Headphones not detected after update to 5.1.1

Hi all, After updating to 5.1.1 my Z3C no longer detects when I plug in my headphones (neither the ones that came with the phone nor others). - Clearing data for Smart Connect doesn't help- Rerouting sound output with SoundAbout does work, but is not practical - it shows the jack itself is not broken, though- Installing SmartKey did nothing- Production week is 15W25, so not from the "faulty weeks" I have not done any "software repair" or factory reset yet. Anyone else experiencing the same issue after updating?

No, no solution. Support asked me to do a "software repair" through the Companion, and if that didn't help I would have to send the phone in for service. I have just gone through the repair procedure, but no luck. I guess there's no escaping sending away the phone, then. Now all I have to do is to somehow find a phone (that accepts nano SIM) that I can use in the mean time - I can't do my work without a phone

Similar Messages

  • Headphones not working after updated ios8

    i have problem after update ios8 my headphones not working.. i reset 3times but still not working. help me! before this ios7 i no have problem with myheadphones

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

  • Ipad not detected after updating itunes 11.1 on windows 8.1

    after updating itunes 11.1, ipad 3g IOS 4 7 GM, not by the system windows 8.1 when connecting usb. When charging from the power supply and it works. What's the problem?

    Correction: iTunes 11.1.0.126, not 11.0.1.126

  • Headphones not ditected after update Xperia Z2

    After I updated my phone to lataste version mycket phone doesn't find my headphones.
    My headphones work fine in other divices and I have tried other headphones to..
    I have cleard all data from smartconnect and uninstall and re install it, but it doesn't work..

    I have tried The headphones that come with The Phone and it doesn't work either.
    My other headphones are urbanears and before The update they worked fine and it came sound from them.
    Now, when I plug in the headphones in to the headphonejack, The phone doesn't detect The headphones. So when I start music The sound come from the phone insted from the headphones.

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

    My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
    Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

    As stated...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere

  • Problems detected after updating to iTunes version 11.1.3.8

    Problems detected after updating to iTunes version 11.1.3.8 for Windows 7 Ultimate 64-bit version, Service Pack 1.
    USB connected iPhone 4 (iOS 7.0.4) is not recognised in iTunes.
    Sluggish response when starting iTunes.
    Any known remedy?

    After updating to the newest version of iTunes which is 11.1.3.8, I can no longer edit song information because whenever I click Get Info, the program crashes. It says, "iTunes has stopped working...". I literally tried all the troubleshooting techniques here but to no avail!
    I already:
    Reinstalled iTunes and other related programs like a hundred times
    Scanned my computer for viruses
    Opened iTunes on another user account
    Opened iTunes on safe mode
    Removed unusable configuration files
    BUT STILL, the problem persists. I have the same version of iTunes on my office computer and it works perfectly fine but I want my iTunes here at home to get fixed. Never had problems with editing song information until I updated it to 11.1.3.8.
    I just don't know what to do anymore. I updated this program last January 1 and until now I haven't found any solution. It's really getting on my nerves!!!

  • Sim card was not detect after upgrade my iphone4s to ios 6.0.1

    my sim card was not detected after i update to ios 6.0.1
    i had ald try many time plug in n out my sim card it keep on show searching no service or no sim
    i had reset my network setting n i reset all n now i cant activate my iphone

    Connect your iPad to iTune (computer) and Check for Updates. Backup before you proceed with update.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/e0f22e92de98ebae10e 3fd537c16619e.jpg

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

  • HELP ME! Nokia 5230 does not work after update

    My nokia
    5230 will not boot after update. I've also tried everything and red green camera button intedruken but nothing worked. Can someone help me I am so on vacation.
    Sorry for my English I am Dutch

    Have a look at this complete guide.. If nothing works, then the ONLY solution is to visit Nokia Care...

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

  • Click to activate does not work after update

    Click to activate plugin does not work after updating to version 23.0.1

    hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

  • WiFi iPhone 4S does not work after update iOS 6.0

    WiFi iPhone 4S does not work after update iOS 6.0

    This sounds more like a hardware issue.
    Have you checked that the dock connector port is not dirty?

  • 3G is not working after updating to iOS 6.1

    My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the phone etc.
    With this kind of bugs in every update, Apple will no more be THE Apple.
    There are bugs which have not been fixed even in the subsequent updates. SMSs going blank being one of them.
    Miss you Sir Jobs.....

    I have since managed to sort mine out - when the phone was updated it wiped out the network settings. 
    I was able to reset them by manually putting the information in:
    Settings - General - Cellular - Cellular Data Network and then I put in the correct details for APN, username and Password in the relevant sections and now it works OK.
    Hopefully it will work for others too

Maybe you are looking for

  • ACR 7.1 Release Candidate Problem

    I just installed ACR 7.1 RC on a Windows 7 Professional 64 bit system and identified an issue relative to how ACR 7.0 works.  When I select an image that was initially converted using PV2010 (CS5) and click on the "!" on the image to change it to PV2

  • Icon for PowerPoint not in list of open apps

    I noticed that PowerPoint (Microsoft Office 2011) does not appear in the list of open apps when I press cmd-tab.  When I view the dock the icon is present but the little illuminated dot below it is missing as though the app is not open. When I click

  • Exporting and Importing music from one compute to another

    I have just downloaded i-tunes onto my Dell notebook. I want to get the same music library from my HP computer on to my Dell so I have the same music. How do I go about that? I can't seem to get the info I need. Hopefully someone out there and help m

  • 1KEK only for AP

    Hi, We are in ECC and not activated new GL and going with Classic PCA. Requriement: Accounts payable side user wants to split the vendor (reconciliation) account based on expenditure items PCA. I know through NEW GL PCA its possible but due to some t

  • Should I be concerned with file sizes of my images I post using iWeb?

    Should I condense and compress my images down so they won't take up as much bandwidth when I use iWeb?