Headphone static with 10.7.5 upgrade

Ever since the 10.7.5 update I've been having so many audio problems. I have to unplug and replug my USB cables upon waking the machine from sleep. But now I've noticed if you use a headphone jack...there is static through the headphones. I just updated the 10.7.5 supplemental update (issued 10/4/12) and it seems to have solved nothing. Anyone have any advice?

Reset the SMC > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Similar Messages

All i get is static with new Sound C

I just installed a new audigy2 zs, didnt have driver disk so i downloaded drivers off of here, restarted, and now when i plug in anything....headphones, speakers, all i get is a very loud static noise. Any sounds that are suppose to come out are very quiet under the static and sound very distorted. Any help is needed.

intrusionzero,
Well, what you are describing sounds like the spdif jack, which is a digital output (Static with a faint audio)
Go two jacks down to the line out , or green front output. Refer to the documentation if you are unsure.
If you now get no sound, check the Creative Mixer to see if Digital Output Only is turned on.
Daniel

Which headphones come with the iPod? Have they changed over the yeats?

which headphones come with the ipod? have they upgraded to remote headphones? and what style of remote? thanks for your feedback!

It's been awhile since I've logged on and for a very good reason. It's bc of you, PT and your incredibly hurtful remarks that have kept me away. After signing on tonight I was reminded of your insensitive and rude remarks targeted to myself, a Brand new member that you had never met before. I know that you don't care about what I have to say but I did want to put it out there anyways...... Your comments were very hurtful and incredibly mean. For someone who obviously spends a lot of time online and who socializes with other members in this apple community, it is incredibly childish and irresponsible for you to have treated a new member so cruelly. Why would you go out of your way to BULLY A new girl who was just trying to get a few answers about a product?
Yes, maybe my comments were a little bit silly and stupid but by no means were my intentions to be hurtful or malicious.......................on the other hand, your comments were also stupid and silly. Difference being that your comments were malicious and were intended to hurt.
I don't know much about the level system and the point system nor do I care....but as far as I can see, you have not progressed very far since 2011 and I can definitely see why.
Regards
Michelle Marchuk

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this?

Only one of my earbuds on my bose headphones works with my ipad, iphone and macbook- if I hold them there the right earbud will work, but for the life of me, I can't get them to both work. Why is this? And is Apple doing anything about this? While Apple's headphones have (finally) admittedly gotten better of late, I still prefer the much more comfortable headphones & sound quality that Bose makes and that I spent the money for.

Bose Product Support

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

Trouble with Canon 2020Adv after upgrade to Maverick

Hi
We've just upgraded to Maverick and our office Canon 2020Adv no longer even acknowledged print jobs sent to it from the Mac. I followed the comments in earlier posts re problems with Canons post Maverick upgrade and downloaded and installed the new driver. Now I can get the printer to acknowledge that a doc is being sent but it either printer gobbledygook (sorry don't know a better word for it...) from Word or takes forever "processing" and never actually prints anything from Safari....
Any suggestions??
Thanks

Two possible causes for the issue you are having.
1. You are using the Postscript printer driver but your iR ADV C2020 does not have the optional Postscript printer kit. In that case, download and install the UFR 2 v10.3.0 driver
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
2. If you are using the UFR2 driver already, you may have created the print queue using the IPP protocol. The UFR2 driver does not support this. So remove the ADV C2020 from Printers & Scanners and add again, this time selecting HP Jetdirect-Socket for the protocol.

My iphone 4 with 4.3.3 upgrade to 5.1.1,it said to me I should active it,I buy a active-card but it say 'Your request couldn't be processed.We're sorry, but there was an error processing your request. Please try again later.' What's wrong with my iphone

my iphone 4 with 4.3.3 upgrade to 5.1.1,it said to me I should active it,I buy a active-card but it say 'Your request couldn’t be processed.We’re sorry, but there was an error processing your request. Please try again later.' What's wrong with my iphone

It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
Was it?

What's wrong with 10.4.7 upgrade? (Serious Slow-down)

Attempting to install iLife, was forced to upgrade the OS.
(A new iMac G5)
Ran "Updater" with the 150 mb upgrade.
Now the iMac runs slow as molasses... MUCH slower
than before the upgrade.
I've fixed and verified the permissions twice.
How can I speed things up?

Hi FNS,
first of all: WELCOME TO THE DISCUSSIONS!
What did you do exactly? What was your previous system version and how did you update (software update? standalone installer? incremental update? Combo update?).

I've recently installed IOS 7.0.3. With the latest automatic upgrade of First Class yesterday the textfields for loggning in disappears upworth. How can I correct this.

I've recently installed IOS 7.0.3. on my Ipad4. With the latest automatic upgrade of First Class yesterday the textfields for loggning in disappears upworth. How can I correct this.

HALF-SOLUTION!!!! (Restoring only, basically.)
Restore the phone via iCloud.com
1. Go to iCloud.com , and log in.
2. If you want a back up, make sure you back it up to itunes now!
3. Now back to iCloud.com - select the device you want. Press "Erase iPhone" (or iPad, iPod whatever).
You will go through a few steps. Skip the phone number and leave a message, as it isn't lost. Your phone will be restored. No need for plugging in!
4. IMPORTANT: Just set it up as usual. Language, country blah. But then you'll get to a step where it says something like "This iPhone was erased with iCloud. Log in with the Apple ID you used to erase it". In this case, my Dad's. So please do that. Later on, the phone will ask for an Apple ID to be used for the phone. I put my own one as I didn't want my dads!!!! Lol....
5. Plug into iTunes and back-up.
As for updating, I'm still on 7.0.2,,, it ain't working on my phone or itunes!! :(

Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so have any of u used it and from where I can have them ?

Can I use headphones/headsets with my ipad3 because they arnt included in the ipad box so any of u used it and from where I can have them ?

Yes you can use earphones or earbuds. You can use iPhone or iPod earbuds and there are many other headphones that will work with the iPad - and bluetooth headphones wiill work as well.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

Headphone static with 10.7.5 upgrade

Similar Messages

Maybe you are looking for