Headphones doesn't fit anymore

Hey
I have a little problem with my iPhone 3G, the headphones doesn't fit anymore. I have used the headphones with the phone since I bought it (July 2008) without any problems, but today when I tried to plug in the headphones, they didn't want go all the way down, and sound quality was terrible. I can push it all the way down (and the sound is normal), but it goes up again if I release them. It seems like something is stucked in side there (altough I can't see anything), or that something is broken. I have tried with two different headphone (both made for the iPhone 3G) with the same result.
It could also be dust, but I seems strange that it should go from working perfectly fine (yesterday) to not working at all (today).
Anyone experienced the same problem with their phone before?
I'm considering going to the Apple Store in Orlando tomorrow to see if they can help (the ATT store where I bought phone couldn't help at all), but if someone knows something I can try before driving to Orlando, I would appreciate it.

Take a look at this shot:
http://i637.photobucket.com/albums/uu99/Dakine/3GJack1.jpg
It is a shot of how it should look, the white plastic at the bottom is the moisture indicator. If you see lint you may be able to get it out with a very thin wire with a bend at the end to hook the lint out, just make sure the wire is soft and the phone is OFF

Similar Messages

  • My headphone doesn't fit the phone anymore, something's stuck

    I cannot insert my headphone in my iPhone 5, something is in there and I cannot get it out.... what to do?

    schedule an appointment at the Genius bar of your local Retailstore to get it fixed. There might be a fee involved, so bring money.

  • PDF doesn't fit anymore

    Hi,
    We are converting PDF's from Word 2003 documents with Acrobat 9 Standard. Since yesterday the PDF doen't fit with the word document (see attached). It seems the text is set to 90 % zoom instead to 100 %. You can see that clearly on the grey block on the bottom of the page. It should be exactly on the page's bottom and in the edge, not somewhere else.
    Reinstalled Word and Acrobat, but no success. Problem still remains.
    Have anyone seen such weird output and know how to fix it?
    Your help is always very much appreciated.
    Thanks, Sebastian

    Take a look at this shot:
    http://i637.photobucket.com/albums/uu99/Dakine/3GJack1.jpg
    It is a shot of how it should look, the white plastic at the bottom is the moisture indicator. If you see lint you may be able to get it out with a very thin wire with a bend at the end to hook the lint out, just make sure the wire is soft and the phone is OFF

  • Headphone jack doesn't fit in my MBP 2011

    My (samsung) headphone doesn't fit in my MBP. This is my first mac, do only mac headphones fit in the MBP or is this a problem off my mac only?
    Any suggestions would be more then welcome.

    Thx for the reply's. I'm afraid i know the answer to my own question now tho, it looks like the plug isn't mounted straight. Which probably means the entire board is mounted a tiny bit off as it should be.
    Bah i hate when this happens.

  • Workspace doesn't fit the screen anymore...

    Hello.
    Since today (and Mac OS X's update I installed this morning, I guess), my Photoshop CS6 workspace doesn't fit the screen of my 12 inch Cintiq (connected to a 2014 Macbook Air).  No matter what I do, it keeps it wrong.
    Trying to set the photoshop window to the whole Cintiq screen with the "green" Mac OS corner button, this is what I get:
    Hitting F won't do the trick, this is what it gets me:
    I tried to clear the Photoshop prefs, without success.  I checked for updates and found there was a Photoshop update I had not yet installed, and I did install it, to no success.  Needless to say, this makes my copy of Photoshop most unusable, which is a really big problem for an illustrator like me.  I really wish I can solve this as soon as possible.
    Thanks.

    Yeah, no results. Still the same.
    If I take my main window and move it up by myself, it's just gonna stay there until the next click somewhere, then it gets back to this wrong placement,.

  • I dropped my MacBook air and when I dropped the corner where the charger would go dented the charger doesn't fit in it anymore

    I dropped my computer and the corner where the charger would go indented and charger doesn't fit aymore

    Take it to Apple and pay for an out of warranty replacement.

  • Apple Mini-DVI to Video Adapter doesn't fit my aluminum iMac

    I previously had a 17" white iMac (pre-Intel) machine, and about 6 months ago I bought the mini-DVI to video adapter so I could connect it to my television. Worked like a charm. But I recently bought a new aluminum iMac, and the adaptor doesn't fit into the mini-DVI port in the back of the machine. It appears the adaptor and port are both male ends.
    Has the port changed on the aluminum iMacs? The product description for the adaptor on Apple's website says it works with iMac (Intel Core Duo). Isn't the aluminum iMac an Intel Core Duo? I can't figure out why it doesn't fit and which cable I'm supposed to be using instead.
    Any advice would be appreciated!

    Hi Paul
    Yes the Intel iMac [Spec's|http://support.apple.com/specs/imac/iMacMid2007.html] call for the (M9319G/A) Apple Mini-DVI to Video Adapter!
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 19G/A
    The iBook, eMac, or iMac G5 use the Mini-VGA to Video adapter.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=722 C6629&nplm=M9109G%2FA
    Dennis

  • My thunderbolt to firewire adapter doesn't fit the firewire???

    I bought the apple store "Thunderbolt to FireWire Adapter" today.  I'm trying to put my old iMac in Target Mode and move old files.  The firewire cord doesn't fit into it???  I'm sitting here feeling pretty stupid and stumped?

    Your firewire cord is the wrong size.  Apple's cord is 800 port.  What size is your cord? 

  • Mini Display to VGA adapter doesn't fit

    I have an older(2008) MacBook and the MIni display to VGA adapter I purchased doesn't fit my book. Is there one that I can buy that will fit?

    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
    Here's the various types of Mini-DVI to VGA adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_ss_c_1_15?url=search-alias%3Delectronics&field -keywords=mini-dvi+to+vga&sprefix=mini-dvi+to+vga%2Caps%2C272

  • How to deauthorize a computer , that doesn't exist anymore?

    I unisnstalled windows , and for some reason when i inserted my ipod to the freshly installed windows+itunes , and logged on my account , iTunes said , that its a new computer and asked me to authorize it , and so i did.
    My question is: how can i deauthorize my old version of windows , that doesn't exist anymore?
    I also have another question in this topic : When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?

    Take a look at this Apple support article; it may help:
    One computer using multiple iTunes Store authorizations
    When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?
    I'm not sure what you mean by this. What "items"? If you are referring to music, videos or movies, you get only one download per purchase, so if you buy the items again, whether from another device or the same one, yes, you will be charged again. Only apps allow redownloading without additional charge.
    Regards.

  • My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

    My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
    I trieds to go on Youtube and for that I have sound so it is just for the rings.
    Can somebody help me please?
    Thank you so much!
    Mary

    Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
    Just toggle the switch so you don't see the orange and check again.

  • Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    TarahCurrie Sep 10, 2014 3:48 PM
    Restore From Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    MacBook Pro, Mac OS X (10.5.8)
    You are running 10.5.8
    Did you try booting off your Install disk holding the c key down.  From here you can get to the drop down menu just a few clicks in (you are not going to install) and run  the Disk Utility>Repair Disk.  See if it will let you do this.

  • Long text doesn't fit the window exactly

    Hi friends,
    in PO smartforms i have included the header text of PO.
    the problem is the long text doesn't fit to the window exactly i.e.,
    when we enter the text in PO in the header a line can contain only 60 characters approximately where as in my smartforms it can contain more than that.
    so in the display of smart form i get lot of space in the right side and i get the remaining part of text in the next line.
    regards,
    Saravan raj

    hi,
    what u have told is correct but we can't expect the end user to do it each time when they paste the long text.
    is there any option to bring it by default.
    regards,
    saravan raj

  • HT204291 When I airplay my ipad, it doesn't fit the tv screen

    I have ipad air and using toshiba tv. When I mirror the image to the tv screen, it doesn't "fit to screen". Are other people having this problem?

    Welcome to the Apple Community.
    Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
    You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

  • Battery failure although my battery doesn't fit the exchange program?

    hello there!
    i know there have been a lot of threads about the battery life and failures in the macbook pro but i don't know which one fits my case...
    my mbp is a week 13 and has no problems at all. i don't use the battery that often - by now i have 14 cycles.
    my battery's serial number doesn't fit the exchange program but today happened this odd thing:
    i used my mbp on battery for less than two hours and the battery symbol said that i still have about 50 minutes of battery power. all of a sudden it turned off (as described in many other threads) without any warning and i couldn't turn it on without plugging in the power cable. when i turned it on it started from deep sleep mode (dimmed desktop).
    ...of course i did reset the pram and stuff - but what is going on? as i said i don't meet the exchange program for faulty batteries but still it doesn't seem to work proper.
    what can i do?
    thanks in advance, guys!
    j.

    hi and thank you all for your replies so far!
    over the weekend i took some screenshots showing the various total of mAh. i have no idea if that is normal like this? and the battery is behaving normal again, no random shutdown... you can find the images under the following link...
    http://www.propaganda-pixel.de/mbp/mbp.htm
    in addition i added a photo of my magsafe... now that it comes to the battery issue i got slightly concerned if this crimpy cord should be like this (not that this thing starts to melt on me!).
    when i transport my mbp i wind the cord around those two hooks and i never pull the magsyfe by the cord out. but still it looks like this.
    the power cord is from a week 10 macbook pro which i got exchanged for a week 13 but i had to keep the cord...
    i know, this has nothing to do with the battery issue and no, i'm not paranoid - just now that i started this thread i thought i could add it...
    so my questions are:
    - shall i request a new battery considering the various mAh indications?
    - shall i request a new power cord? or does mine look normal?
    why i ask is because i don't want to request something when there is no need for a replacement.
    thank you all!

Maybe you are looking for

  • Why and when can I use the "NotBoundException" in my RMI?

    why and when can I use the "NotBoundException" in my RMI?

  • How to clear the clipboard and empty drawings ?

    Similar question has been in the Sketch Forum for half a year already, with no satisfying answer... My clipboard is becoming an extremely messy merry-go-round. Isn't there even some kind of hack ? And how can I delete cleared or empty drawings from a

  • Document ( no preliminary one )

    Hello... i have a problem... when i create voucher from Tcode F-64 i get a message "Document is an accounting document (not a preliminary one)" when i see it in FBV3... when i have posted it. i can't find it in BSIS/BSAS.but when i run program RFSEPA

  • Trapped With Fusion Order Demo Deployment Problems.

    I have the impression that this FusionOrderDemo_R1PS1 is not sufficiently tested for deployment in different types of environment. Prove it wrong by advising whats wrong on my configuration based on the build output below: pino Buildfile: C:\JDevelop

  • Adobe Form Text.

    In Adobe Form if the contents in the Text box which is embedded in a sub form one page, if text box contents exceeds more than one page then we get a scroll bar in the adobe form, when we try to print this it prints only one page data and the rest of