Heads-up: bug introduced into CFABORT & CFLOCATION in CF9

G'day
This is just a heads-up about a not-insignificant bug Ben Nadel has spotted with CFABORT (and the same thing applies to CFLOCATION) in CF9.
The blog entry is here:
http://www.bennadel.com/blog/2221-CFAbort-And-OnRequestEnd-Behavior-In-ColdFusion-8-And-Co ldFusion-9.htm
The short version is that prior to CF9, CFABORT meant "abort processing". In CF9, it now only kinda aborts processing, as whilst it halts "mainline" code from running, it still executes onRequestEnd().
It seems that this change came about from a "bug" raised with Adobe here:
http://cfbugs.adobe.com/cfbugreport/flexbugui/cfbugtracker/main.html#bugId=80798
This is not a bug (Mark's raised it as a bug, not an enhancement request), as it's been the way CFABORT had always previously worked. I can see an argument as to how Mark's suggestion could be handy, but monkeying with CFABORT's default behaviour was not the solution here.
We've just upgraded our CF servers to CF9, and now we need to recode certain parts of our app to work around this. So we're not overly happy about this.
I've raised a bug report suggesting this change is backed out and delivered as a hotfix:
http://cfbugs.adobe.com/cfbugreport/flexbugui/cfbugtracker/main.html#bugId=86960
If it's the sort of thing that would affect you - or if you're just as annoyed as I am about Adobe changing the default behaviour of its really really fundamental tags for no good (/well-thought-out ~) reason, then pls vote for it.
Cheers.
Adam

That is indeed ridiculous, I've added my vote.

Similar Messages

N80 Gallery Bug introduced in firmare 5.0719.0.2

In case you guys from Nokia didnt notice it yet ...
There was a new bug introduced into the Gallery application of the Nokia N80 with Firmware 5.0719.0.2.
The bug looks as following:
If you open the Picture Gallery there simply wont be any pictures or videos shown (from both internal memory and memory card). All one can see are the two weblinks in the gallery.
Only thing that help to bring the Gallery back to normal condition is to reboot the phone.
Several people who have upgraded to 5.0719.0.2 have this problem. And it definitely was not there before in any other Firmware Version 3.x or 4.x.
Is Nokia already aware of this bug and will fix it in a future firmware release? It really annoys me a lot. So much that i already think of buying a new phone from another manufacturer.
Besides ... Why doesnt Nokia release the 5.0725.0.1 firmware for European N80s? Maybe the bug is already corrected in this newer firmware...

Hey
To tell the truth this is one of the most common most annoying and of course older bug from N73, N80, N91.
Later nokia introduced new gallery in N93, N93i and N91 8GB.
I discussed a tip here:/discussions/board/message?board.id=smartphones&message.id=54784&page=1
It would just **bleep** me off.Message Edited by korngear on 04-Oct-200704:31 PM

New bug introduced with Keynote 5.2 - Set timing and order of each build has stopped working properly on Smart Builds

Hi there,
We're heavy users of Keynote and have noticed a new bug has recently been introduced into something that was stable. I think it has emerged in Keynote 5.2, could have been Keynote 5.1 also.
It's in the area of Set Timing and Order of each build when used on a Smartbuild. You can no longer set the Start Build field for each instance within the Smart build when the instances are interspersed between other items. The Start build field is just blank and unselectable.
To see this :
1. Create a bullet point list with 4 lines
2. Set build to Appear
3. Set "Set Timing and Order of each Build" to on
4. Create a Smart Build - set to flip
5. On the Smart Build Set "Set Timing and Order of each Build" to on
5. re-order the items in your Build Order so that they alternate between the bullet point and the smart build flip
At this point, you used to be able to set the bullets so that they Started on Click and then set the smart builds to Start with previous. This gave you a nice and very useful effect where you could click to reveal a bullet point and at the same time flip in a corresponding image. We've used this loads of times in our company presentations.
With a recent keynote update ( I think 5.2 maybe, could have been 5.1) this functinality has been lost. have tried it on Lion and Mountain Lion and it's not an OS issue, its a Keynote issue.
Could anyone from Apple acknowledge that they know the issue and suggest if it will get fixed? Right now we're hunting round for an old Keynote 9 DVD so we can install a pre build 5.2 version.
Thanks

Hi glennelliott72,
I've noticed the bug you describe and to me it's very irritating.
I also found some differences in the build menu between the last release and the previous one, and between the Mac OS X and iOS versions. For instance, the blast build doesn't exist anymore in Keynote 5.2 but it's still in the version for iOS 6.
What is your experience about?
I currently use OX Lion.
Thank you

Header Text from VF01 into Line layout of F-30

Good day..
i Need help on this
I need to display the header text from VF01 into F-30 line layout
or
display the text field from fbl5n into line layout of F-30 Process Open Items.
thank you in advance

Hi,
As per your requirement is possible through by develop the Z tcode that means Zf-30, why because you didnt post the only acounting documents in this particular Tcode
Is this ok for you means, talk with the abper they will the changes as per your reuirement
Regards,
Kanike

[svn] 3149: Fix bugs introduced by the display object sharing optimization.

Revision: 3149
Author: [email protected]
Date: 2008-09-08 16:58:35 -0700 (Mon, 08 Sep 2008)
Log Message:
Fix bugs introduced by the display object sharing optimization. This checkin should fix ordering problems when dynamically adding/removing graphic elements, and ordering problems when changing graphic element properties that require a display object (rotation, alpha, filters, etc).
Bugs:
MXMLG-219: BitmapGraphic component content always rendered from 0, 0 origin.
MXMLG-220: setting visible property of Rect and Ellipse does nothing.
MXMLG-222: setting the alpha of a rectangle changes z-order when there are 3 or more rectangles
SDK-16754: Z-order incorrect when a Group is present
QA: Yes - the test files from these bugs (or something equivalent) should be added to our standard test suite
Reviewer: Deepa
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-219
http://bugs.adobe.com/jira/browse/MXMLG-220
http://bugs.adobe.com/jira/browse/MXMLG-222
http://bugs.adobe.com/jira/browse/SDK-16754
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/BitmapGraphic.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

This is the great thread ;-)
My favorite threads are below.
Munky posted great reply :8}
SQL Query Help
order in a connect by

How can I swap or cut & paste a head from one photo into another for a holiday photo using aperture or photoshop?

I've got an almost perfect family photo that I need to swap one face in as my son was not looking at the camera and I can't redo the shoot. Anyone know how to take a headshot from one pic and swap it into another using Aperture or Photoshop? Thanks!

select the head with one of Photoshop's selection tools
When doing this, I find it quite helpful to create an intermediate image with a transparent background that contains only the head to be pasted into the second image. First I paste the head onto this transparent background, scale it, rotate it or skew it to make it fit into the other image, adjust the lighting, then select it.
To be able to paste the head seemlessly into the second image (and without aliasing effects), I make the border of the selection soft (⌥⌘D); my Photoshop has a german interface, so I am not sure about the english localization, this command must be something like "selection -> modify selection -> soft border".
I would not bother to get the lighting and color excactly right in Photoshop, that is far easier with the "dodge" and "burn" brushes and color adjustments in Aperture.
To do this completely in Aperture, you would have first to combine both images into one (for example by creating a book page), then use the retouche->clone tool to stamp the head from one image to the other. I use this occasionally to stamp a face into a flower bud or for similar effects. However, for this to work you need a plain background and nearly circular shapes to be pasted.
Léonie

[svn] 1388: Fixing a bug introduced for DefineFont3 equality testing.

Revision: 1388
Author: [email protected]
Date: 2008-04-24 10:19:44 -0700 (Thu, 24 Apr 2008)
Log Message:
Fixing a bug introduced for DefineFont3 equality testing. DefineFontAlignZones already checks its DefineFont3 for equality and so this goes back to the old behavior and avoid an infinite equality check.
Doc: No
QA: Yes, also please add a test case that makes use of two, duplicated embedded fonts with advanced anti-aliasing to the automated mxunit testsuite.
Bug: SDK-15378
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15378
Modified Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java

I just posted something about this too, and while I feel that its wrong to "bump" an old post, this issue has still stayed unresolved and my frustration is peaking. In my thread my problem is i can't even use the KXdrivers on an x64 operating system, so this things an expensi've paper weight. Great.
Creative makes good sound cards, NO DOUBT about that. Their customer service on the other hand however, is absolute trash. I have read that "statement" as well, and it seems an easy way out to just say "yeah we addressed it, so please, shut up about it already". And I agree, it is NOT a fix, for all of us. If one would take the time to read the forum, its not only ABIT motherboards. Even in that one thread, one if the first couple of replies a guy says "but I have a gigabyte motherboard". Surprise surprise, he was ignored by the mod who posted that (she answered some other poster's question with "read the instructions please" . Please creative, give us some faith back in your company by helping out the many of us with this problem. Only then will I reccomend and buy your products.

H.264 Video Encoding Bug Introduced?

I'm not sure if the issue is related to a fix for a previous bug, or just a new bug introduced for this player.
My original problem was with the reporting of Camera.activityLevel. It only reports 0 and 100 when encoding with H.264 in FP11+ release, Sorenson reports the results properly. I was told it was fixed in this beta, which it does appear to be
See this post: http://forums.adobe.com/message/3999479
However I now see a new problem in this beta. My application allows me to change the video settings on my H.264 encoded stream (quality, resolution, fps, etc) during the broadcast. And it works perfectly in FP11+. However, with the beta it now appears to cause problems and be broken.
Changing settings on an existing stream (it looks to be when changing from 320x240 to 640x480) causes streaks of red, green, and blue vertical lines over the video image and the aspect ratio is wrong. The image appears squished - everything short and fat like mabe it's increaing the width value, but not the height. I'm testing the beta on Windows 32bit IE7 with a Logitech 9000 and on a different machine using Windows 32bit IE8 with a Logitech C910 with the same results.
The camera.width & camera.height properties to seem to report their values properly, but the stream as viewed on the server is definitely not at the correct resolution.
Can anyone verify this or advise? This version looks like it will break my app if released so thankfully it's still a beta.
Thank you!

OK, in FP11 Beta 2 it appears you have fixed this bug (aspect ratio messed up when switching from 320x240 to 640x480), but now you've reintroduced the Camera.activityLevel bug again. It only reports 0 and 100, this was fixed in Beta 1.
To summarize:
FP 11 release
Camera.activityLevel - broken, only reports 0 and 100
Changing camera size from 320x240 to 640x480 - works
FP 11.2 beta 1
Camera.activityLevel - fixed
Changing camera size from 320x240 to 640x480 - broken, turns video from color to black and white and has a strange aspect ratio
FP 11.2 beta 2
Camera.activityLevel - broken, only reports 0 and 100
Changing camera size from 320x240 to 640x480 - works
Hopefully you'll have everything working in beta 3.
Do I need to submit a bug report for the Camera.activityLevel bug in FP 11.2 Beta 2?

[svn] 3780: Fix for bug introduced yesterday when adding clipContent to FxContainer and FxDataContainer .

Revision: 3780
Author: [email protected]
Date: 2008-10-21 10:51:40 -0700 (Tue, 21 Oct 2008)
Log Message:
Fix for bug introduced yesterday when adding clipContent to FxContainer and FxDataContainer. The default value needs to be true.
Also fixing a bug in SystemManager since application isn't always an IRawChildrenContainer anymore. This was previously fixed and got clobbered in a merge.
QE Notes: None
Doc Notes: None
Bugs: SDK-17423, SDK-17697
Reviewer: Hans
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17423
http://bugs.adobe.com/jira/browse/SDK-17697
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxContainer.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxDataContainer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as

The network admin solved the problem:
“When I recreated the User Profile Service, I did not enable “NetBIOS Name” on the service, so all user accounts did not have the proper domain, which is why none of the targeting worked.
All users were listed as corp\username instead of rcd\username.”, Network Admin.
Further information: http://www.windowsclever.com/sharepoint/netbios-name-is-different-domain-name-user-profie-service-sharepoint-2010.html

Hello, my iphon 5 shall fall to the water 4 days ago when it happened and wipe dry with a hairdryer. We introduced into a pot of rice for 2 days. Operates normally. to expect now, will be good or fail any function?

hello, my iphon 5 shall fall to the water 4 days ago when it happened and wipe dry with a hairdryer. We introduced into a pot of rice for 2 days. Operates normally. to expect now, will be good or fail any function?

I have seen MANY VIDEOS ON yotoube on how to handle the situation in the mobile water, it was a horror!
and also heard that the starch can be harmful. if not scientifically correct to use rice, but anything goes despair

Another bug introduced by 6u10 ?

Here is another possible bug introduced by 6u10. Looks like that the feature of setLookAndFeel under 6u10 breaks Mouse Listener.
See the short test program below, which works fine under 6u7 but fails under 6u10.
Here are the test steps :
1.     Click on menu but dont click on any menu items.
2.     Move mouse to the white area (JPanel)
3.     Click mouse once. Nothing happens but it should draw a red dot. The mouse listener does not recognize the first click. The subsequent clicks are fine.
If you perform this test under 6u7, it works fine ( recognize the first mouse click) . If you take out setLookAndFeel, it works fine also. Anyone knows a workaround.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class MouseClickTest extends JFrame
     static int sxw=800;
     static int sxh=800;
     int mx, my;
     JPanel jpl;
     public MouseClickTest()
          init();
     private void init()
          jpl =new JPanel()
               public void paintComponent(Graphics g)
                    Graphics2D g2=(Graphics2D) g;
                    g2.setColor(Color.white);
                    g2.fillRect(0,0,800,800);
                    if ( mx > 0 && my > 0 )
                         g2.setColor(Color.red);
                         g2.fillOval(mx,my, 20,20);
          jpl.setPreferredSize(new Dimension(sxw, sxh));
          jpl.addMouseListener(new MouseAdapter(){
          public void mousePressed(MouseEvent e)
               mx=e.getX();
               my=e.getY();
               jpl.repaint();
          JMenuBar mb = new JMenuBar();
                  JMenu menu = new JMenu("menu");
                  for(int i=0; i<5; i++)
               menu.add(new JMenuItem("Item "+i));
                  mb.add(menu);
          setJMenuBar(mb);
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(jpl, BorderLayout.CENTER);
          setSize(800,800);
          pack();
          setVisible(true);
           addWindowListener(new WindowAdapter() {
                 public void windowClosing(WindowEvent ev) {
                          System.exit(0);
     public static void main(String[] args)
          try {
               //this is ok.
               //UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
               //these are bad
               //UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
                         UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
               //UIManager.setLookAndFeel("com.sun.java.swing.plaf.nimbus.NimbusLookAndFeel");
              catch (Exception e) {     }
          SwingUtilities.invokeLater(new Runnable()
                   public void run()
                    new MouseClickTest();
}

I can confirm that the behavior is different in 6u10. If a JMenu or JPopupMenu is displayed, and the user clicks on some other part of the GUI to hide the popup, that part of the GUI doesn't actually receive (or react to) a MouseEvent. If you click on an unselected tab, for example, that tab doesn't become the active tab, whereas in 1.5 and 1.4 (and according to the OP, 1.6 pre 6u10), it did.
Is this really a "bug"? I suppose it is. Native Windows appears to send mouse events to items when a popup menu is dismissed with a click. But why does your application rely on this behavior - that is, why is this change so serious to you?
Oh, and XOR painting isn't broken in 6u10, it's just unusably slow. :)

Possible cfdocument header/footer bug in CF8

All-
I'm experiencing a problem with header and footers containing
dynamic/
query variables in the header/footer text. The header and
footer are
sort of being cached or not being updated appropriately when
a query
variable is inserted into the content of the header or
footer. The
code below will generate a PDF with the header and footer
duplicating
the qryReps.rep_name from the last record across all document
sections/pages.....its not showing the showing the correct
qryReps.rep_name for
the particular record in that loop. SO, if the last record in
the
query is "John Doe", the header on EVERY PAGE shows "Header:
John
Doe". Anyone have any ideas??? Any input would be
appreciated!!!
NOTE: RUNNING ON CF8

This bug has been fixed and a hotfix for this will be
released very soon. Stay tuned.

Monitor Profile still being introduced into RGB print-flow from 6.0.2

Nothing has changed with this bug that was introduced when IDCS3 was released and what ever the current OS was at the time. To my knowledge neither Adobe or Apple have acknowledged this bug in all this time.
These workarounds still apply. Select "Print as Bitmap" or if you have a Canon driver that you can select "Fast Graphic Process" which bypass Apple's printing process. The other option is to create a separate paper profile for ID, but anytime you re-calibrate and then profile your monitor you could introduce changes into your print.
Can't say who is to blame for this one but it is a shame it never gets fixed after all this time.

Start by turning everything off.
If you are trying to use Print To Video back to your camera/deck, connect the unit to your mac via firewire, then turn it on, vcr mode, and load your tape.
Now, turn on the mac, and launch FCP.
Close your project, or any other that opens.
Choose the DV NTSC Easy Setup.
Open your project, and select the sequence you want to play out in the browser.
Now, you will want to turn external video to OFF.
Choose Print To Video, set your slate, color bars, etc.
Check the Start Recording Automatically box.
Hit OK, and your camera/deck should begin to record.

Export header of alv-oo into excel

When I export an alv function into excel also exports the header but when I'm working with alv-oo doesn't export the header.
How can I do to export into excel also the header of the alv-oo??
Thanks a lot!!!

Hi,
I think Field catalog not set properly.
Otherwise u can provide one pushbutton OR use same standard Button & in the coding part use 'WS_DOWNLOAD' function module.
It will work. U can pass header data also in this & also provide path using F4_FILENAMEu2019 function module.
salil

Header Partners not flowing into items in SAP CRM order and the same in ERP

Hi SAP Experts,
Our SAP CRM is upgraded from 4.0 to 7.0 version and ECC5.0 to ECC6.0 as well last year.
Initially , when the order is created in SAP CRM , the partners (sold to , ship to , payer and bill to ) are flowing to all items(same as header) and the same is transferring into ECC6.0 at header and items. Now if the partners are changed at header in CRM then those are not propagating to items and in ECC 6.0 at the header the partners are synchronized but at the items partners are not synchronizing(showing the same old values).
Can anyone provide solution for this issue.
Thanks in advance.
Best Regards
Succhi

Hello Screedhar,
From your description, seems that the cross system lock is not set up correctly in your system.
Please check SAP note 888665 which talks about how to set the cross system lock.
Best regards,
Maggie

Heads-up: bug introduced into CFABORT & CFLOCATION in CF9

Similar Messages

Maybe you are looking for