Headphones not working in vista

for some reason out the blue my headphones no longer work when connected to my logitech X-540 jack on that corded volume dial. i am for some reason getting "high definition audio device" as a selection, but can not select xfi at all. i am very confused as to what is the issue. I installed the latest drivers. everything is up to date on vista so that is not the issue. my motherboard does have a onboard sound device. but i dont have drivers installed for it. is there any reason why this would be happening out the blue? any solutions?
i own the ASUS M2N SLI-Deluxe motherboard and xfi extremegamer card.i am frankly a bit frustrated as i cant enjoy my music with my headphones.

Hi,
Are you getting sound from your sound card?
You can get in touch with support via this link.
Message Edited by KokChoy-CL on <span class='local-date'> 09-0-2008<span class='local-time'> 02:49 PM

Similar Messages

X-Fi Audio - Subwoofer NOT working in Vista 32-bit Ultimate!

<X-Fi Audio - Subwoofer NOT working in Vista 32-bit Ultimate!I I have WIndows Vista 32-bit Ultimate and Sound Blaster X-Fi Audio installed and with the factory drivers (I tried another set earlier and they did not work, so I reinstalled the original drivers which worked, at least partially). Until now I only listened to music using my headphones, but I tried today to plug-in my 5. Genius system (50W RMS) and everything works fine EXCEPT the subwoofer does not produce any sound at all!! The ONLY way to make it work is go to Control Panel -> Sound -> Speakers -> press Configure and then click the Test button in the dialog that appears (or click the subwoofer icon to make it produce a very nice bass sound - which I absolutely love, but it's the only way to make my subwoofer work!!!). Please guys, help me find out what the problem is. All help is much appreciated. Thank you!

cipriansk7 wrote:
Thank you my friend,I have done as you have mentioned (made sure the DLL did not stay there when I rebooted before I installed your version), and now I have the version which you have built. However, I am still unable to hear the subwoofer I am so sad... even my default on-board card supports the 5. just great, and I love the sound of that, but I was hoping for something better from Creative - instead, all I got was a soundcard I can only use with my headphones at the moment because of a faulty driver...
Did you enable Bass Redirection?
Run Console Launcher, click on Speakers and Headphone -> choose 5. Speakers.
Then click on Bass (Bass Management) and enable Bass Redirection.

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

4gb creative zen v plus does not work in vist

hello
i just got one of these..and the cd provided does not work in vista..i read on the site that this model has nati've vista support then why doesnt it work for me?
any help appreciated

Hi,
What do you mean by the cd does not work in vista?
Can you tell us what happens when you try to install using the installation cd, error messages, etc?
Try plug in your Zen V Plus to your computer, does it get detected?

Lumia 630 dual sim headphones not working

After denim update on lumia 630 dual sim headphones not working properly in india

Hi, kingpawan. Is the issue the same when you're using another compatible headset? Are you experiencing this when you're watching a video? Did you happen to check if the phone's system settings are all updated? To do this, go to Settings > swipe to applications > store > check for updates. We'd love to hear your response. BTW, welcome to our community!

Quick Install not working on Vista - how can I transfer pdb files to/from my Zire 31?

I have been using Hot Sync to transfer contacts, calendar etc, but am unable to transfer my database files (pdb format) to/from my Zire 31, as the QuickInstall program does not work with Vista, and I am not aware of any other method of transferring these files.
Can anyone help?
Post relates to: Zire 31

Oops, sorry for the bad link (the must have changed it). For some reason, I can't create a valid link to the article...grr. But you can also get to it by entering Solution ID # 43851 at the bottom of the Palm Knowledgebase.
To move the file from the card to your Zire's memory, use the Copy function in the main Menu. That is, insert the card. Open the menu from the main Launcher (home) screen. Select Copy, and you should be able to select the card as the source.
Hope that helps clarify. Let us know...
Post relates to: Centro (AT&T)
Message Edited by smkranz on 08-26-2008 07:55 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Headphones not working after updated ios8

i have problem after update ios8 my headphones not working.. i reset 3times but still not working. help me! before this ios7 i no have problem with myheadphones

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset

Headphones not working on new 4s. Any ideas?

Headphones not working on new 4s. Any ideas?

When in system preferences/sound/output do you see the headphones there? If so select them.
Try plugging the headphones in and out several times (there is a micro switch that can get stuck)
Try toggling the volume keys while plugging them in.
Try restarting with them plugged
Trya pram reset: with nothing connected
Power off, power back on holding the following keys:
OPTION COMMAND P R
continue to hold till you hear the start chime 2 times then release, rebbot.
If still no joy take it back to the Apple store, you have 14 days from the date of purchase to swap for another machine, or a refund, or have them fix it. Take full advantage of your warranty.

Satellite Pro A200-18P - microphone / headphone jack not working with Vista

Hi,
I have installed Windows Vista onto this laptop which was originally an XP, but I have not got the headphone jack working.
How do I turn it on or do I have to download it from toshiba website?

Hi
First of all you have to check if there is an special BIOS for Vista.
As far as I know some A200 series needs BIOS which was released especially for Vista OS.
I think the notebook needs Realtek sound driver.
Therefore in control panel you should see the Realtek HD audio manager.
Go there and you will see the mic and headphone jack on the right.
Click right there and check if there are some settings which have to be enabled.

Headphones not working in bootcamp macbook pro 13"

i install windows vista business in bootcamp, Macbook pro 13" 2009. The headphone is not working and the speaker is really low. Anyone have the same problem? thank you

Have you installed the Boot Camp drivers in Windows from the Mac OS X Leopard DVD? If not please try that. Also can you increase or decrease the sound in Windows? Which is the sound output device in the Windows?

Headphones not working in bootcamp

I installed windows vista bussiness in bootcamp,(macbook pro 13" 2009) the headphone is not working and the speaker is really low. anyone have the same problem ?

Have you installed the Boot Camp drivers in Windows from the Mac OS X Leopard DVD? If not please try that. Also can you increase or decrease the sound in Windows? Which is the sound output device in the Windows?

ITunes v7.6 still NOT working w/Vista 64-bit

I believe it's not working because AppleMobileDeviceSupport.msi WON'T install.
It gives me a "The installer encountered errors before Apple Mobile Device Support could be configured." error.
Is there ANY WAY around this at all?
Also I've installed & uninstalled iTunes v7.6 multiple times now, rebooting between installs also but still no luck.
I've also extracted the 6 installation files out of iTunesSetup.exe and I'm trying to get AppleMobileDeviceSupport.msi to install, but it just won't install.
When I start the iTunesSetup.exe package and finish installation, iTunes Setup Assistant also gives me a warning that says "iTunes was not properly installed. If you wish to import or burn CDs, you need to reinstall iTunes."
And under Event Viewer I see this "Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 1.1.3.26. Product Language: 1033. Installation success or error status: 1603."
Help please! I would really like for iTunes to work with my iPhone!

Well at least up and til today, there never was a solution to activate or even synch Vista 64 bit OS, iTunes, and the iPhone - for anyone, anywhere - period. Not unless you used some VMware solution (which I've heard mixed results on).
This new version of iTunes (7.6) did today for the first time, correct the ability to burn CDs from my collection of music in iTunes. Before this version it wasn't possible.
My Mobile Device Support program did update and install correctly today along with the other apps that got updated. So now I wonder if it is truly possible to activate and synch with an iPhone?!? Anyone try this yet?
Cyanide regarding your install, I had to go through something similar back in one of the earliest versions designed for Vista 64bit OS. The trick is not only uninstalling, but removing all references in the registries, left over file folders, etc. after uninstall. Then begin a clean install.
BUT, it's entirely possible that the iPhone still is still not capable of syncing with Vista 64 bit.
If you think you've had this ability before, than I'm 99.9% sure you only have Vista 32 bit OS.
Reference this thread for more info - towards the bottom...
http://discussions.apple.com/thread.jspa?threadID=1319119

Mini DisplayPort to VGA adapter not working under Vista (Boot Camp).

Hi there,
I'm facing a very serious issue with MacBook Pro Unibody running MS Vista under Boot Camp: using the Mini DisplayPort to VGA adapter to hook a projector is 95% impossible because the only resolution available is 640x480 or sometimes 800x600. No solution came from the adaptor firmware update, still same behavior: connecting the external projector/monitor toggles 640x480 resolution with no more choices available. Just 5% of attempts on selected projectors gave me access to the complete resolutions list.
This is having a serious impact on my job where I do need both Mac&Windows running natively and with external display capabilities, please I'm looking for some feedback from users facing the same problem or someone who had an official answer on this issue from Apple. Do avoid posting about using modded display drivers please: I know they exist but the adaptor should be working with original ones.
I can understand Apple does not support MS Vista issues but this seems to be a hardware/driver one.
I'd like to point out I'm using a clean Vista installation with Apple drivers (from the Leopard DVD) and I've run Vista (same version, same gfx drivers etc) under Boot Camp on my previous MPB (with integrated DVI output+adapter) on hundreds of different projectors with never a single problem.
Any feedback is really appreciated.
L.

I'm having the same problem. When I try to connect to the switch in our conference room (connecting both a flat panel display and/or a projector, both with much higher native resolutions), all I get is 640x480. This is a huge problem to using bootcamp, and I really need to get this to work. I was able to get a higher resolution 1280x800 on a separate, portable display, so I'm wondering if people have the problem with standalone projectors or only with projectors connected to some sort of switch, in my case an Extron MPX423A. I have also tried this in both Windows Vista (32-bit) and Windows 7 RC1 (32-bit), with the bootcamp drivers and the latest NVidia drivers, and the behavior is the same all around.

AUDIODG.EXE hogging 80-100% of CPU and sound not working in Vista . . .

I posted this on a Microsoft Answers Forum but none of the techs or people reading have been able to help so far. I'm dying to get to the bottom of this:
Here is my computer:
MSI K8N Neo4 Platinum
AMD Athlon 64 3000+
2GB RAM
XFX GEFORCE 6600 GT 128MB DDR3 DUAL DVI & TV OUT (PCI-E)
200GB WD SATA HDD
500GB WD HDD in external enclosure via USB2
NEC ND-3520A 16X DVD±RW Dual Layer DVD Burner
LG CD Burner
I've been using Vista Home Premium successfully for some time. Recently, not too long after I did a clean wipe of my OS, my audio would stop working. The way it would happen is that everything would work fine until I started iTunes or another audio application and when I would hit play, things would lock up.
Upon inspection of my system resources, I'm noticing that the audio platform for Vista, via the audiodg.exe, is using close to 100% of my CPU resources, even when the computer is making no sound at all.
I've had a Sound Blaster Live! card in my computer for some time but I was not using it; I use the Realtek AC'97 audio drivers that are on my motherboard instead. I thought that the conflict may be the computer wanting to recognize my Sound Blaster, so I took it out of my computer but the problem seems to be worse.
Are there any BIOS setting that need to be adjusted for my sound to start working again?
I'm very reliant on the audio processing power of my computer (I'm in the radio industry, part-time) and this is a huge drag on my productivity.
Any tips would be much appreciated.
REPLY #1:
Thank you for using Microsoft Answers forum. I suggest going to the manufacture of your sound card and download the latest drivers and install them.
MY RESPONSE:
Good suggestion. The problem is this:
I am running on-board audio. I have an MSI K8N Neo4 Platinum motherboard which runs "Realtek ALC Series AC97 Audio Driver" and there is no version for Vista. They have a version for Windows 2K/XP and one for Windows XP 64bit.
Should I use on of those and if not, then what?
UPDATE (from me):
I took a chance and found a Realtek AC'97 driver for Vista.
http://drivers.softpedia.com/progDownload/Realtek-AC-97-Audio-Codec-Driver-Vista-6183-Beta-Download-18114.html
I went to install it and the install hung. So, I closed one of the install windows and then the InstallShield app continued like it was working. So, I hit "Restart my computer". Well, the reboot hung too. So, I reset the PC manually.
When the computer came back up, the sound worked. Hard to tell if this will fix it for good but it's promising. Chaotic. Unpredictable. Annoying.
REPLY #2:
Before you tried updating drivers, did you try rebooting 1st?
I'm just trying to determine if rebooting your system is what resolved the issue - thank you
UPDATE II (from me):
My computer is behaving the same way it was before. AUDIODG.EXE taking up 80-100% of my CPU and the sound not working.
Any other ideas?

Small update: Despite my intelligence, good looks and vast experience I use Google sometimes. To my surprise this file turns out to be a Windows one. Here is someone who is much happier, and since it is some way in my line of thinking I'll quote it, but you might take my previous advice as well:
http://forums.techarena.in/windows-vista-performance/1012315.htm
"- Open up msconfig.exe > Manage startup programs.
- Disable ALL Realtek entries
- Close msconfig.exe
- Right-click on the speaker icon > Audio devices > Speakers (properties)
- Go to the enhancements tab
- Check the box to disable all audio enhancements
- Close the menu
- Right-click on the speaker icon > Recording devices
- Disable all your microphones (yeah..., the actual problem seems to come
from voice inputs rendering..)
- Close the menu
- Restart your computer"

Headphones not working in vista

Similar Messages

Maybe you are looking for