Headphone volume problem

I have the Late 2008 Macbook Pro 2.8GHZ. Is there an issue with the volume level when using headphones? The volume in my headphones is too loud only 2 bars away from mute. At 1 bar away from mute it is normal. So basically I have two choices for listening with headphones, either mute or the next loudness level after mute. Anything after that is way too loud. Is there a way to internally control that? I checked the sound preference panel but nothing can be done there.
Thanks

The headphone jack is not meant for speakers as it does not put out enough power to drive speakers correctly. Any speakers connected to this jack will have to be powered in order to run at full volume. Otherwise the speakers will slowly "burn" from lack of sufficient current. Your headphones should not be so loud with the volume near the bottom. Perhaps you are using itunes and the equalizer is on and amplification is taking place.

Similar Messages

  • Headphone jack problem with Zen Micro

    Hi.
    I bought my zen micro on April 4 and everything was fine until a few weeks ago
    when I got the headphone jack problem. When I touch the plug that is connected
    with the player, it makes a weird noise and the volume decreases and goes back to normal
    and it keeps doing it.
    Can I get a/s for no charge since it's a yr hardware warranty?
    P.S.) I can see there are some ppl who are getting upset by this same problem here.
    Message Edited by locomocoto on 08-9-2005 2:57 AM

    locomocoto,
    If the store can't assist you, contact our Customer Support to see what they can do:
    Americas Customer Support
    European Customer Support
    Asia Customer Support
    Cat

  • Headphone volume too loud in Facetime calls - iPad Mini Retina 7.1.1

    Hi,
    I have an iPad Mini Retina Space grey 32GB Wifi version updated to the newest iOS 7.1.1.
    I've noticed that the headphone volume during Facetime calls is always extremely loud even on lowest volume setting and there's no way to lower the volume further down. It's independent of the person I call, and the same problem appears in both in Facetime video and Facetime audio calls.
    The bug only appears in the Facetime app and only after inserting the headphones and (not noticable when using the speaker). Setting a volume limit in Settings doesn't affect this loud volume during Facetime calls. I've tried 3 different headphones and I've also done a full reset of the iPad and setting up a completely new iCloud account.
    I also have an iPad Mini (1st gen) and an iPhone 4 and I don't experience this bug on those devices.
    Have anyone experienced the same bug? Any solution?

    pandora?      once I got used to it, it bacame second nature to simple reach over and toggle the hotspot off and on.  not great if you have the constant need, but if you have the constant need, it wouldnt be shutting down in the first place.  
    If this is a big issue for you, and there is no persistant wifi available, you might think about a standalone portable hotspot.  Pretty much every carrier in the US has one they would be happy to sell you, along with a data plan.
    (look on e bay for a used one )

  • IPod Shuffle 3rd Gen - Volume problems

    I have an iPod Shuffle 3rd gen.
    This week it started to develop a problem that I am not able to turn the volume uo or down.
    I tested with another earphone and a brand new earpod (that are working properly in an iPhone 4S).
    I also tried to restore the iPod. And this have note hekped me.
    What should I do to fix this volume issue?
    Thanks

    Hey paralelopipak,
    Thanks for the question. After reviewing your post, it sounds like the headphones have a volume problem only on this iPod. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Resetting iPod shuffle
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Lumia 535 Bluetooth headphone connection problem.

    I having problem with Bluetooth headphone connectivity problem. It is not showing the Bluetooth headphone in Bluetooth device search...
    > I also facing the problem with MixRadio...
    MixRadio not allowing me to download song through it..
    I tried every thing which shown on help+tips and solutions on company site , but its still not resolved...
    Help me please to solve this problem...

    Travellers wrote:
    MixRadio not allowing me to download song through it.
    Because Microsoft Mobile Community is rather high volume in threads, I recommend to create one thread for each topic. Especially in this case, because MixRadio has its own section. Are you able to log-into MixRadio with your Nokia Account? Are you about:
    A) individual songs (or complete album; purchase),
    B) offline mixes of MixRadio+, or
    C) MixRadio Unlimited download subscribtion.

  • Different headphone jack problem: zen mi

    Hello,?I have read the topics about the headphone jack problem. And i followed the fix. It did not work. The topics describe thwt one half of the headphone doesnot work: left or right. This is not my problem. The headphone gives a very low volume, and bad quality sound,? untill i twist the headphone long enough... its not the headphone thats broke, i tried different ones. Anyone had this before, or knows what could be wrong?Thanks.

    I've got the same problem, it developed about 4 months after I purchased the player. At first I just ignored it and proped it against something to keep some pressure on the jack, but now its way to bothersome. The warrenty is void and the tech support people only say that they can fix it for me or help me fix it if I pay a butt-load of money.....
    So the question is, what to do about it's

  • My volume doesnt work and when i press the volume button it shows the headphones volume on the screen without any headphones being plugged in. what can i do to fix this?

    My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?

    Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it

  • Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5

    Anyone know when Apple will bring out a patch to fix the volume problem you get on mac mini after downloading OS 10.8.5?

    Only Apple knows the answer to whether or not there is a verified problem and if so when will a fix be released.  As is their custom, Apple does not talk about these things and the rules of these communities prohibit speculation about future udates or upgrades. It is probably safe to say if a fix is deemed necessary it will be called OS X 10.8.6.

  • 9 month old Zen Micro with the headphone jack problem

    So, I've been putting up with the headphone jack problem for a few months now, and i've finally decided to get it repaired or fixed. I emailed Creative a few months back and they told me to send it in. My question is, since I am out of warranty, will they repair the unit or send me a whole new one all together?
    thanks,
    mike

    Actually, I just sent in my 7-month old Micro in b/c of the headphone jack problem and they sent me a brand new shrink-wrapped one. They <EM>didn't </EM>charge me for anything. All I had to do was wait 2 weeks for them to send it back to me (grueling but doable) and pay about 2.44 for shipping the micro to them. So now I'd have three batteries if it weren't for the fact that one of them swelled up; I have NO IDEA how that happened. So yeah I guess the point of the post is that you don't get charged anything even if you're out of the 90-day labor warranty.

  • ALSA - Master volume no longer having an effect on headphone volume

    I use ALSA and have both my 'front' (speakers) and 'headphone' audio volume set to max. Then I control the two by adjusting the master volume.
    Since my last system update this worked fine however now when I change the master volume it only affects the sound coming from my speakers and my headphones are constantly at max unless I specifically change the headphone volume in 'alsamixer'. This is inconvenient since I have the master volume controlled by hotkeys.
    I know I can work around this and hotkey my controls to change both the master and headphone volumes but this leaves room for things getting out of sync. Is there a way to revert back to the old method?

    Hi-
    "Essentially" a clone and a clone are not the same. There are alot of things that don't get copied when you simply drag folders. Pathways to aliases are one of them.
    Use SuperDuper! (the best IMHO) or Carbon Copy Cloner to get real bootable clones of your system and files.

  • Petition: Make the headphone jack problem's status publ

    Dear CEO of Creative Labs [I still have to find out how to contact the CEO]:
    I was very excited about buying your product, the Creative Nomad Zen Micro, as an alternati've to competitors such as Apple's iPod mini and the Rio Carbon. I was impressed by the numerous features, the looks, and the size of the player, which could fit into the palm of your hand.
    Unfortunately, I came across a serious problem with the player that could have serious consuquences on my (and many other people's) buying descisions. There seems to be a defect in the headphone jack of the player, causing it to pop loose and make the sound intermittently come through only one of the headphones, in a few months or even a matter of days, making the player unusable.
    Countless members of the Creative community in the forums on your website have gone through three to four Micros with this problem, as well as people commenting on the player at review websites such as Cnet. There have been numerous messages sent to customer support about this problem, but it has all been attributed to user error.
    If you just take a look at the Creative forum, there are so many people with this problem that it can't possibly be a rare manufacturing defect, especially considering the fact that quite a few people have gone through 2 or 3 micros already, all with the same problem. We are not asking you to immediately fix the problem, we understand that it would probably entail a large and costly effort to do so. What we do want to know is that we want a public announcement of the problem, whether Creative has confirmed it or not, and what is being done/not being done about it, and perhaps customer tips about how to avoid it. There have been rumors that the headphone jack as been supposedly reinforced by a metal plate, and others... Many potential creative customers like such as me are left in the dark about what most forum users refer to as the "dreaded" headphone jack problem. We would like to know about it, what to do to avoid it, and whether or not something is being done/has been done to new products to prevent this problem from happening. Again, contacting support has not answered our questions.
    If I, (and countless other potential customers), are uncertian about this problem, we might as well give up a few features like the FM tuner and buy and iPod mini or another competing product free of such a problem. We would very much appreciate it if you would publicly release information about this problem.
    Please contact me at the address shown. [Yes, this IS a snail-mail letter] We are all looking forward to a reply. For more information, please refer to the petition here:
    [http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=34476]
    Sincerely,
    The Creative Forum Community
    Any suggestions/comments/corrections? (This is just a quick first draft) Please sign here for the petition. Also, you could post "testimonials" about your opinion on the headphone jack problem. I'm not expecting a reply from the CEO him/herself but I hope to get a better response than just an email to support.Message Edited by CreativeHead on 03-7-2005 02:03 PM

    There are threads ongoing on similar topics. This is not a suitable topic for this forum.
    I will pass on any comments from the other threads and original post in this one, but I'm closing this topic and any further petitions like this as it will just result in "Creative-bashing" and unproducti've comments.
    Cat

  • Headphones volume controller not working on new macbook pro

    Hello,
    I recently purchased a new macbook pro (15" late 2013) and just noticed that when plugging my headphones (beats solo HD), the volume controller in the headphones doesn't change the volume of the laptop. The headphone controller works fine on my iphone, and on my older macbook pro (2010, running on mavericks too). I checked the Sound settings under System Preferences, and under the Input tab, the new macbook doesn't recognize the headphone microphone either, which my old macbook pro still does. In terms of sound, the headphones work well, and under the Output tab, the Headphones appear, as normal. The sound can also be adjusted using the keyboard keys and the volume adjust on screen, but not with the headphones volume controller, which seems odd to me.
    Is there a way to fix this?
    Thanks for your time!
    Melissa

    Hi,
    I also noticed this... when I use my old earphones (the white Apple ones that come with the iphone) on my new laptop, everything works fine, including the microphone, volume control, skipping songs... etc. But my other headphones are not recognised at all, just as audio output and nothing else.
    My old macbook, however, still fully recognizes both my old earphones and my "troublesome" Beats headphones, even after the latest system update, as does my iphone
    So I still don't know what is happening.
    Just telling you this so that you make 100% sure your earphones are faulty before discarding them!

  • Trying to backup despite Volume problems

    I appear to have some volume problems with my internal HDD.
    When I try to diagnose and fix it with Disk Utility the error is:
    "Incorrect number of thread records" & "Invalid volume directory count"
    Though the volume needs repairing, disk utility can't do it (nor can TechTool Pro http://www.micromat.com/index.php?option=com_simpleboard&Itemid=42&func=view&id= 525&catid=6)
    Since I can't fix it I think I understand that it would be best to back things up, reformat the drive.
    My question is esssentially academic. Would backing things up copy the volume problem I'm experiencing? or would it even allow me to copy things correctly? And how does one know what file was damaged or corrupted?

    Good questions. Repairing the HD problem is something Disk Warrior could possibly correct. It's the best app. for resolving directory problems.
    Did Disk Utility specifically tell you that it couldn't fix the drive, or did it simply report the error. If it's the latter, I would rerun Disk Utility as many times as necessary to get a clean run (no problems). This may not be possible given what was reported in your Micromat referenced link, however, it's worth a try.
    Given the current state of the directory, you would not be able to create a clean clone backup of the drive. I suspect you would see an error during the copying. You could though drag/drop specific folders/files to the drive to the extent your HD cooperates. IMO, a "must" for any maintenance strategy.
    Do you have a current cloned backup of your system. If you do, you could always copy it over the existing drive. If it is "somewhat current", you could drag/drop important data files on your computer's HD to either external media or another parition on the external, then recopy the clone to the HD. Afterward, move the data files back to their original locations.

  • Headphone Jack Problem X's

    Just thought I'd put my two cents in. I have just started experiencing the infamous headphone jack problems on a Zen Micro I bought less than 6 months ago where it cuts in and out, etc., etc. Funny thing? is that I had the same thing happen with a Zen Muvo I purchaed before that. I thought it was a fluke. Apparently not. Wish I would have visited the discussion groups earlier... Think I can still get it replaced?

    It's very rare for a MuVo to have this, so it sounds like you've been doubly unlucky unfortunately.

  • Headphone jack problem with the zen mi

    Not even 2 months after sending it in to be fixed, and I can't move my head without the sound getting distorted. Why don't they fix the problem not just make it work for a month in a half. Is there anyway to fix this withut sending it in?

    I gathered that a lot of people have experienced headphone jack problems with their players, but I thought that was with the Micros only. I guess I'm glad I'm not the only one. Or maybe I'm not. I dunno.
    Anyway, I sent an e-mail to customer support. My wife bought the unit for me for a Christmas present last year, so it's only a couple of months out of warranty. If nothing else, hopefully Creative will tell me how to ship it back for repairs at my own expense (it's gotta be cheaper than buying a new one).

Maybe you are looking for

  • W520 i7-2860QM with 2 memory modules and CPU-Z Reporting them as Slots 1 and 3?

    Is this normal for CPU-Z (1.59, 1.60, 1.61) to report a matched kit pair of properly populated memory modules as Slots 1 and 3 in "dual" mode?   One is under the keypad in the upper slot #0 while the other is in slot #1 under the chasis on the left c

  • Which function module to delete job log?

    Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log? Thanks a lo

  • Open DashBoard Report from SAP Business ByDesign

    Dear All , Can any one help me , I need to run DashBoard on IPAD I Download SAP Business ByDesign from ITunes but he just asking me about system and there is any important information like CMS Name , Authentication Mode . So I need help to know what

  • Printing format control in ALV TREE

    Hello there, I searched all over SDN but I couldn't find a solution for my problem ! It would be nice of you if you can help me sort it out. I'm using an ALV TREE : DATA: gv_tree             TYPE REF TO cl_gui_alv_tree   CALL METHOD gv_tree->set_tabl

  • Converting file format in Premier Pro

    I am using Premier Pro CS5.5. I want to know if I can import a .mts file and use Premier to convert it, or save the file as, a .mov, .wmv, .mp4 or other video file format?