Headphone issue after Belle Update

Hi,
After Belle feature pack 1 update on my Nokia 701, I am unable to listen to music or calls using headphone that were supplied with the phone.
1. They were working fine before update.
2. They work fine on Lumia 800.
Pls help.
Thanks.

OK, I succeded to install Angry Birds.
I did these two steps:
1) Reinstall Belle
2) Tried to install Angry Birds but Ovi Store hung
3) Connected the phone in mass archive and searched in E: for any reference to 20030e51. Found a couple of foldes in install and uninstall folders within e:\sys and deleted both.
4) Reinstalled AB and all was fine
Considerations:
a) in a post I read that sometines ovi store hangs on installation of an app and the only way to fix it is either disinstall ovistore (non allowed on my C7) or reinstall phone firnware.
b) reinstall phone fw is a nightmare as it is very long if you need to reinstall all deleted apps and reconfigure the phone.
I suggest to proceed in this way:
Try operation 3) first and then try to reinstall AB. Try at lest a couple of times since also in my case the first time it failed but  the second time it succeded. If in any case it does not work reistall phone fw and then repeate my steps in order to fix the problem.
Let me know if this solve your problem as well.
Cheers,
capraa

Similar Messages

  • Messaging Not Working Fine After Belle Update

    My C7 has issues after Belle update when any incomeing new message in inbox then i read message from the inbox after i read the message then toush the back botton the message is delete in the inbox automaticaly.....i cannot recover this message...!
    plzz  help me to solve this problem.......?

    If the update does not work for you then do as I explained in my previous post and roll back to the previous driver. That philosophy can be applied to all updates.
    If there is no pressing or emergent reason to update and your PC or notebook is running just great... don't update. (that is especially true when it comes to a BIOS update)
    For your issue #2, the problem could be your wireless connection (hotspot, router or modem) that causes the dropped connection.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • X7 headset is not recognized after Belle update

    Hi,
    afters Belle update my original headset is not recognized by Nokia X7, can't listen to music or radio. The icon is not visible.
    Headset is 100% ok, I tried it on different phone and works fine.
    After hard reset is starts working but after unplugged and plugged one again it is still not working. Another hard reset didn't help.
    Also tried accessories settings in settings menu - changing profiles and other setting - didn't help.
    Any ideas?
    Regards

    Same problem here too.
    Updated to Belle and tried to listen to my music using the original nokia x7 headsets and the music plays only from the speakers too. Tried the headsets on my brother's nokia x7 updated to belle too and they worked fine. Others headsets also didnt work in my nokia x7 but they did in my brother's. I tried to reinstall Belle, restore orinigal settings several times and it didn't work.
    Think i just gonna have to sent my phone to the SAT

  • Problem setting up email after Belle update

    Hi, I was having this problem that after Belle update I could not receive emails after set up.
    My email is with eircom.net and phone is with Vodafone Ireland. It is working afet I tried these settings.
    Set your own email address, user name and password.
    Try this settings:
    Incoming server: webmail.eircom.net ( use your own, this in mine with eircom.net)
    access point: internet
    NB: security: OFF
    Port: default
    APOP secure login: OFF
    outgoing server: For vodafone it is mail.vodafone.ie (Ireland)
    Access point: internet
    Security: OFF
    port:default
    Hope these help....

    Problem solved. The ipad default is set to IMAP. When I changed it to a POP server, problem solved.

  • Is there a fix for the wifi connectivity issue after ios6 update?

    Is there a fix for the wifi connectivity issue after ios6 update?
    Cannot connect to any wifi since update to 6.0.1
    How do I get update to 6.0.2?
    Will that even help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Date format Issue after HRSP Update

    Hi,
    We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
    There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
    When we look at the out put after the interface has run for the  vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
    No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
    Any pointers on how to further investigate and resolve the issue will be most helpful.
    Regards

    Hello Iside,
    In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
    To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
    Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
    Link: http://www.blackberry.com/btsc/KB11320
    Please test the date once the software is reloaded prior to restoring the backup.
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

    Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

    Post in the iPad forum, this one is for OSX

  • Exchange 2010 - Issues after rollup update installation.

    Exchange 2010 - Issues after rollup update installation.
    We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
    Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
    An unexpected error occurred and your request couldn't be handled. and
    Your network connection is unavailable. Please reconnect and try again.
    Issue2 - When I open the Exchange Management Shell I get the following error:
    Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
    Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
    hope that it will be fixed after resolving issues 1 and 2.
    We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
    Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
    Please help.
    Thanks.
    Greg

    Hi,
    Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
    "An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
    For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
    Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Internet browser nt wrkg after belle update

    After Belle update on C7 browser is not working & it gets auto closed after 15seconds, eventhough mail, store, social..etc are accessable. Kindly advise anybody to get out this.....

    Hey Pjjibin, Welcome to the Nokia Forums!
    Are you using the native browser or a third party browser?
    Could you please try and delete and re-add the access point for packet data on your device. 
    Also it might be worth checking if you have isntalled the apps "SPB Wireless Monitor Lite" and "SPB Wireless Monitor" may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If this is the case please check the Belle FAQ in Belle Troubleshooting you will find an article to guide you through fixing your phone.
    I hope this helps!
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • Dead N8 after Belle update

    Hello, i updated my N8 to Belle using Nokia Suite few hours ago.
    Half hour ago my phone has switched itself off and can't start it.
    When i press the power button it shows Nokia and after that the loading screen (those 5 white points) for like 30 second with the menu button light turned on and after that it shuts down.
    Thank you for any suggestions in advance.

    Looks like I'm not the only one with the same issue.
    After the update, my N8 is dead. During the update, Nokia Suite show "YOUR PHONE IS RESTARTING...". And, there you go. NOKIA, 5 white dots, the screen goes blank, and now the phone is unusable. I don't know if this was because of the Nokia Suite itself or maybe my phone that having a problem.
    Nokia 3310, 8250, 6070, 6060, 3120, 1110, 1280, 5300 XpressMusic, N76, 6120 classic, 5800 XpressMusic, 5530 XpressMusic, N900, C3-00, N8-00, N9, 700, X2-01, Asha 302, Lumia 610, Lumia 920, Asha 501, Lumia 820 and Lumia 1520...

  • Issues after the update from 2.5.7 to 2.5.16

    A number of issues have cropped up due to / during / after the update of the forums from 2.5.7 to 2.5.16 at the beginning of this week. This is a list of those issues as I have compiled them. It is a work in progress and I will update it when more information becomes available.
    1 Username and email problems for some users. (fixed 2009-12-03)
    Some users have a suffix appended to their username and their email address replaced with a random string (as a consequence email notifications don't work anymore). This problem is being worked on. Time to fix is unknown. Users experiencing this problem are requested to report so in this thread: My user handle and e-mail have been changed without my knowledge Please include your old username, which Adobe ID's you have and whether you used the same email address for those Adobe IDs.
    2 Some user preferences are lost when logging in. (fixed 2009-12-03)
    When you log in to the forums (either manually or automatially based on a "Remember me" cookie), some of your preferences are overwritten by their default values. The most noiceable prference is the settng to display your screen name (real name) that will get reset to displaying a username. This problem is being worked on. Time to fix is unknown.
    3 The Rich Text Editor (RTE) is inserting linebreaks.
    When typing a post the RTE will randomly insert linebreaks.
    Workaround: remove the linebreaks manually.
    4 Raw (FreeMarker?) code is inserted in some posts (through the RTE?).
    In some posts code appears that was not entered by the user. The code looks something like below (but there may be much more then just this one line):
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Workaround: edit the post and remove the code.
    5 The logout button disappeared.
    The logout button is no longer visible.
    Workaround: How can I log out from the forums?
    6 Search is down on one node. (fixed 2009-12-03)
    Search is down on the SGAURWA41P cluster node. This does not show itself as an error, but instead as 0 search results.
    Workaround: restart all browser windows and you may end up on another cluster node or use Google with a "site:forums.adobe.com" search modifier.
    7 Users have 404 problems on first request.
    This is not really a new problem, but it is something that was supposed to be fixed with the update. The problem is caused by the forums inserting a jsessionid parameter in the wrong place in the URL.
    Workaround: reload the page where the incorrect link is located.
    8 Image upload through camera button doesn't always work. (fixed 2009-11-30)
    Some people have reported problems with uploading JPG and PNG images using the camera icon.
    Workaround: attach the images instead.
    Update 2009-11-28:
    A probable cause for the error [The content type of this image is not allowed.] when uploading images through the camera button has been identified. Internet Explorer uploads images using a Content-Type header that differs from the IANA registered type for jpg and png images. As such, the recommended workaround for people wanting to upload images using the camera icon is to use a browser that is not Internet Explorer.

    Re issue 4, "Raw (FreeMarker?) code is inserted in some posts (through the RTE?)", the suggested workaround is:
    Workaround: edit the post and remove the code.
    With my IE 8, the workaround never works.  See this test post for an example:
    http://forums.adobe.com/message/2470219

  • Xperia arc S LT18i - contact issues after ICS update

    I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

    Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Wireless issues after kernel update

    Hi,
    after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
    Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
    the output of iwconfig:
    lo no wireless extensions.
    eth0 IEEE 802.11bg ESSID:"" Nickname:""
    Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
    Bit Rate:54 Mb/s Tx-Power:off
    Retry min limit:7 RTS thr:off Fragment thr:off
    Power Managementmode:All packets received
    Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    eth1 no wireless extensions.
    but if I try to run 'iwlist eth0 scan' it states:
    eth0 Failed to read scan data : Invalid argument
    I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
    As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
    thanks for any inputs,
    tobi

    litemotiv: 'lspci | grep Network' :
    0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    .:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
    at the bottom what's that "wl taints kernel"
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    lib80211_crypt: registered algorithm 'TKIP'
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
    uhci_hcd: USB Universal Host Controller Interface driver
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    ACPI: acpi_idle registered with cpuidle
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    ACPI: Power Button [PBTN]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    ACPI: Sleep Button [SBTN]
    ACPI: AC Adapter [AC] (off-line)
    Monitor-Mwait will be used to enter C-1 state
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    Monitor-Mwait will be used to enter C-2 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1a.2: setting latency timer to 64
    uhci_hcd 0000:00:1a.2: UHCI Host Controller
    uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    wmi: Mapper loaded
    uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    wl: module license 'Mixed/Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    wl 0000:0c:00.0: setting latency timer to 64
    usb 1-5: new high speed USB device using ehci_hcd and address 2
    atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
    atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
    eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
    thermal LNXTHERM:00: registered as thermal_zone0
    and maybe
    lo: Disabled Privacy Extensions
    ADDRCONF(NETDEV_UP): eth1: link is not ready
    start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
    sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
    ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
    eth1: no IPv6 routers present
    tobi

  • [Solved] Overheating/fan/sensors issues after kernel updates

    Hi all,
    I realise there has been a bit of correspondence on this already.  I'm after some advice for my specific situation:
    1. My laptop is an acer aspire 5315.  I has well understood overheating issues that arrise due to BIOS problems
    2. Fan control and temperature reporting worked perfectly with kernel 2.6.30, stopped working with 2.6.31 - I assume due to the well documented changes made in that release.  The temperature only seems to be read once - at boot.  sensors never reports a change after that; if the temperature is cold at boot the fan never get switched on.  Unfortunately this happens most often.
    3. I tried setting the recommended kernel option (can't relocate the post now).  It didn't help :-?
    4. I have tried upgrading the BIOS but the distribution from acer is a windows executable (won't run under freeDOS) and I do not have windows installed on this PC (not game to try under wine).
    5. I re-installed the old kernel from my pacman cache only to find that my wireless no longer works (fan works just fine though).
    I'm now totally stumped :-/
    I'd like to update my bios and go with the latest kernel but can't see a way without installing windows.
    This might be fixed in an ubuntu kernel release (https://bugs.launchpad.net/ubuntu/+sour … bug/453700) but I'd prefer not to do that switch... perhaps the same fix is coming to arch?
    I'd accept having to pin the kernel to an earlier version but neet to get the wireless working.
    help...
    edit: 
    I've now managed to get the kernel backdated correctly (so that wireless works as well as the fan) by re-installing the kernel and firmware together.
    Have configured pacman to igmore future kernel updates
    If anyone has any suggestions on howto update my bios I'd be very greatful.
    Last edited by drandre (2009-11-06 13:26:46)

    Hi,
    Got exactly the same issue, after running for a while laptop justs goes off... going to try to regress kernel until issue is resolved
    BIOS update does sound a bit extreme
    MrG

Maybe you are looking for

  • 80Gb  video output

    I have an 80Gb iPod and have tried to output video. I have used a component video cable that works perfectly with my iPod touch, with no success. I have also tried using a generic 3rd party cable from the earphone output to RCA video, rt/lft. Any sug

  • HT5654 Ipod disabled and I'm unable to restore it. What should I do?

    I'm not able to restore my daughter Ipod 5 after she disabled it. What should i do?

  • Wanted to know in logic chenal strip

    In logic 7 chenal strip how does the order work from top to bottom or botom to top if i place a plugin in the first slot and two more was added how dose logic read which ones first

  • NookStudy Adobe License Exceded

    All, I've been battling with B&N and Adobe on this and both pass the buck off to each other. Everytime I have to send my PC in to get fixed they erase my hard drive. So I have to re-download NookStudy and thus my textbooks. Normaly this works ok but

  • Iphone 6 from France

    Hello, If i buy an iphone 6 from the French apple store can i use it in Bulgaria with a Bulgarian sim card? Thank you in advance!