Headphone jack/hookup to stereo problem with existing jack??

Is it just me, or is the jack port different for the iPhone? Went to use it in my boat today where no less than 3 other ipods have been plugged in..... the jack won't go all the way into the hole. The iphone jack requires a skinny little plug to slip past the phone case.
Let me guess... have to buy a special iPhone headphone out to RCA cable?

I noticed the same problem, and bought a Belkin adapter. Unfortunately, the Belkin adapter is long and sticks out of the jack like a huge grey antenna. However, I discovered another solution to the problem from another forum. If you buy an Apple iPod shuffle sport case, it comes with an adapter that deals with this issue. It's more of an extension cord design that was made because the case design prevented headphones from seating all the way into the headphone jack on the shuffle. Here's a link with a pic and further explanation: http://www.penmachine.com/2007/07/this-adapter-from-sport-case-for
The case that includes the adapter costs $29 at the apple store. However, I was able to get one on eBay for $4, including shipping. There seemed to be quite a few available too. Finally, Griffin has created an adapter that looks like the same design, but it isn't available for purchase yet. Unlike the sport case adapter, which comes only in white, Griffin's will be available in black or white.
mini-mac Mac OS X (10.4.9) 8GB iPhone

Similar Messages

My daughters ipod only plays out of one side on her headphones. Is there a problem with the ipod?

My daughters ipod only plays out of one side on her headphones. I've tried other headphones. Is there a problem with her ipod?

First make sure the headphones are plugged in all the way in (it takes a bit of force to get the solid click sound) and sound balance is set in the middle. Second, test the headphones on another device to see if they operate correctly and test the iPod with the original Apple earphones that came with the iPod to see if it works correctly. Lastly, if you are using third-party headphones, make sure that their plug is iPod compatible.

External Speaker Static: Problem with audio jack?

I don't believe that anyone on the forums had the same question.
I am having trouble with my macbook pro. Whenever I plug in external speakers, I get bad static (very loud, about as loud as the speaker's audio itself). I have tested this on multiple speakers and get the same results on all of them. When used on another computer, the speakers work fine. This suggests that it is something wrong with my audio jack for my mac.
I noticed that the 3.5 mm plug doesn't go all the way into the jack. There is about a millimeter millimeter or two of space This isn't much, but may be resulting in the static. I have tried forcing the plug all the way in, but it still does not go in. Any ideas?
I am trying to avoid having to get a bluetooth speaker or anything wireless.

Headphones don't induce grounding problems like external speakers. I am guessing the external speakers were all amplified speakers, with built-in amps and some sort of mains power supply. Perhaps you also have some peripherals such as a display connected to the Macbook Pro.
Try this: disconnect all peripherals from the MBP (including the Magsafe power plug) except the external speakers and see if you get static. I will also guess that the static is more of a whine/buzz that changes whenever the computer does something different.
If this works, then you have a common ground problem. The cheapest way to solve this is a Radio Shack ground loop isolator on the speaker cable,
http://www.radioshack.com/product/index.jsp?productId=2062214
High fidelity versions are also available, more like $300USD.

Problem with hearphone jack

When il put the jack of headphone on the ipod, it doesn't stay at her place. It retreat of the hole. I have my iPod since one year and it's the first time I have this problem. Please help me I don't understand what is the problem.

- Have you troed another pair of earphones?
- If earphones that work in other devices do not work in yours then your have a hardware problem with yur iPOd. The headphne jacks do go bad sometimes..
- Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- A third-party place like this is probably less expensive.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Having problems with audio jacks, connections are shorting. i need an alternative solution for mixing in logic

i am having problems with mac pros audio jacks,any alternative solutions ?

If you're mixing in Logic, buy a FireWire audio interface. So many people make them, that it isn't funny. Personally, I'm a fan of M-Audio interfaces for a cheap, high quality device.
Here's some FireWire interfaces, they also make USB products.
http://m-audio.com/index.php?do=products.family&ID=FWinterfaces

I have problem with the jack, can

i dont know what you call this but i try my best to make you understand.
Recently i have problem with that Zen Micro. I connect the earbud to the micro ( that female connector on the zen micro, whatever name i don'[t know ) so er the sound of my micro is lousy.. i need to turn the male pin a few time in order to ge the right tune.
.So now, it is confrim that my ear bud is fine, tested on my notebook and other devices.
2. It 's obovious the connector on the micro... that is faulty .. either way troublesome.
So question is CAN I RMA ?
Thank

Yes, you need to RMA. Quite a few users have experienced failed headphone sockets.

Airlap 1142 problem with existing wlc2106

Hi There,
i have existing site wlc2106 with 5 APs G standard.I have problem with adding new AP 1142 N to existing configuration.
i attach output from wlc.
Any help appr.
Thanks

First off make sure the WLC and the ap is configured for the same country code. The best output to use is from the console of the ap. Post that output as that will explain why the ap is not joining.
Sent from Cisco Technical Support iPhone App

Problem with Microphone Jack on Advanced Dock with T61p

When I plug a microphone into either the microphone jack on the T61p or on
the advanced dock, I can set the playback volume and use playback functions
as expected. However, when I try to use record functions, only the microphone
jack on the T61p works. I get nothing when the microphone is plugged into
the advanced dock. Is there some setting one must do to get record functions
to work with the advanced dock microphone jack and not just the T61p????

I finally solved this by going back to an older set of SoundMAX drivers found in this thread:
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&message.id=24566&query.id=180...
The older driver solves this problem!
I can't believe Lenovo hasn't fixed this!

Problem with existing script, can't get text of item

I'm taking an earlier script and condensing it so that it will only work from one SELECTED folder. I thought it would be simple but i seam to be running into a few issues
This is the error I get
Result:
error "Can’t get last text item of alias \"Images:2012-2013:WK21:Freedom:Freedom_WK21_PSD:\"." number -1728 from last text item of alias "Images:2012-2013:WK21:Freedom:Freedom_WK21_PSD:"
property type_list : {"8BPS"}
property extension_list : {"psd"}
script o
          property theseNames : {}
end script
-- empty log file
do shell script "echo 'Files not processed in Photoshop :' > ~/Desktop/LogPhotoshopError.txt"
set noError to true
--at the beginning of the script, ask whether to replace or skip existing files? to apply to all?
--use the result for the if file exists?
display dialog "Should I replace or skip exisiting files?" buttons {"Replace", "Skip (Faster)"} default button 2 with icon 1
set skipFiles to (button returned of the result) is "Skip (Faster)"
--Below is what I removed
--set dtF to paragraphs of (do shell script "ls -F ~/Desktop | grep '/' | cut -d'/' -f1")
--set tc to (count dtF)
--repeat with i from 1 to tc
--          set folderName to item i of dtF --<: is the folder name, no need to use text item delimiters -->":"
--          if folderName does not start with "2_" and folderName does not start with "Hot" and folderName does not start with "Press" and folderName does --not start with "Design" and folderName does not start with "Keywords" and folderName does not start with "Season" and folderName does not
--start with "Sue" and folderName does not start with "Design" then
--Setup list of folders and process details of folders
tell application "Finder" to set folderName to (choose folder with prompt "Select Folder")
set {oldTID, my text item delimiters} to {my text item delimiters, "_WK"}
set FolderEndName to last text item of folderName
set brandName to first text item of folderName
set my text item delimiters to "_PSD"
set weekNumber to first text item of FolderEndName
set my text item delimiters to oldTID
set theFolder to ("Hal 9000:Users:matthew:Desktop:" & folderName)
--set up names to destination folders and create locally based on brand name and week number
set this_local_folder to "Images:2012-2013"
set localWeekFolder to my getFolderPath("WK" & weekNumber, this_local_folder)
set localBrandFolder to my getFolderPath(brandName, localWeekFolder)
set localBrandFolder_Low_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", localBrandFolder)
set localBrandFolder_High_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", localBrandFolder)
set localBrandFolder_PSD to my getFolderPath(brandName & "_WK" & weekNumber & "_PSD", localBrandFolder)
set this_Network_folder to "DCKGEN:Brands:Zoom:Brand - Zoom:Upload Photos:2013:"
set networkWeekFolder to my getFolderPath("Week" & weekNumber, this_Network_folder)
set networkBrandFolder_Low_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", networkWeekFolder)
set website_images to "DCKGEN:Website_Images:"
--set up names to destination folders and create over Netwrok for FTP collection (based on a mounted drive)
set this_ftp_folder to "Impulse:"
set ftpWeekFolder to my getFolderPath("Week" & weekNumber, this_ftp_folder)
set ftpBrandFolder to my getFolderPath(brandName, ftpWeekFolder)
set ftpBrandFolder_Low_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", ftpBrandFolder)
set ftpBrandFolder_High_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", ftpBrandFolder)
--taking the folder identify which process it must follow. F R E E D O M   W I T H P N G
if brandName is equal to "Freedom" then
          try
                    tell application "Finder" to set o's theseNames to (name of files of alias theFolder whose file type is in the type_list or name extension is in the extension_list)
          on error
                    set o's theseNames to {} -- no psd files or "8BPS"
          end try
          set numOfNames to (count o's theseNames)
          repeat with j from 1 to numOfNames
                    set thefile to theFolder & ":" & (item j of o's theseNames)
--    F R E E D O M     Folder Photoshop Process W I T H P N G
                    set thisName to (item j of o's theseNames)
                    tell application "Finder"
                              set t_ext to name extension of file thefile
                              if t_ext is not "" then set thisName to text 1 thru -((count t_ext) + 2) of thisName
                              set b to exists file (localBrandFolder_PSD & thisName & ".psd")
                    end tell
                    if not b or (b and not skipFiles) then -- not exists file or file exists and "replace" (continue the rest of the script).
                              tell application "Adobe Photoshop CS5.1"
-- I remove the command activate, Photoshop stay in background
                                        set ruler units of settings to pixel units
                                        try
open (alias thefile) showing dialogs never
                                                  set origName to name of current document
                                                  set myOptions to {class:JPEG save options, quality:12}
                                                  set myPNGOptions to {class:PNG save options, interlaced:false}
                                                  set myPSDOptions to {class:Photoshop save options, embed color profile:true, save layers:true}
                                                  tell current document
--If the quick mask mode has been left on then delete the channel Quick Mask
                                                            if (quick mask mode) then delete channel ¬
                                                                      "Quick Mask"
--If the Layer is incorrectly labeled with Original Layer it needs renaming to original Image
                                                            if (exists layer "Original Layer") then ¬
                                                                      tell layer "Original Layer" to set name to "Original Image"
save in (localBrandFolder_PSD & origName) as Photoshop format with options myPSDOptions without copying
                                                            (delete layer "Original Image") flatten
resize image resolution 300 resample method none
--sharpen image
filter current layer using unsharp mask with options {amount:80, radius:3.2, threshold:0}
save in (ftpBrandFolder_High_Res & name) as JPEG with options myOptions without copying
--Prepare for Low RES by resetting image history
                                                            set current history state to history state 3
delete current layer
merge visible layers
                                                            resize image width 1020
resize image resolution 300 resample method none
filter current layer using unsharp mask with options {amount:80, radius:3.2, threshold:0}
--add save to lowResFolder with same options
save in (networkBrandFolder_Low_Res & name) as PNG with options myPNGOptions without copying
flatten
save in (networkBrandFolder_Low_Res & name) as JPEG with options myOptions without copying
                                                            set newFile to file path
                                                            set newFile2 to newFile as string -- for testing end of name
                                                            if newFile2 ends with "_2.jpg" or newFile2 ends with "_3.jpg" or newFile2 ends with "_4.jpg" or newFile2 ends with "_5.jpg" or newFile2 ends with "_6.jpg" or newFile2 ends with "_7.jpg" or newFile2 ends with "_8.jpg" or newFile2 ends with "_9.jpg" or newFile2 ends with "_10.jpg" or newFile2 ends with "11.jpg" then -- exclude website_images
                                                                      my duplicateFile(newFile, {ftpBrandFolder_Low_Res})
                                                            else
                                                                      save in (website_images & name) as JPEG with options myOptions without copying
                                                            end if
close saving no
                                                  end tell
                                        on error
                                                  set noError to false
                                                  my myLogs(thefile) -- write path to log file in Desktop
                                                  try
close saving no --if exists, close current document
                                                  end try
                                        end try
                              end tell
                    end if
          end repeat
--End F R E E D O M W I T H P N G
end if
if not noError then do shell script "/usr/bin/open ~/Desktop/LogPhotoshopError.txt'"
on myLogs(t)
          try
                    do shell script "echo " & (quoted form of t) & ">> ~/Desktop/LogPhotoshopError.txt'"
          end try
end myLogs
on duplicateFile(tFile, foldersPath) -- tFile is an alias, foldersPath is a list of folder
          tell application "Finder" to repeat with folderPath in foldersPath
                    with timeout of 200 seconds -- adjust it, error if the copy is longer that 200 seconds
duplicate tFile to folder folderPath with replacing
                    end timeout
          end repeat
end duplicateFile
on getFolderPath(tName, folderPath)
          tell application "Finder" to tell folder folderPath
                    if not (exists folder tName) then
                              return (make new folder at it with properties {name:tName}) as string
                    else
                              return (folder tName) as string
                    end if
          end tell
end getFolderPath
tell application "Finder"
          open "Hal 9000:Users:matthew:Desktop:LogPhotoshopError.txt"
end tell

I'm getting close or at least I hope this is how it looks now, but appears not pick up the files in the folder?
The result
          exists folder "Freedom_WK20_HR" of folder "impulse:Week20:Freedom:"
          get folder "Freedom_WK20_HR" of folder "impulse:Week20:Freedom:"
          get name of every file of alias (alias "Images:2012-2013:WK20:Freedom:Freedom_WK20_PSD:") whose {"8BPS"} contains file type or {"psd"} contains name extension
          open "Hal 9000:Users:matthew:Desktop:LogPhotoshopError.txt"
end tell
--------------------MAIN SCRIPT BELOW__------------------
property type_list : {"8BPS"}
property extension_list : {"psd"}
script o
          property theseNames : {}
end script
-- empty log file
do shell script "echo 'Files not processed in Photoshop :' > ~/Desktop/LogPhotoshopError.txt"
set noError to true
--at the beginning of the script, ask whether to replace or skip existing files? to apply to all?
--use the result for the if file exists?
display dialog "Should I replace or skip exisiting files?" buttons {"Replace", "Skip (Faster)"} default button 2 with icon 1
set skipFiles to (button returned of the result) is "Skip (Faster)"
--Setup list of folders and process details of folders
tell application "Finder"
          set theFolder to (choose folder with prompt "Select Folder")
          set folderName to name of theFolder
          set {oldTID, my text item delimiters} to {my text item delimiters, "_WK"}
          set FolderEndName to last text item of folderName
          set brandName to first text item of folderName
          set my text item delimiters to "_PSD"
          set weekNumber to first text item of FolderEndName
          set my text item delimiters to oldTID
--set up names to destination folders and create locally based on brand name and week number
          set this_local_folder to "Images:2012-2013"
          set localWeekFolder to my getFolderPath("WK" & weekNumber, this_local_folder)
          set localBrandFolder to my getFolderPath(brandName, localWeekFolder)
          set localBrandFolder_PSD to my getFolderPath(brandName & "_WK" & weekNumber & "_PSD", localBrandFolder)
          set this_Network_folder to "DCKGEN:Brands:Zoom:Brand - Zoom:Upload Photos:2013:"
          set networkWeekFolder to my getFolderPath("Week" & weekNumber, this_Network_folder)
          set networkBrandFolder_Low_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", networkWeekFolder)
          set website_images to "DCKGEN:Website_Images:"
--set up names to destination folders and create over Netwrok for FTP collection (based on a mounted drive)
          set this_ftp_folder to "Impulse:"
          set ftpWeekFolder to my getFolderPath("Week" & weekNumber, this_ftp_folder)
          set ftpBrandFolder to my getFolderPath(brandName, ftpWeekFolder)
          set ftpBrandFolder_Low_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", ftpBrandFolder)
          set ftpBrandFolder_High_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", ftpBrandFolder)
--taking the folder identify which process it must follow.
          if brandName is equal to "BHS" then
                    try
                              tell application "Finder" to set o's theseNames to (name of files of alias theFolder whose file type is in the type_list or name extension is in the extension_list)
                    on error
                              set o's theseNames to {} -- no psd files or "8BPS"
                    end try
                    set numOfNames to (count o's theseNames)
                    repeat with j from 1 to numOfNames
                              set thefile to theFolder & ":" & (item j of o's theseNames)
--    B H S    Folder Photoshop Process
                              set thisName to (item j of o's theseNames)
                              tell application "Finder"
                                        set t_ext to name extension of file thefile
                                        if t_ext is not "" then set thisName to text 1 thru -((count t_ext) + 2) of thisName
                                        set b to exists file (localBrandFolder_PSD & thisName & ".psd")
                              end tell
                              if not b or (b and not skipFiles) then -- not exists file or file exists and "replace" (continue the rest of the script).
                                        tell application "Adobe Photoshop CS5.1"
-- I remove the command activate, Photoshop stay in background
                                                  set ruler units of settings to pixel units
                                                  try
open (alias thefile) showing dialogs never
                                                            set origName to name of current document
                                                            set myOptions to {class:JPEG save options, quality:12}
                                                            set myPSDOptions to {class:Photoshop save options, embed color profile:true, save layers:true}
                                                            tell current document
--If the quick mask mode has been left on then delete the channel Quick Mask
                                                                      if (quick mask mode) then delete channel ¬
                                                                                "Quick Mask"
--If the Layer is incorrectly labeled with Original Layer it needs renaming to original Image
                                                                      if (exists layer "Original Layer") then ¬
                                                                                tell layer "Original Layer" to set name to "Original Image"
save in (localBrandFolder_PSD & origName) as Photoshop format with options myPSDOptions without copying
                                                                      (delete layer "Original Image") flatten
resize image resolution 300 resample method none
--sharpen image
filter current layer using unsharp mask with options {amount:80, radius:3.2, threshold:0}
save in (ftpBrandFolder_High_Res & name) as JPEG with options myOptions without copying
--Prepare for Low RES by resetting image history
                                                                      set current history state to history state 3
                                                                      flatten
                                                                      resize image width 1348
resize image resolution 300 resample method none
filter current layer using unsharp mask with options {amount:80, radius:3.2, threshold:0}
--add save to lowResFolder with same options
save in (networkBrandFolder_Low_Res & name) as JPEG with options myOptions without copying
                                                                      set newFile to file path
                                                                      set newFile2 to newFile as string -- for testing end of name
                                                                      if newFile2 ends with "_2.jpg" or newFile2 ends with "_3.jpg" or newFile2 ends with "_4.jpg" or newFile2 ends with "_5.jpg" or newFile2 ends with "_6.jpg" or newFile2 ends with "_7.jpg" or newFile2 ends with "_8.jpg" or newFile2 ends with "_9.jpg" or newFile2 ends with "_10.jpg" or newFile2 ends with "11.jpg" then -- exclude website_images
                                                                                my duplicateFile(newFile, {ftpBrandFolder_Low_Res})
                                                                      else
                                                                                my duplicateFile(newFile, {ftpBrandFolder_Low_Res, website_images})
                                                                      end if
close saving no
                                                            end tell
                                                  on error
                                                            set noError to false
                                                            my myLogs(thefile) -- write path to log file in Desktop
                                                            try
close saving no --if exists, close current document
                                                            end try
                                                  end try
                                        end tell
                              end if
                    end repeat
--End BHS
--taking the folder identify which process it must follow. B U R T O N
          else if brandName is equal to "Burton" then
                    try
                              tell application "Finder" to set o's theseNames to (name of files of alias theFolder whose file type is in the type_list or name extension is in the extension_list)
                    on error
                              set o's theseNames to {} -- no psd files or "8BPS"
                    end try
                    set numOfNames to (count o's theseNames)
                    repeat with j from 1 to numOfNames
                              set thefile to theFolder & ":" & (item j of o's theseNames)
--    B U R T O N    Folder Photoshop Process
                              set thisName to (item j of o's theseNames)
                              tell application "Finder"
                                        set t_ext to name extension of file thefile
                                        if t_ext is not "" then set thisName to text 1 thru -((count t_ext) + 2) of thisName
                                        set b to exists file (localBrandFolder_PSD & thisName & ".psd")
                              end tell
                              if not b or (b and not skipFiles) then -- not exists file or file exists and "replace" (continue the rest of the script).
                                        tell application "Adobe Photoshop CS5.1"
-- I remove the command activate, Photoshop stay in background
                                                  set ruler units of settings to pixel units
                                                  try
open (alias thefile) showing dialogs never
                                                            set origName to name of current document
                                                            set myOptions to {class:JPEG save options, quality:12}
                                                            set myPSDOptions to {class:Photoshop save options, embed color profile:true, save layers:true}
                                                            tell current document
--If the quick mask mode has been left on then delete the channel Quick Mask
                                                                      if (quick mask mode) then delete channel ¬
                                                                                "Quick Mask"
--If the Layer is incorrectly labeled with Original Layer it needs renaming to original Image
                                                                      if (exists layer "Original Layer") then ¬
                                                                                tell layer "Original Layer" to set name to "Original Image"
save in (localBrandFolder_PSD & origName) as Photoshop format with options myPSDOptions without copying
                                                                      (delete layer "Original Image") flatten
resize image resolution 300 resample method none
--sharpen image
filter current layer using unsharp mask with options {amount:80, radius:3.2, threshold:0}
save in (ftpBrandFolder_High_Res & name) as JPEG with options myOptions without copying
--Prepare for Low RES by resetting image history
                                                                      set current history state to history state 3
                                                                      flatten
                                                                      resize image width 1020
resize image resolution 300 resample method none
filter current layer using unsharp mask with options {amount:80, radius:3.2, threshold:0}
--add save to lowResFolder with same options
save in (networkBrandFolder_Low_Res & name) as JPEG with options myOptions without copying
                                                                      set newFile to file path
                                                                      set newFile2 to newFile as string -- for testing end of name
                                                                      if newFile2 ends with "_2.jpg" or newFile2 ends with "_3.jpg" or newFile2 ends with "_4.jpg" or newFile2 ends with "_5.jpg" or newFile2 ends with "_6.jpg" or newFile2 ends with "_7.jpg" or newFile2 ends with "_8.jpg" or newFile2 ends with "_9.jpg" or newFile2 ends with "_10.jpg" or newFile2 ends with "11.jpg" then -- exclude website_images
                                                                                my duplicateFile(newFile, {ftpBrandFolder_Low_Res})
                                                                      else
                                                                                my duplicateFile(newFile, {ftpBrandFolder_Low_Res, website_images})
                                                                      end if
close saving no
                                                            end tell
                                                  on error
                                                            set noError to

Problems with existing stock and batch management indicator

Hi,
We would like to set the batch management indicator for a material.
However, there is stock on the material for the given plant.
The different stock categories for the plant/material combination are as follows (according to transaction MMBE):
Unrestricted use 150
Reserved (for production ordeers) 42
Open order qty (incoming PO) 100
"When I try to set the batch management indicator in MM02 I receive the following error message:
Material Master Maintenance
The batch management requirement cannot
be changed for the following reasons:
Stocks already exist at plant level.
Plant SLoc
   PL01 SL01
   PL01 SL02"
Can someone please guide me in how to remove the stock and the reservations, so that we can set the batch management indicator? Does the reservations of stock have any impact (there are reservations for 5 different production orders for this material)?
Thanks in advance,
Lars

in plant A, you have to add 21 in current period (e.g. with 202 movement), then you issue 171 in previous period. with 201. Result: both periods are zero.
plant B, just issue 17 in previous period with 201.
for Plant A   171 with movement 202 back into stock with previous period date, and subsequently 21 goods issue using 201 in current period.
for plant B: 17 with movement 202 and previous period date.

Problem with ethernet jack, works fine wirelessley

I just moved into a new place that has ethernet jacks in each room. I happened to have one right behind the tv stand where the Apple TV is. If I plug the Apple TV into the ethernet jack it disappears out of iTunes.
If I unplug it and it uses the wireless AEBS Extreme network all works well as far as connecting, but since my place has metal studs the wireless connection has a little too much noise for the best connection, that's why I thought the ethernet jack would be better.
I know the ethernet jack works fine, I tested it with my MacBook Pro and it works perfectly fine with the ethernet jack.
Any suggestions on how to use the ethernet jack and keep Apple TV displayed as a device in iTunes?

Sounds like you have determined the ethernet jack is physically good.
Are you using fixed IP addresses or DHCP? If you don't use DHCP you may have to enter your IP address, subnet mask, router, and DNS addresses via the settings of AppleTV..
hth,
b.

Problem with audio jack iPad 4

Yo, i'm from México, last year (March 4 2013) My mom gave me an iPad 4 has a birthday present from march to august anything was cool.
But on august i was on the school and i just unplugged my headphones, then 1 hour later i plugged them and only one headphone was working, i told to a friend of mine if i can test them on his phone and they were working, then i tried plugging any ear/headphones in my iPad 4 and still just working Left one.
What do i do? i tried looking for the jack here on mexico and it's just unavailable, just for iPad 3.
There's any solution?
Thanks for reading.

Make sure you are plugging them in all the way.
If you have a case, make sure the case is not blocking the port.
Inspect the port, make sure it is free of lint or any debris.
Try getting some compressed air and blowing out the port.

ITunes problems with existing Music Library

Can someone please advise why since downloading the latest iTunes SW I now have 83 songs (at least two of these songs were purchased directly from the Apple on-line store) in my PC Music Library that cannot be ported to my iPOD.
I have tried to Authorise my PC with the Apple Server at least a dozen times now and each time it say's it OK yet I still have the problem highlighted above.
I am getting so annoyed that Apple can stop me listening to MY OWN music that I am toying with idea of dummping my iPOD and moving to a more Customer friendly MP3 device.
Rgds, John...

I actually had about 5 on my Mac do the same - also purchased software from the Apple Store.
I managed to get them recognized properly by deleting them from the iTunes library (but not trashing the files) and then re-importing them in to iTunes, it seems to be related to the update process when 7.1 first loads.

Problem with earphone jack.

Hi Team,
Since yesterday evening I am not able pair to my earphones with my phone.
every time I have to restart my phone , also whenever it's get connected sound is comes in only right ear plug. I tought that it might be head set issue , so tried another one and same problem persist.
please any one can suggest what needs to be done.

Stop by your local Sony Xperia Care center
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Problems with sound jack

When I plug in my external speakers the sound continues to play through my mac instead. Why? Can I fix this or do I need to take it to a shop?

re update
I found the little check mark that enables to hear both front and rear audio.. so that is set
only problem left is stereo sound. when i click right audio output i get no sound, when i click the left audio output i get sound in both sides.. anyone?

Headphone jack/hookup to stereo problem with existing jack??

Similar Messages

Maybe you are looking for