Headphones not working properly?

So my headphones aren't working properly on my iPad however they only don't work in one ear. I don't know how to fix it but I do have the sound balanced between the left and right ear. The same thing happens on my phone (5s) and MacBook. The more specific the better.

was just in a store w the same prob, was told it happens pretty frequently as the headphones are streching out the pin inside, and as long as ur still w in ur 1 yr warranty they should swap u out for a new on the spot.

Similar Messages

  • Headphones not working properly, i need to contact apple

    Hi! My headphones are not working properly and I need to request new ones from Apple but I do not know how to contact them through e-mail, I couldnt find such an option in the support pages, I also need to ask them an issue about my warranty. I can not use the chat help option because somehow I can only select ipod shuffle and i do not even have it, why are chat pages only for ipod shuffle? Anyway, I'll be glad if somebody tells me what to do to contact them by mail. Thanks!

    There is no email tech support, for new headphones you fill out a service request.
    You can arrange online service here.
    Service request.
    To check the status of your warranty, go here.
    http://www.apple.com/support/

  • Factory headphones not working properly

    Sound only works on right side, have to move around the jack for both sides to work. Had same problem with new headphone my brother bought.

    There is no email tech support, for new headphones you fill out a service request.
    You can arrange online service here.
    Service request.
    To check the status of your warranty, go here.
    http://www.apple.com/support/

  • Lumia 630 dual sim headphones not working

    After denim update on lumia 630 dual sim headphones not working properly in india

    Hi, kingpawan. Is the issue the same when you're using another compatible headset? Are you experiencing this when you're watching a video? Did you happen to check if the phone's system settings are all updated? To do this, go to Settings > swipe to applications > store > check for updates. We'd love to hear your response. BTW, welcome to our community!

  • My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • My headphone model number "MDR-XB30EX" is not working properly can it be repair?

    My headphone model number "MDR-XB30EX" is not working properly can it be repair? One of its head jack is not working, no sound at al. 

    Hi kashiffriends10,
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • I have Problem with ringer of my iphone 5S it is not working properly?

    The ringer Of iphone 5S is not working properly, it sometimes misses the ring & play some annoying tunes Plz help me out...!

    I checked my headphones with my ipad and my macbook aswell, the problem exists in the headphones with all these devices as well. So how do i claim warranty, should i approach AT&T store or Apple Store

  • Auto-Brightness on iPad mini Retina is not working properly.

    Hello! Noticed that the Auto-Brightness on iPad mini Retina is not working properly.
    It works correctly only when such a dark place, then unlock the iPad brightness will be at a minimum. Likewise, if unlock iPad in a room with light, the brightness will adjust to the surrounding space.
    If I turn light into a dark room, the brightness slider does not move, and stands on the site. Checked on the iPhone 5S, there problems are not present. Auto Brightness is working correctly.
    P.S. Sorry for my bad english!

    Godly19 wrote:
    iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
    iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
    The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't.  Any ideas on what is wrong with it and how to fix it?
    The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
    I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
    And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

  • My IPOD classic headport is not working properly.  The sound is going in and out?

    My ipod classic headport is not working properly.  The sound keeps going in and out.  I have tried changing headphones and checking the settings.  Does anyone have any ideas?

    Do a Hard Reset
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

  • TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

    My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

    if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
    like this the detector just is stuck in the opposite way
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    iphone stuck in headphone mode

  • Earpiece not working properly in n82

    I have a black n82 which i have been using for last 5 months. Recently i have noticed that the earpiece is not working properly whenever i get a call or make a call it becomes mute for a minute or two and automatically starts working . Though everything is fine when i use headphones or the side speakers. I have tried blowing air in the earpiece bt in vain. last month i had updated the firmware and looks like this problem has occured after that only so not sure whether its  hardware related or s/w related.
    Any suggestions ??

    Hi, I have exactly same problem also so can any body help me plz, i dont like any set than n82, plz send me solution on my email
    Moderator Note: E-mail address removed. It is unwise to publish personal contact information on a public web forum.

  • Phone Controls Not Working Properly In my Lumia 930

    Dear Sir,
    I'm Using a Nokia Lumia 930 phone, just purchased a month ago. for the first time i on my phone, there were few o/s updates appeared and i made a update. when I plug my headphone to the phone, controls are not functioning properly. the button in the headphone
    not working and sometimes it works but i tried with other Lumia device with my headphone, it's working perfectly. Please give me a solution.
    Thanks

    For help using Windows Phone please post on the Windows Phone forums on
    http://answers.microsoft.com .
    The Tools for Windows Phone development forum is for developers to discuss writing their own Windows Phone apps.

  • Left headphone not working

    i have phisical damage to the itouch (2 small dents in the back metal part)   the left headphone is not working properly,  i have tryed serveral differnt headphones so its deffintly the actuall ipod.   I still have it coverd with apple care but i dont know if they will replace it because there is phisical damage. 

    If sound like your earphone jack needs to be replaced or adjusted. 

  • My laptop speakers are not working properly so wanted to visit service centers of hp in london

    from yesterday night my laptop HP pavilion g6 speakers are not working properly. out of many only one speaker is working so i want to visit authorized service centers so that i can fix the issue.

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp56001-56500/sp5646​0.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if this has had any effect on the audio issue.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • MacBook Pro with retina display battery question

    I recently bought a 15" macbook pro with retina display, and was wondering if my battery is working as it should. I usually get about 3:03 hours with brightness at full and keyboard backlight at full with skype (not using it but on),safari with 6 tab

  • How to "hold" a title across several seconds of video?

    Hi -- I'm using Imovie '08 (ver. 7.1.4) on my MacBook pro. And I'm having a problem with titles. I'd be grateful for any insights. 1a) I was able to edit a short video (30 seconds) that I made, but am unable to have a title (1/3 down the page) that "

  • BPEL issue in getting a response

    Hi All, I am using a BPEL composite which is storing a file and after uploading the file sends  back a message and status of the file upload. The file is uploading and it is also sending response which has both msg and status. But in my BPEL composit

  • Unable to see the buttons in the providers

    hi I have created new Providers in Portal .The places where edit, help etc buttons should be seen I am getting null written at that place. Please provide some help thanks in advance dhawanmayur

  • Add eSata to Intel iMac (Early 2008)

    Would it perhaps be possible for me to add eSata to an Early 2008 iMac? System profiler only shows 1 esata port, and it has my internal plugged in to it. I've searched Google and found a few people who suggest that it's possible, but I can't find any