Headphone Jack Borked - Right Channel Not Working

I have an iPod Classic 120GB which was a Christmas present from my boyfriend, and have looked after it like a small, particularly delicate endangered animal since I got it (this makes the iPod less than 4 months old, if that). Yesterday morning, the headphone jack decided to stop working; sound only goes to the left channel while the right is silent. I originally thought it was a problem with my headphone contacts, but after testing my headphones on my iMac (both channels working) and testing the white Apple earphones on my iPod (left channel only; right channel silent) I am lead to believe that the headphone jack on my iPod is borked. I do not have the receipt for my iPod as it was a gift, but it is less than a few months old, and has sustained no damage other than surface scratches and a few greasy fingermarks (which I wipe off religiously with a dry cloth every evening). It has not been dropped or otherwise manhandled (after my cat, my iMac and iPod are my babies, seriously.) *If I take it to the Apple shop in town, will they fix the headphone jack for me?* I do not have the expertise to open the iPod up and replace the headphone jack myself, nor do I want to void the iPod's warranty just yet (I'm saving the third-party software until the year is up.)
Merci d'avance.

Make a Genius Bar appointment and take it to the Apple Store. They should exchange it with no problem.

Similar Messages

  • Headphone jack no right channel audio

    So recently the right channel audio stopped working for my headphone jack. Any Ideas on how to fix this?

    I found a temporary solution :
    1) Open the registry editor (Windows key + R, then enter "regedit")
    2) Go to this directory :
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0001\Settings\Drv7246_DevType_0892_SS146210c7
    or something that looks like that
    3) Change the settings as following :
    Pin 14 : 02 00 00 00
    Pin 18 : 04 00 00 00
    Pin 19 : 04 00 00 00
    4) Restart
    5) Check if it applied. If it doesn't, try again. Sometimes it doesn't work at the first try.
    It actually remaps the Mic-in jack in a audio output. The sound coming out is a bit lower than the original output but it's still better than the crappy sound I've had since the headphone jack became a piece of .

  • Headphone jack and USB's not working.

    Hi
    I bought a 17.3" Envy 2 months ago. Up until today I have not had to use the headphone jack or either of the USB's on the right hand side of the laptop, however when i've come to use my turtle beaches today, they do not work.
    The USB slots also do not work with my mouse which works on the two slots on the left hand side of the laptop, and my earphones or sennheiser headphones do not work in the jack either. 
    What can you advise? 
    Thanks
    Tom

    Hi @Tom30191 
    Welcome to the HP Support Forums!
    I understand that you are having trouble with some usb ports and your audio jack. I am happy to help with this.
    I would start by refreshing/reinstalling the chipset drivers, for your notebook, and you may also want to try updating the BIOS from the same page, and see if it helps.
    HP ENVY 17-j184na Notebook PC (ENERGY STAR) - Software & Drivers
    Give it a try and let me know if it makes any difference.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Headphone Jack on MacBook Pro Not Working

    Hello,
    The headphone jack on my MacBook Pro is not working properly.
    When I plug in my earbuds or headphones only one side of the headphone or earbud is working and the other side is "muted".
    I am certain the problem are not my earbuds or headphones because I use them with other devices and they work just fine.
    Can someone help me how to fix it?
    Please and thank you much.

    Go step by step and test.
    1.   System Preferences > Sound > Output > Internal Speakers/Headphone
           Settings for the selected device:
           Balance:
           Make sure that the slider is set at middle.
    2.    AudioMIDI Setup
           Applications/Utilities/ Audio MIDI Setup.app
           Audio Devices window
           Side Bar
           Click the Built-in Output.
          Make sure that CH1 and CH2 volume sliders are matched.
    3.   Reset PRAM.  http://support.apple.com/kb/PH14222
    4.   Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Headphone wh-701 right earphone not working

    i recently bought a new nokia n8. And the headphone which comes with my mobile (wh-701) is working good. But recently the right earphone is stop working ... is their any way to repair it or change with nokia care... my mobile is in under warrenty

    Hi JamalJan,
    Welcome to the Nokia discussions board!
    If your headphone is damaged and you was not the cause of this, you should take it back to the retailer and bring a proof of purchase. They can deal with the issue there because it may be that you have a hardware problem.
    Let us know how you get on with this.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Left channel not working--it's a logic problem, but I can't debut it! HELP!!!

    I'm using a SB Audigy SE card on my XP machine. In the past, I've made good music files from CDs and records (remember those?), but I have not used the thing in about 18 months, and now I'm having a weird problem.
    I get output only on the LEFT channel. I'm sure it's not a problem with the input source, because I've used a cassette player and a turntable, and with both, I get output only on the left channel. This happens even when I reverse the phono cables from either device. That tells me the problem is not in the cabling leading from my device to the SB card.
    I checked the speakers using the Audigy Speaker Settings application, and it shows that both speakers are working properly: when I click on CHANNEL, I get the words "left channel" and then "right channel" successively on the proper speakers. Same when I click NOISE.
    This shows me that the problem is not on the (physical) output side: if it were, I would not get the words "left channel" on that channel, and then the words "right channel" on the right channel. As well, I can play videos (e.g. Youtube) and get sound on both channels.
    My guess is that somehow there is some setting somewhere in Audigy that is saying "process only output to the left channel." But I cannot find any setting that might be doing that.
    Anyone got any ideas???? I'm stumped.

    Originally Posted by deafguy999
    OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
    ALSO, CDs play properly--and my speakers are connected only to the sound card.

  • Left rear channel not working - Xfi

    My left rear channel is not working. Its not the speakers nor the connections, its the soundcard (Xfi XM). I know this because I switched the front/rear connections to test them and the same problem?channel did not work. The problem is in both Vista and XP, so its not the software/drivers either. Any solution to this? Thanks.

    Originally Posted by deafguy999
    OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
    ALSO, CDs play properly--and my speakers are connected only to the sound card.

  • Audio sound of loudspeaker and headphone of hp laptop is not working.... pls help me

    audio sound of loudspeaker and headphone of hp laptop is not working.... pls help me

    Hi @manishs400 
    I understand that you are having trouble with the sound on your speakers and headphones.I am happy to help with this.
    Please verify the operating system in use on your notebook. It is possible that it make be a driver related issue. Please seethe following for the HP customized drivers for this notebook.
    HP Pavilion dv4-3145tx Entertainment Notebook PC - Software & Drivers
    Also you should check out these pages, as it is quite possible you can find a resolution.
    No Sound from the Speakers (Windows 8)
    Resolving headphones and headset problems (Windows 8)
    From Microsoft's support website:
    Poor sound quality after upgrading to windows 8.1
    Automatically diagnose and fix Windows audio playback problems
    Let me know if any of that works for you.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • HT1349 MY I PHONE5'S EAR PHONE'S RIGHT SIDE NOT WORKING

    MY IPHONE 5'S EAR PHONE RIGHT SIDE NOT WORKING ND I HAV TRY TO CHANGE MY EAR PHONE AFTER THAT SAME RESULT

    STOP SHOUTING!  It is extremely rude.
    Turn off Mono Audio in Settings > General > Accessibility > Mono Audio.

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

  • Command-Left/Right Arrow not working

    Very strange behavior I'm seeing today.
    My left/right arrow keys work. Even Option-Left/Right works correctly.
    But, Command-Left-Right do not work. No movement at all.
    Curiously, Shift-Command-Left/Right work fine.
    I've not changed any keyboard shortcuts recently. I've checked the keyboard shortcuts that are currently defined. Nothing that would indicate a problem, but clearly there is.

    Just found a solution that worked for me here. Basically, it seems to be a bug with the Dock. If you type "killall Dock" (the command is case-sensitive) into the command line in Terminal, it restarts the Dock. After that the arrows seem to work normally again.

  • Mouse right button not working

    Hai i am shebeer.. i updated my mac os x 10.4.7 to 10.4.11 after updation my right button not working . please help me to solve this problem...

    So far we're just trying to narrow the problem down, so it looks like it's not likely an OS problem, not impossible but not too awful likely.
    Do you have another Mouse to try?
    Can you try this Mouse on another Computer?
    In System Preferences>Mouse & Keyboard, you might try changing the Primary Button to the Right one to see if the Right Button works as a
    Left button, +but the problem+ with that is that I really don't know what you'd do *if you have no Button at all* then!

  • How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
    Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

  • MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N SLi Platinum Duall Channel not work? Please help

    Quote from: iggsy on 29-July-05, 06:03:49
    Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
    Mine does the same thing at the startup screen but not on cpuz...go figure.  Just my 2 cents.   

  • [svn:bz-3.x] 5036: Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS /3.x branch.

    Revision: 5036
    Author: [email protected]
    Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
    Log Message:
    Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-347
    Modified Paths:
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

    Revision: 5036
    Author: [email protected]
    Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
    Log Message:
    Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-347
    Modified Paths:
    blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

Maybe you are looking for