Headphones work for only a few seconds after plugging in
When I plug my headphones in, sound comes through perfectly for several seconds, then cuts out. Unplugging the headphones and putting them back in brings the sound back for a few seconds, then it cuts out again. The sound from the internal speakers works perfectly, the problem is only with the headphones. Jiggling the headphone jack doesn't do anything. Has anyone else experienced this? I just got my MacBook for christmas and the problem has been there since the first time I turned the computer on.
I did have a problem with missing sound which was cured by checking the HD/Applications/Utilities/Audio Midi Setup/Audio Devices and ensuring that the sample rate format was set to 44.100.0hz. This was a "No Audio on YouTube" problem but fixed when I found the Midi setting to be 96khz or similar.
My only further thought before dragging the machine back to the store is an OS reload.
My core duo was not behaving correctly out of the box and had several problems among which iSight camera on and not responding, so I did a clean install from disc of the operating system.
Tiresome I know but in my case it cleared everything and the Mac's been fine since.
Best of luck.
Similar Messages
-
Display only works for 2 or 3 seconds after this is black on Qosmio G50
Hi
I have a problem with my G50.
On starup the display only works for 2 or 3 seconds after this is black, I connect to a external display and using de FN+F5 i can see everything on the second display, if I turn to the internal display using FN+F5 it works only the same 2 or 3 seconds.
thanksHello
If you can see everything on the external screen the graphic card itself is ok and works properly! So the problem must be the internal display itself or a part of it like FL inverter
Its hard to say what part exactly and I think this can only be done from professional people. So you should contact nearest authorized service provider in your country and ask the guys for help. Im sure the problem can be clarified with the guys very easy because they have professional diagnostic tools. Also they can order original Toshiba spare parts to exchange the defective hardware part.
Here is a list of them:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Good luck! :) -
Ipod recognized by computer for only a few seconds?!
My ipod froze up while it was plugged into the computer. I unplugged it and reset it, but now it keeps showing a folder or a battery w/ an exclamation mark when i plug it into the AC adapter. When I plug it into the computer, it'll show the same icons, but then will be recognized by the computer for only a few seconds flashing the "do not disconnect" screen. Is there any way I can fix my ipod? I've tried to update the software on it, but that doesn't work since the computer only recognizes the ipod for only a few seconds. Any help is much appreciated. Thanks!
Try the instructions in this article; if disk use isn't enabled for the iPod, it will disappear from the computer after the synchronization process is complete.
(20795) -
Started downloading CD library to iPod. Plenty of space remaining, but it quit syncing with my music/play list. Sync notification appears for only a few seconds then stops. Sync scroll bar on music/play list never starts scrolling. Any suggestions?
Which version of iTunes and which iPod Classic model are you using?
Have you tried to Reset the iPod and download again? -
Except for telephone ringtone, all alerts sound for only a few seconds following latest os update
After updating my Z10 to the latest operating system this week, I found that alerts for my BBM, Wotsapp, Sms and email only sound for about 8-10 seconds. My ringtone for calls is played in full though.
All of the alerts used the correct tones (.mp3 tracks); nevertheless, I reset them by navigating each app to the correct alert. But nothing changed.
Is there a way to resolve this please? I need more time to hear an alert when not in a quiet environment.
Has anyone else had the same problem?
Many thanks.Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
Why does my song play for only a few seconds?
I purchased & downloaded an entire album from itunes but the first song, the title track, will only play for a few seconds before skipping to the next song. It's a 3min long tune but all I get is 3-4 seconds of play. How can I ensure that I get the entire track that I paid for?
If you can do a second download in your country delete the track completely from your iTunes library, then re-download.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085 ); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple recommends "you always back up your iTunes library in the event that a purchased item is no longer available on the iTunes Store." -
There are no details about which version the update applies to.
I cannot be sure that this is not a scam so I have not uploaded it. The fact that the box stays on the screen for only a few seconds, before the regular Firefox screen opens, suggests that the box wants the user to make a quick, uniformed, decision, and to press "Next" rather than find out about the changes.Did you ever install a Firefox 4 beta (or RC) version in the past?
It is possible that you are still on the beta update channel if you ever installed a Firefox 4 beta version or a release candidate.<br />
You can check that by looking at the pref <b>app.update.channel</b> on the about:config page.<br />
If the value of that pref is beta then it is better to download and install the latest Firefox 4.0.x release.<br />
You can find the latest Firefox 4.0.x on this site:
* http://www.mozilla.com/en-US/firefox/all.html -
the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they are very small portion of the actual photo
Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix? -
A few seconds after start the GDM mouse stops working
After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
Edited: Mouse works. Only pointer does not move.
lscpi says:
00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
gdm says:
usb 2-2: new low speed USB device using uhci_hcd and address 4
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
(this line is repeated several times:)
[drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
[drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[drm:i915_reset] *ERROR* Failed to reset chip.
/var/log/Xorg.0.log says:
[ 23.129]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 23.129]
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
[ 23.129] X Protocol Version 11, Revision 0
[ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
[ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
[ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
[ 23.129] Build Date: 08 January 2011 11:27:31PM
[ 23.129]
[ 23.130] Current version of pixman: 0.20.2
[ 23.130] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
[ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.206] (==) No Layout section. Using the first Screen section.
[ 23.206] (==) No screen section available. Using defaults.
[ 23.206] (**) |-->Screen "Default Screen Section" (0)
[ 23.206] (**) | |-->Monitor "<default monitor>"
[ 23.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.206] (==) Automatically adding devices
[ 23.206] (==) Automatically enabling devices
[ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.260] Entry deleted from font path.
[ 23.295] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.295] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.295] (II) Loader magic: 0x81f3160
[ 23.295] (II) Module ABI versions:
[ 23.295] X.Org ANSI C Emulation: 0.4
[ 23.295] X.Org Video Driver: 8.0
[ 23.295] X.Org XInput driver : 11.0
[ 23.295] X.Org Server Extension : 4.0
[ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
[ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.296] (II) LoadModule: "extmod"
[ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.314] (II) Module extmod: vendor="X.Org Foundation"
[ 23.314] compiled for 1.9.3.901, module version = 1.0.0
[ 23.314] Module class: X.Org Server Extension
[ 23.314] ABI class: X.Org Server Extension, version 4.0
[ 23.314] (II) Loading extension MIT-SCREEN-SAVER
[ 23.314] (II) Loading extension XFree86-VidModeExtension
[ 23.314] (II) Loading extension XFree86-DGA
[ 23.314] (II) Loading extension DPMS
[ 23.314] (II) Loading extension XVideo
[ 23.314] (II) Loading extension XVideo-MotionCompensation
[ 23.314] (II) Loading extension X-Resource
[ 23.314] (II) LoadModule: "dbe"
[ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.320] (II) Module dbe: vendor="X.Org Foundation"
[ 23.320] compiled for 1.9.3.901, module version = 1.0.0
[ 23.320] Module class: X.Org Server Extension
[ 23.320] ABI class: X.Org Server Extension, version 4.0
[ 23.320] (II) Loading extension DOUBLE-BUFFER
[ 23.320] (II) LoadModule: "glx"
[ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.337] (II) Module glx: vendor="X.Org Foundation"
[ 23.337] compiled for 1.9.3.901, module version = 1.0.0
[ 23.337] ABI class: X.Org Server Extension, version 4.0
[ 23.337] (==) AIGLX enabled
[ 23.337] (II) Loading extension GLX
[ 23.337] (II) LoadModule: "record"
[ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.338] (II) Module record: vendor="X.Org Foundation"
[ 23.338] compiled for 1.9.3.901, module version = 1.13.0
[ 23.338] Module class: X.Org Server Extension
[ 23.338] ABI class: X.Org Server Extension, version 4.0
[ 23.339] (II) Loading extension RECORD
[ 23.339] (II) LoadModule: "dri"
[ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.347] (II) Module dri: vendor="X.Org Foundation"
[ 23.347] compiled for 1.9.3.901, module version = 1.0.0
[ 23.347] ABI class: X.Org Server Extension, version 4.0
[ 23.347] (II) Loading extension XFree86-DRI
[ 23.347] (II) LoadModule: "dri2"
[ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.351] (II) Module dri2: vendor="X.Org Foundation"
[ 23.351] compiled for 1.9.3.901, module version = 1.2.0
[ 23.351] ABI class: X.Org Server Extension, version 4.0
[ 23.351] (II) Loading extension DRI2
[ 23.351] (==) Matched intel as autoconfigured driver 0
[ 23.351] (==) Matched vesa as autoconfigured driver 1
[ 23.351] (==) Matched fbdev as autoconfigured driver 2
[ 23.351] (==) Assigned the driver to the xf86ConfigLayout
[ 23.351] (II) LoadModule: "intel"
[ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.408] (II) Module intel: vendor="X.Org Foundation"
[ 23.408] compiled for 1.9.3, module version = 2.14.0
[ 23.408] Module class: X.Org Video Driver
[ 23.408] ABI class: X.Org Video Driver, version 8.0
[ 23.408] (II) LoadModule: "vesa"
[ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.414] (II) Module vesa: vendor="X.Org Foundation"
[ 23.414] compiled for 1.9.0, module version = 2.3.0
[ 23.414] Module class: X.Org Video Driver
[ 23.414] ABI class: X.Org Video Driver, version 8.0
[ 23.414] (II) LoadModule: "fbdev"
[ 23.425] (WW) Warning, couldn't open module fbdev
[ 23.425] (II) UnloadModule: "fbdev"
[ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 23.426] (II) VESA: driver for VESA chipsets: vesa
[ 23.426] (++) using VT number 7
[ 23.435] (WW) Falling back to old probe method for vesa
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: drmOpenMinor returns 8
[ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.435] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.435] (==) intel(0): RGB weight 888
[ 23.435] (==) intel(0): Default visual is TrueColor
[ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
[ 23.436] (--) intel(0): Chipset: "946GZ"
[ 23.436] (**) intel(0): Tiling enabled
[ 23.436] (**) intel(0): SwapBuffers wait enabled
[ 23.436] (==) intel(0): video overlay key set to 0x101fe
[ 23.520] (II) intel(0): Output VGA1 has no monitor section
[ 23.587] (II) intel(0): EDID for output VGA1
[ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
[ 23.587] (II) intel(0): Year: 2010 Week: 1
[ 23.587] (II) intel(0): EDID Version: 1.3
[ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
[ 23.587] (II) intel(0): Gamma: 2.20
[ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 23.587] (II) intel(0): First detailed timing is preferred mode
[ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
[ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 23.587] (II) intel(0): Supported established timings:
[ 23.587] (II) intel(0): 720x400@70Hz
[ 23.587] (II) intel(0): 640x480@60Hz
[ 23.587] (II) intel(0): 640x480@67Hz
[ 23.587] (II) intel(0): 640x480@72Hz
[ 23.587] (II) intel(0): 640x480@75Hz
[ 23.587] (II) intel(0): 800x600@56Hz
[ 23.587] (II) intel(0): 800x600@60Hz
[ 23.587] (II) intel(0): 800x600@72Hz
[ 23.587] (II) intel(0): 800x600@75Hz
[ 23.587] (II) intel(0): 832x624@75Hz
[ 23.587] (II) intel(0): 1024x768@60Hz
[ 23.587] (II) intel(0): 1024x768@70Hz
[ 23.587] (II) intel(0): 1024x768@75Hz
[ 23.587] (II) intel(0): 1280x1024@75Hz
[ 23.587] (II) intel(0): 1152x864@75Hz
[ 23.587] (II) intel(0): Manufacturer's mask: 0
[ 23.587] (II) intel(0): Supported standard timings:
[ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 23.588] (II) intel(0): Supported detailed timing:
[ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
[ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 23.588] (II) intel(0): Monitor name: SyncMaster
[ 23.588] (II) intel(0): Serial No: HMFZ102588
[ 23.588] (II) intel(0): EDID (in hex):
[ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
[ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
[ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
[ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
[ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
[ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
[ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
[ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
[ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 23.613] (II) intel(0): Using EDID range info for horizontal sync
[ 23.613] (II) intel(0): Using EDID range info for vertical refresh
[ 23.613] (II) intel(0): Printing DDC gathered Modelines:
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Printing probed modes for output VGA1
[ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.614] (II) intel(0): Output VGA1 connected
[ 23.614] (II) intel(0): Using exact sizes for initial modes
[ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
[ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
[ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
[ 23.614] (**) intel(0): DPI set to (96, 88)
[ 23.614] (II) Loading sub module "fb"
[ 23.614] (II) LoadModule: "fb"
[ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.628] (II) Module fb: vendor="X.Org Foundation"
[ 23.629] compiled for 1.9.3.901, module version = 1.0.0
[ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.629] (II) UnloadModule: "vesa"
[ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.629] (==) Depth 24 pixmap format is 32 bpp
[ 23.629] (==) intel(0): VideoRam: 262144 KB
[ 23.629] (II) intel(0): [DRI2] Setup complete
[ 23.629] (II) intel(0): [DRI2] DRI driver: i915
[ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 23.656] (II) UXA(0): Driver registered support for the following operations:
[ 23.656] (II) solid
[ 23.656] (II) copy
[ 23.656] (II) composite (RENDER acceleration)
[ 23.656] (II) put_image
[ 23.656] (II) get_image
[ 23.656] (==) intel(0): Backing store disabled
[ 23.656] (==) intel(0): Silken mouse enabled
[ 23.658] (II) intel(0): Initializing HW Cursor
[ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.673] (==) intel(0): DPMS enabled
[ 23.673] (==) intel(0): Intel XvMC decoder disabled
[ 23.673] (II) intel(0): Set up textured video
[ 23.673] (II) intel(0): Set up overlay video
[ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.673] (==) intel(0): hotplug detection: "enabled"
[ 23.674] (--) RandR disabled
[ 23.674] (II) Initializing built-in extension Generic Event Extension
[ 23.674] (II) Initializing built-in extension SHAPE
[ 23.674] (II) Initializing built-in extension MIT-SHM
[ 23.674] (II) Initializing built-in extension XInputExtension
[ 23.674] (II) Initializing built-in extension XTEST
[ 23.674] (II) Initializing built-in extension BIG-REQUESTS
[ 23.674] (II) Initializing built-in extension SYNC
[ 23.674] (II) Initializing built-in extension XKEYBOARD
[ 23.674] (II) Initializing built-in extension XC-MISC
[ 23.674] (II) Initializing built-in extension SECURITY
[ 23.674] (II) Initializing built-in extension XINERAMA
[ 23.674] (II) Initializing built-in extension XFIXES
[ 23.674] (II) Initializing built-in extension RENDER
[ 23.674] (II) Initializing built-in extension RANDR
[ 23.674] (II) Initializing built-in extension COMPOSITE
[ 23.674] (II) Initializing built-in extension DAMAGE
[ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
[ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.316] (II) LoadModule: "evdev"
[ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.334] (II) Module evdev: vendor="X.Org Foundation"
[ 24.334] compiled for 1.9.0, module version = 2.5.0
[ 24.334] Module class: X.Org XInput Driver
[ 24.334] ABI class: X.Org XInput driver, version 11.0
[ 24.334] (**) Power Button: always reports core events
[ 24.334] (**) Power Button: Device: "/dev/input/event1"
[ 24.340] (--) Power Button: Found keys
[ 24.340] (II) Power Button: Configuring as keyboard
[ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.340] (**) Option "xkb_rules" "evdev"
[ 24.340] (**) Option "xkb_model" "evdev"
[ 24.340] (**) Option "xkb_layout" "us"
[ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.380] (**) Power Button: always reports core events
[ 24.380] (**) Power Button: Device: "/dev/input/event0"
[ 24.386] (--) Power Button: Found keys
[ 24.386] (II) Power Button: Configuring as keyboard
[ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.386] (**) Option "xkb_rules" "evdev"
[ 24.386] (**) Option "xkb_model" "evdev"
[ 24.386] (**) Option "xkb_layout" "us"
[ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 24.394] (II) No input driver/identifier specified (ignoring)
[ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
[ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
[ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
[ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
[ 24.403] (**) Option "xkb_rules" "evdev"
[ 24.403] (**) Option "xkb_model" "evdev"
[ 24.403] (**) Option "xkb_layout" "us"
[ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 24.411] (II) No input driver/identifier specified (ignoring)
[ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.182] (II) intel(0): Using hsync ranges from config file
[ 27.182] (II) intel(0): Using vrefresh ranges from config file
[ 27.182] (II) intel(0): Printing DDC gathered Modelines:
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.256] (II) intel(0): Using hsync ranges from config file
[ 27.256] (II) intel(0): Using vrefresh ranges from config file
[ 27.256] (II) intel(0): Printing DDC gathered Modelines:
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.363] (II) intel(0): Using hsync ranges from config file
[ 27.364] (II) intel(0): Using vrefresh ranges from config file
[ 27.364] (II) intel(0): Printing DDC gathered Modelines:
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.433] (II) intel(0): Using hsync ranges from config file
[ 27.433] (II) intel(0): Using vrefresh ranges from config file
[ 27.433] (II) intel(0): Printing DDC gathered Modelines:
[ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 72.861] (**) USB Optical Mouse: always reports core events
[ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
[ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
[ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
[ 72.866] (--) USB Optical Mouse: Found relative axes
[ 72.866] (--) USB Optical Mouse: Found x and y relative axes
[ 72.866] (II) USB Optical Mouse: Configuring as mouse
[ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 72.867] (II) USB Optical Mouse: initialized for relative axes.
[ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 72.868] (II) No input driver/identifier specified (ignoring)
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 176.751] (EE) intel(0): failed to set cursor: Input/output error
[ 176.752] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 207.322] (EE) intel(0): failed to set cursor: Input/output error
[ 207.323] (EE) intel(0): failed to set cursor: Input/output error
[ 208.093] (EE) intel(0): failed to set cursor: Input/output error
[ 208.094] (EE) intel(0): failed to set cursor: Input/output error
[ 209.080] (EE) intel(0): failed to set cursor: Input/output error
[ 209.081] (EE) intel(0): failed to set cursor: Input/output error
[ 209.641] (EE) intel(0): failed to set cursor: Input/output error
[ 209.642] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.912] (EE) intel(0): failed to set cursor: Input/output error
[ 225.913] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 248.711] (EE) intel(0): failed to set cursor: Input/output error
[ 248.712] (EE) intel(0): failed to set cursor: Input/output error
[ 249.347] (EE) intel(0): failed to set cursor: Input/output error
[ 249.348] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 361.916] (EE) intel(0): failed to set cursor: Input/output error
[ 361.917] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 367.953] (EE) intel(0): failed to set cursor: Input/output error
[ 367.954] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 374.450] (EE) intel(0): failed to set cursor: Input/output error
[ 374.451] (EE) intel(0): failed to set cursor: Input/output error
[ 376.802] (EE) intel(0): failed to set cursor: Input/output error
[ 376.803] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 392.372] (EE) intel(0): failed to set cursor: Input/output error
[ 392.373] (EE) intel(0): failed to set cursor: Input/output error
[ 393.630] (EE) intel(0): failed to set cursor: Input/output error
[ 393.631] (EE) intel(0): failed to set cursor: Input/output error
[ 394.932] (EE) intel(0): failed to set cursor: Input/output error
[ 394.933] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 402.517] (EE) intel(0): failed to set cursor: Input/output error
[ 402.518] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.910] (EE) intel(0): failed to set cursor: Input/output error
[ 411.912] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 416.762] (EE) intel(0): failed to set cursor: Input/output error
[ 416.763] (EE) intel(0): failed to set cursor: Input/output error
[ 420.439] (EE) intel(0): failed to set cursor: Input/output error
[ 420.440] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 437.705] (EE) intel(0): failed to set cursor: Input/output error
[ 437.706] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 453.190] (EE) intel(0): failed to set cursor: Input/output error
[ 453.191] (EE) intel(0): failed to set cursor: Input/output error
[ 455.467] (EE) intel(0): failed to set cursor: Input/output error
[ 455.468] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 462.768] (EE) intel(0): failed to set cursor: Input/output error
[ 462.770] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 472.446] (EE) intel(0): failed to set cursor: Input/output error
[ 472.447] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 477.849] (EE) intel(0): failed to set cursor: Input/output error
[ 477.852] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 489.082] (EE) intel(0): failed to set cursor: Input/output error
[ 489.083] (EE) intel(0): failed to set cursor: Input/output error
[ 491.279] (EE) intel(0): failed to set cursor: Input/output error
[ 491.280] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 498.171] (EE) intel(0): failed to set cursor: Input/output error
[ 498.172] (EE) intel(0): failed to set cursor: Input/output error
[ 499.312] (EE) intel(0): failed to set cursor: Input/output error
[ 499.313] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 508.209] (EE) intel(0): failed to set cursor: Input/output error
[ 508.210] (EE) intel(0): failed to set cursor: Input/output error
[ 540.521] (EE) intel(0): failed to set cursor: Input/output error
[ 540.526] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 553.470] (EE) intel(0): failed to set cursor: Input/output error
[ 553.471] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.606] (EE) intel(0): failed to set cursor: Input/output error
[ 690.607] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.070] (EE) intel(0): failed to set cursor: Input/output error
[ 691.071] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 765.910] (EE) intel(0): failed to set cursor: Input/output error
[ 765.911] (EE) intel(0): failed to set cursor: Input/output error
[ 769.826] (EE) intel(0): failed to set cursor: Input/output error
[ 769.827] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 789.813] (EE) intel(0): failed to set cursor: Input/output error
[ 789.814] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 805.567] (EE) intel(0): failed to set cursor: Input/output error
[ 805.568] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 831.833] (EE) intel(0): failed to set cursor: Input/output error
[ 831.834] (EE) intel(0): failed to set cursor: Input/output error
[ 833.806] (EE) intel(0): failed to set cursor: Input/output error
[ 833.807] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 867.428] (EE) intel(0): failed to set cursor: Input/output error
[ 867.429] (EE) intel(0): failed to set cursor: Input/output error
[ 870.354] (EE) intel(0): failed to set cursor: Input/output error
[ 870.355] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 877.131] (EE) intel(0): failed to set cursor: Input/output error
[ 877.132] (EE) intel(0): failed to set cursor: Input/output error
[ 878.020] (EE) intel(0): failed to set cursor: Input/output error
[ 878.021] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 898.029] (EE) intel(0): failed to set cursor: Input/output error
[ 898.030] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 907.266] (EE) intel(0): failed to set cursor: Input/output error
[ 907.267] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 915.519] (EE) intel(0): failed to set cursor: Input/output error
[ 915.520] (EE) intel(0): failed to set cursor: Input/output error
[ 921.179] (EE) intel(0): failed to set cursor: Input/output error
[ 921.180] (EE) intel(0): failed to set cursor: Input/output error
[ 923.296] (EE) intel(0): failed to set cursor: Input/output error
[ 923.297] (EE) intel(0): failed to set cursor: Input/output error
[ 926.020] (EE) intel(0): failed to set cursor: Input/output error
[ 926.021] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 938.375] (EE) intel(0): failed to set cursor: Input/output error
[ 938.376] (EE) intel(0): failed to set cursor: Input/output error
[ 951.395] (EE) intel(0): failed to set cursor: Input/output error
[ 951.396] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/outpuI have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.
-
Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase
HP Deskjet 4180
Genuine HP Tri-Color #22 ink cartridge and Black #21 ink cartridge
Windows 7
Test printing from Photoshop, Windows Picture Viewer and GIMP.
Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase.
The experience that I'm having currently contradicts very good, accurate color from HP cartridges in the past from RGB images that I've printed successfully with this printer. I've previously got excellent color from the true HP ink cartridges on this Deskjet 4180 printer.
But today it is obvious that the yellow is not flowing from this cartridge that was installed only a few weeks ago. And my ink levels are at 50 percent, and they were even higher when I started today... see the screenshots below.
I'm printing from Photoshop, but for some tests I tried printing from two other applications today but I'm always getting these results that indicate that there is no yellow printing... this is much worse than just a bad color profile. I'm an experienced photo retoucher and I have a long history of dealing with inkjet printing in the work place with all kinds of printers.
I know that inks can dry up in their cartridges if they don't get printed with every few weeks and if the printer isn't maintained. I purchased these new cartridges only about three weeks ago and the first test prints and some prints two weeks ago came out perfect.
But today this is the result I'm getting... screenshots below show the original RGB image and an actual scan of the bad print results I'm getting, indicating that no yellow is flowing from the HP tri-color cartridge. And a screenshot of the ink level indicator panel is at the bottom.
Why is the yellow ink drying up and not flowing so quickly? How can I prevent this besides doing semi-weekly prints to keep the inks from drying up? I'm in a fairly humid climat, so dry air is not the problem. The contact points on the cartridge are clean.
Does HP guarantee their cartridges for this kind of thing?
Good color - original RGB image...
Bad color - actual scan of bad print with no yellow, below...
Ink levels after test printing...
Thanks for any help.
digiWell, here is the answer I was looking for, only arrived at by way of my own further investigation and experimentation.
It seems that no matter who I asked about this problem, I always got the same questions and answers.
For example, the people at the HP 800 number for consumer help, where it seemed I was not talking to someone who was actually familiar with the product, because they came to the conclusion that I need to buy a new HP printer... wow, isn't that a big surprise for an HP employee to say, "Just buy a new one!".
No one, and I mean no one, would seem to be able to listen to or understand what I wrote in my original question on this thread about how this printer prints fine when I first put in a new ink cartridge, and then just a few weeks later one or two of the colors seem to be dried up and they won't print.
And it seems that somewhere I read that you need to print a test maintenance print every month or so to keep the inks from drying up... but the inks seem to be drying up in less than three weeks now, even though I used to be able to go for months without doing a print and the inks would still be fine.
So when I was talking to someone in India, Malaysia or the Philippines at the HP 800 customer phone support number, after going through so much crap about whether this printer was still in warranty just to have a simple question answered you'd think I was trying to launch nuclear missiles and my launch codes weren't current.
And it was much the same situation to get on HP's "Live Chat" customer service on the net, and then they'd go through the same line of questions and answers as the support people on the HP 800 phone line...
Q: "Do you have dirty nozzles on your ink cartridges?"
A: "No, like I said in my original statement, I cleaned those and they weren't dirty to begin with."
Response: "Because you need to clean those every so often, you know."
Q: "Did you try cleaning the contacts on the cartridges?"
A: "Yes, like I said in my original statement, I already did that."
Response: "Because you need to clean those contacts every so often, you know."
Q: "Did you try putting in a new cartridge?"
A: "Yes, like I said in my original statement, this cartridge is nearly new and it shows a 90% ink level."
Response: "Because you need to put in new cartridges when the ink runs out, you know."
Q: "Did you do a test print?"
A: "Yes, like I said in my original statement, I did a test print and that's what is telling me that the yellow and magenta are not printing any longer."
Response: "Because that's how you can tell if any colors aren't printing, you know."
So is anyone else seeing a pattern here? It's not like I'm talking or live chatting with a real human being, but maybe an automated voice prompt system that only has an A, B, C or 1, 2, 3 type of response system that it's working from.
The people hear a answer, and regardless of what that question was in the troubleshooting category that they are in, they just have a stock response that seems to bypass what the customer's answer was, so it's like I'm talking or live chatting with a machine that is uttering its responses in a fixed pattern, regardless of what I'm saying.
HP customer service is like talking to someone who isn't listening, so often they ask their next question, but I just answered that question with my previous answer.
Like I said, the way it used to be, HP or even after market ink cartridges could sit for months without doing a maintenance print and I would still get a perfect print every time. And that's pretty typical for maybe an older person who isn't printing prints that often, but they just want to print one every few months or so, like my mom, with her HP printer, who I've been troubleshooting this problem for.
Or even with my own large format Epson printer or any of the pro level inkjet printers and even IRIS printers that I've used in the workplace over the course of the last 20 years... you could do a print every two months and there was no problem with dried up inks.
And I know somewhere in the past I read that the maintenance print that the instructions was recommending be printed only needed to be done every 4 to 6 weeks to keep the inks from drying up, although when I go through the entire full blown PDF instruction manual now I can't find ANYTHING about how often a maintenance print needs to be done... that's right, nothing!
But on Christmas eve I once again exchanged my last, dried up HP tri-color ink cartridge at a Walgreens store where my mom had purchased it months prior (and the guy was nice enough to exchange it even after 5 months) which was yet another HP tri-color ink cartridge that had at least two of it's colors dry up after only a few weeks. At that Walgreens they had been nice enough to replace three prior HP tri-color ink cartridges with the same problem in the last year, and before that three different after market, off brand tri-color ink cartridges from another store had dried up after only a few weeks.
So the guy at Walgreens told me that now with HP cartridges you need to do a maintenance test print EVERY WEEK in order to keep the inks from drying up... THAT'S EVERY WEEK YOU ARE NOW SUPPOSED TO DO A TEST PRINT FOR MAINTENANCE.
Now, you DO NOT need to do one of the test prints where it prints a photo of a pear, which uses quite a bit of ink, but you can just do one of the self test prints where you hold down on the CANCEL button and then press the COLOR COPY button and it prints a quick test page with just a little color and a lot of B&W text, and that's apparently enough.
And that seems to be enough to keep the ink cartridges from drying up, the way they seem to be otherwise doing so quickly now, as opposed to how HP and other brand ink cartridges used to.
And in fact, now after about a month, after doing weekly self test prints, the ink cartridges are still flowing well and they just did some full color prints quite nicely... ALERT THE MEDIA AND ANYONE WHO CONSIDERS THEMSELVES HP PRINTING EXPERTS!
So the questions I would ask myself are these...
First, why is it that NO ONE at HP customer service knew this, whether it be on the HP 800 phone support or on the HP "Live Chat" with people in India, Malaysia and the Philippines, or even here on the HP Help Forum with so-called EXPERTS from HP?
Second, how have the inks changed so that in the past, you didn't need to do maintenance prints every week, but maybe every two months at the most, in order to keep the inks from drying up, but now the inks dry up in a matter of less than two weeks unless a maintenance print is done once a week?
Have HP and other ink makers changed the formula of their inks so they dry up much faster, forcing people to buy new cartridges when the last ink cartridge is still at a 90% level with dried up ink?
And as a result, are people on the HP 800 customer phone support line and on HP "Live Chat" telling people that they need to buy a new printer, when in actuallity their ink cartridges are just drying up within a new record short period of time?
You tell me, HP experts. -
Images burn into the screen after being there for only a few minutes?
What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support -
I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?
My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option). -
why does the cloud installer quit after only a few seconds of install?
I am having the same problem. Sorry I don't know an answer but would love help too.
I'm on a Mac - OSX10.9.3
Downloaded installer which opened to the point that I had the icon in my toolbar but it seemed to get stuck at that point - about 7 hours of scrolling "update cycle" (swirly thing in middle of the empty CC window) but no App tab or other tabs - just a white rectangle with scrolling.
So I tried un-installing, deleted all files, downloaded again but now I get the same as Scrapnick - installer launches with task bar at "Initializing Installer" which lasts only about 2 seconds, then flicks to "Dowloading Creative Cloud desktop" at which point the task bar & the installer window close.
I hope someone can help us with this... -
hey my little sister pressed something on my ipod and ever since some o f my songs are playing only for the first few seconds how do i solve this problem
BaconBits is right to ask if the files are protected or not.
DRM files can only be transferred using Windows Media Player, Creative MediaSource or Nano Media Explorer so that the licenses are transferred. Do not try drag'n'drop with Windows Explorer on porotected files. This is explained in the Help file manual on your CD.
Also do not use Audible Manager to transfer music files.
PB -
ipad 2 can not restart, apple logo only appears 2 seconds after that recharge logo appears for 2 minutes continuously while on the charger,pls help me
Try a reset; hope it'll force it into Recovery Mode
Hold the Sleep and Home button down until you see the Apple logo.
Maybe you are looking for
-
Connection Pool establishment problem
Hi Experts, we have one application with JCo mechanism. For this application, we are using one properties file, which holds ABAP connection information. From this connection information(sapconn.props), we created connection pool and fetching data fro
-
has anyone created a yearbook using pages?
-
Unable to create a Service Connection Point
Hi - I set up a new SharePoint 2013 environment. Everything installed successfully. When I launch Central Admin, it doesn't accept my logon ID/password. I found the following in the application event logs. I assume our AD guys will need to set
-
Hi Experts, We have a scenario where we are generating PDF files and saving it to KPRO. For performance reasons we implemented Form Bundling where in if we are selecting 100 Users the pdf files corresponding to each user is generated and pushed to KP
-
5508 LAG bundle connected to Nexus
Currently setting up a 5508 WLC connected to a Nexus C7010 running 5.1(1) code. WLC setup guide recommends the switch the WLC is connected to runs src-dst-ip load balancing on the LAG bundle. The setup guide also makes reference to 6500 switches runn