Headphone is working weird?!

My iphone's headphone plug was working very good until one day, I have no idea waht happened.
I unplug it from my car, and when I plug in an headphone again, weird things happened.
the left side of my headphone will sometimes muted depend on how I hold/put my iphone. Sometimes keep holding the headphone harder will help, but once I release it, the left side won't have sound.
Anyone know what's going on and is it possible to fix it?

anyone can help me out please?

Similar Messages

  • Weird sound issue. Windows sound splitting into two volume sliders and headphones stop working

    So I am a network admin thus I am not exactly computer illiterate.
    Normally my latop has one volume slider for Speakers and Headphones, however when exiting a game or unplugging/plugging in a usb device windows will suddenly split volume into two seperate sliders for speakers and headphones, it isnt doing it right this second, but it looks like it thinks my headphones are a headset when this happens.
    After this happens my headphones stop working completely and only speakers work. To get sound back to normal I have to reset the computer, after I reboot everything is fine and it goes back to one  volume slider. I am using a normal set of headphones no mic, no bluetooth.
    Anyone have any ideas?
    Thanks.

    bump...

  • U405-S2830 Headphones Not Working

    A week ago I made a clean install of my Vista Ultimate SP1.  Everything went without any problems except my headphones no longer work nor is the option recognised in the devices.  In the Sound Devices list it only lists SPEAKERRS and SPDIF INTERFACE and not Headphones like it usually has done.  In the year and a half I owned the laptop I have never had this problem before.  They always worked when I plugged them in and Vista automatically switched from Speakers to Headphones.  The weird thing is not only do the buitlin speakers work but they turn of when I plug the earphones in and turn back on when I unplug them.  So physically it seems like stuff is working.
    What I have done is this to try and fix the problem.  Update the audio drivers, uninstalled reinstalled, rollback the driver, clean install vista, clean install windows 7.  I tried installing XP but always get blue screen when installing.  (A new topic elsewhere) I installed the driver immediatly after a clean install.  Another note in the past I have used those OS's and the Headphones worked.  I have even checked the BIOS.  I have tried US and European drivers.  Old drivers and new drivers.  I have tried restarting with the Headphones plugged in etc.  Nothing works I can think of.  Pretty frustrating.
    I have a U405-S2830 Laptop.  I reside in the US and utilize the US drivers.  I am currently running Windows Vista SP1.  The driver is a Conexant High Def audio driver.  Any help is appreciated.

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

  • Why does my headphones only work out of one side on my iphone?

    When I put my headphones into any device i have, both sides of the headphones work, except when using my iphone. When I play music in my ipad and computer with the same headphones they work perfectly fine. Then when I put them into my iphone only the right side works. I just don't understand why the one side works but the other one doesn't. I know it isnt my headphones, because they work perfectly fine in any other device. Someone please help me.

    I have the same problem, except, weirdly, I have it with respect to my iMac, my iPhone and my iPad all at the same time.  It is afflicting multiple outputs (both speakers and earphones) so I know it's some kind of problem with the devices.  I can't believe all the jacks are broken, but I also can't find any way to modify the balance settings on the mobile devices.

  • My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • HT3310 how do i get my headphone to work with the iphone?

    how do i get my headphone to work with the iphone? Are there some settings
    that I need to turn on so I can use my headphone while talking on the phone?

    Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack. 

  • HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

    My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

    Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
    (I'm using an ipad 2 iOS 6.1.2) 
    And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
    No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

  • My iPhone 5 is not charging properly and only the left speaker in any headphones is working

    Hi folks my iPhone 5 is not chagrin properly and only the left speaker on any set of headphones is working how do I report to apple

    Will not turn on, will not turn on unless connected to power, or unexpected power off
    No sound through stereo headset

  • Remote on Headphones not working...and it isn't fluff

    Hi,
    So today randomly the remote on my (latest Apple) headphones stopped working. As in it won't play, pause, skip, adjust the volume, or start voice control. I know it's not the "fluff" people on other threads have talked about swabbing out of your headphone jack because a) I tried that and b) the remote doesn't work on multiple devices I've use it with in the past. I don't know if this is related to the wire because I hear sound out of the right plug, but the remote on the right wire doesn't work. And this literally just happened today.
    I bought an iPod touch 4G last September w/ Apple Care, and then bought the remote headphones for $30 from apple in February. Does the AppleCare cover these, even if I didn't buy them with the iPod? (probably not, stupid question). Can I swap these for new ones after 7 1/2 months? I'm not paying $30 AGAIN because the remote feature just stopped working one day, in the middle of a bunch of days of normal usage. And that feature is the reason I went and spent the $30.
    Any suggestions? Any policy/warranty stuff? Anything will be appreciated since I use the play/pause/volume buttons pretty much every day.
    Thanks!
    Jake

    I would bring them into your local Apple Store/Genius Bar and demonstrate this issue to them.  The headphones should still be covered under the 1 year warranty against manufacturer defects meaning Apple should swap them out of for you.  Either way, a trip your local Apple Store would be your next best bet.
    B-rock

  • I cant get my headphones to work in the headphone port. i know they work because they work fine on

    i cannot get my headphones to work while they are plugged into my laptop. i know the headphones work fine because they play through my ipod. and information would be grand. thanks

    Have you tried changing the flexi jack mode in the console [email protected]

  • T5400 I cant get the headphones to work on this system

    I recently got this system for xmas. I actually have two issues....when i run a speaker test all speakers work, but when i am playing music, i use winamp, the center speaker does not work. I also can not get headphones to work either. Any tips?
    Message Edited by QtLostInOz on 01-11-2005 07:57 PM

    you need to go into winamp and go to the output plugins and I forget which one it is but you need to configure the output plugin to enable 5.1 music. When I get home I will check and give you the full where to go and what to do thing.

  • I cant get my headphones to work on my laptop

    I have a HP Pavilion dv2025nr notebook and I haven't been able to get my headphones to work since I changed my operating system to Vista Enterprise.
    Can anyone tell me what driver I need to dl to get it working again?
    I appreciate any and all help!  Thank You!

    Hi,
    please try updating BIOS and audio driver for your notebook. there are many updates on the beats audio drivers.
    Good Luck !!!!
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Ipod video right headphone not working

    i think the prong in my ipod video is out of place, if i hold the jack down and on an angle, it works in both ears but if it moves out of its place, the right headphone wont work. is there a way to fix it by myself? can i move the prong back into place? or do i need to send it in for repairs and if i do will they wipe my hard drive?

    wow. i just came across the same problem just a couple of days ago. My ipod was working fine in the morning and when I got off of work I got no sound out of the right earphone. I bought new headphones cause this has happened before and it was the headphones, but like you said, when pressure was applied to the jack it was only then that I got sound out of both earphones. Ive had my ipod for almost two years now and it is still in really good condition and I dont really know what could have brought this on. Is this a pretty common thing to happen? I had a 3rd generation before this one and had to send it back after a year or so because the battery died, but I did not have this problem with that one and was actually a lot rougher on it. Sorry for the long post. Thanks for the input.

  • Headphones stop working after a certain time and the notification for sound change has disappeared

    HP Pavilion dv6-6176sa
    Win7 64bit.
    I have a Pavilion dv6, and occasionally no sound will go through headphones when the jack is plugged in. The headphones themselves are not at fault, they are brand new and work fine.
    When the headphones are plugged in, the sound will only go through the laptop speakers. I've tried updating the drivers, fiddling with the jack and socket (as I read on google), the only resolution I have found is to restart the comp, which is a bit of a pisstake in all fairness and I'd rather not do that every time it happens.
    5 minutes ago I was watching a TV show, listening through the headphones, when I pulled out my USB mouse (and accidentally the charger with it). The sound then switched from the headphones to the speaker.
    If I open the sound settings, it will display the headphones as being plugged in, but the sound indicator bar (thingy) will only rise and fall on the speaker icon bar.
    Currently I have the audio jack pulled out about a centimetre, this allows sound through the headphones, but the sound is noticeably different to what it should be.
    I had rolled it back to "High Definition Audio Device", then reinstalled it to the most current driver. This hasn't fixed it.
    Also, this may be a related issue: (I guess) around the same time, the beats audio notification that pops up on screen when the volume is changed  has disappeared and doesn't display when the volume has changed.
    In microsoft sound control panel, it has the default speakers and the headphone logo, when i plug in the jack, a green phone circle thing appears by the headphone option, meaning it works i guess. However, the description changes from "ready" to "default communications device" and nothing changes for the regular speaker device.
    When I go to >configure, and test each (L/R) speaker, if the headphones are plugged in, the noise is louder then when they're not plugged it
    But yeah, brand new headphones, brand new laptop, it's mad. What's madder is that the headphones will work for x amount of time, then stop working when I next try to use them...

    bump...

  • Headphones not working - HP Laptop GB, 64-Bit based operating sys. AMD A-6 HD Graphics, 2.7 GHz

    I cannot get my headphones to work.  I made them my default and have tried all the the HP fixes.  Everything say "working properly".  My computer sound works ,but headphones will not work.  I had wireless headphones and they work off and on.  Not working now.  The plug in Sony head phones don't work.  I have tried everything.  I have made them my default and checked  everything that has to do with audio, everything says "woking properly".  I do have a digital display audio that says not plugged in, but that was there when my wireless were working.  This 8.1 ia a real Pain!! Any help would be appreciated!

    Hello sandirose5,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues getting your headset working on your HP G6 Notebook. I am setting out some steps below for you to follow to see if we can get the Audio Troubleshooter to resolve your issue.
    Step 1. Go to start menu and type "Troubleshooting"
    Step 2. Click on Troubleshooting when it shows up
    Step 3. Click on Troubleshoot Audio Playback in Hardware and Sound option
    Step 3. Click Next
    Step 4. Choose Headphones and Windows will automatically detect the problem
    Step 5. Click on Apply Fix
    This should be able to find a resolution to your audio. If you require additional support please re-post. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for

  • Xbox 360 no longer compatible with my Ipod

    I have been using my 4th gen Ipod with my 360 since January of this year...now everytime I pluged it in to my 360 it recognized it by it's name and I could choose any playlist I want with no problem...now from 2 days ago on, my 360 no longer see's th

  • Can't install iTunes 12.1 on Windows 7 64-bit.

    This seems to happen with every fifth or sixth iTunes update, and iTunes is incapacitated until the following update.  In this case, the error message is as follows: An error occurred during the installation of assembly 'Microsoft VC80.CRT .type="win

  • Solution Manager - Logical Component for SAP Netweaver EHP2

    Hello, I installed the newest SAP Netweaver Ehp2 (with usage type AS ABAP only) for a future integrating with BI_CONT (SAP BI requirement). So... what I want to know is... I want to do an update of support packages to the latest Stack (SPS) and in th

  • Photo Does Not Enlarge when you click thumbnail

    I have just installed the update to iWeb, etc. and now have a problem when viewing my web page. I get to the web page and try to click on the picture thumbnail to enlarge it and nothing happens. What gives? iMac G5;2ghz;2gb ram, superdrive   Mac OS X

  • How do I play and then copy DVD movie to mac for film editing

    I have just come home with my new mac book pro.  As recomended by the reseller I have connected an external  slim portable DVD writer/reader so that I can view, ...DVD's.  I am unable to view or copy the file contacts to the mac so that I can then la