Headphones will not stay connected to the jack on my macbook
My computers headphone jack works, when something is plugged in it outputs audio fine but it isnt locking in so if i touch the cable and it moves a fraction of a inch then it disconnects and goes out my computer speakers. Do i need to go to a mac store and get my computer replaced?
The plugs on headphones usually have poor dimensional tolerances compared to the digital audi jack in a Mac computer. I'd try other devices first.
If they do not work either, then take it to an Apple Store. Something could be blocking the jack. If you've had the computer longer than about 14 days, they will not replace it, only repair it.
Similar Messages
-
My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.
Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
OpenWEP (insecure) or WPA2(AES) is the only secure standard.
..WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots
Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
If your still having trouble after this, take both machines back to the store for a free evaluation. -
SInce I downloaded the new iOS6 update on my ipad2, it will not stay connected to my wifi. Does anyone know why or how to fix it?
Hm, posting on this forum didn't fix it for me.
-
My ipad will not stay connect to the internet?
My ipad will not stay connect to thier internet. I have to turn ipad off and back on then it will connect for a short time them I have to turn it off and back on to reconnect?
1. Turn router off for 30 seconds and on again, this will refresh the IP address of your iPad
2. Reset network settings: Settings>General>Reset>Reset Network Settings
3. Try adding your SSID and Password manually
Settings>Wi-Fi>Other...>Other Network -
Macbook Pro will not stay connected to the internet
It appears that I am not alone in this problem, but none of the troubleshooting is helping.
There seems to be no trigger, but randomly 0-10 minutes the internet stops working on the Macbook. Sometimes restarting the wireless helps, most of the time it does not.
I know that my network/internet are working fine because all of our other devices stay connected with the Macbook drops. Is there a easy fix that I missed?
Thanks,
MikePlease test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
SOLVED! HP Officejet 6500A E710 will not stay connected to the network. scanner not connected
After 5 hours of live remote HP tech support, and 10 more hours of web searching, I am happy to say I have solved the wireless network connection issue with scanning and printing using the HP Officejet 6500A E710n-z. I notice that there are a lot of people with similar issues with no common, successful fix. Here is what worked for me.
Background Info:
Upgraded internet service from 9Mbps to 27Mbps...Provider brought out new Arris DG860 modem/router. Configured network and connected all clients (smart phones, PCs, Tablets, etc) successfully accept the printer. With this new router/modem the printer/scanner/fax would not connect to my PC at all (Windows 7 64-bit). The Officejet was always connected to the network, however, anytime I tried to print I would get an error "Unable to connect to the printer...", and when I made an attempt to scan.."Scanner not connected, make sure it is connected to the network..." blah blah blah.
Process:
After searching the web for solutions with no success, I finally made my first call to HP tech support. Tech tried numerous fixes: many network changes (channel, static IP, etc.), made changes to Windows system settings and registry, installed new software and drivers, ran the scan doctor, partial, semi, and full reset on the printer. He changed my wifi channel to 6 (or 11) from AUTO and whola. That seemed to fix the problem. After hanging up the phone 10 minutes later "No connection" errors again. Made a second call to HP Tech Support, and this new tech basically tried all the same fixes as the first tech. Worked again for 10-15 minutes then disconnected. Made third call to tech and this individual tried the same fixes as the previous two, but to no avail. He said he would have to direct me to a more Advanced Technician and would call back tomorrow. They called back the next day, and this new tech fixed the issue within 20 minutes.
Problem/Solution:
The fourth "more advanced" tech made one change in my network configuration settings. He changed my network mode from B/G/N to B/G and now the printer/scanner/fax stays connected and works like brand new. The only problem is that all my devices (including the Officejet) are 802.11N capable. Setting my network to the old B/G mixed mode slows my speed down just a bit. Using B/G/N mode or N, my download speed is 27 Mbps. On B/G mixed my speed is 25Mbps. Not too big of a deal, though. All the HP Support Techs were very nice and helpfull. They refunded my $25 Tech fee [fee charged when product is out of warranty] because the problem is not "technically" solved, even though it does work. Conclusio: This seems to be an issue with my the modem/router provided by my ISP. Could also be that it is an older Officejet and need to upgrade. To Fix Follow the Steps Below:
Step 1: Find your default gateway IP...usuall 192.168.0.1 or 192.168.1.1 or similar. Type this IP into your web address bar and hit enter.
Step 2: Enter the username and password. This is normally set at factory default --> username: admin ....passowrd: password .... or .... admin
Step 3: Go to the "Wireless Setup" tab and under the "Advanced Options" and "Wireless Network Settings" change the "Wireless Mode" to "B/G mixed".
Step 4: Click "Apply" then close the browser.
You may, or may not, lose your wifi connection for a short period while the new settings are applied and you may, or may not, have to power cycle your modem/router. That's it. Worked for me and I hope it works for you too. If you have any questions or comments please feel free to post.OK, that all sounds right. Here are a few more router config ideas:
1. Make sure that 802.11g mode is available, along with others is OK, but 'g' must be present.
2. Change the channel to 11.
3. Use WPA or WPA/WPA2 encryption, not WPA2 only.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My mac will not stay connected to the internet..
I have cable internet. Every 5 minutes of so i get a message that says cannot connect to the internet. I checked my network, and the Ethernet says its connected and it is green. Si I have to restart my mac sometimes a few times before it will connect. Not sure what to do. Can someone help me? This started about a month ago.
CB50 wrote:
I asked about the update to IOS 8. I guess I din't realize the difference between OSMac 10.6.8 and IOS. Apologies. But I do have an IPad. I was asking about my current Excel and Word files. Will I be able to convert these files to Numbers and Pages on the IPad without losing data? Thanx
CB50,
It is best that you create your own thread. If your issue is with your iPad than please create it in either the IOS forum or iPad forums. If your problem is with an Intel based Mac then use the Intel iMac forums or OS X forum for the version of OS X you have installed on your computer.
What you are doign is called threadjacking, attempting to take over someone elses thread. This is considered rude which I am sure is not your intent. To locate the correct forum please click Apple Support Communities at the top of this page and navigate to the correct forum.
Good luck. -
My iMac (2009 model) will not stay connected to the internet either via wifi or by ether net.
All other devices (2 PC laptops, 1 ipad, 1iphone, Apple TV and Airport express) connect just fine and stay connected. Deeply annoyed.
I was having the same issue with my 2011 iMac running lion, and it may be somewhat of a less technical resolution but it solved my problem...
Go to SYSTEM PREFERENCES
Then to NETWORK
Click ADVANCED
Under WI-FI there should be a box with your preferred networks
Make sure your personal network (the one you want to be connected to at all times) is listed FIRST.
Just click and drag to rearrange the order.
When I turned on my iMac for the first time, it picked up a weak network without a password and always tried to connect to it. I changed my personal network to the top of the list and now my iMac connects to that one after I leave my computer for a while.
Hope this helps -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
My ipad will not stay connected to the internet. the message in the settings says low memory. How do I fix this problem?
Go to Settings > General > Usage and you will see the memory consumers. Remove some of the big stuff.
-
Ipod touch will not stay connected to network after trying to use scrabble
I had a new ipod touch and purchased the scrabble app from EA games. I could not log into facebook to load my games onto the app on my touch. The ipod would send me to my home page and disconnect me from the internet. Eventually my ipod would not connect to the network at all. I called Apple and they determined that the ipod was faulty and sent me a new one. Upon receiving the new ipod I downloaded and tried to use Scrabble again not thinking that the problem was the Scrabble app from the get go. Now again my ipod will not stay connected to the network. I have deleted the Scrabble app and reset my network settings and still nothing. It will occasionally connect but I cannot do anything with the ipod. However, it will work when plugged into my computer. I have contacted EA Games with the problem and they have "escalated my issue to their expert team", but I have yet to hear anything back from them. Anyone else having similar issues and know how to resolve this?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?
rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer -
I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?
Iran uses GSM, so the iPhone 5 will work. It is already unlocked. Just put local Iranian SIM in phone.
-
Iphone will not stay connected "invalid response received from the device."
I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
Thanks in advance for anyone who can help!Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
-I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
-I add them to the "ringtones" section under "Devices"
-ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
-I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Why on Earth could this be? -
My iphone 4s and my ipad both will not stay connected to wifi since the latest update ios.6
my iphone will not stay connected to wifi since the ios 6.0 update
Hello DickChris,
The following article provides some useful troubleshooting steps and information that can help establish and stabilize Wi-Fi connections on your iPad.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen
Maybe you are looking for
-
while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance
-
Hi, I have the following scenario: I send an IDOC from SAP R/3 to PI. In PI this IDOC is sent to a BPM. In the BPM an select-statement is performed to get additional data from an external database Then a mapping is performed and I have to update the
-
Mail.app, Link on signature-icon does not open URL
In a mail-signature I have a FaceBook-icon with a Hyperlink to a FaceBook-site. - This link works not in a received message, when the recipient is Mail.app on Yosemite. - With Mail.app on Mavericks it works well. Behaviour: - Double-Click opens the a
-
Steps involved in developing an add-on
Hi All, What are the steps involved in the process of developing an add-on for SAP B One ? I like to know more on this. Does any one suggest from the scratch what things are required and each step in the sequential order to develop an Add-On ? Thank
-
Product invoices sent to my customers are being marked as spam. Is there a way to fix that?
Customers who buy my products get an invoice as a confirmation, but its being marked as spam. I know that the quick fix would be for the customers to mark it as "Not Spam" but I need something more concrete. Is there a way to fix this?