Headset - feedback and wave for others heara

i use a headset for audio communication over my pc. But everyone i talk with can also hear my music - or other wave stuff - and his own voice.
This is weird, because i already set the mic as the recording source and even if i mute my headset over the volume control at the cable, this still happens. So, this is no speaker-to-mic feedback.
I can only turn this off by either muting the wave over the mixer or disconnecting the headset's loutspeaker cable.
please help me! This is really disturbing and i dont know what to do.

As an additional information i want to say, that it sounds like, there's some wave - or midi, if played - mixed into the mic's sound.

Similar Messages

  • HT201250 Can I include external drives to be backed up using Time Machine.  Not only do I want to back up my IMac, but I have several extenal drives for one iPhoto, one iTunes and one for other files & documents.

    Can I include external drives to be backed up using Time Machine?  Not only do I want to back up my IMac, but I have several extenal drives for one iPhoto, one iTunes and one for other files & documents.  How do I know if they are included in the backup process?

    Yes, if they are not exclude then TM backs them up.
    Allan

  • Can I make firefox defualt for some web shortcuts and IE for others?

    I need to make firefox defualt for some web shortcuts and IE for others.

    # Type ''about:config'' into the location bar and press enter
    # Accept the warning message, this brigs up a list of preferences
    # In the filter box type ''check''
    # Double-click on the preference browser.cache.check_doc_frequency and change its value to 1
    For more details on this preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency

  • My wifi constantly switches between on and looking for other networks

    while I am on my wifi network and internet successfully I notice that it switches between saying WIFI ON and LOOKING FOR OTHER NETWORKS. How do I get it to stop looking for other networks because it is successfully already connected to the right one?

    Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
    PHY Mode
    Channel
    Security
    Signal/Noise or RSSI
    Transmit Rate
    Please do not post the BSSID, as that information is private.
    Now hold down the option key again and select
     ▹ System Information... ▹ Network ▹ Wi-Fi
    Compare the two-letter Country Code with the ISO code for your country. Does it match? The code X0 means that the country couldn't be determined. The code X3 means South America, not otherwise specified.

  • Cash Discount Calculated for One Line Item and not for Other

    Hi All,
    We have devloped a Z program which is used to Write of InterCompany AR and AP recon Account to another GL Account. In this program to clear line item we have created a BDC which calls t-code FB05. Thsi program is running perfectly fine for all company codes.
    There is new company code SG20 for which it is not clearing the line items. It has created a Session in SM35, when we analysed the seesin we found that for some line items system is calculating Cash Discount and for some other line items it is not but the payment Term is same for all the douments with 3% 14days.
    I need your help in understanding that why for some line items system calculates the Cash Discout where as for others it is not calculation..also the Posting Date is same for all the documents.
    Please advise what could be the reson for this.
    Thanks!
    Regards,
    VIvek Srivastava

    Hi
    Cash discount is calculated based on the combination of baseline date and payment term conditions.
    Hence please check the baseline date for all the documents, in which the cash discount is not appearing.
    In your case, the possible reasons could be that 1) baseline date is different between these documents or 2) payment terms cash % is manually modified in the line item of the documents.
    Regards

  • Dunning form F150- Telefon/fax/mail printing for 1 user and not for other

    Hello expert,
    This is regarding the printing of the dunning form using F150. 
    At first, using company code and account clerk (BUSAB), we retrieve the user id.  The program uses FM BAPI_USER_GET_DETAIL to get the address details of this user id.  The user name, telephone and fax adn email are printed in the dunning form (1st reminder, 2nd reminder and so on).  The problem here is , the address details are printed on the form for one user and not for the other user who is processing.  Any idea regarding this.  Do I need to give any user setting parameter in SU01 or is there any authoriztaion issue which is blocking this.  Awaiting reply,
    Cheers,
    Bala

    I'm having the same problem with Exchange 2003, I can get it to work with Entourage and on my iPhone, but it keeps rejecting my password on Mail.app. If I keep entering the password it starts to update with server, but it won't save the password. IMAP is on for my account which is how it works on iPhone.
    I'm starting to think it has something to do with Keychain Access or Mail.app and not so much Exchange Server. If anyone has found a solution please let me know,
    Thanks

  • Answer and Title for 'Other' field in a single choice field is not shown

    The answer for 'Other' in a single choice field is not shown in email answer and 'Other' title not shown in FormsCentral answer.
    I can send examples if that helps.

    Hi Cathy-1961,
    Thanks for using FormsCentral.
    We are looking into the issues that you reported.  I'll let you know when we address the issues.
    Kind Regards,
    Perry

  • Does anyone from Adobe offer feedback and support for this product?

    I'm a teacher at an elementary school and run our morning news show. Currently we're using rather old hardware to run the show through closed-circuit, but are in the process of getting what we need to run a software solution instead. When I watched the video for VC3, I liked what I saw. It was a major part of why we decided to go with a software solution. It seemed to have all the right pieces for what we need to do.
    However, the more I read about it on this forum and around the net, it seems that support and instruction for this product is non-existent, and that the product itself can be buggy at times. This has me quite concerned. It looks like this program is a few years old now, and I can't find any recent updates or news about it. Before I make the purchase, is this a program that Adobe even supports anymore? Is there anyone here at Adobe or elsewhere in the know that can/will provide guidance and troubleshooting if needed?
    If not, does anyone here have any other products that they have experience with that might provide a better alternative? We're still looking to run this as a live show through a closed-circuit, although we could prerecord the show and stream it if necessary, but the turnaround time would need to be quick.
    Any thoughts?

    There is an entire community of Visual Communicator users at http://TeachMeVC.com where you can browse topics and ask questions if you become a member (free).
    Nobody bothers to monitor the forums on the Adobe site for this product so we encourage you to join us at TeachMeVC.com and subscribe to stay in the loop.  You will find users that span from the education, business, government and personal users of Adobe Visual Communicator.
    Also consider my training DVD series and equipment recommendations that have been used by thousands of VC users over the years.  There is NO competing product that gives you live greenscreen capability, teleprompter, easy workflow, wizards, and a ton of included media content.  At this point in time, Adobe Visual Communicator is a unique product in it's class!  The next comparable option is to spend $8,000 to $10,000 on a NewTek Tricaster that has a huge learning curve.

  • WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA

    I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
    Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
    Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
    If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting...  If we need a certain apps (FREE APPS) available only for US based users.
    If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then.....  I want to return all this **** stuffs

    iTunes for Different Countries
    iTunes Store: Which types of items can I buy in my country?

  • AE - Can we setup a system to only approve some roles and not for others ?

    I would like to setup a test system with no approval of roles access except for some of them ?  Will that be possible and how ?
    Any suggestion ?
    I would appreciate any feedback.
    Thanks.

    Hello Frank,
    Thanks for the information and nice suggestion. This infact is a limitation. We can use this only in case our request has other roles, which have Role owners.
    Dear Patrick,
    Now you may use any of the options mentioned as per what kind of access requests comes in your organization but better to use the one which Frank suggested as this would hold true in all teh cases.
    Regards,
    Hersh.

  • CVP Language change (English and option for other Language)

    Hi,
         Currently in our IP IVR we give our callers the option to switch to spanish.  I want to do the same in CVP but I'm not sure how.
    I guess I could create an English page and a Spanish page so that if the callers enter the option for Spanish it would "move" the call to the Spanish page in which all prompts are Spanish.
    Currently, using IP IVR,  our English and Spanish prompts are name the same so we can just send the call back to the beginning and change the Language.
    Any ideas are appreciated.
    thanks

    I see three methods:
    1. Set the default audio path to something like: http:// address>/
    Create a session variable say Lang - Intial value "en-us"
    Prompt for Spanish. If they want that, reset Lang="es-es"
    All prompts in the application would be set as {Session.data.Lang}/app/my_application/foobar.wav
    2. In CVP7 you can start off with Default Audio Path = http:// address>/en-us/my_application/ and use the Application Modifier node to reset the default audio path for Spanish. All prompts would be a WAV file name like foobar.wav
    3. make the language selection a microapp - I always use microapps for such simple things - and pass the language in as a session variable which then flows through to the VXML application.
    I think what is holding you back is that you did not realize that what goes into an audio element as the WAV file can be a complete URL, or part of a URL that is appended to the Default Audio Path, and you can include Session Variables in this. There is a lot of flexibility here.
    Regards,
    Geoff

  • How to restrict editing of some paragraphs and allow for others in same document?

    I have a client that wants to put together standard proposals that have boiler plate information (long paragraphs and some imagery) that will not change. In the same document they have other information that is to be customized by sales teams (text and images). Sometimes, they will have a sentence or a phrase which needs changing in the middle of a long paragraph but the rest of it remains the same. Since these documents are shared and edited by multiple parties, they would like to restrict some paragraphs from editing while making other areas editable, perhaps on the same page of the document. Is there a way to do this in Acrobat Pro XI?

    Thanks for that, yes I’ve been creating pdfs in InDesign for better layout results. We want to generate a template that our international sales team can use for templates, sharing over a server, and trying to prevent them from ruining text flow, image flow etc. just wondering where my limitations are at.\
    Thanks for your help. Anymore suggestions are very welcome.

  • Imessage for some contacts and sms for others

    My wife just bought a 4S, my (grown, married) daughter has a 3GS upgraded to iOS 5.  My wife would like to send text messages to my daughter but my daughter does not have SMS on her phone plan, so messages cost $0.25 each.  The question is how can my wife use iMessage to send messages to my daughter so that they are only received when my daughter is on wifi (without incurring SMS charges), but also allow my wife to send SMS messages to all her other friends.
    I've read that there is an option to turn off SMS/MMS.  This will let my wife iMessage my daughter, but would block her from texting her other contacts.  Instead of having my wife turn this on and off several times a day, I am looking for something simple that will allow this work a

    Since daughter can receive SMS messages (but prefers not to), and wife can send SMS messages to non-iphone holders, how to prevent wife from accidentaly sending an SMS to daughter?
    Already answered.
    She needs to go into Settings, Messages and turn off "Send As SMS". That way if the recipient is someone that can receive iMessage and it isn't available it will not send it as an SMS. That is the purpose of this setting. It only impacts those you iMessage with. With this setting off you can still send SMS to those individuals you normally send SMS to.

  • Dimension works for one and but for others

    I have a situation in which all dimensions-- D1,D2,D3,D4,D5,D6 are joined to a Fact--F1. (both in physical and BMM)
    all the dimension hierarchies are added in Fact content mapping...
    In my report, I use columns from D1...D5 and F1....it works great....but it doesnt work when I add D6. I tried to get through this...and found that it doesnt work only if columns from D3 & D6 are used in the report. If either of the columns are removed it works fine..
    I get this error...
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    *State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: Dim - Product.Product Number. Please fix the metadata consistency warnings. (HY000)*
    Hope you understood my situation. If not, please let me know I can explain it better. :)
    Please help

    Hi,
    Can you please let me know, if you have created the hierarchies for all the dim3 and dim6 dimensions? In case, not can you please create hierarchies for these dimensions and update the fact table sources accordingly so that the BI Server can understand better the grain of the fact and able to generate the query?
    Hope this helps.
    Thank you,
    Dhar

  • I want to give enable a button for a user and disable for others in tcode

    Hi all ,
    I want to give authorisation based on user for TCODE : CCO02 where i enter Production Order.
    After clicking enter button in the next screen for the Total order quantity Icon i want to assign Authorisation to enable to one user and to set in disable mode to other users.
    Pls kindly give suggestions.
    Thanks

    Hi,
    Is it a standard icon or customized? If its a standard icon your basis administrator can enable or disable the icon by giving proper authorization.
    Regards,
    Raj

Maybe you are looking for