Headphone jack

Hey. I've had my iPod touch fourth generation for almost two years now and I recently dropped it on the ground getting out from my car. The screen is a little cracked, but now my headphones don't fit into the jack all the way. I've tried multiple headphones but they all won't work. Does apple cover this sort of thing? Do I have to get a new one??

Apple will exchange your 4G iPod for a refurbished one for $199 for the 64 GB one and $99 for the others. They do not fix yours.
Apple - iPod Repair price

Similar Messages

ITunes no longer keeps speakers running on headphone jack

iTunes no longer keeps my external speakers running when connected by audio cable to the headphones jack. After 1:45 min:sec, my Logitech Pure-Fi Anywhere 2 speakers power down when connected to my computer playing iTunes.
The speakers do not power down for audio generated from other sources on my computer. When I play a video or audio file through Safari or another browser, the speakers work fine. When I listen to an audio file by selecting it in the Finder using Apple-Y ("quick-view"), the speakers run continuously until the end of the track without powering down. When I use the speakers configured the same way with other software (such as Skype), they work fine.
The speakers do not power down for audio generated from other DEVICES. When I plug the speaker cable into the headphone jack of either my iPhone 3Gs or my partner's mp3 player and play audio, the speakers work continuously.
I've looked at trouble-shooting for iTunes and found nothing on the Apple site or the web or in the iTunes preferences to keeping wire external speakers live during iTunes playback. I've tried having the speakers connected to a power source or running on batteries but the problem is the same. I've reset the speaker device with no change. I've reinstalled iTunes, no change. The Apple Store genius bar cleared all caches and restarted, no change. They reinstalled the computer system, but found no change.

Hi Dexterdawg
Can you direct me to the thread as I can not sort out the same problem on my iMac
Thanks

Headphone Jack No Longer Works

Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no longer works so I can't use it in my car or at other times.

Ok I just talked to headroom and with this adapter you can go directly to a set of headphones or to one of their amps. Additionally the pin connector provides improved sound quality over the cheap headphone jack that comes stock on the ipod.
http://tinyurl.com/272myv

IPhone 4 headphone jack not working right.

So the headphone jack in my iPhone 4 i don't think is working properly. The right headphone does not put as much sound out as the left. I'm not sure why it was working perfectly just yesterday. I haven't dropped it or got water in it or anything. I tried plugging it in and unplugging it a few times, i reset my phone, turned it off then on and nothing seems to be working. Its not on silent and the volume thing is centered. Idk what could e happening. Help!!!

I would test the headset in another device such as a computer
and test another 3.5mm minijack headset in the phone to tell if it's the phone or headset

How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
all i have is the internal mic option, can anyone help?
thanks

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Is there a way to disable the headphone jack?

A few months ago my macbook pro 2012 (non retina) fell and the headphone jack was destroyed in the process, and the sound on my internal speakers no longer work. The apple genius said that the only way to get my headphones and speakers working again would be to replace the logic board. What I'm wondering is if there's a command to type into the terminal that would just bypass the headphone jack entirely so that I could at least get sound through my speakers. Like I said, there's no hope of saving my headphone jack so I don't need advice about how to re-enable it. I'm hoping for a command for terminal to disable the headphone jack so that I can hear sound through my internal speakers. Help?

Well you have to take a break, sleep, etc sometime! The repair may take just a few minutes.
Your other option would be search on the Fixit website and YouTube's "how to tutorials."

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

How to make my computer send all the audio through optical audio cable instead of headphone jack?

Howdy,
To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
Thanks in advance!
My desktop is:
ENVY h8xt,
• Windows 8 64
• 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
• 12GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB 7200 rpm SATA hard drive
• No secondary hard drive
• 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
• 300W Power supply
• SuperMulti DVD Burner
• Wireless-N LAN card (1x1)
• 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
• No Additional Office Software
• No additional Security Software
• No TV Tuner
• Beats Audio (tm) -- integrated studio quality sound
• HP USB volume control keyboard and mouse with Win 8 keyboard
• Adobe Premiere Elements & Photoshop Elements 10
And the laptop:
HP ENVY 15t Quad
• Windows 8.1 64
• 4th generation Intel(R) Core(TM) i7-4700MQ Processor
• NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
• 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
• 8GB DDR3 System Memory (1 Dimm)
• 1TB 5400 rpm Hard Drive
• 24GB flash Hard Drive Acceleration Cache
• No Additional Office Software
• Security Software Trial
• 6-Cell Lithium-Ion Battery
• No Internal DVD or CD Drive
• Standard Keyboard
• HP TrueVision HD Webcam w/ integrated digital mic
• 802.11 AC WLAN and Bluetooth(R) [2x2]
This question was solved.
View Solution.

Hello @_goma,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
To configure your desktop to enable the optical audio cable, I recommend following the steps below:
Step 1. Click the Windows Key Button on your desktop
Step 2. Type "Control Panel"
Step 3. Select "Control Panel" in the top right-hand corner
Step 4. Select Sound
Step 5. Under the Playback tab, right-click the white area below the devices available
Step 6. Select "Show Disabled" and "Show Disconnected Devices"
Step 7. Connect your Optical Audio Cable
Step 8. Select your Optical Audio Cable as the default device and click "Enable"
Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Video out from the headphone jack died... 30gb 5g

Hi all.
So, I have a 30gb 5g ipod. I have played video out of the headphone jack to a tv for years now. I have the apple version of the video out cable. So, recently, the video stopped playing. The audio plays. YES, it is set to tv out = on, NTSC. This worked fine. Now no video. Video DOES play on the ipod itself. And, I bought an expensive dock cable that has composite out and that does work for video. So, I am just wondering what happened to my video from the headphone jack. I guess I could try to get it fixed, but is it worth it? Any ideas would be appriciated! Thanks!!

OK, I was DETERMINED to figure this one out...simply because it USED to work...
Somehow (last 'update' I assume)...my 'TV out' was turned off.
On my 80GB model, it was under menu > videos > video settings > TV Out
I just turned it 'on' and I was back in business...of course it doesn't make up for last weekend, when I was out of town trying to get the darn thing to work...but at least it works now.
Hope this helps.

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

All headphones give distorted, crackly sound. Sometimes no sound. Headphone jack broken? Apple expresslane support giving a "generic error" message whenever I try to send in for service...

As in the title. For a while the headphone jack is occasionally crackly when the jack moves around in the port. It finally died today when I plugged it in and all the audio is heavily distorted and sometimes cuts out completely. Whenever I try to set up a service with Apple I keep getting this error message:
We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
I can't get through to the Irish support phone number either, it keeps saying number not recognised. Is there any other way I can send my iphone in for service (closest genius bar is 500km away...)

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

HT201205 How can I connect to a bluetooth devise and use the head phones at the same time? I have a new ipod Touch (32GB)'and want to play through a stereo system using the headphone jack and connect to a blue tooth speaker in another room

How can I

Not possible, there is a physical switch inside the headphone port, when the headphone jack is plugged in the switch is open and disables the iPod speaker and Bluetooth networks. Cheers.

TS4113 Is there a terminal or other type of workaround to allow sound to come from the HDMI and headphone jack at the same time?

I have a late 2012 Mini, running 10.8.2. I have a set of powered speakers plugged into the headphone jack. My TV is running on a direct HDMI connection. I can only stream sound through HDMI, or even select it as an output, if I unplug my headphone speaker plug. Apple's knowlege base says this is the case. I am looking for a way to have both plugged in all the time, and have the sound mirrored to both.
I use the speakers for itunes music, system sounds, skype, etc.. The HDMI sound is for steaming content to the TV. I don't want to have to reach around behind the computer and unplug/plug each time I switch, for a multitude of reasons. Any ideas out there? Google wasn't getting me very far. Maybe a terminal solution of some sort? Thanks in advance.

it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

How can I use the headphone jack as an audio input?

I have a new macbook pro 13". I want to use the headphone jack as an audio in device, but I do not have the option in sound preferences to choose it as an option for audio in.
HELP!!
Thanks.

alex_on_beats wrote:
…Anyway, why?
Ask Apple - we're only users here.
Griffin iMic is the usual solution to such problems; http://store.griffintechnology.com/desktop/imic
By all means send feedback and let them know how t'd off you are; http://www.apple.com/feedback/macosx.html

Headphone jack

Similar Messages

Maybe you are looking for