Headphone jack no sound

my toshiba p305d-8995e is not giving me sound when i plug in my headphoens the speakers work fine but when i plug in headphones it doesnt switch over. the headphones work fine because i use them with my music player. why is this not working? Thanks

Satellite P305D-S8995E
The driver is here. Won't hurt to reinstall it.
Conexant Audio Driver for Windows Vista (64bit)
Open Sounds in Control Panel. What do you find on the Playback tab?
-Jerry

Similar Messages

Headphone tip stuck in headphone jack no sound comes out or goes in, what should i do?

i just got my macbook pro unibody, and first time i insert headphone in the jack the little piece of the head phone gets stuck in the jack. what should i do ? Does the warranty cover that kind of stuff( cause i think they should) or is there a solution? anything, please help!!

I had the same problem. I tried tweezers, glue and neither worked. If you can, bring it into the Apple Store.
Otherwise, a cheap fix so you can use headphones/earbuds:
I bought a USB to headphone jack adapter and it worked well. This is the one I got:
Syba SD-CM-UAUD USB Stereo Audio Adapter
http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o01_s00_i00?ie=UTF8&p sc=1
I'm sure many other similar adapters would work too.
It didn't require any device drivers, it was plug and play.
Once you plug it in, go to System Preferences, Sound, and click the Output tab at the top of the dialog box. Then select: C-media USB audio device
Your headphones should work now, but I think your internal speakers will remain inaccessible until you get your MacBook repaired.

Headphone Jack no sound when plugged in ?

music plays fine , when i plug in the jack the music stops (as normal) but no sound from headphones/jack ? pleas help thanks....

emeres wrote: Do you look for something like this?
I am not sure. I had a look at the code (I dont know Perl, though), and it seems that, in the end, all it does is issuing
pacmd set-default-sink x
However, when I do this manually, it doesnt switch the sound to the other sink.
emeres wrote: I would check if udev recognizes that headphones are plugged in/out (udevadm monitor), create a rule and a script setting the default output via pacmd. Or create a systemd service, or your own script periodically checking the status.
Unfortunately, udev does not seem to detect plugging in or out
(udev monitor doesnt output anything when I plug headphones in or out).
However, I can see the change in pacmd list-sinks as described above.
When I set pulse log level to debug, I also get some output from there, indicating that it gets recognized:
D: [pulseaudio] module-alsa-card.c: Jack 'Front Headphone Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status no
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-headphones
D: [pulseaudio] module-alsa-card.c: Jack 'Front Headphone Jack' is now plugged in
D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status yes
D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-headphones

T420 headphone jack no sound

New problem here.
1. recently updated all drivers and such through lenovo updates and drivers after replacing laptop screen.
now headphone jack no longer works. could be just coincidence. Sound continues to port through speakers, and I can't find any diagnostic to help me see if the audio card "sees" the headphones.
yes, the headphones have been tested elsewhere.
your suggestions appreciated.

It depends since the jack is usually 4 pin (for sound and mic). Its possible that the connections don't line up correctly. Try some other head phone or 3.5mm stereo device. If you've used it before and it worked with it maybe something is in there or its damaged. Its not possible to trouble should those possibilities.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Windows 7 x64 - headphone jack no sound

has anyone gotten the sound to work out of the headphone jack?
i got audio and microphone working by installing the latest Cirrus Logic driver - CS4206A (AB99), i think it's the latest, i got it from Cirrus website and it's the last one on the list, i assume "99" is the latest since it's the highest numbered.
the drivers on 3.0 and 3.1 update don't work.
this isn't on my machine, but a friend's late 2009 white macbook. thanks.

same here no sound in windows 7 And linux
Message was edited by: Revenage

Greetings Community: I have a problem with my headphone jack: no sound. The problem is not with the headphones... the jack just does not transmit any sound... any ideas how to fix this? It seems to be a rather strange problem. Thanks for your help.

Any ideas on how to fix a problem with a headphone jack on my
desktop power Mac (mid 2007). I don't have a clue on this one.
Paul

Hi Paul,
...on my desktop power Mac (mid 2007)
Are you sure you don't have a Mac Pro? The last of the PowerMac desktops were discontinued in August 2006.
What does "About this Mac" (in the Apple menu) say about the processor type?

Headphone Jack - No Sound after unplugging

Hi I have a weird problem. If my kids plug headphones in and then unplug them I have no sound from the internal speakers. I have to plug the heaphones in and pull them back out 2 times to get the internal speakers working again. It is a new 20" iMAC.

Hello cmdrunix
There is a micro switch built into the jack that tells the audio system to go from internal to external. At some point in time it may and probably will completely fail, the only solution is to take it in for service.
Dennis

Macbook Headphone Jack no sound out but mic works problem Mavericks

Hi,
I currently was plugging my macbook Pro to a amplifier to listed music louder, It never worked. After that i Puted a Headphone and worked and unpluged it and plug the headphone again and it did not work anymore. But if i put my blackberry headphones the mic works perfect and on system preferences it says Headphone Port so the mb pro recognizes the headphone but is not able to exit the sound to the headphones. I formated the macbook pro but the problem persists. I'm trying to find a software solution because in my country Venezuela there is no apple store or Certified Tech Service so I'm on my own on this.
Hope you can help.
Thanks in Advance.

I changed them on varius settings and nothign happened. Any other ideas? Thanks

HP Pavilion dm4-2070us Sound stop when put the headphone jack

Hi
When I remove or put the headphones jack, the sound stops to work in the speakers and in the headphones. To turn it back, I have to close the player(music, video or sound streamer from the web site) and start it again, but if the headphones is pluged in it works very well, if I remove the jack stop again, it happens in reverse case.
Could you please tell me the solution for this problem?
Notebook info
IDT High Definition Audio CODEC
Genuine Windows 7 Home Premium 64-Bit SP1
Intel(R) Core(TM) i5-2410M
6GB system memory
Thanks
Roberto
This question was solved.
View Solution.

I had the same problem with dm4-2070us and I just finished chatting with HP customer service. The representative asked me to do few things including setting the BIOS to default. I also reinstalled the driver. NOTHING WROKED.
He told me to do a complete revovery of the system to factory reset. I didn't want to go that route.
What I did is downloaded the older driver for dm4-1162us and installed on my dm4-2070 and it fixed the problem. Now the only thing I'm missing is the Dolby sound, about which I don't care that much.
Hope this help you also.
Conclusion: It's a software problem. May HP come uo with a new driver to fix it, SOON.
Thanks.

When useing av cable to a projector, I want the sound to come out headphone jack.

I am using the av cable to connect the video out to a projector and the headphone jack to speackers.
If I unplug the av cable the headphone jack provides sound to speakers and I have volume slider under the play button.
When I plug in the av cable the volume slider under the play button goes away and the projector works.
I have been able to make them work befor together.
PLEASE HELP.

Think when you connect by hdmi you mute the headset like you mute the soeaker if you use the headset

Headphone Jack Not Working Macbook Pro Mid 2012 Running Yosemite

Hey everyone,
I have a Mid 2012 MBP. Just updated to OS X 10.10 and used the headphone jack to connect my external speakers for the first time today. Had no problems t first, but after about 2 hours of using the headphone jack the sound started cutting in and out then about 10 minutes later, they just stopped working all together. Audio works just fine with out them plugged in. Also the sound is cutting in and out using the built in speakers also.
I have Bootcamp(windows 8.1) and I have the same problem when using Windows also. Sounds like a hardware problem but im hopping its not cuz I dont have the warranty anymore(obviously).
Anyone have any ideas?

Reset the PRAM:
http://support.apple.com/kb/PH14222?viewlocale=en_US
When it is not working, look inside the audio output port. See if there is a red light. If so, the internal switch is stuck and the jack may free it if inserted a few times.
If none of the above solves the problem, make an appointment at an Apple store genius bar. The evaluation will be FREE.
Ciao.

Internal speakers suddenly will not unmute. My headphones work, and there is a red light coming from the headphone jack

I put my volume on mute a few weeks ago, and I don't know if I have used it again since then or not, but now the volume will not unmute. There is a red light glowing out of the headphone jack. Sound through headphones works. I've tried updating and restarting my computer. Help?

No, not forceful - gentle.
A PRAM-reset might also help:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Try this a few times.
Stefan

Headphone jack not working iMac 10.5.8

While playing to the headphones the plug was pulled out of the headphone jack.
Sound plays through the external speakers but when the headphones are plugged in they are not recognized.
Tried a different pair of headphones and they did not work.
Both sets of headphones do work on another computer.
Reset the PRAM but still no recognition of headphones.
Plugged headphones in and opened the sound preferences.
The only choice is internal speakers and there is not a place to change the setting to audio output.
Restarted the machine with the headphones plugged in but still no recognition.
Any other ideas before I decide it's just a bad jack?

Sounds like the headphone port is damaged. Some USB audio solutions exist for the Mac. You may want to research those over trying to fix the soundboard.

Headphone jack wont work normally

There is something wrong with my headphone jack. the sound skips in and out in even increments when im using headphones but through the normal speakers sound is fine. theres nothing wrong with my headphones. does anybody know what is wrong with it?

It may be dirty ...try blowing into the jack or better yet use a form of compressed air for electronic equipment. You could also try wetting the tip of your headphone jack with WD-40 (or a similar electronic contact cleaner) then wiggling that around to see if things clear up.

Macbook Pro Headphone Jack, a very strange thing going on with it? help

Hello,
My Macbook Pro 15" Mid 2011 has had this very annoying small issue for over a year with the headphone jack. Sound only plays through the headphone jack as per normal when i restart the laptop, but once i remove the headphones and plug them back in sound isn't going through the headphone, it's going through the speakers as if headphones aren't plugged in, to have it working as normal i have to restart the laptop again.
Is this a hardware or software issue?
Please help me resolve this..
Thanks,
Jacob

Welcome to Apple Discussions!
Since this is a brand new MBP under warranty, the best thing to do is to contact Apple and tell them about your difficulties. If you have access to an Apple Store, you might want to bring your Mac in and show them what it is doing. This does not sound at all normal, and it's very possible that you have hardware issues involved. If so, you should be eligible for a repair under warranty or possibly even a replacement if you are still in the first 2 weeks of ownership.
There is a long thread which may be relevant:
http://discussions.apple.com/thread.jspa?messageID=12542170
It's probably too long to read the whole thing, but you might browse the posted images and see if this looks like your problem.
Good luck!

Headphone jack no sound

Similar Messages

Maybe you are looking for