Headphones=no sound

Because of a worm, I had the hard drive erased. Programs were reinstalled. I now have no sound with the headphones. I can hear a ping when tested, but no sound with music through the headphones. Internal sound seems OK with video with iTunes, Media Player, etc. Adjustments via the sound icon have no effect.

Laptop model is A135-S4656.
Satellite A135-S4656
You reinstalled this driver?
Realtek Audio Driver for Windows Vista
Open Sound in Control Panel. What do you see on the Playback tab?
-Jerry

Similar Messages

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

Did you try different headphones!?
If it's sounding the same thing on different headphones then you might have changed the Left-Right balance
Have a look at Settings -> General -> Accessibility
There's a slider for L-R
If it's in the center then the headphone through which you're facing the problem might be damaged, try twisting the headphone wire of the speaker of the headphone (left or right) where you are encountering less volume.
If it's sounding altogether same on all the circumstances, the headphone jack might be damaged. Get your phone to the Apple Store and book an appointment
Try these steps and it will solve your question

When I use the headphones the sound is distorted

Ipohne 4S - When I use the headphones the sound is distorted

i have the same problem in my iphone, i restored and update but the problem persist. HELP!

The sound of my iphone has dissapeared when I play games and when i listen to muisic but when I put the headphones the sound come back and I can control the sound,what should I do??

I was on a boat ride when some water fell on it but it was just a little bit then when i tried to control the sound and volume while playing and listening to music it didn't showed anything and just with headphones it appeared again and i could listen and I could control it again but when i take the headphones out it goes back to the same thing.What should I do??

try toggling the Ducking menuItem

When external speakers are plugged in to headphone jack, sound randomly goes back to internal speakers or digital audio setting, then back again

I have an essentially new MacBook Pro with Lion and all updates applied, and am wondering if this is a hardware or software problem. Essentially with something plugged into the headphone jack, things work as they are supposed to for a while, then the sound will switch back to internal speakers, or sometimes 'digital out' (I can watch it change in the system settings), and then often switch back. It doesn't seem to follow any sort of pattern or be related to any specific application that could be open, and happens with different sources of audio (iTunes, streaming from the web), and different external speakers or headphones plugged in.

Sounds hardware related. If it's brand new, and you're still under warranty I would have it checked out.
I have not experienced this on my computer.
As I understand it, you have analog RCA outputs from an 1/8" to left and right RCA outputs. when you're randomly using the computer, it'll switch to internal speakers, then to digital audio, back to your stereo analog external speakers.
This should not be happening and if it's happening with streaming content (I am unaware of anything that streams in 5.1 digital audio) then this must be something that an apple specialist should look at and consider.
Does this happen with the headphone jack out? when you hold your finger over the headphone jack area does a red beam come out of it *blinking* or just on? This will be a good indicator that your audio hardware is faulty. are you running HDMI out?

Plugging/Unplugging headphone socket sound balance problems

Hi,
When I plug and unplug a mini jack into the headphone socket (either with a headphone or my desktop speakers) the sound moves over to the right channel. I can bring the balance back in system preferences, but I have to do this every time I unplug. Any solutions?

I would try a NVRAM rest:
http://support.apple.com/en-us/HT204063
If no success, delete the System Preferences plist per these instructions:
https://discussions.apple.com/docs/DOC-4301
Ciao.

In-Ear Headphones distorted sound

Hi,
Yesterday, 21 days past my one-year warranty, the right in-ear phone now produces distorted sound when the volume is raised.
I have replaced the mesh cap as recommended, but to no avail.
It only the right speaker and is directly related to higher volume.
Has anyone experienced this?
If so, what was your solution?
tia,
Bob

hi,
if you own an iPhone 3GS and is covered by Apple Care or limited warranty your in-ear headphones get warranty too
you can even apply for DIY.

IMac headphone jack sound drop

Hi everyone,
My 27 iMac 3.06 GHz is dropping the sound from the headphone jack after a few minutes of playing audio. If I adjust the volume with the keyboard the sound comes back...for a few minutes again. If I use the on-board speakers for sound output the sound never drops.
Is anyone else experiencing sound from the headphone jack dropping on the new 27" iMacs? Any suggestions on what might be causing it?
I plan to take it to the apple store as I am multiple other problems at the moment with the machine, but I figured I would find out if this is an isolated incident or if others are having the same issues (a search of the forums did not reveal similar problems)

I have a whole lab (30) of new imacs and the headphone jacks need a lot to be desired. My headphones all worked on the emacs I had last year; they work on my laptops, but most are crackling and also in some cases causes Type to Learn to actually pause. When I pay $1000 dollars per machine I would think the headphone jack would work. After all how many years now have people been putting headphone jacks in computers? You would think they would have it down perfect by now. But each time I get a new set of macs I have problems: ibooks - the wire to the LCD was being pinched by the hinge - 15 out of 30 now don't work; macbooks- hard drive failures. It is interesting that I have imacs purchased in 2000 that are still functioning as they should - just can't update them past panther in most cases. Will Apple admit this problem with headphone jacks?

Headphone Jack sound quality

When I plug my headphones into the jack, the sound becomes distorted and full of wavering bass. I adjusted the EQ, but the problem remains. What can I do?

Try another pair of earphones.

Headphone issues-Sound Blaster Audigy 2 ZS Platinum Pro, DR release 1.84

I have some issues with my headphones. Before I can plug my headphones in and the speakers shut down and I hear the sounds through the headphones and now when I plug in the headset speakers still stay on and can hear the sounds on both the speakers and headset. Can anyone help with this issue? It would be greatly appreciated!

hello
go to the control panel , "AudioHQ" icon , and select "device control" , and "headphone In" , here you can select your headphone configuration
++++

Headphones -- ticking sound

I have a 5.5G 80gb. Occasionally, and not always, while using the headphones, I get a ticking sound at the root menu. When content starts playing, the ticking goes away and the iPod sounds great (much better than my previous 4G 20gb, by the way).
Has anyone else experienced this?

Either that, or the earbuds will follow me wherever I go;)
sorry, couldn't resist that one.
I suppose it's possible that some dirt got into my brand new sealed earbuds . . .
By the way, in case anyone has dismissed my question, this is definitely NOT the normal clicking from using the click wheel, it's a fast ticking sound.

5.1 Headphones with Sound Blaster Live! 5.1 Digital (De

Hi, I just purchased a pair of Kinyo 5. surround headphones and when I connect them to my Sound Blaster Li've! 5. Digital (Dell) soundcard, the center speaker sounds much weaker than the rest. I'm guessing that the black output on the card board is the rear speaker output, the green one the sides, and the yellow one the center/subwoofer or digital out. Enabling the CMSS setting helped a bit, but it still seems quite weak. Either that or the rear and side speakers are too loud. Is there any way with the card I have to adjust the levels of the side, rear, and center speakers?
-Evan

Try turning on the CMSS features. The sticky at the top of this (Sound Blaster) forum covers the steps on how to enable CMSS or you can check out the Knowledgebase article SID4883 for the steps.
Jason

Headphone audio sounds like it's coming out of a hole?

Two days ago, I downloaded a radio app to my 2nd gen iPod touch. Sounded fine for a while, then suddenly faded. I could hear the music just fine, but the voices were so quiet I could barely hear them. I switched over to regular music and it did the same thing. I fiddled around with my headphones, thinking they were dying, and got it to work by pressing the jack into my ipod hard, putting pressure on it. I figured it was just old headphones and went and bought another pair.
But it's still doing it. Brand new headphones and they only work when I put a crushing pressure onto the jack. What's going on here?

I can't be sure, but it sounds like you have a bad contact in your headphone port. I would take it to an Apple Store to get a new one or call AppleCare to have it replaced.

Activating x-fi headphone 3D sound in ga

Hi,
i recently purchased a extreme music x-fi and all is working fine so far. The feature I was most excited about was the 3D headphone feature. In the Game console settings the effect is amazing.
But, I installed gothic 3 two days ago and was not able to hear the sound in 3D
Should it suffice to activate the 3D feature in the soundblaster console?
The audio settings in gothic can be set to headphones or 5. surround. Which settings do I have to use ingame, to be able to hear surround sound on my headphones.
Or am I forgetting anything important?

I switched the ingame settings to dolby prologic and now I have surround sound although the effect is not quite as good as in the creative console heli demo.
The question reamins:
What are the preferred ingame settings?
And why doesn't the cmss-3d headphone feature work when I set the ingame sound to "headphones" or "surround" or "5." but only in dolby prologic?

Headphone, notification sounds for xperia z2

It is so annoying. Even when i have my phone on silent, the notification sound is still on when i plugin my headphones! how do i turn of notification sound when i have my headphones in!!!!!
Help ME!!!!!!

Yes and no. You have to go back and add a notification sound when done listening. This is asinine. Never had this issue with my 4 other android phones. It may honestly be the reason I break warrenty and just flash Cyanogen

Headphones=no sound

Similar Messages

Maybe you are looking for