Headset; end call

How does one end a call when using a headset. I recently made a call with the headset plugged in (I'm NOT talking about a Bluetooth--just a regular headset). I dialed then closed the lid. Everything worked okay until it was time to hang up. I opened the lid and clcked "end". The call continued. I opened the llid and closed it again figuring ending a call would be the same as a regular call. Nope. I opened ther phone and once more clicked "End". It finally ended.
I know this has to be something simple; but it is not described in the owners guide.

Hold down(1-2 seconds) the answer/hangup button on the head set, just like you would to answer a call.

Similar Messages

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums.

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums. Thank You

Same issue on my wife's iPhone 4S. I suspect it is related to the recent 6.1.2 iOS update (Note: I have a 3S and the update did not cause any issues).
I've tested both bottom and top mics on the 4S using video recorder and both mics work fine. Speakerphone and headset during calls also work fine. The issue is only related to the bottom mic while making calls. I can hear the caller but the caller cannot hear me. If I hold the mic very close to my mouth, the caller can hear a very low level signal.
The problem appears to be software related, not hardware.

Iphone screen is black when I remove the phone from my ear; can't end call

This is annoying! It doesn't happen all the time -- only some of the time but at least two times a day. The phone works but it just doesn't show the "end call" option -- or anything for that matter. I can turn it off when I have my headset on but if I don't have the headset on, I have to press the lock key on the top of the phone to get it to do anything. Then it locks, and then when I touch the on button at the bottom of the phone, it shows the display again. Anyone have any ideas or should I take it in?

Hey jps42247,
Do you have a protective case on the iPhone? If its covering the Proximity sensor on the iPhone, the iPhone could think the phone is still being held up to your head. In that case the iPhone screen would remain locked so the call could not be ended accidentally.
If you don't have a case on the iPhone, try resetting or restoring the iPhone.
http://docs.info.apple.com/article.html?artnum=305743
http://docs.info.apple.com/article.html?artnum=305744
Jason

Cannot End Call on Q10 after upgrading to OS 10.2

I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx

marootz wrote:
I cannot End Call (mostly Outgoing) after upgrading to OS 10.2. The receivers phone keeps ringing even after i try to disconnect the call. The "END CALL" option is grayed out and the red led on the top left keeps blinking. This happens very frequently (mostly Outgoing calls). Any thoughts or solutions Thx
From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When in phone mode black screen and no option to "end call" power dwn req

ok so heres my problem after i updated to 4.0.2 now when i use the "phone" to make recieve call screen goes blank and i loose the option to "end call" then to get outta call i have to press power button and home button to reset i hav already went to itunes and rebooted my phone hoping that would fix it but nope its still jacked up anyone can help?? any ideas

in phone mode, I face the same problem. I call and then I have to enter a series of numbers to make an international call, but the screen goes blank completely
This is little bit weird. I am using iphone 3gs; works with other functions, but for the phone. The phone becomes completely useless after I make any call.
Good that it is still in the 30 day trial period; plan to return it.

IPhone not hanging up on "End Call"

This occurs frequently, about 1 out of every 5 calls I make. When I hit the red "End Call," at the conclusion of a conversation, my phone hangs with it reading, "call ending..." It does not ever read the normal "call ended" and will stay that way until the screen dims. I then have to reboot the iPhone and everything works normally on the iPhone until it happens again within a few phone calls.
I am running 1.1.1 (3A109a) and have done nothing peculiar to the iphone. (No 3rd-party apps or jailbreak.)
Just wondering if anyone else is experiencing this…thanks.
Message was edited by: JKosh

First thing that you should do is update to 1.1.2. Apple fixed many bugs like that in that patch. Normally its something to do with the call line itself, like if you're phoning a Verizon person or a T-moble machine.
Do you end the call or does the other person end the call? Try having the other person end the call and see what happens. Also, ask who their provider is and if that doesn't help call AT&T and see what they say.

Iphone 5 doesn't end call and Siri problems. Need help.

I can barely open my screen before it closes and when I hit end call--it doesn't. The screen kicks off and goes black--anyone else experiencing this?
Plus, Siri is acting up and doesn't get the question and the screen goes blank quickly.
I was switched out for a new phone after all the other issues relating to lack of signal and battery drainage. So, I now have a new phone with a complete new install and now this. I have rebooted to the apple screen--nothing seems to be working to solve this.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help make an appointment at an App,e Store to have your iPhone looked at by a service technician.

Ios5.0.1, can't receive calls, can't end call, can't take video!!!!!

After installed ios5.0.1, can't receive calls, can't end call, can't take video!! The screen become frozen! Any help please? Thx!

How about going to a corporate store and see if they will let you put your SIM card in a display model. Your number will transfer over with the SIM card. Then if you call your number from your wife's phone or one of store landline phones and the call goes through, you have ruled out the SIM card being the problem.
You don't have the phone number set to automatically forward to the voicemail, do you?

E61i - can't end call

I have an E61i and nothing happens when I press the end call button now. I can't hang up on calls anymore without going to the options menu.
I have the latest version of the firmware. I have a memory card but I removed it and restarted with no effect. I used to be able to just turn my phone off and on and the problem would go away. Now it won't go away.
Any suggestions

If your phone warranty is still valid - get it repaired. But I suppose this is not the case... So the only thing I can think of is Hard Reset - dial *#7370# and confirm. But be aware that this will format the device - all data on the phone memory including all applications will be erased.

RE CAN'T END CALL IN LUMIA 800

i can't end call in lumia 800 and battery is also not getting full charged ..........pls help

@himanshuonly4u
Whilst the latter issue is addressed in soon to be released 1600.2483.8107.11501 the former has only so far produced the response "reset" your device or renew SIM which seems rather fallacious, as Lumia 800 one of the first devices bar iPhone to utilise microSIM and neither of which seem to address this issue if your device is so affected.
Happy to have helped forum with a Support Ratio = 42.5

Can't end call on iPhone

At the end of a call my iPhone screen is dark and doesn't always pop back to the call screen so I can hit End Call. Therefore, the call continues on until it disconnects. How do I get back to that screen short of never putting the thing to sleep? Could my Marware glove cover have something to do with this?

Your case is very likely blocking the proximity sensor. Remove the case and see if the problem goes away.

FaceTime not able to end calls

when using face time I can video call with good quality but when unable to end call or change camera the touch screen is frozen
the other person has to end the call
using a 16gb iPad air with 8.1.3

Most likely it's a bug in their system. However you may wish to report this to them if you are Apple Developer like I am! Hope this helps!

Standby prevents ending call

Hair trigger standby makes it difficult to end call. When I try to end a phone call, my iPhone goes into standby so quickly that I cannot end the call. I have to bring it out of standby to end the call and often it goes back into standby so quickly that it again prevents me from ending call. Sometimes I have to bring it out of standby repeatedly to finally end the call. Is this a bug in the new iOS for iPhone?

That was I thought first too, but remeber that no any 3rd app was running. Moreover at the first time the phone was totally "virign".
Really my porblem is not that the phone app hangs. My problem is that I do not find any function / tool to kill / re-start that task. I must re-start the phone and takes time.
As I have posted earlier I feel myself beta tester of this phone, what is not so big problem becasue I love it much, but at least I should have some tools to pass somehow the stupid problems.

End Call not responsive

When I start to make a call, pressing the END Call is not responsive and the recipient receive a missed call. It takes 3 seconds to respond.

Hi and Welcome to the Community!
Can you clarify please...why would you be using the "End Call" when you "start to make a call"?
In any event...anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Also please check your BB10 OS level:
Article ID: KB23393 How to check the model number and version of the operating system on a BlackBerry smartphone
If you are on anything prior to 10.2.1.3247, then it is strongly advised that you update to that level ASAP. Sachesi is a very good method to do so:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My end call button has suddenly stopped working

I am using an iPhone 4 16GB Factory Unlocked.
My end call button has suddenly stopped working. The icons at the bottom of the screen are also accessed randomly.
i have tried everything recomended.
Updated to the iOS to the latest version 4.3.5. Did a complete reset of the set. rebooted the set several times. But so far nothing seems to work.
Any help would be highly appreciated.

The Basic Troubleshooting Steps are...
Restart... Reset... Restore from Backup... Restore as New...
If you have tried all these and are still having problems, make an appointment at your nearest Apple Store.
http://www.apple.com/support/iphone/basics/
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Headset; end call

Similar Messages

Maybe you are looking for