Headphone pause / play / FF button doesn't work on iphone 3g

I cant get the button on my headphones to work. I have tried other headphones but this still doesnt help. Is there a setting for this button?

I have the same problem here.
I have an Iphone 16Gb firm 1.1.3 , my headphones button (start/stop - skip) works ONLY if i leave the headphone's jack plugged in the phone in STANDBY mode.
In other words : Iphone in standby mode - plug the headphones - wake button - slide unlock ... everything perfect hedphones button works correctly.
On the contrary if : Iphone in standby mode - wake button - slide unlock - and THEN plug the hadphones ... the headphone's button doesn't work !!!
I don't make any restore also because i'm not sure that it can fix the problem and i don't want to loose all my notes - sms etc.
I will do only if i will be sure that restore can fix this annoying issue.
Thank you very much for any suggestion !
Tillo
N.B. Sorry for my bad english,but is not my natural language !

Similar Messages

  • Standby button doesn´t work on iphone 5.

    since 2 days the standby button doesn´t work. after pressing several times, sometimes it will work.
    what can i do? my iphone is from 09/2012.

    This is a common problem, the on/off button and the mute, volume up and volume down are on the same flat, so you have to take it to an Apple store so they can fix it, or if you cant go right now you can activate the AssistiveTouch bi going to Settings=>General=>Accessibility=>AssistiveTouch. turn on it will help you.
    Good Luck

  • Lock button doesn't work on iPhone 4

    Lock button doesn't work

    I fixed my powerbutton easily with some
    water repellent oil. I dont know what its called, it is that thing you use for locks and hinges anyway. My iphone powerbutton has been working for like 7 months now. There is no difference from when it was new! I can really recomend this. Just remember to turn of the phone and have it upside down when you spray. And dont use to much! Theres no need for more than a few drops.

  • I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?

    I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?
    May try DIY due to cost
    Just wondering if anyone's had this fixed how much it costs
    Or if it's another problem before I order parts

    I have found the solution for myself for the above.  I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!

  • Captivate 4 Pause Button Doesn't Work

    Does anyone know why the pause in Captivate 4's buttons
    doesn't work? I've rechecked my settings and it's still not
    working.

    On the properties dialog of a button, under the Options tab
    please make sure that the "Pause after:" check box is checked.
    Additionally, the time entered for this field should be comfortably
    less than the slide time so that the slide could be paused well
    before it ends.
    For eg: if the slide duration is 3 seconds then I would
    advise you to have pause after time to say something like 1.5
    second.

  • Pause/Play/Skip Buttons on Keyboard dont work.

    How come the pause/play/skip buttons on the keyboard doesnt work with itunes and works with windows media player?

    Is this an Apple keyboard?
    What version of the Mac OS is he running?

  • HT3176 Menu button doesn't work

    Menu button doesn't work I can scroll up and down but when I hit the menu it doesn't even push

    This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.

  • Insert SIM no Signal Menu button doesn't work

    Hi,
    I have Virgin Nokia 5800 firmware V40, it's currently locked to the Virgin network. When I place another network SIM ( O2 or Orange) the phone boots up but shows no signal and the menu button doesn't work. I want to unlock and have been given a unlock code by Virgin but I'm expecting to see a SIM Restriction message but nothing. Confused - anyone help or had a similar problem?

    This has happened to me before. What has happened (if it is the same problem as mine) is the spinwheel has been shifted. What I did was just poped it back in place. You can do this by just pressing the play/pause button down or the skip buttons, just mess around with it until it pops back in place. Otherwise, I don't know what is wrong with it.

  • Help!! My menu button doesn't work anym

    Hi, I have Nomad Zen jukebox usb 2.0 20Gb, suddenly my menu button doesn't work, there is no reaction when i press the menu button, but the other buttons work very well. Without menu button, i can't load any songs, so my mp3 player is useless. As an information, before i cleaned up the playlist, the player can play songs. Any response will be appreciated.
    Thanks!

    Have you tried resetting the player and running a disk cleanup? To access the Rescue Mode hold down the play button and KEEP it held down, press the tiny reset switch once, and KEEP the play button held down until the player boots into the Rescue Mode. Choose Disk Cleanup from the menu.

  • Stuck on apple logo and Home button doesn't work, help please?

    Well, I dropped my iPod Touch 4g by accident and since that day, the home button hasn't really been working that well. Its very hard to use since you have to press it in really hard to get it to work and sometimes it doesn't even work at all. Anways, I was skyping with my girl and I didn't notice that I had to charge the iPod and it died on me so I was like what ever its normal and started to charge it. When it turned on, it got stuck on the Apple logo and its been there for more than a day now? What can I do? I know about the Press Home + Sleep button together but the Home button doesn't work at all anymore. I tried everything really. I tried to connect it to itunes and see if I could restore it but it won't recognize it no matter where I connect it. Tried it on 3 different computers and none worked at all.  I can't take it to an Apple store since there isn't any close to where I live and I really don't have anyone to take me there. So is there any other solution to fix my problem at home? or is it messed up completely? Someone please help me

    I have this same issue. But also, it isn't just that the lock/home button stops working, all buttons stop working. Even if you switch it to silent sounds are still played. I just got my iphone Thursday. Went to school the next day and pulled it out, it happened while it was locked I guess because my screen was black and I couldn't do anything! Thought it died already! This was around 12. Finally I pulled it out of my pocket again at around 3 and it showed the Apple logo and acted like it had just started back up. Which is what always happens after I get stuck playing a game or something. Help please, has happened two or three times just today.

  • A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

    A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

    I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

    My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

    A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

  • Volume and Power button doesn't work..how do I fix?

    My son's volume buttons or the power button doesn't work.  Is there something I can do to fix these issues?

    Try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • "Submit to SAP" Button doesn't work

    Hi to all,
    I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but  the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url]  seems not to work. Where can I find it?
    Thank you very mich,
    Enrico

    Hi Enrico,
    You can download it from the below link:
    http://www.esnips.com/web/arafatfNewFolder/
    Let me know once you are done so that I will delete the link.
    Regards,
    Arafat

Maybe you are looking for

  • Two IPod Family: How do we separate our accounts?

    I have had my IPod Nano for a year now. My son just bought himself one yesterday and we loaded the program unto the computer. Two Itune Icons appeared and each of the two downloaded my songs which are not his taste. So I deleted my songs from the sec

  • T420: Random freezes on Debian Wheezy

    Hi all, I have a T420 with integrated Intel Graphics. 1-3 times a day mainly when using chromium or iceweasel (debian version of firefox), my thinkpad would become unresponsive and all I can do is a hard reset. While this is only a bit annoying so fa

  • Just need a simple client sending message to server example????

    Im trying to find a simple client-server example, where i can put the client on one laptop, server on the other and pass messages from the client to the server. I've been trying to follow examples and ive had problems with policies, stubs(?) etc etc

  • Interactive Report Charts

    When a user creates a chart in an interactive report, is it possible to set it so that clicking on a bar/pie wedge/value would take them to a report view filtered down to the records in that set? An example: we have an IR, and built a pie chart of us

  • Multiple Backups with Same Time/Date

    I did a complete backup, reset and restore for my iPad 2 this morning (to ensure maximum performance with IOS 8.1). It worked like a charm, but now I have two seemingly identical backups in iTunes - one with a date in the title and the other without.