Headphone with mic not working properly on Bootcamp Windows 7

Hey, guys. I have a Macbook Air mid-2012, installed Windows 7 (Bootcamp) and I wish a I could use my Sony Stereo Headset DR-EX12iP with mic for chatting while playing some games. But the microphone isn't working in Windows 7 and I don't know why. I already searched over the internet about an answer but found none. The build-in microphone of MBA is too much sensitive and bother my friends. Just for information, I use the same headset in Mac OS X and it works perfectly with facetime and skype.
I hope somebody can help me out. Thanks!

I found this after doing this post: https://discussions.apple.com/thread/3369017?start=0&tstart=0
Apparently there is no good answer for the problem...

Similar Messages

Hi there, Fn + F1 to F12 special features are not working properly in bootcamp Windows

Hi there, I m just wondering recently my keyboard special features keys are not working properly(fn F1 to F12). Is there any solutions for this?? For example I cant switch the brightness with fn F1.. THis is so troublesome.... Please help! thanks
This was working fine in the early stage until recently which is not functioned properly.. ANy way to fix this up?? Thanks!

I had tried them...but its all good now... Guess RegPro must be delete my bootcamp item..So I just redownload them n reinstall...all back to normal!...THANKS!

Headset with mic not working on Mac Mini

I have a 5 year old Mini and a brand new one (haven't hooked up the new one because I have to take it to the Apple store to get the data migrated, which BTW Apple now charges $99 for, they didn't before) My problem is getting the mic to work. I am almost positive the old one does not have a built in mic, does anyone know if the new one has one? I have a headset with both the earphones and the mic that I cannot get to work. There are two jacks on the back, one for input one for output. Neither headset mic is working. I even bought an adapter with two jacks and tried that, but it doesn't work. The output works both ways, it is just the mic I can't get to work. (Rosetta Stone software) Couldn't get much help from the Apple Tech support line. Anyone have any ideas?

Ge a headphone/mic combo like used on a phone:
How to use Apple Earphones with Remote and Mic with your Mac - Apple Support
Also, you can get and some headsets (earphones and mic with separate plugs) cme with an adopter which combines the two plugs into one plug that will work with the Mac and phones.

Binding gateway service with List not working properly with expand

Hi all,
We have an orderlist with details, we use the splitapp for it, it's working nicely with a gatewayservice. We have now added with expand 2 orderpartners. I see the 2 partners, only is it completly the same data. I checked the oData structure and I see indeed that the 2 partners are the same. This is weird, because when I execute the service, via my browser, I see 2 different partners.
If I execute the service directly via the read function, I see in the oData that I also have 2 different partners. So my conclusion is that the direct read of the service is working and executing the service via the sap.m.List is not working with the expand.
Now my question is, does somebody know what's going wrong here, or is it a bug in the sap.m.List? Below you find code snippets how I call the service.
This call is working:
oModel.read("/OrderListSet", null, ["$orderby=BegTstmp asc&$filter=Userid eq 'user' and DateFrom eq datetime'2014-04-20T00:00:00' and DateTo eq datetime'2014-04-27T00:00:00'&$expand=OrderPartners"], null, function(oData, oResponse){
}, null );
The binding via the sap.m.list is:
var oList = new sap.m.List("orderList", {
mode: "{device>/listMode}",
            items: {
        path: "/OrderListSet",
           parameters: {expand: "OrderPartners"},
        template : new sap.m.StandardListItem({
        title: {
               parts: [
                       {path: "BegTstmp", type: new sap.ui.model.type.DateTime({pattern: "H:mm"})},
                       {path: "DataCol2"}
               formatter : function(strDate, strDescription) { return strDate + " - " + strDescription; }
        description: {
        parts: [
                      "DataCol3",
                      "DataCol4",
                      "DataCol5",
                      "DataCol6"
        type: sap.m.ListType.Navigation,
        icon: "{icon}",
        customData: [
        new sap.ui.core.CustomData({
        key: "orderId",
        value: "{Orderid}"
        new sap.ui.core.CustomData({
        key: "type",
        value: "{Type}"
        // Sort the list on date and group the list on day
               sorter: new sap.ui.model.Sorter("BegTstmp", false, oGrouper),
               // Filter the list, this directly refrenced to the gatewayservice
        filters: [
                 util.Filter.getUserId(),
                 util.Filter.getCurrentWeekFromFilter(),
                 util.Filter.getCurrentWeekToFilter(),

Fine. If you're trying to bind any attributes of OrderPartners, bind it as OrderPartners/attribute-name. Say if "BegTstmp" an attribute of OrderPartners bind it as OrderPartners/BegTstmp.
Regards
Sakthivel

In-built mic not working after installation of windows 7 on my hp nc8430

So I installed windows 7 on my laptop which originally was running windows xp (hp compaq nc8430) and it turns out that the inbuilt mic is not working and it won't even recognise the SD card that i insert in the card slot. Everything was working perfectly before the installation. I checked the audio devices in control panel and it says the microphone is not plugged in. Also the screen resolution is weird, it won't go above 1024x768, everything is too big for my liking.
Could someone help me out please? Thanks in advance.

Are you using Boot Camp to attempt to install Windows?
https://www.apple.com/support/bootcamp/

Mouse pad not working properly having downloaded Windows 8

Hi, having downloaded Windows 8 to my laptop (HP Spectre xt 13-2000ea) the mouse pad has stopped working properly. The "two finger" page down/up and left/right has stopped working.
I have looked at the mouse settings and it currenlty states the synaptics hardware is installed and working correctly.
Have even gone onto the Synaptics website but have been unable to download something that can correct it. The HP hardware updates page on their support website does not appear to have anything that deals with Windows 8 problems.
Any help much appreciated. Thanks

Had exactly the same issue with my HP laptop. The Windows 8 driver installed with the OS works OK but the Synaptics driver in the latest Windows Update will not scroll. I had to uninstall the existing (newest) driver and install the HP Windows 7 driver from this site (an older version) then in Windows Update you have to wait for the Synaptics driver update to be offered (obviously you have to do a manual update and not allow it to install automatically) and then right click on it and select hide update.

Can anyone help with Terminal not working properly on 2013 (late) mac pro?

New 2013 (late) mac pro. 10.9.2 osx
Using Terminal utility and giving "cat" command, I get a return message of "file or directory not found" even though the files are right there. This is a little procedure I have performed with older mac pro and laptops (also Mavericks) and never had a problem.

Thank you for posting Linc. I worked it out, it is a case of user error.

VS 2013 template with references not working properly

I'm trying to create a set of templates that contain references to dlls. When I create a project with references and then export it the references are saved into the template but the files aren't copied.
I have created a class that implements iWizard and copies the remaining file types (.dll, .xml etc.) in the correct folder when you create a new template. This is also working.
Now the problem was that I needed the project to know that it should use the dlls that are copied into the project folder. So I edited the .vbproj file and inserted the path manually, i.e. I found the reference tags and removed the path information so they
only referred to the file itself. Like this:
<Reference Include="MyDll"><HintPath>MyDll.dll</HintPath></Reference>
This workaround is almost working. VS finds the dlls and lets me use them, but only if I go to project -> properties and then clock on the reference tab. The classes are not recognized until I do this. I get the usual type or class not defined error
until I simply click on the reference tab in project properties.
It seems to me that I have missed a step when I was doing my workaround and Visual Studio completes it when I click on references. I just don't know what that is or what a good alternative to my solution would be.

Hi Mongan,
I have been researching this issue these days. You can check whether there are some differences in MyTemplate file and the project file before and after you click the references tab in project properties? Maybe you will get some information.
In addition, I doubt maybe you missed something in your iWizard extension. the following link introduced detailed ways and code to create project template using IWizard interface, you can reference it to check whether it can help you.
http://www.codeproject.com/Articles/391989/Working-with-Project-Template-and-Wizard-Extension
The following threads suggested adding the project reference in the ProjectFinishedGenerating() method to add a reference to project template:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/f57d8eed-ba7a-4e82-bed4-1dd4b8a3a288/custom-wizard-adding-references-dlls-to-a-project?forum=vsx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b4d4f816-70b6-4042-bb34-324a7da1a3e2/custom-wizard-is-it-possible-to-add-a-dll-reference-to-a-project-on-creation-from-a-custom-wizard?forum=vsx
If the suggestions above does not help you, I find that
Visual Studio Integrate forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsx is a better forum because you are using iWizard to create project template. You can open a new thread about
your current issue and post some code about iWizard there, Visual Studio Extension experts will provide you better support.
Thank you for your understanding.
Have a nice day:)
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Publishing site with Workflow not working properly

Hello All
I have created a Publishing Site Collection on SharePoint 2013 on-premises and when I create a new sub-site using the "Publishing site with Workflow" template, I get redirected to
the site home page and I get the option to PUBLISH the page. But, when I try to publish the page, I get a server error. Now, instead of trying to publish the page, if I refresh the page I this time get an option to check-in the page, after checking the page
in, i get the option to publish it, now I can publish the page without any error. This does not happen on my DEV server, but only on QA. I am using the "Publishing site with Workflow" template,
which associates an OOB Page Approval workflow with the Pages Library.
Please help me guys!
Parth

Hi Parth,
Based on your description, you encountered the issue with Publishing site with worklfow site template.
Please provide more detail information about error returned, and see if there is related error message in ULS log.
Could you please recreate a new site on DEV server to see if the issue still occurs?
I wonder if there is difference on Workflow related settings between DEV server and QA server.
Regards,
Rebecca Tu
TechNet Community Support

Website built with iWeb not working properly on PC

How can I ensure that everything that I build in Iweb will open correctly if someone goes to my website on a PC? In particular, people have had problems listening to music that I have put on my site. I tried embedding a music player, and I have also tried using hyper links to my songs - but this continues to pose problems fir PC users.

Have you read this page from Roddy's iWeb for Musicians site: How to get your iWeb Site to load in Internet Explorer?
He also has several pages dedicated to flash audio players.
OT

SCCM 2012 Distribution Point not working properly on a Windows 2012 Server

I have an SCCM SP1 site running on a Server 2008 R2 machine. I had a couple of distribution points, also running on 2008 machines. These served as DPs and PXE boot points. I had no problems with these.
I resently added a Server 2012 machine, and set it up as a DP, with a PXE boot point. The servers is part of a boundary group containing about 1500 clients. I distributed all of packages that are included in my main task sequence, and am able
to PXE boot, and image machines successfully.
However, I am having problems deploying other packages and Windows update packages from this DP. It seems like I am only able to deploy packages that have the "Copy the content in the package to a package share on distribution points" enabled.
If this is not enabled, the client will get the deployment policy, but will never download the package. The "In Progress" tab for the deployment status will just say "Waiting for content".
I have checked the rereqs for IIS on the Server 2012 DP, also checked the firewall. Everything that I see seems to be OK. Are there other things that I can check to determine why this DP isn't working right?

Hello,
According to the following description, this behavior would be normal:
If you configured the option Run program from distribution point on the
Distribution Points page of the Deploy Software Wizard, do not clear the option
Copy the content in this package to a package share on distribution points, because this will make the package unavailable to run from distribution points.
http://technet.microsoft.com/en-in/library/gg682178.aspx

Right click Open With sometimes not working (Photoshop Elements 9, Windows Vista)

We recently upgraded from Photoshop Elements 7 to Photoshop Elements 9. We are running Windows Vista.
Last night, my wife was right clicking on JPEG images in her My Pictures subfolders and choosing "Open With" to open the files with Photoshop Elements. In some cases, this worked. In other cases she would right click the file, Adobe Photoshop Elements would start, but the picture itself would not display.
I tested one of these pictures and was able to open it with other applications, and was able to open it by choosing "Open" from Photoshop Elements' file menu.
Has anyone run into this before? Why are some pictures not opening when you right-click and use "Open With"?

Hi,
you can make PSE9 default program for opening any image on you vista machine.
Then it souhld work fine.
cheers,
Sam

Latest windows 7 patches and firefoz 18 - firefox not working properly - shows stacked windows and does nothing

Jan 10 windows 7 patches, plus new firefox update today. Now firefox starts up and shows multiple, stacked window frames and "firefox not responding" messages on top border. after multiple firefox screen flashes (minutes of time), firefox may eventually display normal windows/frames. Selecting new site, firefox goes through same activities. Startup site is www.baynews9.com, then try going to www.cnn.com

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

My HP laptop not working properly after installing window 7ultimate 64 bit

This laptop is provided by UP Govt (INDIA). i installed windows ultimate 64 bit,2 days ago and installed all the drivers. But their is two drivers which is giving errors. these are
1)PCI Device- ERROR IS---The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
2)Ethernet Controller- ERROR IS--- The drivers for this device are not installed. (Code 28)
Hardware id is
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3564103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
My main problem is that laptop is hangig too much continously. i dont know what is the exact reason and what should i do..Its not heating so their is null chances of heating effect.. I wants to get rid of this hanging problem.Pls provide me link for to download the genuine drivers and solution for this hanging problem..As it was not hangig earlier on Windows 7 home basic (provided by Hp)
This question was solved.
View Solution.

Hi:
Here are the links to the drivers you need...
PCI\VEN_10EC&DEV_5209:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8136:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&dlc=en&lc=en...
The only suggestion I can offer regarding the notebook not running so good is to download and install the amd chipset drivers from the link below and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Xcelcius is not working properly under both Windows 8 (64 bit) and Windows 7 (32 bit)

Hi all,
I use Xcelcius ver 4.0 under Windows 8 (64 bit), but it cannot load canvas and data query. I tried to use Windows 7 (32 bit) but got the same result. What should I do to solve it?
Here is the design captured:
When I run, it's the result (nothing happened):
Need help. Thanks.
Best,
Pri

Hi,
go to file ->Document prperties and check "show loading staus"
prewiew the dashbaors and check in which stage the dashbaord is stucked, perheps you have configured an external connection and you need to configure the corssdomain file
please try also to export the dashbaors to swf format and try to open it using a browser, if you reporduce the problem so please follow the sap kba 1767433
Best regards,
Mohamed AISSA.

Headphone with mic not working properly on Bootcamp Windows 7

Similar Messages

Maybe you are looking for