HEADS UP! New Oracle Hotnews note was released today!

Hi!
In case you didn't know this already. A new SAP Hotnews was released.
2011199 - SAP Bundle Patches (SBP) - structure changes starting with June 2014
As this is a major change in the patching procedure, you may read this before planning any SBP installation.
Regards,
János

Hi Jim,
Yes, right.
11.2.0.2 and older releases are no longer supported from Oracle (means from SAP as well), so these do not receive any SBP further on. We could say, currently 11.2.0.3 and 11.2.0.4 only is touched by this change.
The same procedure, changing the Oracle_Home is possible within the same release as well. Meaning, setting up a new Oracle_Home (install software) install the SBP there and use this new Oracle_Home for the same Oracle Instance later on. So the downtime, is minimal.
The whole procedure is documented in the below note:
1696869 Patching of Oracle Homes with Minimal Downtime
Regards,
János

Similar Messages

  • User Name by which Credit Note was released through VF02

    Hi,
    I have a Credit Note Number - 90010554 on dated 03.02.10.
    I want to know that by which User, Credit Note was released through VF02.
    Regards..

    Hi Mr. ABAP,
    If it relased by VF02 then there are chances that you can find the user name in the change log of billing document
    VF02 --> Enter billing document --> Enviroment --> Changes
    Or you go to accounting document
    Click at Header "Cap Icon" --> Check the feild "Entered by"
    Hope this Helps.
    Regards,
    MT

  • I pre-ordered an album on my iPod touch and it was released today but it hasn't showed up in my music or purchased. How do i get the music on to my iPod

    I pre-ordered an album on my iPod touch and it was released today but it hasn't showed up in my music or purchased. How do i get the music on to my iPod

    Pre-order items from the iTunes Store
    If an item isn’t yet available, you may be able to pre-order and then download it when it becomes available.
    Pre-order an item: Click the Pre-order button next to the item. When the item is available for download, you receive an email notice. You aren’t charged for the item until you download it.
    Download a pre-ordered item: Click the link in the email notice or open iTunes and choose Store > Check for Available Downloads.
    View, cancel, or see the expected release dates for pending pre-orders: Choose Store > View My Apple ID, and click Manage Pre-orders.
    When you pre-order an item, you may not be able to download it at the exact moment it becomes available for regular purchase. You’ll receive an email the same day it becomes available to let you know when you can download the item.
    Some albums or collections you can pre-order include a song that’s available to download immediately. When you pre-order these items, the available song is downloaded and you’re charged only for that song. When you download the rest of the album (after you’re notified it’s available), you’re charged for the rest.
    Have you tried here:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • "FCE 4.0 Foparillo"  - Apple's NEW UB Version of FCE Released Today!

    Sorry to raise your hopes falsely folks - but "Foparillo" is an anagram of "April Fool".*
    Ian.
    *(In the UK and certain other "civilised" countries there is a time-honoured tradition of playing practical jokes on unsuspecting people, on April 1st. Could that be used as the theme for a Video Project, edited of course, on FCEs 1 to 3.0?)
    Also note, unlike "Star Trek", there is no split infinitive!
    More Info for the historically minded:-
    April Fools' Day, or All Fools' Day, is the first day of April. In many countries, including the United States, it is the custom on this day to play tricks on people. A favorite joke is to send someone on a fool's errand, a search for something that does not exist. In the United States, the victim is called an April Fool.
    No one knows where the April Fools' custom began. But some historians believe it may have started in France. There, the old New Year's festival was observed from March 25 to April 1 and ended with an exchange of gifts. In the mid-1560's, King Charles IX changed the New Year to January 1. People who still celebrated the New Year in April were called April fish and sent mock presents. April Fools' Day may be related to the ancient Roman spring festival Hilaria, which celebrates the resurrection of the god Attis.
    Contributed by - Santino, Jack, Ph.D., Professor of Popular Culture, Bowling Green State University.

    Mircea Eliade, in one of his many fascinating books, I think Cosmos and History, recounts how for some cultures the weight of history is too much; and that periodical cleansing of the culture is necessary and good-- How do you cleanse a culture? By turning everything upside down, by releasing chaos for a limited period, by electing a mock king or queen for a day, by throwing a bachanalian rite or Mardi Gras or whatever where everyone gets blasted, does really strange stuff they couldn't get away with in real life etc.
    Personally I think the April Fool is a remnant of that.

  • I recently pre ordered an album and it was released today but it says I have to pay even though I already have

    I pre ordered an album maybe a month ago, and it just came out today. They released some of the songs before hand and I have all 5 of those on my phone. But today when the whole album was released it didn't download to my phone. I went and checked the ITunes store and it said i never bought it even though it did. HELP ME!!

    Yeah it happened I me too! I thought that I was the only one. I need the 5sos album like now 

  • New OracleAS Portal 10g Courses Released

    Oracle University has released two new classes for OracleAS Portal 10g: OracleAS Portal 10g: Build Corporate Portals and OracleAS Portal 10g: Build Portlets with PL/SQL. The first sessions are in February in the US in Reston, VA. These are the very first hand-on classes on Oracle Application Server 10g.
    A third class, OracleAS Portal 10g: Build Portlets with Java, will be released soon too.

    The links did come through properly... Let's try them again:
    http://education.oracle.com/web_prod-plq-dad/plsql/show_desc.redirect?dc=D16648GC10&p_org_id=1001〈=US&source_call=
    http://education.oracle.com/web_prod-plq-dad/plsql/show_desc.redirect?dc=D16652GC10&p_org_id=1001〈=US&source_call=

  • New OracleAS Portal 10g Classes Released

    Oracle University has released two new classes for OracleAS Portal 10g: OracleAS Portal 10g: Build Corporate Portals and OracleAS Portal 10g: Build Portlets with PL/SQL. The first sessions are in February in the US in Reston, VA. These are the very first hand-on classes on Oracle Application Server 10g.
    A third class, OracleAS Portal 10g: Build Portlets with Java, will be released soon too.

    The links did come through properly... Let's try them again:
    http://education.oracle.com/web_prod-plq-dad/plsql/show_desc.redirect?dc=D16648GC10&p_org_id=1001&lang=US&source_call=
    http://education.oracle.com/web_prod-plq-dad/plsql/show_desc.redirect?dc=D16652GC10&p_org_id=1001&lang=US&source_call=

  • HT1338 Before I bought my new macbook pro in july, the apple store said that I would get a free upgrade to the new software when it was released. where can I go for this?

    Before I bought my new macbook pro in july the apple store said that I would get a free software upgrade when it was available (to the new os x...). Where can I go to get this??

    Use this form.
    (69043)

  • New Oracle Application Server 10g Release 2 (10.1.2) Deploy

    Hi,
    I downloaded the "NEW"" version and tried to deploy my war files. It take forever!??!? it worked fine on the previous version.
    Any Idea?!
    Thanks,
    EA

    Hi,
    1. All war files that I deploy are about ~50k
    2. No EJB only servlets and jsp
    3. Here is an example for deployment command that I uses: dcmctl deployApplication -f %APP_HOME%\alarm.war -a alarm-app -co %COMPONENT_NAME% -rc /alarm
    4. No, we're using IAS java edition (container and http server)
    Best,
    EA

  • I pay a monthy fee for LR and PS...Do I have to wait until my year is up to get the new LR that was released today?

    Any insight?

    If you open the Cloud desktop app you can view your installed apps.  If the update is available (it should be) you'll see an update button/link on the right.  Just click on it start the update.

  • The Instant Client SDK on Linux was released today

    The 10.1.0.3 Linux Instant Client SDK was posted on OTN today. See
    http://www.oracle.com/technology/tech/oci/instantclient/instantclient.html
    You can now use Instant Client to compile PHP. You need to modify
    PHPs configuration scripts first. One suggested change is given in
    PHP bug http://bugs.php.net/bug.php?id=31084 The diff in the bug is a
    little awkwardly wrapped. Here it is again for ease of
    cutting/pasting. See the bug for the other instructions.
    -- CJ
    --- ext/oci8/config.m4.orig     2004-02-04 01:22:34.000000000 +1100
    +++ ext/oci8/config.m4     2004-12-14 18:36:21.000000000 +1100
    @@ -38,16 +38,46 @@
           OCI8_VERSION=8.1
         fi
       else
    -    AC_MSG_ERROR(Oracle-OCI8 needed libraries not found)
    +    AC_MSG_ERROR([Oracle (OCI8) required libraries not found])
       fi
       AC_MSG_RESULT($OCI8_VERSION)
    -PHP_ARG_WITH(oci8, for Oracle-OCI8 support,
    -[  --with-oci8[=DIR]       Include Oracle-oci8 support. Default DIR is ORACLE_HOME.])
    +AC_DEFUN(AC_OCI8IC_VERSION,[
    +  AC_MSG_CHECKING([Oracle Instant Client version])
    +  if test -f $PHP_OCI8_INSTANT_CLIENT/libociei.$SHLIB_SUFFIX_NAME; then
    +    if test -f $PHP_OCI8_INSTANT_CLIENT/libclntsh.$SHLIB_SUFFIX_NAME.10.1; then
    +      if test ! -f $PHP_OCI8_INSTANT_CLIENT/libclntsh.$SHLIB_SUFFIX_NAME; then
    +        AC_MSG_ERROR([Link from $PHP_OCI8_INSTANT_CLIENT/libclntsh.$SHLIB_SUFFIX_NAME to libclntsh.$SHLIB_SUFFIX_NAME.10.1 not found])
    +      fi
    +      OCI8_VERSION=10.1
    +    else
    +      AC_MSG_ERROR([Oracle Instant Client library version not supported])
    +    fi
    +  else
    +    AC_MSG_ERROR([Oracle Instant Client libraries not found])
    +  fi
    +  AC_MSG_RESULT([$OCI8_VERSION])
    +])
    +
    +PHP_ARG_WITH(oci8, for Oracle (OCI8) support using ORACLE_HOME installation,
    +[  --with-oci8[[=DIR]]     Include Oracle (OCI8) support using an ORACLE_HOME
    +                        install. The default DIR is ORACLE_HOME])
    +
    +PHP_ARG_WITH(oci8-instant-client, for Oracle (OCI8) support using Oracle Instant Client,
    +[  --with-oci8-instant-client[[=DIR]]    Include Oracle (OCI8) support using
    +                        Oracle Instant Client. DIR is the directory with the
    +                        Instant Client libraries. On Linux it will default to
    +                        /usr/lib/oracle/<most_recent_version>/client/lib
    +                        Other platforms will need to have it explicitly specified.])
    if test "$PHP_OCI8" != "no"; then
    -  AC_MSG_CHECKING([Oracle Install-Dir])
    +
    +  if test "$PHP_OCI8_INSTANT_CLIENT" != "no"; then
    +    AC_MSG_ERROR([--with-oci8 and --with-oci8-instant-client are mutually exclusive])
    +  fi
    +
    +  AC_MSG_CHECKING([Oracle Install Directory])
       if test "$PHP_OCI8" = "yes"; then
         OCI8_DIR=$ORACLE_HOME
       else
    @@ -116,14 +146,18 @@
             -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    +
         10.1)
           PHP_ADD_LIBRARY(clntsh, 1, OCI8_SHARED_LIBADD)
           PHP_ADD_LIBPATH($OCI8_DIR/lib, OCI8_SHARED_LIBADD)
           AC_DEFINE(HAVE_OCI8_ATTR_STATEMENT,1,[ ])
           AC_DEFINE(HAVE_OCI_9_2,1,[ ])
    +      AC_DEFINE(HAVE_OCI8_TEMP_LOB,1,[ ])
    +      AC_DEFINE(PHP_OCI8_HAVE_COLLECTIONS,1,[ ])
    +
    -      AC_MSG_ERROR(Unsupported Oracle version!)
    +      AC_MSG_ERROR([Unsupported Oracle version])
       esac
    @@ -145,10 +179,88 @@
         -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    +  dnl
    +  dnl Check if we have collections
    +  dnl
    +  PHP_CHECK_LIBRARY(clntsh, OCICollAssign,
    +  [
    +    AC_DEFINE(PHP_OCI8_HAVE_COLLECTIONS,1,[ ])
    +  ], [], [
    +    -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    +  ])
    +
    +
       PHP_NEW_EXTENSION(oci8, oci8.c, $ext_shared)
       AC_DEFINE(HAVE_OCI8,1,[ ])
       PHP_SUBST_OLD(OCI8_SHARED_LIBADD)
       PHP_SUBST_OLD(OCI8_DIR)
       PHP_SUBST_OLD(OCI8_VERSION)
    +
    +elif test "$PHP_OCI8_INSTANT_CLIENT" != "no"; then
    +
    +  AC_MSG_CHECKING([Oracle Instant Client directory])
    +  if test "$PHP_OCI8_INSTANT_CLIENT" = "yes"; then
    +dnl Generally the Instant Client can be anywhere so the user must pass in the
    +dnl directory to the libraries.  But on Linux we default to the most recent
    +dnl version in /usr/lib
    +    PHP_OCI8_INSTANT_CLIENT=`ls -d /usr/lib/oracle/*/client/lib  2> /dev/null | tail -1`
    +    if test -z "$PHP_OCI8_INSTANT_CLIENT"; then
    +      AC_MSG_ERROR([Oracle Instant Client directory not found. Try --with-oci8-instant-client=DIR])
    +    fi
    +  fi
    +  AC_MSG_RESULT($PHP_OCI8_INSTANT_CLIENT)
    +
    +  OCI8_DIR=$PHP_OCI8_INSTANT_CLIENT
    +
    +  AC_MSG_CHECKING([Oracle Instant Client SDK header directory])
    +
    +dnl Header directory for Instant Client SDK RPM install
    +  OCISDKRPMINC=`echo "$PHP_OCI8_INSTANT_CLIENT" | sed -e 's!^/usr/lib/oracle/\(.*\)/client/lib[[/]]*$!/usr/include/oracle/\1/client!'`
    +
    +dnl Header directory for Instant Client SDK zip file install
    +  OCISDKZIPINC=$PHP_OCI8_INSTANT_CLIENT/sdk/include
    +
    +  if test -f "$OCISDKRPMINC/oci.h"; then
    +    AC_MSG_RESULT($OCISDKRPMINC)
    +    PHP_ADD_INCLUDE($OCISDKRPMINC)
    +    OCI8INCDIR=$OCISDKRPMINC
    +  elif test -f "$OCISDKZIPINC/oci.h"; then
    +    AC_MSG_RESULT($OCISDKZIPINC)
    +    PHP_ADD_INCLUDE($OCISDKZIPINC)
    +    OCI8INCDIR=$OCISDKZIPINC
    +  else
    +    AC_MSG_ERROR([Oracle Instant Client SDK header files not found])
    +  fi
    +
    +  OCISYSLIBLIST=`echo "$OCI8INCDIR" | sed -e 's!\(.*\)/include$!\1/demo/sysliblist!'`
    +  if test -f "$OCISYSLIBLIST"; then
    +    PHP_EVAL_LIBLINE(`cat $OCISYSLIBLIST`, OCI8_SYSLIB)
    +  fi
    +
    +  AC_OCI8IC_VERSION($PHP_OCI8_INSTANT_CLIENT)
    +  case $OCI8_VERSION in
    +    10.1)
    +      PHP_ADD_LIBRARY(clntsh, 1, OCI8_SHARED_LIBADD)
    +      PHP_ADD_LIBPATH($PHP_OCI8_INSTANT_CLIENT, OCI8_SHARED_LIBADD)
    +      ;;
    +
    +    *)
    +      AC_MSG_ERROR([Unsupported Oracle Instant Client version])
    +      ;;
    +  esac
    +
    +  AC_DEFINE(HAVE_OCI8_ATTR_STATEMENT,1,[ ])
    +  AC_DEFINE(HAVE_OCI_9_2,1,[ ])
    +  AC_DEFINE(HAVE_OCI8_TEMP_LOB,1,[ ])
    +  AC_DEFINE(PHP_OCI8_HAVE_COLLECTIONS,1,[ ])
    +  AC_DEFINE(HAVE_OCI_INSTANT_CLIENT,1,[ ])
    +
    +  PHP_NEW_EXTENSION(oci8, oci8.c, $ext_shared)
    +  AC_DEFINE(HAVE_OCI8,1,[ ])
    +
    +  PHP_SUBST_OLD(OCI8_SHARED_LIBADD)
    +  PHP_SUBST_OLD(OCI8_DIR)
    +  PHP_SUBST_OLD(OCI8_VERSION)
    +
    fi

    I've just installed the 10.1.0.3 instant client basic and sdk and php-4.3.9 on a Mandrake 10 Linux system
    However I can`t patch the config.m4 file.
    patch -p0 config.m4 php_oci8ic_buildpatch
    patching file config.m4
    Hunk #1 FAILED at 38.
    Hunk #2 FAILED at 146.
    Hunk #3 FAILED at 179.
    3 out of 3 hunks FAILED -- saving rejects to file config.m4.rej
    config.m4.rej says:
    *** 38,53 ****
    OCI8_VERSION=8.1
    fi
    else
    - AC_MSG_ERROR(Oracle-OCI8 needed libraries not found)
    fi
    AC_MSG_RESULT($OCI8_VERSION)
    - PHP_ARG_WITH(oci8, for Oracle-OCI8 support,
    - [  --with-oci8[=DIR] Include Oracle-oci8 support. Default DIR is ORACLE_HOME.])
    if test "$PHP_OCI8" != "no"; then
    - AC_MSG_CHECKING([Oracle Install-Dir])
    if test "$PHP_OCI8" = "yes"; then
    OCI8_DIR=$ORACLE_HOME
    else
    --- 38,83 ----
    OCI8_VERSION=8.1
    fi
    else
    + AC_MSG_ERROR([Oracle (OCI8) required libraries not found])
    fi
    AC_MSG_RESULT($OCI8_VERSION)
    + AC_DEFUN(AC_OCI8IC_VERSION,[
    + AC_MSG_CHECKING([Oracle Instant Client version])
    + if test -f $PHP_OCI8_INSTANT_CLIENT/libociei.$SHLIB_SUFFIX_NAME; then
    + if test -f $PHP_OCI8_INSTANT_CLIENT/libclntsh.$SHLIB_SUFFIX_NAME.10.1; then
    + if test ! -f $PHP_OCI8_INSTANT_CLIENT/libclntsh.$SHLIB_SUFFIX_NAME; then
    + AC_MSG_ERROR([Link from $PHP_OCI8_INSTANT_CLIENT/libclntsh.$SHLIB_SUFFIX_NAME to libclntsh.$SHLIB_SUFFIX_NAME.10.1 not found])
    + fi
    + OCI8_VERSION=10.1
    + else
    + AC_MSG_ERROR([Oracle Instant Client library version not supported])
    + fi
    + else
    + AC_MSG_ERROR([Oracle Instant Client libraries not found])
    + fi
    + AC_MSG_RESULT([$OCI8_VERSION])
    + ])
    +
    + PHP_ARG_WITH(oci8, for Oracle (OCI8) support using ORACLE_HOME installation,
    + [  --with-oci8[[=DIR]] Include Oracle (OCI8) support using an ORACLE_HOME
    + install. The default DIR is ORACLE_HOME])
    +
    + PHP_ARG_WITH(oci8-instant-client, for Oracle (OCI8) support using Oracle Instant Client,
    + [  --with-oci8-instant-client[[=DIR]] Include Oracle (OCI8) support using
    + Oracle Instant Client. DIR is the directory with the
    + Instant Client libraries. On Linux it will default to
    + /usr/lib/oracle/<most_recent_version>/client/lib
    + Other platforms will need to have it explicitly specified.])
    if test "$PHP_OCI8" != "no"; then
    +
    + if test "$PHP_OCI8_INSTANT_CLIENT" != "no"; then
    + AC_MSG_ERROR([--with-oci8 and --with-oci8-instant-client are mutually exclusive])
    + fi
    +
    + AC_MSG_CHECKING([Oracle Install Directory])
    if test "$PHP_OCI8" = "yes"; then
    OCI8_DIR=$ORACLE_HOME
    else
    *** 116,129 ****
    -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    10.1)
    PHP_ADD_LIBRARY(clntsh, 1, OCI8_SHARED_LIBADD)
    PHP_ADD_LIBPATH($OCI8_DIR/lib, OCI8_SHARED_LIBADD)
    AC_DEFINE(HAVE_OCI8_ATTR_STATEMENT,1,[ ])
    AC_DEFINE(HAVE_OCI_9_2,1,[ ])
    - AC_MSG_ERROR(Unsupported Oracle version!)
    esac
    --- 146,163 ----
    -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    +
    10.1)
    PHP_ADD_LIBRARY(clntsh, 1, OCI8_SHARED_LIBADD)
    PHP_ADD_LIBPATH($OCI8_DIR/lib, OCI8_SHARED_LIBADD)
    AC_DEFINE(HAVE_OCI8_ATTR_STATEMENT,1,[ ])
    AC_DEFINE(HAVE_OCI_9_2,1,[ ])
    + AC_DEFINE(HAVE_OCI8_TEMP_LOB,1,[ ])
    + AC_DEFINE(PHP_OCI8_HAVE_COLLECTIONS,1,[ ])
    +
    + AC_MSG_ERROR([Unsupported Oracle version])
    esac
    *** 145,154 ****
    -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    PHP_NEW_EXTENSION(oci8, oci8.c, $ext_shared)
    AC_DEFINE(HAVE_OCI8,1,[ ])
    PHP_SUBST_OLD(OCI8_SHARED_LIBADD)
    PHP_SUBST_OLD(OCI8_DIR)
    PHP_SUBST_OLD(OCI8_VERSION)
    fi
    --- 179,266 ----
    -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    + dnl
    + dnl Check if we have collections
    + dnl
    + PHP_CHECK_LIBRARY(clntsh, OCICollAssign,
    + [
    + AC_DEFINE(PHP_OCI8_HAVE_COLLECTIONS,1,[ ])
    + ], [], [
    + -L$OCI8_DIR/lib $OCI8_SHARED_LIBADD
    + ])
    +
    +
    PHP_NEW_EXTENSION(oci8, oci8.c, $ext_shared)
    AC_DEFINE(HAVE_OCI8,1,[ ])
    PHP_SUBST_OLD(OCI8_SHARED_LIBADD)
    PHP_SUBST_OLD(OCI8_DIR)
    PHP_SUBST_OLD(OCI8_VERSION)
    +
    + elif test "$PHP_OCI8_INSTANT_CLIENT" != "no"; then
    +
    + AC_MSG_CHECKING([Oracle Instant Client directory])
    + if test "$PHP_OCI8_INSTANT_CLIENT" = "yes"; then
    + dnl Generally the Instant Client can be anywhere so the user must pass in the
    + dnl directory to the libraries. But on Linux we default to the most recent
    + dnl version in /usr/lib
    + PHP_OCI8_INSTANT_CLIENT=`ls -d /usr/lib/oracle/*/client/lib 2> /dev/null | tail -1`
    + if test -z "$PHP_OCI8_INSTANT_CLIENT"; then
    + AC_MSG_ERROR([Oracle Instant Client directory not found. Try --with-oci8-instant-client=DIR])
    + fi
    + fi
    + AC_MSG_RESULT($PHP_OCI8_INSTANT_CLIENT)
    +
    + OCI8_DIR=$PHP_OCI8_INSTANT_CLIENT
    +
    + AC_MSG_CHECKING([Oracle Instant Client SDK header directory])
    +
    + dnl Header directory for Instant Client SDK RPM install
    + OCISDKRPMINC=`echo "$PHP_OCI8_INSTANT_CLIENT" | sed -e 's!^/usr/lib/oracle/\(.*\)/client/lib[[]]*$!/usr/include/oracle/\1/client!'`
    +
    + dnl Header directory for Instant Client SDK zip file install
    + OCISDKZIPINC=$PHP_OCI8_INSTANT_CLIENT/sdk/include
    +
    + if test -f "$OCISDKRPMINC/oci.h"; then
    + AC_MSG_RESULT($OCISDKRPMINC)
    + PHP_ADD_INCLUDE($OCISDKRPMINC)
    + OCI8INCDIR=$OCISDKRPMINC
    + elif test -f "$OCISDKZIPINC/oci.h"; then
    + AC_MSG_RESULT($OCISDKZIPINC)
    + PHP_ADD_INCLUDE($OCISDKZIPINC)
    + OCI8INCDIR=$OCISDKZIPINC
    + else
    + AC_MSG_ERROR([Oracle Instant Client SDK header files not found])
    + fi
    +
    + OCISYSLIBLIST=`echo "$OCI8INCDIR" | sed -e 's!\(.*\)/include$!\1/demo/sysliblist!'`
    + if test -f "$OCISYSLIBLIST"; then
    + PHP_EVAL_LIBLINE(`cat $OCISYSLIBLIST`, OCI8_SYSLIB)
    + fi
    +
    + AC_OCI8IC_VERSION($PHP_OCI8_INSTANT_CLIENT)
    + case $OCI8_VERSION in
    + 10.1)
    + PHP_ADD_LIBRARY(clntsh, 1, OCI8_SHARED_LIBADD)
    + PHP_ADD_LIBPATH($PHP_OCI8_INSTANT_CLIENT, OCI8_SHARED_LIBADD)
    + ;;
    +
    + *)
    + AC_MSG_ERROR([Unsupported Oracle Instant Client version])
    + ;;
    + esac
    +
    + AC_DEFINE(HAVE_OCI8_ATTR_STATEMENT,1,[ ])
    + AC_DEFINE(HAVE_OCI_9_2,1,[ ])
    + AC_DEFINE(HAVE_OCI8_TEMP_LOB,1,[ ])
    + AC_DEFINE(PHP_OCI8_HAVE_COLLECTIONS,1,[ ])
    + AC_DEFINE(HAVE_OCI_INSTANT_CLIENT,1,[ ])
    +
    + PHP_NEW_EXTENSION(oci8, oci8.c, $ext_shared)
    + AC_DEFINE(HAVE_OCI8,1,[ ])
    +
    + PHP_SUBST_OLD(OCI8_SHARED_LIBADD)
    + PHP_SUBST_OLD(OCI8_DIR)
    + PHP_SUBST_OLD(OCI8_VERSION)
    +
    fi
    How can i patch the config.m4 file??

  • Firefox says my system wont' support new yahoo mail. it was before today. i have two windows 7 machines

    i've been using firefox and and new yahoo mail for a few months on a windows 7 machine. i bought another 7 unit last weekend. as of today both firefox wont let me use new yahoo mail. it says my system wont support firefox for new yahoo mail. it says system requirement is XP, Vista, or windows 7. i have that. 1,7 mz processor and 4 gigs ram. that's plenty i think. must be a glitch somewhere.

    Try downloading from here:  Download Photoshop Elements products | 13, 12, 11, 10
    FYI this is the Photoshop section, Elements questions should be asked here: Photoshop Elements
    Benjamin

  • New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

    New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

    I tested this:
    Reinstalled Aperture 3.1 from the Trial Installer.
    In some way it seems to be working. But the whole thing is a scary Chimera.
    It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
    But the Media Browser does not show the aperture Library that I created.
    The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder.  Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
    The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
    When opening the chimera Aperture, I see plenty of warnings in the Console window:
    An Aperture "Hang" report
    xpcproxy assertion failed
    com.apple.IconServiceAgent: main failed to composite image
    quicklookd: Warning
    and more ... the hang was critical. I had to force quit Aperture more than once.
    So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your  precious photos.

  • New Version of InContext Editing released.

    Hello all,
    A new version of InContext Edting was released today. Please see Cristintel's announcement in the Service Updates forum for detailed information on new features and fixes.
    Best regards,
    Corey

    This might be useful to some people though, didn't know where to put it since it was in a reply to "Feature Requests"
    The latest version of SpryHTMLDataSet.js can be found here:
    http://labs.adobe.com/technologies/spry/includes/SpryHTMLDataSet.js
    http://labs.adobe.com/technologies/spry/includes_minified/SpryHTMLDataSet.js
    http://labs.adobe.com/technologies/spry/includes_packed/SpryHTMLDataSet.js
    It contains the patch above and some other fixes:
    Added new removeUnbalancedRows constructor option to control whether or
    not rows that have fewer/more columns defined than column names
    specified. Default is false. If false, the data set will normalize all
    rows so that they have the same number of columns. Any missing values
    will be set to an empty string.
    Modified the column naming algorithm so that when
    firstRowAsHeaders:true and not enough column names exist, that we
    fallback to the "columnN" naming convention for the missing column
    names.
    Fixed bug that prevented HTMLDataSets, that initially load data from
    the page, from loading remote content. Converted the internal member
    usesExternalFile to a function that dynamically returns a bool based on
    the value of the url property. This was initially only getting set
    during construction time, but now it gets done on the fly.
    Fixed normalizeColumnName() so that it strips leading/trailing spaces
    *after* tags have been stripped. We were doing it in the reverse order
    and stripping tags re-introduced leading/trailing spaces in some cases
    leading to unexpected column names with leading/trailing underscores.
    --== Kin ==--

  • New Oracleasm Libraries not detecting ASM drives consistently

    Has anyone run into problems with the new Oracle ASMLib not detecting ASM drives on load and on scandisks commands? My /etc/sysconfig/oracleasm is the standard defaults that I used with the previous version of ASMLib, i.e. I do not specify the exclude or scanorder.
    I have noticed that if I run scandisk while specifying the LUN in question, then ASMLib will detect the drive properly. I have also noticed that if I run the "scandisks" multiple times (100's), then it will at times find the proper ASM disks. I have played with various settings in the /etc/sysconfig/oracleasm file as well with no luck on getting consistent ASMLib detection.
    The workaround I have for now is to put a "oracleasm scandisks /dev/sd*1" into my /etc/rc.d/rc.local file.
    System is HP BL460c running Red Hat 5.2 with QLogic Driver version 8.01.07.25-fo
    ----------- some screen output -----------------------
    [root@ipht01 ~]# rpm -qa | grep oracleasm
    oracleasm-support-2.1.0-1.el5
    oracleasmlib-2.0.3-1.el5
    oracleasm-2.6.18-92.el5-2.0.5-1.el5
    [root@ipht01 ~]# oracleasm listdisks
    [root@ipht01 ~]# oracleasm querydisk /dev/sdb1
    Device "/dev/sdb1" is marked an ASM disk with the label "WIND_ASMDISK001"
    [root@ipht01 ~]# oracleasm scandisks
    Reloading disk partitions: done
    Cleaning any stale ASM disks...
    Scanning system for ASM disks...
    [root@ipht01 ~]# oracleasm listdisks
    [root@ipht01 ~]# oracleasm querydisk /dev/sdb1
    Device "/dev/sdb1" is marked an ASM disk with the label "WIND_ASMDISK001"
    [root@ipht01 ~]# oracleasm exit
    Unmounting ASMlib driver filesystem: /dev/oracleasm
    Unloading module "oracleasm": oracleasm
    [root@ipht01 ~]# oracleasm init
    Loading module "oracleasm": oracleasm
    Mounting ASMlib driver filesystem: /dev/oracleasm
    [root@ipht01 ~]# oracleasm listdisks
    [root@ipht01 ~]# oracleasm querydisk /dev/sdb1
    Device "/dev/sdb1" is marked an ASM disk with the label "WIND_ASMDISK001"
    [root@ipht01 ~]# oracleasm scandisks /dev/sdb1
    Reloading disk partitions: done
    Cleaning any stale ASM disks...
    Scanning system for ASM disks...
    Instantiating disk "WIND_ASMDISK001"
    [root@ipht01 ~]# oracleasm listdisks
    WIND_ASMDISK001

    Sergio,
    My issue is with the 2.0.5 Version of ASMLib. Previously, I was using oracleasm-2.6.18-92.el5-2.0.4-1.el5.x86_64.rpm. Please see the first section of the screen output for the complete list or Oracleasm installed rpms (latest from OTN). Also, this node was after an immediate OS build with no databases or other activity being done on the node while I attempt to scandisks. I can't imagine that I have drives being repeatedly open/closed.
    I do have the following in my /var/log/oracleasm file, but the running of oracleasm was done by the root user and the permissions on the devices have not really changed between 2.0.5 and the older 2.0.4 that I have been using.
    Loading module "oracleasm": oracleasm
    Mounting ASMlib driver filesystem: /dev/oracleasm
    Reloading disk partitions: done
    Cleaning any stale ASM disks...
    Scanning system for ASM disks...
    oracleasm-read-label: Unable to open device "/dev/sda1": No such file or directory
    oracleasm-read-label: Unable to open device "/dev/sda2": No such file or directory
    oracleasm-read-label: Unable to open device "/dev/sda3": No such file or directory
    oracleasm-read-label: Unable to open device "/dev/sdb1": No such file or directory
    oracleasm-read-label: Unable to open device "/dev/sdc1": No such file or directory
    oracleasm-read-label: Unable to open device "/dev/sdd1": No such file or directory
    [root@ipht02 ~]# ls -l /dev/sd*1
    brw-r----- 1 root disk 8, 1 Nov 17 12:51 /dev/sda1
    brw-r----- 1 root disk 8, 17 Nov 17 14:04 /dev/sdb1
    brw-r----- 1 root disk 8, 33 Nov 17 14:04 /dev/sdc1
    brw-r----- 1 root disk 8, 49 Nov 17 14:04 /dev/sdd1
    Anything I can do to troubleshoot?
    Thanks
    Robert

Maybe you are looking for

  • How do i allow multiple pages to open in one page?

    Hi there, I want to be able to have one page with a left navigation where the viewer can click on the nav and get page content opening up on the right.  With each click of a new button on the nav, the content changes.  Like the apple site : http://ww

  • Challenging:How can I COMBINE two CWIMAQPoints Collection in one - URGENT

    I have two CWIMAQPoints collections and I want to combine them in one CWIMAQPoints in order to pass it as an argument to another function. In order to do this I would like to avoid using a loop in where I would add each item one-by-one. I would appre

  • How to print text in English & chinese lang in the same window in smartform

    Hi All, My requirement is in the Smartform for few windows i need the text in the English Language as well as corresponding Text in chinese Language. For Eg                               Buyer:                                                         

  • Items of invoice include services from previous invoice of a current case..

    Hi colleagues, I have one problem, I've never faced with that one before.  I have a case and one invoice for the case, for example later I want to add 2 new services and create a new one invoice for these two services - in this case a system creates

  • Sender RFC scenario not working

    Hi All, I'm trying to configure a scenario where the sender is an RFC. I have done the following configuration steps: 1. Created an RFC destination in the R/3 system.    Program ID: SAPSLDAPI_X3A    Gateway Host: hostname of the XI system    Gateway