Headphones and Mic do not work with Vi

I have a Soundblaster Audigy 4, and am using Windows Vista. The Creative Audio Console recognizes that I have a mic and headphones plugged in, but they do not work at all. Switching the audio output from speakers to headphones merely causes the volume to raise to 00%, but the sound still comes through my speakers. Any help out there?

Try A to D
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(C) Reset all settings
Settings>General>Reset>Reset all settings
(D) Restore iPad
1. Connect your device to your iTune (computer).
2. Select your iPad when it appears in iTunes.
3. Select the Summary tab.
4. Click the Restore button.
Note: Data will be lost

Similar Messages

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • My logitech mic does not work with Audition anymore

    My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

    Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
    Go ahead and delete thread if you like.

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • HT4972 2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store.  Is there any way to find out which apps will work with 2nd generat

    2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store?  Is there a way to find out if the App will work before you download?

    Look to the app developer to provide that information when browsing the iTunes Store.
    The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
    If you aren't happy then sell it and buy a new one.

  • Savevid and keepvid are not working with os 10.7.3-Is there a fix?

    savevid and keepvid are not working with os 10.7.3-Is there a fix?
    Is anyone else having this problem?

    A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day!  Did exactly as written and bingo,  missing tool icons appeared BUT, and there's always a but...
    I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
    Hardware:
    Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
    RAM: 6Gb (667MHz DDR2 FB-DIMM)
    HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
    Software (OS)
    OS: Mac OS 10.7.3 (updated to this 06.02.2012)
    Problem software: QuarkXPress 8.5
    Thanks in advance for any advice / help...
    Paul

  • I started to download Maverick but then read that Word and Excel do not work  with Maverick.  I hit pause on the download. How do I stop the download.  In non technical terms please!

    How do I stop the download of Maverick on my MacBookPro?  I started downloading then discovered that 2008 Word and Excel do not work  with Maverick. I have too many files in the 2008 version to upgrade them at this time.  I just need instructions in non technical terms to stop the Maverick download.

    I did the same as Tapmr and have paused the "upgrade".  So am I to understand that the upgrade only downloads and will not automatically install it?  I am an extreme novice here, and cannot afford any issues after I upgrade/download.  I don't know how to make a clone copy as you suggested either.
    I need assurance that if the upgrade is allowed to continue that I will be able to delete the upgrade downloaded and continue on as before with my regular system. 

  • PSE13 trial version and it will not work with Windows 7

    I have downloaded PSE13 trial version and it will not work with Windows 7

    I have been using PSE 13 for 3 months with no problems.   When I launch the Editor in PSE 13 this is what I get -
    "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
    RAM 12.0GB
    64 bit operating system
    Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
    Windows 7 SP1
    Hope this helps.
    Lynne

  • HT4623 My iPad 2 audio only works with headphones and orientation does not work at all

    My iPad 2 volume button does not work with the integrated speakers of my iPad, once a headphone is connected to the jack output of my iPad the OSD volume displays fine and works to the external headphone but once the headphone jack is removed, there is no more a volume bar and the side volume buttons don't work at all, this has affected the screen orientation as well, screen does not orientate  as well,
    Please help

    If you deleted files from the operating system, you wrecked your installation and the first thing you need to do is either restore those files from a backup or reinstall the OS. Doing that is never the solution to any problem. Back up all data before making any changes.

  • HT2844 Head phone and mic is not working in mac pro

    i have philips headphones and mic. this is conected but not working

    What part is not working?
    Do you get any sound out?
    Do you get any sound in?
    What does the contol panel indicate?

  • Canon Pixma MP-540 (and other) does not work with Cups 1.4

    Since Cups 1.4 my printer does not work
    its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
    So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

    I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
    and lsusb output:
    Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
    . Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

  • Crystal report 8.5 export to csv and rtf format not working with office 2013

    Hi Experts,
    Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
    i debugged the code and found the application hangs at function Report.Export(False).
    below is the code snippet
           .PDFExportAllPages = True 'ePDFExportAllPages
           .PDFFirstPageNumber = ePDFFirstPageNumber
           .PDFLastPageNumber = ePDFLastPageNumber
           .RTFExportAllPages = True 'eRTFExportAllPages
           .RTFFirstPageNumber = eRTFFirstPageNumber
           .RTFLastPageNumber = eRTFLastPageNumber
           .UseReportDateFormat = eUseReportDateFormat
           .UseReportNumberFormat = eUseReportNumberFormat
           .UseReportNumberFormat = eUseReportNumberFormat
           .XMLAllowMultipleFiles = eXMLAllowMultipleFiles
           .XMLFileName = eXMLFileName
           Report.Export (False) ----Application hangs here and eventually crash
    Looking forward for your help, as it is very urgent
    Regards
    Mohit

    Hi Mohit
    CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
    Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Y410p Front headphone and microphone jacks not working after repair

    I recently (last month) sent  my IdeaPad Y410p in to Lenovo for repairs due to the laptop not turning on, or repeatedly restarting at the BIOS screen. The laptop was repaired by Lenovo (they replaced the motherboard), and returned it to me. The laptop has worked great sincce then, except that the two USB ports on the right side and the headphone and microphone jacks do not work. I have reinstalled the audio drivers, twice, but have not reinstalled the chipset drivers at all, as I don't want to screw around with those untiol I no more about what I should do. Any help would be appreciated.

    Hi Talonek, welcome to the forums,
    the problem you are experiencing is probably due to the cable connecting the ports on the right side, front of system, to the mainboard unfortunately not being connected or connected properly.  Please see pdf page 52 of the system's Hardware Maintenance Manual.
    I've never taken an Y410p apart, but having looked at the manual the cable connection may well be accessible to check / fix by removing the hard drive.  Another alternative would be to call service and ask them to do this for you.

  • How does Apple EarPods with Remote and Mic(MD827ZM/A) work with iPod 3rd Generation

    I have recently bought EarPods With remote and mic (MD827ZM/A) for my old iPod shuffle (3rd generation) Software V 1.1,  capacity 2GB
    but these EarPods doesn't seems like working with my iPod, any possible solution ?

    You can also get an "adapter," that has compatible remote control buttons.  There are several such products, for example
    http://www.amazon.com/iLuv-iEA15wht-Adapter-Earbuds-Headphones/dp/B002RL9WE0
    You can then connect the any standard headphones to the adapter, including Apple EarPods.

Maybe you are looking for