Headphones sound distorted

I bought a "monster" adaptor at the apple store made for the iphone so I could plug in a more comfortable pair of headphones. (My earbuds that came with the phone work perfectly fine)
The problem is, when i listen to my iphone's ipod....the sound is distored. You can make out the songs but only hear part of the words.
How can I fix this?

I am also (just today) having iPhone distortion problems, and it is a hardware problem, regrettably.
My headphones popped out as I was reaching into my pocket, but upon re-entering the pin into the iPhone jack, lo, the sound had mysteriously become awful. If you need a qualification -- digitally distorted. I instantly recognized this was NOT going to have a quick solution.
My headphones, and the adapter, are not the problem. The problem is a) the files have been corrupted/altered due to a hard-drive problem (really hard to believe), or b) the connecting cable running from the headphone jack to the main board has loosened.
Though I believe it is the latter, I can't explain why I can hear something at all, nor why the resulting music sounds like a heavily (e.g. 32kbps) compressed mp3 file. All I know is that I really want to be wrong on this. If I have to get another fff device from this company **shaking fist** Very tired of rapidly depreciating technology purchases. Very, very tired.
Anyway, I'm going to do a fac reset just for kicks, place a file on the device, listen to it, and upon hearing awful distortion, I will dry my eyes and call Apple...Email Apple..or Check back here.

Similar Messages

  • Ipad's headphones sound distorted

    I have new iPad and it works well. The speakers sound nice. Only, when I plug in any type of headphones, they sound distorted. It does not make any difference if it's a song or a movie. Anyone has any idea why this might be happening and what should I do about it?
    Many thanks.
    Eduardo.

    Bencio wrote:
    I have new iPad and it works well. The speakers sound nice. Only, when I plug in any type of headphones, they sound distorted. It does not make any difference if it's a song or a movie. Anyone has any idea why this might be happening and what should I do about it?
    Many thanks.
    Eduardo.
    Sounds like you have a bad connector for headsets, especially if have tried several different ones. You might want to head over to your local Apple Store to get it replaced.
    I also disagree that the speakers sound nice, but that's just a personal issue!

  • USB Headphones, sound distortion in iTunes

    Hi,
    I recently purchased a set of Logitech ClearChat Pro USB Headphones. They do have a specific driver, and are automatically installed when you plug them in. I run 32 Windows Vista.
    The sound when listening to music or video through iTunes crackles and pops some. Listening to the same files in Windows Media Player yield no such distortion. I imagine it must have something to do with an audio codec or some quicktime setting, but I am not good enough to know where to start messing around.
    Any ideas?
    Thank you,
    Andy

    Hi,
    I have same problem with my iTunes 6.
    You can try this(Helps for me):
    1. From the Start menu, select Settings and open the Control Panel
    2. Double-click the Multimedia or Sound, Speech & Audio devices icon,
    3. Select Sound and Audio Devices, click the Advanced Audio button
    4. Select the Advanced tab then
    5. Select the Performance tab and find the Hardware Acceleration slider control
    hardware acceleration should be set at full.
    sample rate conversion quality should be set at best.
      Windows 2000   AMD Athlon XP 2500+

  • Music coming from headphone sounds distorted.

    This is a 1st Generation IPod Touch. Changed headphones 3 times but music sounds as if it is a well. Can the headphone jack be replaced?

    I would take my iPod Touch if I were you and go to an Apple store and have them look at it. You could go to the Genius Bar and have them fix it up for you. I hope you get your iPod fixed!

  • Sound distortion of everything through headphones

    I recently upgraded my 3GS to IOS 5.1, and now everything through headphones sounds really distorted, i've found loads of answers saying check your itunes files and such, but it's not just my music, I tried Youtube and games through my headphones, and they all sound the same, they're all really badly distorted.
    Can anyone help with this? It's really irritating.

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
    Note: You will not lose any data
    Is it the same without the headset?
    Did you tried a different headset?

  • Output sound distortion when USB Mic Connected

    Hi everyone,
    Really appreciate anyone’s help on this sound distortion problem.
    I have been using the new 2014 iMac 27' for last 8 Months, bought Brand New, and recently updated to Yosemite. Everything worked fine including recording, until this update.
    I'm using Blue Yeti USB Mic for recording, and few days after the update I was trying to record in GarageBand and the output sound (via headphone connected to USB MIc) started to distort and then suddenly dropped the bitrate/ sound and I could only hear some clicks. I reinstalled the GargeBand, still its the same distortion happens. The sound gets back to normal, only for few seconds, after I unplug the USB cable from the Mic device. And I tried changing the bit rate and again sounds starts to drop after few sec. This happens only when I connect the Blue Yeti USB Mic and sound output from the Mic itself. Same thing happens with iTunes as well. Output sound from Internal mic and speakers are working fine as normal.
    I tried connecting the USB Mic to my Windows laptop and its working fine with the Cubase 5 without any problem. So the problem is with the output sound, when external Mic connected.
    I don’t know the solution for this. Have checked on every single blog/ thread, sill couldn’t find the answer I’m looking for, to fix this.
    It would be great if you have any kind of a solution for the same.
    Info : FYI
    Mac
    OS X Yosemite: Version 10.10.2
    iMac (27-inch, Late 2013)
    Processor : 3.2 GHz Intel Core i5
    Hard-drive : 1 TB SATA Disk
    Ram: 8 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GT 755M 1024 MB
    Built-in Output:
      Default System Output Device:       Yes
      Manufacturer:                                  Apple Inc.
      Output Channels:                             2
      Current SampleRate:                      48000
      Transport:                                        Built-in
    Yeti Stereo Microphone:
      Default Input Device:                      Yes
      Default Output Device:                    Yes
      Input Channels:                               2
      Manufacturer:                                 Blue Microphones
      Output Channels:                            2
      Current SampleRate:                      48000
      Transport:                                      

    Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
    A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution.

  • Why am I getting sound distortion when connecting iPad 2 to amplifier.

    I am getting sound distortion when connecting iPad or iPod thru amplifier using AirPlay or 3.5mm to rca cables. Also the sound has far too much bass. No problems when connected in car.

    It sounds like a mismatched impedence.  What are you connecting to?   the output from the jack is intended for headphones, and is not just an audio out.
    Try turning the volume on the pad way down, and use the gain on your amp, and see if that minimizes the issue.
    There is a pure audio signal for both channels on the 31 pin plug, but you would need a special cable to use it.  I would bet they are available if you google.  Although I have read that the 31 pin signal is not filtered like the headphone output, so while it is a pure audio output, there may be some noise in it that would need to be filtered.
    Try google for a 31 pin cable.  ( the input for the car is probably built to take a signal from a headphone output, while your amp may be expecting a lower power signal)

  • Sound distortion every 20 sec on Satellite C

    When listening to audio both with and without headphones, every 20 seconds or so the sound output becomes distorted for several seconds and in some cases this sound distortion also causes the computer display to freeze completely.
    My PC is a Toshiba Satellite series C running Windows 7.
    Any suggestions please?

    >every 20 seconds or so the sound output becomes distorted for several seconds and in some cases this sound distortion also causes the computer display to freeze completely.
    This looks a little bit like system freeze.
    In such case some processes which are running in the system background load the CPU and this cause short system freeze.
    Possibly you have installed a lot of different applications and therefore its mostly impossible to say what software could be the troublemaker at the other hand it would be interesting to know if you ever try to reinstall the system and to clean the HDD.
    A new OS installation might be the key.

  • Music sounds distorted

    Ok, so someone stole my 30gb video ipod. I was able to get a 60gb video ipod from a friend. I plugged the 60 gb into my itunes that i was using for my old ipod and transferred all of my songs onto the 60gb. However, now when I play songs on my 60gb the songs sound distorted but they weren't that way on the 30gb....
    So, is it a problem with my itunes (trying to load too much at one time), or is it a problem with my computer (computer too slow to handle all that activity at once) or is it a problem with the ipod itself?

    Sometimes iTunes won't be able to handle a lot of music (50 or more) so try not to transfer big hunks of music. Also check to make sure the EQ isnt on like Bass Booster of something, set it to like off or flat. This is not a problem with your computer. If that doesn't work, it could be a problem with your headphones. Sorry to hear that happened to you.

  • Horrible Sound Distortion with Creative HS-950

    Hi, I recently bought the HS-950 USB Gaming headset. About 4 hours into gaming, I experienced an unpleasant sound distortion that made everyone on Vent Sound slowed down. I unpluuged my headset and a few hours later I had the same problem. After reading through the forums I have gathered this is a Major problem. But is there a Fix?
    I am running Vista 32bit and using Realtek HD sound.
    Thanks,
    Vortexx.

    I'm having the same problem .. horrible sound quality (headset OR headphone mode) on a MacBook Pro with built-in Bluetooth. I've got the latest & greatest update of Leopard too.
    Headset works great with my cell phone (no distortion).
    Will keep looking. Someone please post if they see a solution.
    Here's one possibility, although it says it is for Tiger and requires some command-line manipulation (not bad, but I don't expect to have to do this kind of thing on OSX):
    http://www.skyhorse.org/2007/09/a2dp-aka-stereo-bluetooth-on-mac-os-x-finally-an -easy-and-quality-solution

  • Using Airport Express and music sounds distorted.....

    I just hooked up my airport express to my whole house stereo and the music sounds distorted.  I've adjusted the volume on the amplifier, the room volume control and the computer volume control.....and it still sounds distorted.  Any ideas on what I can do?

    Temporarily, plug a pair of headphones into the AirPort Express and check the sound quality. It is OK, you know that everything is working through the AirPort Express.
    Often the audio plug will make poor contact with the audio jack on the Express which can cause a hum or intermiitent audio signal. Wiggle the plug around to see if this might be the case. You may need to try another audio cable.
    Make sure that you are not plugging into a PHONO input on the amplifier. You would want to use AUX or CD or even TAPE would work if you have an older amplifier/receiver.

  • Audigy 2 ZS platinum sound distorted and muff

    Too bad one cant rant as one might like in this forum. Had writtend all the details that transpired but when i pressed the submit post, my original post was lost due to expiration of time for my ticket.
    Now, i use telegraph details.
    Bought Audigy 2 ZS platinum, bad sound Distorted and muffled from the speakers except center speaker and no sound at all from rear center speaker. Same setup using Audigy Platinum, zero problems.
    Using
    Asus a7n8x-e Deluxe MB
    024GB PC3200 Ram
    ATI 9800 Pro AIW
    Sound blaster Audigy 2 ZS Platinum
    Creative DDTS-00 Decoder
    Creative Inspire 6600 Speakers/Creative Inspire 5300 Speakers

    Fabrizziov,
    Is the sound muffled and distorted when you plug headphones into the headphone out on the platinum dri've? If not, plug the headphones into the sound card's front output and run a speaker test to see if it is muffled and distorted from there. If it is then it is most likely a problem with the card's hardware. If this is the case I would suggest exchanging it for another through your retailer. You can also contact support for a repair if needed. Their contact information is at http://us.creative.com/support/custsup.
    Jeremy

  • Headphone sound mono and muffled

    Aspire R7, Windows 7 - 64bit. Intel mainboard with nvidia graphics card.
    Use to work, but after re-installation and later updates, it suddenly didn´t.
    Sound, video and game controllers show: Intel Display Audio driver and Realtek High Definition Audio driver.
    Playback devices only show "Speakers". It used to show more. And if Intel Display Audio driver is uninstalled, then Playback devices will show 2 HDMI digital devices, but then Speakers become mono.
    In realtek HD Audio Manager -> speaker configuration there´s only stereo. There used to be surround, 5.1 and 7.1 also.
    Installing the latest realtek driver does not change anything.
    Installing the latest Intel HD 4000 graphics driver is impossible. Others have on intel website reported the same problem, that the intel 4000 HD installer alerts that the computer doesn´t match the driver.
    Nvidia HD audio can not be installed. Don´t recall if it did or that was another computer.
    But headphone sounds are muffled and mono, and when plugged in there is a popup selection of "Speakers", "Headphones" or "Headset": If "Speakers" are chosen then the voices are completely cut, if "Headphones"
    are chosen they can be heard but distorted. And if "Headset" are chosen they appear clearer, but still muffled and in mono.

    Hi,
    This issue can be mostly caused by drivers. The driver issue can also cause the unstable performance of hardware device.
    I suggest you uninstall all Video card and audio drivers, and update Motherboard driver and BIOS firstly.
    Then, in device manager to install the driver for Video card and audio device.
    If it doesn't work, check the event logs in Event viewer to see if there is any related recorder. Post back for our research.
    Kate Li
    TechNet Community Support

  • Sound distortion when using hdmi cable

    HP G62 notebook pc(Laptop) windows 7
    I have sound distortion when i connect laptop to pc using HDMI cable, happens after 10 minutes then sound is ok again then 10 minutes later sound distortion again. Sound on laptop is ok. Not HDMI cable because used other laptops and its works fine.

    I'm having this issue as well. Just posting to let people know there is more than one person with this issue. I have a pavilion dv5 laptop

  • Sound Distortion playing DVDs with Audigy2 Va

    Last time I have problems playing DVD movies on my computer: The sound is distorted
    by scratches like an old vinyl. I am using a SB Audigy 2 on Win XP. I have tried several software DVD players, reinstalled the old drivers from CD and cleanly installed teh newest drivers via internet auto update. I also tried to update my VIA chipset drivers, deactivated several background programs etc.
    I found out that disabling the sound acceleration in DXDiag removes the sound distortion but then the sound (speech, effects) within a movie are extremly quiet compared to the music.
    Another thing: First I deinstalled completely the software and drivers from my audigy to replace it with new ones. Then I had to notice that the new Audio Control Center does not support the option to send bass-frequencies to my subwoofer. I could set the speakers to 5. but had no chance to get my subwoofer working. At the moment I have status quo by using new drivers, but my old creative applications for configurating my speakers.

    Ijust checked the preferences, go to Disc Setup and on the bottom in the Audio section, check off the box that says "Disable Dolby dynamic range compression" see if that helps.

Maybe you are looking for

  • How to setup Supp Life Coverage reduction with age

    Hi All, Ravi, We have a problem with Supplement life coverage dropping on non flex program window when there is a reduction in age. When somebody moves from 64 to 65, the benefit won't show up on non flex window after starting a LE (open enrollment)

  • How to create backup Folder Index (or directory ?)

    Okay, I've searched a lot of the Forums and haven't found an answer to this question. Does anyone know if there is a way (or a piece of software) to essentially make a folder from a Hard drive (be it internal or external) that has all of the informat

  • Populating Description in different language

    Hi, While Creating a material i want to populate the material description in different languages (German and Chinese). But the problem is how to convert the description in different languages in program. Is there any function module available for tra

  • I-DVD created DVD will not play back on i-Mac 27"

    The i-DVD Tutorial says "When you have burned your DVD, you will have your own DVD that can be played in any DVD Player or any DVD-EQUIPPED COMPUTER" Unfortunately I do not find this to be so, and I would like to know why, please. The DVD created is

  • Switchover tnsnames client

    I have created primary and standby database, and both are working perfectly fine, when I performed switchover, I am having one issue. The client users can not access the database The reason they have only one primary database entry in tnsnames.ora fi