little but stop how can u fix them

    first line in return for warranty should be the place one bought the place
    same with a car then you should not be expected to ship it to toyota in japan yourself
    and if you coka cola have an issue you don't have to take direct contact to cola company and the likes...

  • I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

    Hi there,
    It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    -Griff W.

  • I recently installed vista to my mac (32bit)...my headphones are not working. I can't find the 3.5mm jack that apple suggests using. I have tried installing/unistalling several different audio drivers. Does anyone know how to solve this problem?

    I recently installed vista to my mac (32bit). My headphones are not working on it. I could not find the "3.5mm jack" that apple suggests to "solve" this issue. And I have tried installing/uninstalling audio drivers. Can anyone help?

    you don't need several drivers, you just need the audio driver for your Mac, which you didn't list, but would be Cirrus or RealTek.
    Along with uninstalling programs, go to Dev Manager and uninstall driver, or even rollback driver.
    some people have trouble installing or finding driver that will install.

  • My headphone is not working on macbook air 11

    I have a macbook air 11", and after upgrading to mountain lion, my headphones are not working.
    I have tried with multiple headphones and multiple software (itunes, skype, etc.), and I can´t hear.

    First, turn the volume up.
    Just kidding.
    Do the internal speakers work?
    Check Audio MIDI Setup (Applications -> Utilities).
    If all looks good but still no sound, ask yourself - and check - if any 3rd-party apps or drivers are installed and running (-> Login Items?) that deal with sound. Update to ML-compatible versions or completely remove them.

  • My speaker as well as headphones are not working in hp pavillion dm4 1101tx series

    my speaker as well as headphones are not working in hp pavillion dm4 1101tx series

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp51501-52000/sp51937.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    If you still have no audio, open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Start-up Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    If you need to make a change to any of the above, just right click the service and select Properties, then in the dropdown box next to 'Start-up type',  select Automatic and click Apply to save the change.  Then click the Start button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HEADPHONES do not work when plugged in - iMac Intel

    So I reinstalled the operating system a few months back. After completing this my headphones do not work when plugged in. I do have them plugged into the correct jack. When i plug them in the built-in speakers go silent for a second or two as if the headphones are working but then the speakers kick back in with no sound in the headphones.
    The headphones worked just prior to reinstall so I'm not sure its the jack itself but something in the operating system.
    I have also checked in System Preferences 'Sound' and when they are plugged in, they do not show in the devices window.
    What the heck is going on? I've read in other forums that this seems to be something of a typical problem but have not found a solution to the problem.
    thanks in advance for your help.
    Message was edited by: ikuchyacokov

    Welcome to the discussions.
    Mate, it sounds more like a system glitch than a hardware issue. I too have been experiences some 'funky' issues. However, they have all been fixed by running Onyx disc maintenance software. Install Onyx and run 'automation'. You can cancel the disc checking operations on start up and ignore the back up disclaimer. Give it a go and post back with the results.
    Onyx - http://www.titanium.free.fr/download.php?sid=6d79ad9269e8f01484b51a1056277186
    Make sure you get the right version for your OS.

  • Yesterday suddenly the sound output from my Headphone is not working

    Hi, I've Mac Book Pro 15" with Retina display. Yesterday suddenly the sound output from my Headphone is not working. When I tried to solve this, I've noticed in system preferences it's jumping from Internal speakers to Head phone and vice versa. Can anyone help me on this issue please? I am using the original Apple Headset only.
    Thanks
    Babu
    <Re-Titled By Host>

    Tell us:
    OS X version ?
    What may have changed prior to the onset of the issue of "... suddenly... not working..." and " ... preferences ... jumping from ..." ? Software added, upgraded, updated?
    what precidely do you mean by " ... preferences ... jumping from ..." ?
    ÇÇÇ
    EDITadded
    I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " MacBook Pro " where it may get a more rapid response from your fellow users.
    endEDIT

  • What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
    Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
    Apple officially refurbished equipment is usually good quality.  Surprising this has happened but you need to press on with complaints and try for resolution.

  • I just downloaded Windows 10 and now my headphone will not work, the other caller can't hear me.

    I just downloaded Windows 10 and now my headphones are not working and the other caller
    can not hear me.

    Please download and install the driver from the following weblink:
    http://ftp.hp.com/pub/softpaq/sp50001-50500/sp50498.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • IPhone 4 headphone jack not working right.

    So the headphone jack in my iPhone 4 i don't think is working properly. The right headphone does not put as much sound out as the left. I'm not sure why it was working perfectly just yesterday. I haven't dropped it or got water in it or anything. I tried plugging it in and unplugging it a few times, i reset my phone, turned it off then on and nothing seems to be working. Its not on silent and the volume thing is centered. Idk what could e happening. Help!!!

    I would test the headset in another device such as a computer
    and test another 3.5mm minijack headset in the phone to tell if it's the phone or headset

  • MacBook speakers and headphones are not working! Please help.

    MacBook OS X 10.6.8
    2009 model
    I was watching a movie and my MacBook randomly shutdown by itself. I turned it back on and had no more problems, so I restarted the movie. The audio was not working in my headphones. So I tried the internal speakers and there was still no sound. I did a quick google search which led me to trying various options and finally called Apple Support on the phone.
    I've tried resetting my PRAM but it only showed an alternating screen between grey and black. Nothing happened. I also reset SMC but that didn't work either. I have checked everything in system preferences, Audio MIDI, etc. and it all appears to be correct.
    While on the phone we found that when I plug headphones or an external speaker in, it does not show up on the "output" menu under System Preferences > Sound.
    I do NOT have the money to go to a computer store and the nearest Apple Store is 2 hours away. I desperately need help because most of the work I do involves having to be able to listen to sound. Please help if you can. I'm not ignorant when it comes to computers but I'm no genius. If you have any ideas, please be specific. Your help is very appreciated.
    PS. When a speaker is plugged in at first, I hear a little crackling from it. The same happens to what sounds like internal speakers if I start a video.

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for