Headphones not registering when I plug them in

Hi there,
I have an iphone 4s and have a problem with my headphones. When I plug them in, the iphone doesnt register that they are there and plays through its own speaker rather than the headphones sometimes. I have tried with several headphones so I know it is the iphone.
It works sometimes and doesnt work some other times. And when it does work, it sometimes  cuts off mid song and reverts to the iphone speaker.
Has anyone else encountered this?
Many thanks

Sounds like there is a hardware problem with the iPhone's headphone port.
Make an appointment at an Apple Store if there is one nearby to confirm.

Similar Messages

  • Since updating to iTunes 11.1.4(62) both my iPhone 5 and iPad Air do not sync.hen I plug them into my lap top directly, using the USB cord, they don't even register with iTunes as being present. I am completely stumped. I had no problem before.

    When I plug my iPhone or iPad directly into my lap top, using the USB cord, the devices don't even register with iTunes as being present. I am completely stumped. I believe this bagan with my last iTunes update. The last time I syced any device was Oct 23, 2013. During that time I bought two new apple products and the same problem, when I plug them in they do not even show up as being available to sync. Any ideas why this is happening?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
     Cheers, Tom

  • Headphones Not Recognized When Plugged in, Internal Speakers Won't Mute

    Hi all, I've scoured these message boards looking for a solution to this problem, but couldn't find a solution that worked.  Hopefully someone can!
    Toshiba Satellite C655-S5312
    Edition: Windows 7 Home Premium, Service Pack 1
    Processor: Intel(R) Pentium (R) CPU B950@ 2.10GHZ 
    Installed Memory: 4.00 GB
    System Type: 64-bit Operating System
    The problem I'm having is that my computer won't recognize my headphones or any other external audio device when I plug them in. The internal speakers continue to play no matter what. I used the jack fine one night and the next morning it wasn't working. I've checked these external devices with other computers and they work fine.  My computer is just over a year old and no longer under warranty, but I can't imagine it being a hardware issue after such a short time of use.    I had this problem before right after I got my computer back from a repair shop.  Turns out the guy didn't reinstall my drivers.  Now, when I tried to follow those same steps, I'm getting nowhere.  I can say that I noticed that the available drivers on the Toshiba website have changed.  Before it was RealTek and now, after updates, it' was SmartAudioHD and now High Definition Audio Device.  I don't know if that bears any significance, but I thought I'd include that anyway.  I've tried uninstalling the driver, but everytime I restart my computer it's there under Audio Device Manager.  Tech Support said that my comp automatically adds the driver so I'll never really get rid of it.  Does that make sense?  
    Troubleshooting steps so far:
    1.) Uninstall and reinstall drivers (restarted my computer after)
    2.)  Control Panel--->  Device Manager---> Sound, Video Games and Game Controllers---> High Definition Audio Device (was SmartAudio before updating driver during troubleshooting)---->right click and "Enable" is checked
    3.)  Control Panel---> Sound---> Playback Tab (in Sound Dialog Box)---> Speakers (HDAD) green check mark but Headphones (HDAD) red downward arrow and "Not Plugged In" (Can enable or test because it's not detected)
    Am I missing a driver?  Am I missing a vital step?  Please someone help me! 
    Solved!
    Go to Solution.

    If you are using Windows 7, go into control panel click on sounds and make headphones default. When you are not using your headphones you will have to do this procedure again to restore speakers on the laptop or computer. I am using Microsoft Gaming Headphones and had to do this because my toshiba laptop did not recognize it was plugged into the USB port. I have no problems with the plain speaker headphones only the ones that plug into the usb port.
    Attachments:
    headphones.JPG ‏74 KB

  • I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either.  I have tried making it louder quieter, restarting my computer, HELP!

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
    3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
    4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
    7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
    9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    10. Reset the NVRAM.
    11. Reset the SMC.
    12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
    13. Make a "Genius" appointment at an Apple Store.

  • Having trouble with the messages on mac my friends using it are coming not registered when i try to send them a message

    having trouble with the messages on mac my friends using it are coming not registered when i try to send them a message

    That's probably because they're not registered.
    Messages only works if your friend has an iphone.
    There is a workaround that can work, though.
    set up an AIM account online.
    in System preferences > mail, contacts, and calendars, enter your new AIM account.
    in Contacts, on your friend's contact card, look for AIM. Enter their phone number right before that, with a +1 before it, and the area code:  i.e., +11234567899.
    This doesn't always work. Their cellular carrier has to cooperate with AIM. Some do, some don't. If it doesn't work, tell your friend to get an iPhone.

  • I purchased a apple av cable and a iPhone dock when I plug them in it says this accsesorie is not supported  by iPhone.any tips??

    I purchased a apple av cable and a iPhone dock when I plug them in it says this accsesorie is not supported  by iPhone.any tips??

    av mean audio video
    audio video can be
    composite
    component
    VGA
    hdmi
    some may not be supported by the older 3gs the page where you bought it should be clear on which items are supported

  • My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones again on my IPod touch?

    My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones with my IPod touch?

    You likely have a problem with the headphone jack.  You jhave to ways to listen to music via headphones:
    - Get the jack fixed.  Here is one place:
    DigiExpress.us - The iPad Repair Professionals
    However first I wold rule out a software problem by try the following:
    Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults.
    The other way is to use bluetooth headhone if you have a 2G or later iPod.

  • TS3274 My headphones don't have any sound when I plug them in with iTunes or any other app with sound. The speakers continue to play. How can I switch over to headphones?

    I can't get my headphones to work.  When I plug them in, the speakers continue to play. 

    There is a mechanical switch that when pressed in switches over to headphone jack.
    It is inside the jack.
    Try pushing the headphones all the way in.

  • When I go to yahoo with my iPhone 6  the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong?

    When I go to yahoo with my iPhone 6  the pages will not enlarge when I pinch them but it works on my iPad. Does anyone know what's wrong? Also the same on boyfriends phone he's eith Virgin and I'm with Vodafone do it cant be the providers.

    Thanks for the link but none of those described the problem. No error message pops up. It just says "Accessing Itunes Store" but it never actually does. This only occurs when my iPhone is plugged in though.

  • My devices aren't being recognized by iTunes when I plug them in, so I can no longer sync.  I used to be able to.  I'm using Windows 7.

    My devices aren't being recognized by iTunes when I plug them in, so I can't sync.  I used to be able to and don't know what's happened.  I'm using Windows 7.

    Hi ngreg62,
    Thanks for visiting Apple Support Communities.
    The steps in these articles can help troubleshoot if iOS devices or iPods aren't recognized in iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    Jeremy

  • My ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer

    my ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • My iphone text tone is not working when I plug in the earphone.

    Hi,
    My iphone text tone is not working when I plug in the earphone.
    My earphone is always plug into the iphone as I use it to answer calls. I notice that iphone does not alert me (sound) when there is a new messages. Instead the text sound is transfer to the earphone speaker.
    As the earphone is plug into the iphone and I am not putting it on always, I need it to still hear the text tone whenever I received new messages.
    Anyone pls help.. the problem still there even I updated..

    goh steven wrote:
    hi wjosten
    I don't put the iphone in my front pocket. I put in my bag pack so vibration is not useful to me. Pls help
    The iPhone is working exactly as it is designed.
    Your options are:
    1) Unplug the headset.
    2) Leave the headset plugged in and the earpiece in your ear at all times.
    3) Turn on vibrate and put the phone in your pocket.
    4) Leave feedback for Apple and hope they deem it worthy of their time to fix.
    This is a user to user forum, these are the only solutions we can offer you here.

  • Battery icon dose not showing when i plug in to usb or power

    battery icon dose not showing when i plug in to usb or power? and not charging when phone is on

    I would try another cable or try the cable in another ios device
    to verify if the cable was broken or your iphones connector is

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

Maybe you are looking for

  • Using the 3 D function the CS 6 operation hangs then closes and restarting CS 6 is required.

    I have tried using the 3D function with some fancy fonts and most of the time all works very well. I noticed the extrusion with Twist and Taper is a bit sensitive and has a quick move to a range that hangs my PC. It has happend a couple of times but

  • AS2 Basic Authentication - Receiver CC

    Hi ,   I would like to know the Basic Authentication field in Receiver Communication Channel for AS2 Adapter . Our Trading Partner has provided with username and Password information but there is one more mandatory field Realm. Any idea what is this

  • How to import GreenSock external classes?

    Hi, I'm having some problems in importing GreenSock external classes into my flash project. Line 27: import gs.*; Desktop\myFlashAPPS\twitter\src\zainu\twitter\MainClass.as, Line 27 1172: Definition gs could not be found. Here is the directory tree:

  • HTML in Gmail - does this work?

    I believe I have recieved mail to my gmail account from other gmail users with basic html formatting including links using etc. However, I tried a test and it does not appear properly - the codes show up in the received mail, they are not transalted.

  • Quantity and Price block on MM docs not appearingin MRBR list

    Hi Gurus Even if there are quantity and prices blocks in the MM doument , the MRBR list doesnot display the blocked documents. As a result we are not able to release the documents and remove the block. What could be the possible reason for this? And