Headphones work speakers wo

Hi I have a problem where if I plug in my headphones I can play music and hear music but when I plug in my speakers there is no sound and itunes along with winamp pause the song and will not play it(same thing happens with movies). I have a soundblaster 2 audigy and Logitech Z-560 speakers. So I was just wondering if It is a soundcard issue or a speaker issue?

I don't have a Sound Blaster Audigy 2, but I'm sure this should apply the same way as a X-FI Extreme Gamer. Check the sound card's control panel settings for "headphone dectection"?if avalible and make sure that the checkbox for muting?speakers isn't checked, if it is checked, then de-check it and then your problem should be solved. Hope this helps you.

Similar Messages

  • HP pavilion dv6 headphones work speakers do not

    HP pavilion dv6 headphones work speakers do not. Updated drivers, ran utilities, Volume control options

    Hi Romero49,
    The next step would be to do a system factory reset. This recovery option returns all of the notebook's software to the condition it was in at the time of purchase. Any programs installed after purchase and any files you created will be removed entirely.
    Here is a document on how to perform this. Please make sure you back up all your documents and pictures before doing this.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02638587&lc=en&product=5177781&tmp...
    Hope this helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • After I unplug headphones, the speakers no longer work until rebooted.  Anyone else experience this?  Also had the same issue on the Droid Razr Maxx.

    After I unplug headphones, the speakers no longer work until rebooted.  Anyone else experience this?  Also had the same issue on the Droid Razr Maxx.

        Ahh. We can still help find the culprit, TeaParty14. Do you have any 3rd party applications installed to play your music? Are you able to hear any audio if you plug the headphones back into the phone instead of rebooting? Any audio for calls through the phone direct or through speakerphone?
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • T410s internal speakers fade out after a second, headphones work just fine

    Hello Community,
    My THinkpad T410, Type 2912-45G, Windows 7 (64bit) has a problem with the speakers.
    Starting last monday (June 25th) my speakers stop working. When I boot the TP you can hear a static click through the speakers and it plays the windows sound for one second only. After the second you can hear another static click and the speaker stops working. Thats pretty much the way it is with all other audio content, when the TP is booted.
    After pressing the Mute-Button or the volume-up or volume-down buttons the speakers will resume working for a second or so (still the static click, right before this second and afterward).
    When I plug in my Headpones everything works fine. When I unplug my headphones, speakers do work again for another second.
    I allready updated my BIOS, installed and uninstalled the driver, activated the sound-card (CONEXANT 20585 HD AUDIO), tried to update the driver. But nothing worked so far. I allready checked whether the switch in the headphone jack is stuck, but I couldn't find anything.
    Did anyone experience the same or a similar problem? As the speakers do work for the mentioned second I assume, that the Hardware should be fine. As the headphones work properly the sound-card should be detected and istalled correctly.
    I would really appreciate if someone could help me out on this. Sending the TP in (it is still whitin warranty) is going to be my last option since I need the TP for work.
    Thank you very much.
    Solved!
    Go to Solution.

    Hi thecez,
    Sorry to say that but it sounds like hardware issue. Please try BIOS and power management driver as well. If problem remain, please contact local lenovo when your machine is avaliable for inspection.
    Worldwide Support Center phone list for ThinkPad, ThinkCentre and ThinkStation systems
    http://support.lenovo.com/en_US/research/detail.page?DocID=HT036550
    Fred
    T61 + X201i

  • Sound is not coming out of speakers, but headphones work?

    I have a Satellite L505-S5990 laptop. Today while I was sitting at home browsing the Internet, I realized there was no sound coming out of the speakers. It was working just fine minutes before. It was sitting on the counter the entire time and it just silently stopped working.
    So I grabbed some headphones and plugged them in and they worked.
    I restarted the computer, still no sound coming from speakers.
    Windows 7 found no problems while troubleshooting the sound.
    I downloaded the Automated Troubleshooting Services to diagnose and fix sound playback issues from Microsoft but that didn't find any issues.
    I uninstalled the sound driver and installed the one that came with this laptop. I still get the same result. No sound from speakers but headphones work.
    Can anyone please tell me how to fix this?
    Thanks!!
    Solved!
    Go to Solution.

    Just want to add another relieved reader of this thread.  I had lost the sound to my speakers even though I had sound to headphones. I was convinced it was a damaged headphone jack because I had pushed the headphone plug in harder the last evening when my wife complained that she could still hear the speakers while I listened with the headphones.  The next morning--no speaker sound.
    I spent a few hours searching the web to see how to disassemble a satellite A505 and get to the jack.  But I wasn't even sure I could get a proper replacement jack that fit, and I was concerned that small damage, say to the ribbon connectors could render the computer useless--a large price to pay for just missing audio.  
    Fortunately, I stumbled onto this thread and I recalled I had put the unit to sleep the night before--something I don't usually do, but I didn't want all the Chrome web sites to have to reload so I just put it to sleep.
    When I put it to sleep again and fired it up--Sound!  I am so glad to find this solution so I just want to let people know it remains a viable option.
    Doug

  • My laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea

    my laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea
    what the hell is going on??i tried anything but doesn´t works

    Is "Do not disturb" activated in the Settings?
    Did you try to set up the phone as new device without using the latest backup?
    How to back up your data and set up as a new device
    Also try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    copied from Troubleshooting iPhone hardware

  • [SOLVED] No sound from speakers, headphones work (laptop, ALSA)

    Sorry about another "No sound"-thread . So, the headphones work just fine, I can play music or Youtube-videos or whatever but the speakers on my laptop stay mute no matter what I do. I even tested the speakers with a Ubuntu CD to check if I've broken them somehow.
    I've been having this odd problem for a week or so, I don't know since I usually use the headphones on my laptop anyway.
    lspci|grep Audio shows:
    00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
    01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series]
    With running 'amixer' I get sh*tload of stuff
    lsmod|grep snd
    snd_seq_oss 35584 0
    snd_seq_midi_event 9344 1 snd_seq_oss
    snd_seq 58336 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 9364 2 snd_seq_oss,snd_seq
    snd_hda_intel 529844 0
    snd_pcm_oss 45568 0
    snd_mixer_oss 18944 1 snd_pcm_oss
    snd_pcm 82952 2 snd_hda_intel,snd_pcm_oss
    snd_timer 24720 2 snd_seq,snd_pcm
    snd_page_alloc 11792 2 snd_hda_intel,snd_pcm
    snd_hwdep 10632 1 snd_hda_intel
    snd 65096 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
    soundcore 9632 1 snd
    Could it be a driver issue? I just need some cryptic parameter to some module, right?
    I've been playing around with alsamixer to fix this problem, maybe I've just messed things up a bit more? I really don't know much about ALSA, so the answer might just be obvious to some.
    Thanks!
    edit Screenshot of alsamixer
    Last edited by ap_ (2009-02-12 17:16:15)

    Solved by compiling & installing new alsa-driver. You can get it from here: http://ftp.kernel.org/pub/linux/kernel/ … 12.tar.bz2

  • No audio from speakers, headphones work just fine

    Hello everybody!
    I have a problem with my speakers can anyone help me? I have a satellite L855 laptop with realtek HD audio and windows 8. I was playing some civ 5 last night when my computer suddenly freezed. When i restarted the computer had a system update. After the system update the sound does not work from the internal speakers.
    Headphones work just fine though and everything looks normal (the green "sound bars" are moving even though i don't have sound).
    i have checked the device manager and everything looks just fine.
    I have updated my realtek drivers but it didn't help.
    I have double checked and nothing is muted.
    I have no idea what might've gone wrong, everything works perfectly except the speaker audio. I just bought this computer a week ago and i would be really pissed if i already had to get it to a repair station.
    Can anyone please help me?
    Solved!
    Go to Solution.

    Try a System Restore back to just before you processed the "System Update". From the Start screen, type "System Restore" and select Settings at the upper right and then click on "Create a Restore point"  at the upper left and follow directions.
    If you post back to these Forums again, please include your COMPLETE model info as in my examples below.
    C.B.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • No Sound from speakers but Headphones work on HP All-In-One 23-p142

    I recently purchased my computer HP Pavillion 23-p142 with Windows 8.1 64bit on July 9, 2015 and everything was golden...couldn't be happier with it for my needs. Now, in just the last few days, the sound doesn't work at all. No sound from Windows Media Player, Youtube etc. Absolutley nothing. Not even system sounds. I've tried troubleshooting tips such as going into Computer Management> Services> Windows Audio and restarting that service...still no luck. I've uninstalled and reinstalled the Realtek HD Audio drivers several times and it worked on the very first attempt then the sound went away again after a few hours. I'm at a loss for what to try next...Any help would be greatly appreciated. Thanks.  PS. I forgot to mention my headphones work fine. And here are some screenshots of devices...if that helps with anything.  

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are not able to get sound from the speakers of your desktop computer, and I would be happy to assist you in this matter! Do you speakers work on another computer? Is there any software you need to install to properly configure your speakers on your system? In the meantime, I recommend following the steps in this document on No Sound from the Speakers (Windows 8). This should help return the sound to your computer using your speakers. I also recommend returning your system back to a previous restore point before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • When playing music through the audio port on my macbook pro only the left speakers/headphones work. external speakers are fine!

    I am having problems with the 3.5mm audio jack on my mac book pro. its been just over a year and now when i connect 3.5 headphones or speakers they only play the left speakers. the right speakers do not work.

    If you go to System Preferences (from the Apple menu) > Sound and select Output, how is the Balance slider set? If it is all the way to the left, put it in the middle.
    Best of luck.

  • Satellite L300 - can headphone and speakers work simultaneously?

    I have a Satellite L300 with self-installed Windows XP (Realtek Sound Driver 5.10.0.5559 from Toshiba website).
    Plugging the headphones turns the speakers off. I want that speakers and headphones working simultaneously. What can I do? Thank you for help.
    Sincerely H. Reinhold

    Thank you for your answer.
    1. I think, it is not a "mechanism in the headphone jack", because if I plug the Headphone, the speakers turn off not immediately but a short time later. So I think it must be a software action.
    2. "But why do you want to have both of them working simultaneously?"
    I want to trigger an electronic control when a sound signal is starting and parallel I will hear the sound. If the headphone speaker switching would be a software action, I need no external speakers, as you have suggested. A change in the configuration is always the most elegant solution. That's why my asking.

  • Want my Headphones and Speakers to work at the same t

    Hiya. I have an Audigy 2 ZS. I can't figure out how to get my headphones and speakers working simultaneously. I'm sure i used to be able to rig it up like that. Now i can't figure out how i used to do it. I don't have a splitter of any kind. I have the option "Mute speakers when headphone jack is detected" unchecked. One thing i do remember is that i used to have to turn up my speakers real loud so i could hear stuff from my computer, louder than should of been needed. Hope someone can help, thanks.

    ropeadope wrote:
    Hiya. I have an Audigy 2 ZS. I can't figure out how to get my headphones and speakers working simultaneously. I'm sure i used to be able to rig it up like that. Now i can't figure out how i used to do it. I don't have a splitter of any kind. I have the option "Mute speakers when headphone jack is detected" unchecked. One thing i do remember is that i used to have to turn up my speakers real loud so i could hear stuff from my computer, louder than should of been needed. Hope someone can help, thanks.
    Both stereo?
    Same source (same music out from both):
    - speakers to Front L/R, Headphones to Rear L/R (or vice versa)
    - speakers set to 4/4.
    (- CMSS to Stereo Surround (if not already working w/ above settings))
    Diri'ver modes on software:
    DirectSound and MME - channels /2 (this is default),
    WDM(/KS) (and Asio4All) - channels 3/4
    ASIO --> Wave R/L
    Different sources (one player outputs through Front L/R, the other through Rear L/R):
    - speakers to Front L/R, Headphones to Rear L/R (or vice versa)
    - speakers 4/4.
    - CMSS disabled
    - software that allows free output channel selection for second source (like NI Traktor BeatportPlayer, Foobar2000, etc.)
    - your current player outputs through "Front L/R", the other player is set to output through "Rear L/R"
    Driver modes:
    WDM(/KS) (and Asio4All) - channels /2 or 7/6 = Front L/R, 5/6 = Rear L/R
    ASIO - outputs 2/3 Front L/R, 4/5 Rear L/R
    NOTE:
    Above settings works w/ Audigy 2 (6. card). If not w/ Zs, it's quite easy to find those settings which works for it.
    - http://www.nati've-instruments.com/index.php?id=beatportplayer_us
    - www.foobar2000.org
    - www.asio4all.com (you need this w/ non ASIO card only (Li've!, Li've!24-bit, older, Audigy SE, LS,...))
    jutapaMessage Edited by jutapa on 08-9-2006 0:47 PM

  • My laptop speakers are not working but my headphones work fine

    I have an HP Pavilion g6-1d73us laptop and although my headphones work properly the speakers do not. This is a recent problem.  I have tried troubleshooting with windows troubleshooter with no results. I have checked all the drivers for audio and they check out fine. I have tried driver software with no success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try?   Carl
    This question was solved.
    View Solution.

    Hello @hifive11,
    I have read your post on how your notebook speakers are not working, but the headphones work fine, and I would be happy to assist you in this matter!
    The first step I recommend is to follow this document on No Sound from the Speakers (Windows 7). This should help to restore the sound to your speakers. 
    You can also enable the speakers on your computer as the default playback device. This can be done by following the steps below:
    1. Click the Start button
    2. Click Control Panel
    3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
    4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's headset device). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
    5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
    6. Test your speakers
    If the issue continues, I recommend returning your notebook to a previous restore point before the speakers stopped working. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Internal speakers suddenly will not unmute.  My headphones work, and there is a red light coming from the headphone jack

    I put my volume on mute a few weeks ago, and I don't know if I have used it again since then or not, but now the volume will not unmute.  There is a red light glowing out of the headphone jack.  Sound through headphones works.  I've tried updating and restarting my computer.  Help?

    No, not forceful - gentle.
    A PRAM-reset might also help:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Try this a few times.
    Stefan

  • My iPhone 4 will not let me play my music I bought on iTunes or pandora or YouTube with out my headphones or speakers plugged in. I can play my ringtone without them plugged in but that's all. Also my iPhone will not turn off. Please help

    I tried resisting my phone it didnt work. Please help? This is the first time it has ever happens and has been doing it for a week. The sound will only play without headphones or speakers is when I'm listening to my ringtone. And my phone won't turn off. It turns off then just turns back on.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Maybe you are looking for

  • Constantly getting Download Error in Creative Cloud Manager, Apps tab. No further information, simply states "Contact customer support"

    Photoshop, Illustrator and Flash have all been successfully installed on this computer via Creative Cloud. Recently, the below screen keeps appearing when attempting to access the Apps tab. Please advise.

  • Message comming as alert  !!

    Hi I have a program unit in my form, I am using a cursor for inserting records in a table and displaying a message after each insert with " message (...)" inside the loop. the problem is that the message is comming as an alert for all the records ins

  • RNIF adapter error - Transmitting the message to endpoint failed

    Hi I have developed one interface SAPR/3 - PI - RNIF (Vendor system). the communication happens from PI to Vendor  via HTTPS protocol, the SSL certificates has been installed on PI J2EE engine, and configured in RNIF receiver communication channel. B

  • How to downgrade an app?

    Is there any way of downgrading an app? (I have updated all apps, but now one of them doesn't get copied to the iphone because it was compiled for FW 2.2.1, but my iphone is still on 2.2 -- and I'd like to stick with 2.2 for a while ...) Thanks a lot

  • Serial will not connect unless MAX has been started

    Hello All, I am using Labview 7.0 , MAX 4.6.0f1, NI-VISA 3.0, Windows XP. A Microchip PIC USB device is attached to the Labview PC, the PIC embedded code registers as a Virtual Serial port and behaves as expected, I use Labview to read and writes sim