Headphone prob with strange soluti

My micro is only giving sound out the left channel. However,if i press down the top right corner of the player face with my finger, the sound comes out through both channels. I have a sore thumb now. Any ideas?

Unfortunately you have the not uncommon problem of a failed headphone socket. If it's a recent purchase contact the shop you bought it from for a replacement, or contact Creative support (details are in the FAQ post).

Similar Messages

  • Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

    Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
                                Thnksssssss....

    So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

  • Strange prob with calander

    I m facing really strange prob with calendar --- it is showing all the days of the March 1st to 31st correct but on the top in place of month it is showing February 2008 instead of March 2008. How can Feb has 31 days. I hv checked all the other settings.
    This is happening in every month i.e it is showing the previous months name.
    PLS HELP.

    The standard troubleshooting procedures for the phone are to power the phone off/on. If that doesn't correct the issue, then do a reset. This is accomplished by holding down the home buttong and the sleep/wake button until you see the Apple logo, then release the buttons. Ignore the slide to turn off message. If that does not correct the issue, then connect to iTunes and restore the phone.
    Hope these help you.

  • Intermittent problems with strange patterns on screen

    My new (refurbed) 17in Intel Imac starts up periodically with a strange pattern running at 45 degrees across the entire screen (little multicolor boxes or rectangles) then the screen goes to all blue and freezes with no further activity. I have run the hardware test, reset pram and disk utility with no solutions. It will still boot up perfectly about every 3rd attempt. I'm running 10.4.10. Any help would be greatly appreciated.

    To make sure that this is not software related, set it back to factory settings, without using a backup afterwards, described in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If the screen has still this pattern, the issue is hardware related and the phone needs to be serviced. In that case it might be enough to let Apple replace the screen.
    Screen repair service pricing
    Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
    Model
    Screen repair cost
    iPhone 6
    $109
    iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
    $129
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • Airport connection probs with Mac Pro and 10.4.8  too.

    This prob is not just related to iMacs or MacBooks as published in the knowledge base doc. I have exactly the same prob with my 2.66 GHz Mac Pro. I have to reconnect this beast to my wlan router manually every time.
    PLZ Apple fix this asap!

    I had a similar problem which I've fixed!
    I have four machines here which can connect to my Netgear DG834N via Aiport. (I say can because they normally connect via ethernet.) My MacBook Pro always used to be fine when connected wirelessly but recently, not aware of any changes I've made, it connects for about 10 seconds then disconnects. All other machines are fine and hold the connection.
    This is what I tried before finding my solution:
    1) Deleted all references to the network in the keychain and remade them.
    2) Created another user to try
    3) Changed channels on the router even though I can't see any neighbour's networks.
    4) Made sure computer and router were up to date with firmware/software.
    I'm assuming that it has to be a computer problem as the PowerMac, iMac and iPod Touch have no issues at all. However, the cure was in the router.
    I run with SSID broadcast turned off, WPA2 encryption and MAC address filtering. Allowing broadcast of the SSID cures my problem. Turn it off and the computer connects then drops it ten seconds later. Turn broadcast on and it maintains the connection. I've tried it all afternoon, leaving it connected for about 30 minutes at a time before turning SSID broadcast off again. Works every time! Broadcast SSID - fine, no broadcast - drops after ten seconds.
    Now, if only I knew why! And why only the laptop?

  • Looking for dual wireless rechargeable headphone system with dual docks

    I'm looking for a pretty specific product, and was wondering if anyone knows of a product that'll fit the bill.
    I want a wireless dual headphone system with a charging dock for each headset. Transmitter should accept line level signal from dual RCA plugs. I'd prefer a 900mhz transmitter, but IR is acceptable. Either the system should come with two headsets or it should be a system with a transmitter/headset with the option to add a charging dock and an additional heaset.
    My old system was a Sony which is on its last legs, and I found a replacement from another manufacturer with dual headsets but it lacks charging docks - you have to plug the heaset into the transmitter and both heasets can't be charged at once. Also, the manufacturer says not to charge a headset for more than 24 hours or you can damage the battery.
    Anyone know if Sony or someone else makes what I want?
    Solved!
    Go to Solution.

    Hi Verne,
    Sony does not have manufacture dual Wireless Headphones. You can perform an Internet search and check for any third party dual headphones.
    If my post answers your question, please mark it as an "Accepted Solution."

  • SD card reader prob with L530 on Win 7

    this forum is so crowded, incredible. sorry to say that. have a serious prob with the integrated SD card reader with my L530 on Win 7:
    - not showing in device manager with/without card
    - not showing in explorer, when card inserted (tried different cards, no worries)
    - installed all available lenovo&win7 card reader driver, no change
    - not even LED light flickering or anything, just off, no function
    - no option in power management to enable card reader (as suggested in some forums)
    would be a shame if i couldnt use the in-built lenovo hardware.
    thanks for help
    klingsor

    Hi, klingsor
    I would firstly make sure that the Card Reader is enabled in BIOS. This can be done by entering BIOS (hit Enter at splash screen, then hit F1 when the menu pops up.) From here, select Security and then I/O Port Access. Make sure the Card Reader here is set to Enabled. 
    I would also recommened making sure your BIOS has been updated, as this can sometimes cause some issues with peripherals not working as intended. The latest version can be found here.
    Best,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • I am having a prob with PB10

    hi,
    i am having a prob with authorizations, when am creating a user RAJ and this user i had given a transaction code PB10 it will work on 4.7, but in ECC 5.0 when its ( PB10, PB20 ) giving its not working means u r not having authorizations to access this T_Code.  give some solutions for this very very urgent.
    regards,
    Ramesh.

    try to read the Su53 report for the error

  • No sound from headphone jack with Windows 8.1 (Hp Envy 15)

    Hello all, I have an Envy 15 3040nr and I did a clean install of microsoft latest Windows 8.1 version plus all drivers. Everythink works BUT the headphone jacks. I had windows 8 before and everything worked.
    Once I plug a headphone in either jack (envy 15 has 2) the speakers stop as expected but I get no sound in the headphone. I tested two headphones that work just fine on my phone and other computer.
    I also checked if it was a hardware problem but it isn't. I boot with Ubuntu and both headphone jacks works perfectly.
    I installed several (at least 6) driver versions searching the forum but even when I get the speakers working the headphone jacks never works.
    Please help!

    Hello ArthurSilva,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    You stated that you are able to get the speakers working, but you have been unable to get the headphones to work. I would like you to get your speakers so they are working and then try the steps I have outlined below to get the headphones working afterwards:
    Step 1. Go to the Tiles menu and type "Troubleshooting"
    Step 2. Click on Troubleshooting
    Step 3. Click on Troubleshoot audio playback in Hardware and Sound option
    Step 4. Click Next
    Step 5. Choose Headphones and Windows will automatically detect the problem
    Step 6. Click on "Apply, fix" button
    This should resolve your headphones issue with Windows 8.1. If it does not please re-post for further steps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Prob. with iTunes, Phone won't shut off.  Tks.

    3GS with 6.1.3 Prob. with iTunes.  When I want to close out of iTunes after a Podcast the App will not close out when I hit Home. All other Apps shut down, only prob. is with iTunes.  Cant turn phone off goes back ti iTunes when turned on again.  Tks.

    I hope the previous replies are wrong. It was my understanding that even when Match is turned off in iTunes, music previously matched or uploaded to iCloud will stay there, associated with my Apple ID, even through a cold boot etc. If you want to remove songs from iCloud, but keep them locally, do this:
    1. Click "Store" in the iTunes top Menu
    2. Select "Turn on iTunes Match" (if it isn't already turned on)
    3. Close iTunes.
    4. Hold down the Shift key while you open iTunes - this will prompt you to choose or create a (new, locally empty) Library in a different folder from your main Library.
    5. Now you should see ONLY music that is stored in iCloud.
    6. Delete them all. iTunes will show a checkbox or button for you to click to delete the selected items from iCloud.
    7. Turn off iTunes Match (see #1)
    8. Restart iTunes with the Shift key again, so you can get back to your main Library - with Match turned off.

  • 9 days and counting with no solution...thanks verizon

    8/24, all three of my tvs start experiencing pixelation where the screens constantly cut in and out along with the sound.  I try the support center provided through the menu section.  I try all trouble shooting methods and none fix the problem.  The next day 8/25 I call verizon customer support for assistance.  The gentlemen that answers has a thick accent that is very hard to understand when he speaks english so I ask to be transferred to someone who speaks english as their primary langauge.  He indicates that it is impossible for him to do that so I hang up and try again with another call. 
    The second call leads to the next technician testing my line and restarting my tv boxes.  This does not fix the problem so we schedule a technician to come out to my house.  The next available time would be from 4-6pm on Wed (8/28).  I was told the technician would call thirty minutes prior to arriving at my house.  About 5:28pm on 8/28 i recieve a text message that my request was closed.  No one ever showed up at my house and my tvs were still not fixed....I call customer support at 5:48 and ask why my request was closed, I was told that the technician found no one at home so he closed the request...I was at home the entire time anxiously waiting his phone call and arrival.  Without explanation I was told my option was to make a new ticket and schedule another day for service...Needing this problem fixed I have no choice but to schedule another service date so the next available is Fri (8/30) from 2-4pm.  I take off work again and sit at my house for two hours.  I recieve a call from a blocked number at 3:35pm on Friday and the call drops.  Minutes later I receive a voicemail notification.  It's the technician telling me that there are multiple requests for service in my neighborhood so my problem is not isolated to my house.  He said they were aware of the problem and would have it fixed soon so there was no need to come to my house.  
    Now to Sunday morning (9/1), the problem is still not fixed so another call is made to customer support.  I tell the technician the problem and the history.  He doesn't seem to listen to what I have told him and tries to give me steps to troubleshoot the problem.(this troubleshooting had been done 3 previous times)  I ask to speak to a supervisor which he does not want to transfer me to.  Eventually he puts me on through to a supervisor who doesn't listen to my actual problem but just assures me that the technician can troubleshoot the issue. (He cannot because I had already tried to troubleshoot the issue with other technicians) 
    So here I am 9 days from when the problem started with no solution.  No management that can take care of my issue or really seem to want to take care of my issue...Directv here I come!

    Hi PleaseJustHelp,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

  • Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

    Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

    Bose Product Support

  • I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out".  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record.  Although when I play the same song over again, the "miss" occurs in a different location during the song.  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • IPad 1 Safari Crashes Constantly and getting worse day by day.  Has Apple come up with a solution?  Now I am hearing its alos happening on the newer models.  My company is about to buy a lot of tablets and I will not recommend Apple anything til they fix.

    iPad 1 Safari Crashes Constantly and getting worse day by day.  Has Apple come up with a solution?  Now I am hearing its also happening on the newer models.  My company is about to buy a lot of tablets and I will not recommend Apple anything until they fix the problem.  Granted 30 or 40 iPads is not a huge impact but i promise once the outside world hears about this BS things will change.  There are plenty of other tablets out there that do not have this problem.  At the very least we should have the option of rolling back to a stable IOS...

    I have already tried all the things mentioned above as well as other things such as other browsers etc.  Its is obviously a problem with the hardware.  I also borrowed a brand new 4th gen iPad and it does the same thing.  Even after upgrading it to 6.01.  An occasional crash is one thing and can easily be waved off but this is clearly systemic and the problem appears to be related to graphical images and videos.  Both iPads are the 64gb versions, the only difference other than model is the iPad 1 has ATT cellular.  The new version is clean i.e no other APPs loaded other than what came with it.  I have 7 more coming but im seriously considering sending them back in favor of an Android tablet or the MS Surface.

  • HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

    can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

    Try a new SIM from your carrier.  If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

Maybe you are looking for

  • Apple ID in app store

    when tring to download app updates, the App Store shows only part of my Apple ID name.  It deletes the "@mac.com". thus when entering my password, I get an error message.  Have deleted the account and rentered the info.  Get the same results.  What a

  • Runtime error in the transaction S_ALR_*

    Hi SDN-ers, I have a problem with the transaction S_ALR_8******2 in my PROD system. Although I can open it, then instantly a page with ABAP runtime error occurs. I ran SE16 and entered the Table Name TSTCT and entered S_ALR* to find out all the Tcode

  • Can I save data to a text file without the browser?

    Hello Everyone, I have a stand alone application that would run without a browser on desktop. I would like to write data to a text or database (MYSQL/PHP). Would it be possible for me to extend this functionality to a AS3 Stand Alone Application whic

  • Vendor Evaluation - Fully Automatic

    Hi all, Could you please answer two queries in Vendor Evaluation. 1. What is use and where we assign scope of list in vendor evaluation 2. I want to take evaluation from Invoice also. Configurations I have done but system is not calculating the score

  • Power Mac G5 does not read Photo Bank

    I have an 80 GB Photo Bank produced by Smart Disk. It is a FAT32-formatted USB device with several folders of photographs on it after an overseas trip and I cannot establish stable connection with the device. Every time I begin to import photographs