Headset connection to HP PAVILION 15-E003

Hi! 
I have an HP PAVILION 15-E003 and this computer just have one headset connection. In the description says that this connection can run Áudio and Microphone at the same time but i can't... I just can connect headset sound and not the microphone. How can i use both in just one connection?
Thanks.

HP have used a combined Mic-in & Headphone-out socket on their Laptops and Netbooks for many years now.
See the discussion here http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HP-Mini-210-Netbook-Headset-Audio-Combi-Soc...
... and the adapter cable available from eBay for 99p linky'ed on the fourth page of thar thread.

Similar Messages

  • Headset connection to HP Pavilion laptop

    I have recently purchased an HP Pavilion laptop. Product name: HP Pavilion 15 Notebook PC, Product number: E3A54PA#ABG.  I am trying to connect my headset which has two 3.5mm plugs - pink for microphone and green for earphones.
    Problem is the laptop only has one 3.5mm socket. I've looked at other headsets for sale and they all have 2 plugs.
    How do I connect a headset?

    Same here! This is so strange... Help please.

  • How to connect my HP Pavilion g6 to my TV?

    Hello,
    I would like to connect my HP Pavilion g6 to my TV? Do I need a cable HDMI (is that mean HDMI 1.4 or different  model) or some other cable?
    Thanks in advance
    This question was solved.
    View Solution.

    Hi,
    The following link shows its specs:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03510781
    Any HDMI 1.2 (and above) cable will work.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Audio fade-in when headset connected

    When I have my headset connected and play a song, it fades in whenever I play a song. That is very annoying, how do I turn that off? Also, why did RIM put that annoying feature there in the first place? I have the curve 8530 with OS version 5.

    If this is the case Then there must be some switch somewhere in the bowels of the project data that can be thrown. Once again i am appalled at how little information is available to power users and apple should be ashamed of it self. THese damned programs do not work as advertised when pushed and they display anomalies that keep the forums full but nothing else. I had this problem and had to export the whole movie as is and then reimport it in order to over come the INVERSE DUCKING feature so prominently in fashion these days. I will be trying now to see how this works ... again.
    PS none of my issues with inverse ducking matched what you did to solve yours -- My project had been completed and now someone wanted tweaks so when i went in to make the tweaks- that is what i found . Sort of like magical apperance of unnamed temporary files amongst other things.

  • I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

    - Try insering and removing the headphone plug a dozen times or so.
    - Try cleaning out the headphone jack in the iPod.
    - Resett he iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restoe to factory defaults/new iPod
    If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
    If not underwarranty Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following is less expensive. Here is one. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Nokia Bluetooth Stereo Headset connect to PC

    Hi,
    has anyone tried using Nokia bluetooth stereo headset connect to PC?
    if yes, which models is working fine....
    works for VOIP as well?

    I don't think they are according to Nokia web page.
    Lumia 1020, N9, 808 PureView, Windows 7 Pro 64bit
    Vote NO to Nokia - MS -deal.

  • Speakers Altec Lansing VS-3151 Connecting to HP Pavilion a1130n

    I've successfully been using the Altec Lansing Speaker System VS-3151 that I purchased together with my HP Pavilion a650y in 2004. When we recently replaced our desktop, my daughter wanted to inherit the speaker system to use with her HP Pavilion a1130n that was purchased in 2005.  However, we can't determine how to connect those speakers to her desktop. Perhaps there is some kind of converter that we need?

    Ok so how did you do it?

  • My bluetooth headset connects, but it is not a source option on an active call. Why?

    I get an icon indicating that the plantronics M1100 headset is connected and working properly on my display. The headset even asks me if i want to answer incoming calls. But when i say "answer", i can only use the handset or speaker phone. I cannot get an active call to go to my headset. This just started happening. If there is a setting i am missing in the iPhone 4s please let me know. thanks!

    I am suddenly having a similar issue with my Motorola H17 bluetooth headset.  it is pairing/connected with my iphone 4.  i can use the voice control feature to dial a number.  but i cannot get any audio and cant answer calls from the headset.

  • Headset connection problems

    My N73 Music Edition has of late been behaving strangely. When I connect my headset, I hear no sound. If I give the pop port connection a little jerk, it works fine. A small shake and the sound goes off, though the headset icon is displayed. Help!

    I have same issue on my previous N73 ME.  I believe that the headset/USB connection port is easily gets loose and the pins of USB/Headset cable is does not fit the ones on the port.  This issue could also be due to broken pins of the USB/headset cable so try using other cable.  When this happens, i'll wiggle the cable on the port and push it firmly.  Sometimes when wiggling the cable slight downward will gave you a connection but not until the cord gets moved.   I believe it a manufacturing issue on N73. 
    Nokia 5530 Xpress Music
    v11.0.054
    "How We Respond Is Who We Are..."

  • Jabra BT620s Bluetooth headset connects then dis connects

    My BT620 Bluetooth headset pairs with my iPad but when I connect the iPad drops the connection after 5 or 10 seconds. The bt620s work great with my other Bluetooth devices and supports the ad2p stacks.
    Any suggestions or ideas on how to get these to work?

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.

  • E75 Bluetooth Headset Connectivity

    Hi Guys I cannot connect any of my bluetooth headsets to my E75.
    When I start pairing, my phone does find the headset and can pair. Then when I ask to connect to headset, I keep getting the message "unable to create bluetooth connection".
    But the bluetooth on my phone works because it is connecting to my mac.
    I've tried this with a motorola, nokia and jawbone headset. They all have the same problem. There's nothing wrong with the headsets because they connect just fine to my old E71.
    I've sent the phone thrice to the Nokia service centre and they reinstalling all the software and sending it back. 
    Please help 

    I think i may have found a solution for this:
    having the same problems, regarding bluetooth connection problems, and sometimes the %u [74] error.
    after hard reseting my fone more times than i can remember, and restoring certain parts of the info, i find messages and contacts, changing a lot of the settings etc dont have an effect. only when you restore calendar it creates problems.
    i have ruled out viruses etc, cuz no mem card was left in, and i was only restoring text at a time. not files..
    my next theory to test this is:
    i will sync to a server like google or ovi, wipe it, then resync from the server, and see if its any data corruption being restored from pc suite is the problem..
    but no time now so a joo to do.
    my e75 is starting to get on my nerves and i think it will be a shame but nessarsary to get another model cuz this one clearly is not finished. [mail for exchange, bluetooth problems, batt life, annoying non-standardised menus+shortcuts etc etc]

  • Loudspeaker automatically turn on even after headset connect, also unable to turn it off

    I am using the i phone 4s, my phone automatically turn on loudspeaker on even after my headset is connected, also sometime my sound not audible to others.

    I am using the i phone 4s, my phone automatically turn on loudspeaker on even after my headset is connected, also sometime my sound not audible to others.

  • No audio from headset connected to ipad mini

    I connect me apple headset to my ipad mini but the audio does ot switch to the headset, it continues playing via the speakers on the mini. How do I get it to switch to the headset
    Thanks
    Gbemi

    Make sure you push it all the way in.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/e6edb2b15cb9b3456f 6d446386421777.jpg

  • Connecting firewire to Pavilion P6-2302

    I want to use Windows MovieMaker, importing video from my Canon MiniDV camcorder tapes.
    As a newbie to all this, and after hours of confusing research online, please can anyone answer these questions:
    1. I understand I should transfer via firewire. Do I need to install anything extra on my PC (HP Pavilion P6-2302)? If not, where do I connect the firewire cable to the PC?
    2.  My CD/DVD tray says it is a DVD Multirecorder.  Does that mean I can burn DVDs from MovieMaker?
    I will be very grateful for any advice. Thanks.
    This question was solved.
    View Solution.

    Understood, many thanks, Terminator.
    There are many opinions online that 'firewire to USB' adapters often prove unsatisfactory, so I will go for the card option.
    Now to find someone to install it!
    Thanks for your advice, which is greatly appreciated.

  • Itunes launches when bluetooth headset connects on OS X

    OS X: when I connect a Bluetooth headset, iTunes launches and begins playing. Not desired behavior. I see a thread or two from a year or so ago, but wonder if this isn't caused by some recent update. (It didn't do this a month ago).

    Found the answer thanks to another post on the Apple Forums. The iTunesHelper app in Login Items was an older location of an older iTunes which was somehow not replaced.
    Replacing it was not entirely easy. I could remove it easily enough, but because the current iTunesHelper.app lives inside the iTunes.app bundle, you cannot navigate from System Preferences - Users&Groups - Login Items as it won't open iTunes.app to look for other apps inside.
    So, I opened Terminal.app and typed
    open /Applications/iTunes.app/Contents/MacOS
    this opens a Finder window. Here you find the correct iTunesHelper.app. That one can be dragged to the login items in System Preferences.

Maybe you are looking for

  • Problem with second instance of access manager

    Well, after sorting out things with the first install of access manager, I went on to install a second instance on a different host (it's required for delegated admin..) Here are the options I used on install: Access Manager: Administration (1 of 6)

  • Dual monitor possible on G3 Beige 300?

    I would like to be able to use a dual monitor set up, one for all my menus, and the other for workspace in each program. I am running OS 9.2 now but will be upgrading to OS X shortly after the holidays. Is this possible? What kind of hardware/softwar

  • Bug getting handle to 'setLogLevel' in Connector

    This is version 7 of S1AS. There appears to be a bug at IASMCFFactory.java:346. At this line, the class is trying to get a handle to the method 'setLogLevel' of the managed-connection-factory; as specified in the j2ee connector specification ra.xml f

  • Install LabVIEW 32-bit and 64-bit on same computer - doesn't seem to work

    I have the LabVIEW 2011 Development System.  The FAQ at http://digital.ni.com/public.nsf/websearch/71E9408E6DEAD76C8625760B006B6F98?opendocument&Submitted&&...  says that the 32-bit version and 64-bit version can be installed on the same machine.  I

  • Filter Simple List to show only 1 record per employee

    All, I'm looking for a very simple OOTB way to filer a list. I've used InfoPath form to create a simple test form which is published to form library on submission. My list columns are: Employee Name, Pass/Fail,Test Score, Test Attempt (Count). The li