Headset (HS-23) connection with device (Nokia 6233...

Hi
From last couple of weeks my headset (HS-23) is not properly connecting with my device (Nokia 6233). Sometimes device shows headset icon but there is no sound in the headset at all. Sometimes sound came from only one of the ear piece, sometimesa sound comes from both of the ear piece but with a different volume level among them. It can be fixed for some of the time by just pushing/pulling the connection with device but not always. Also if this is fixed like this, this type of fix does not persist for long time e.g. problem again came in if the connection point is again moved/pushed/pulled by mistake.
Please help me what to do because of this mess its annyoing and disturbing the music listening experience.

Just clean the pop-port on your phone and the contacts on the headset.
Use a cotton tip with a few drops of isopropyl alcohol on it but be careful not to bend the contacts on the headset.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

Problem with openInputStream (nokia 6233)

Hi,
I am a beginner in J2ME.
I try to make a connection on my nokia 6233 but the connection failed on openInputStream() with Exception.
I use the following code:
=================================================
String url = "http://www.javacourses.com/hello.txt";
InputStream is = null;
HttpConnection hc = null;
try {
hc = (HttpConnection)Connector.open(url);
is = hc.openInputStream();
catch (IOException e) {
=================================================
the connection with hc = (HttpConnection)Connector.open(url) is OK
the hc.openInputStream() is KO
Thanks in advance.

micotn
Welcome to the forum. Please don't post in old threads that are long dead. When you have a question, please start a topic of your own. Feel free to provide a link to an old thread if relevant.
I'm locking this thread now.
db

I have iphone 6 plus and not able to connect with my Nokia bluetooth device

not able to connect with bluetooth devices

iPhone only does limited forms of bluetooth connections, such as with speakers.
You cannot transfer files from an iPhone to a Nokia phone using bluetooth.
What type of Nokia device are trying to connect with? Is the Nokia in pairing mode?
What exactly are you attempting to do?

Pc suite had lost a connection with my nokia e-72...

plss help me with this problem im trying to update my nokia e-72 software
but the software updater had lost the connection with my device ..what shll o do with it?
help me people... plssss..... urgent... plsss.. help me.. guys..
i need a solution with this matter..
help me!!!!! huhuhuhuhu..

What exact message you get ? Its normal for the phone to switch OFF and ON on its own during the update.. and when it switches OFF it will give a message that the connection has been lost... so if thats the case no need to worry. The connection should get re-established when the phone switches ON.
Problem is...there are reports that the phone never gets reconnected...and for that I have not come across any 100% solution yet..

Problem with presenter (Nokia 6233)

I can't seem to get presenter to work with my phone. I start the application on my computer, I start it on my phone, then I get the phone to search for connections -> it finds my computer, but when I try to connect, the phone says:
"Connection failed. Make sure Bluetooth device on the PC is ready and try again".
I've tried everything and can't seem to get it to work. Any advice???
I have no problems using the PC suite for transferring files or anything, just the presenter.Message Edited by kicz on 14-Sep-2006
11:34 AM

I also had a prob with this... Assuming your bluetooth is working:
PC app can be found at:
http://europe.nokia.com/A4149109
Install this application just by running the executable.
Java app for your phone can be found at:
http://europe.nokia.com/A4174140
Copy both the JAR and JAD, then use PC Suite to "Install Application" to your phone.
I added another bluetooth serial port on COM10 then set Presenter (PC) to use COM10. I think the phone wouldn't connect because something else had locked my port. To add another bluetooth serial port (Windows XP SP2):
-> Start
-> Control Panel
-> Bluetooth Configuration
-> Local Services (this is for inbound connections, ignore the "Client Applications")
-> Add Serial Device (this will cause a few screens to pop up go through the new hardware found process...)
-> in the new window, give the title something like "Bluetooth Serial Port - Presenter".
-> make note of the COM Port listed here
-> uncheck the "Secure connection"
-> click "OK"
Now open up presenter and set it to the COM port you've just added (mine initially was COM10).
On your phone, go to the Presenter application and select your computer as the device to connect to and wallah! Hopefully that helps someone.
Thanks.
Dan.

No connection with device

Hi there, I have read the following instructions, and followed it, but still, my Nokia 5200 has no contact, despite the nokia mode on the device, with the update. PC suite functions perfectly. Anyone a new idea?:
Why doesn’t Nokia Software Updater detect my device?
Sometimes the drivers for your Nokia device and associated connectivity cables can become corrupted.
To resolve this, uninstall and re-install Nokia PC Suite and Nokia Software Updater:
- In your PC’s Control Panel, go to Add/Remove programs
- Uninstall Nokia Software Updater (if there are more than one entries uninstall all of them)
- Uninstall Nokia PC Suite
- Go to www.europe.nokia.com/pcsuite to download and install the latest version of Nokia PC Suite
- Go to www.europe.nokia.com/softwareupdate to download and install Nokia Software Updater

Thnx Abi99 for reply
But sending it back to a c are centre is a bit of a hassle, isn't it. It's a new phone. There's no official Care centre in the Netherlands, except an very expensive 0900-xxx phone number. This sucks..hard..Any other suggestion is highly appcreciated.

Firmware update 7.6.4 did not solve the problem that causes a loss intermittently in Wi-Fi connectivity with devices from PCs. Any suggestions?

I am having difficulties with my Time Capsule continually dropping.

Just wireless?
Do other devices stay up? Is it only the PC's that fail.. or anything else that can help us.
Has this always been a problem since you got the TC? Or was it only on the previous firmware and this latest one, 7.6.4?
How long have you owned the Gen4 TC?
Are you using SMB compatible names for wireless.. ie short, no spaces and pure alphanumeric.
Different name for 5ghz...
And manually fixing the wireless channels. Just to see if those things help??

Iphone4 stopped connecting with devices

My iphone4s has stopped connecting and in particular with my Audi A7

Hello there, LouStools.
The following iPhone Troubleshooting Assistant should help you with the steps for resolving your issue:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

Hello,
after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
My console tells me the following:
RTC Time: Wed 2014-01-01 00:07:27
Network initialized
IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
Subnet mask:     255.255.252.0
Gateway:         10.143.xxx.yyy
MAC-address:     00:0c:00:06:70:00
And when I try o to connect with the following command :
java -jar proxy.jar -socket 10.143.xxx.yyy
I get the following output and no CLI interface:
Trying to open socket connection with device: 10.143.xxx.yyy:2201
Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
Open channel 8 with hash 0x130399b3
Channel 8 CLOSED -> OPENED
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 OPENED -> AVAILABLE
Open channel 9 with hash 0x0
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
I don't know if this matter but my java version is:
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
Any ideas or am I missing something completely?
Thanks
Andy

Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
# Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
ip.method = static
# IP address,used with static IP configuration only
ip.addr = 192.168.0.30
# Network mask,used with static IP configuration only
ip.netmask = 255.255.255.0
# Network gateway,used with static IP configuration only
ip.gateway = 192.168.0.1
# DNS server,used with static IP configuration only
ip.dns = 208.67.222.222
# MAC address
mac.addr = 01:02:03:04:05:06
I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
Hope this helps others out there.
Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
Regards,
Pete

Stereo Headset (HS-47) not working on Nokia 6650 (...

The manual claims the 2.5mm connector on the phone is for a combatible stereo headset. The Nokia US website does not indicate any compatible headset. The manual does show a HS-47 headset as an accessory. I ordered a HS-47 with the result that only one (the right) speaker works. I returned the HS and received a replacement. Same problem. Is there a setting in the phone that enables the second channel? What did AT&T do to this Phone??? First they took the FM radio out, now you can't even listen to music (it is a music phone) on a stereo headset?

I haven't given up yet. Here's what Nokia tech support said:
Although it is not listed on the web address I am sure that the Nokia Hs-49 wired headset will function properly with your Nokia 6650
Armed with that information, I looked up all compatible phones with the HS-49 headset, since my real goal is to find a working adapter for the Nokia 6650 Fold.
The HDA-11 2.5mm to 2.5mm TTY adapter apparently is compatible with the Nokia 6650 Fold. Nokia Tech Support says when queried specifically about this adapter.
"I am pleased to advise you that our Nokia HDA-11 Adapter is compatible with your Nokia 6650 Fold."
My real goal, however, is to be able to use my Sennheiser headphones (3.5mm jack) with this phone.
Googling the HDA-11 has produced this thread on AT&T:
http://forums.wireless.att.com/cng/board/message?board.id=nokia&message.id=48856
Note that the HDA-11 doesn't do the 2.5mm to 3.5mm job directly, it just provides a 2.5mm jack that you can ostensibly plug a 2.5 to 3.5mm adapter into. Since I already have one of these (I bought it when I bought the phone naively thinking that it would allow me to use my headphones) , I've ordered the HDA-11 and will see if the thread listed above also applies to the 6650 Fold.
It's amazing to me that Nokia doesn't provide any way to adapt a standard 3.5mm headphone to this jack.
It's also incredible that they list virtually nothing compatible with the headphone jack on this phone on their website.
Equally frustrating is that Nokia seems to have no interest in fixing any of the above.
Stay tuned to this thread. I'll let y'all know when I get the HDA-11 jack + the 2.5mm to 3.5mm adapter lets me use my headphones with this poor excuse for a music phone.

1536dnf ToolboxFX unable to connect to device

Printer and faxing was working perfectly for several months with XP computer but when I tried to install on my new HP computer with Win7 Pro the ToolboxFX "cannot connect with device". I am able to print without any problems but when I open ToolboxFX the message appears. ToolboxFX lists the printer as a known printer but cannot connect. I have spent hours with tech support with no success. There seems to have been previous issues like this but they are older and link to firmware that no longer exists or are for XP systems.
. I have uninstalled and reinstalled both from CD and from web site. Installed firmware and updates, removed them and went back to factory defaults. I have run out of ideas and so has tech support. There has to be a resolution. This is an HP printer and an HP computer. There shouldn't be compability issues.

Hello KKCPA,
Welcome to the HP Forums!
I understand when you open the ToolboxFX you receive a message "Unable to connect to device". I will do my best to assist you!
I can relate to how frustrating this is. Just to let you know, the HP Toolbox FX is not supported in Windows 7, Windows Server 2003, or Macintosh operating systems. This HP document on Using HP ToolboxFX states this information. This is why you're receiving this problem.
Please let me know if you have any further questions.
I worked on behalf of HP.

N95 connection with Toyota TNS510 Nav disconnects ...

Recently bought Toyota Verso incl. a SatNav TNS510. The N95 should be able to work with th BT connection according all spec-sheets.
The sheets mention older Firmwire versions (I am using the V31.0.017).
After the initial connection, it is interrupted after about 20 min. (sometimes when signal when battery is full loaded).
The reconnection after restarting fails and can only be accomplished by simultaneous connection of TNS510 and N95. Still the connection is only temporary.
I tried a 6300 model and this one does not give any problem.
I expect a bouncing answer from Toyota and it must be due to the N95 seeing other phones don't have this problem. I can't find any issues by googling.
Maybe someone knows and it is just about a setting?
Bart

Bart,
If you check the Toyota compatibility site, you will see that the N95 doesn't work with TNS510. Check this site: http://techdoc.toyota-europe.com/bluetooth/search.aspx
I face exactly the same problem when pairing my E71 with my TNS510. It can connect when setting it up, but next time entering the car is disconnects, so I have to start up the connection procedure manually each time.
Also, I face that it disconnects without notice after e.g. ½ hour or so from time to time. Also, when receiving a SMS it disconnects.
Talking to Nokias support in Denmark, they are aware that with E71 there are a number of connectivity issues via Bluetooth, but despite of their friendly associates, they are not able to solve this. The best advice the Nokia associate could provide was to contact some of their business centre, who install the car-kit equipments, to see if some of them working with this in practice had solved the issue.
I did - and spoke to 5 of them - and two of them said, that the E71 runs with Bluetooth 2.0, and if the TNS510 runs Bluetooth 1.2 - it makes problems. Despite that 2.0 units should be backwards compatible, - it won't, they said.
I have tried to connect with a Nokia 6500 to my TNS510, and it works perfect. Checking the technical specs at Nokias website - it says the 6500 runs BT 1.2!!!.
Checking the Toyota website - there is a compatibility site, where you can check if your mobile works with your TNS510. A green "check" if OK, and a red cross if it doesn't. Checking my E71, it has red crosses for all the 8-10 features that apply, and the 6500? - a nice green check!.
Picking up a random list of all mobile phones with red crosses - they are BT 2.0, and the ones with green checks - they are BT 1.2.
Back into the TNS510 250-pager manual - no info about BT version, but my - in any cases premier class -Toyota dealer checked it out with the Danish Toyota importer, and the answer was, - ? Yes, you are right: BT 1.2!!
So, I'm convinced that it is here the issue is based. The BT 1.2 in the TNS 510 simply doesn't work with the BT 2.0 in the E71!
The Nokia Business centre - both - said to me, that it was quite unlikely that the TNS510 was running BT 1.2, as it is quite new - launched in the end 2008/start 2009 - and this older technology was left years ago, in accordance to the specialists.
Back asking my super Toyota dealer - he spoke to the importer - to find out two things: 1. Why it runs BT 1.2?, and 2: Is it possible to get the TNS510 upgraded into BT 2.0? (because in accordance to Nokia you can't downgrade your E71 from BT 2.0 to BT 1.2).
The answer to running 1.2. was, that the navigation system - which is a part of TNS510 is connected to the engine computer system, and allowing the BT 2.0 to the Bluetooth part of the TNS510 it would create potential risk for interruption in the engine computer system - from virus or likely bad things from the E71- cause BT 2.0 is a more open and speedy connection than the BT 1.2. I have no reasons to believe that my dealer is giving me wrong information, but I have major difficulties in understanding why the manufacturer of the TNS510 isn't able to separate the Bluetooth part from the navigation part of the unit. We got a man at the Moon in '69, and safe back, and Toyota can't get this to work 40 years after.......
About upgrading TNS510 into Bluetooth 2.0, - the answer was that there was no actual plans :-(
However, my Toyota dealer meet up with the usual spirit of complete customer satisfaction, and said that the right and formal way was to raise a "technical notification" to the importer, which will be gathered together and provided to the European Toyota centre in the end. And so he has done, and I'm just hoping that it will make a change.
So, - Dear suffering TNS510 fellows, including you Bart! - If you face the same issue between your Toyota Navigation System TNS510 and your E71 (or any other Bluetooth 2.0 phones - Nokias N and E series are in general running BT 2.0), and realise that it is caused from BT 1.2 and BT 2.0 incompatibility - please go to your Toyota dealer, and ask him to raise a "technical notification". As more we are in Europe who make this claim - as higher attention we can bring into this issue from Toyotas side - leading Toyota into solving our problems in upgrading the TNS from Bluetooth 1.2 to Bluetooth 2.0.
Enjoy your Toyota trip - well connected between your TNS510 and your E71 some day in the future!
/The Avensisdriver

Tips on Nokia 6233!! Pls read. May apply to other ...

I have the excellent Nokia 6233. I have created a guide on how to optimize your experience with the Nokia 6233. It may work with other phones as well. Enjoy! Please go to:
6233 Guide

I have the excellent Nokia 6233. I have created a guide on how to optimize your experience with the Nokia 6233. It may work with other phones as well. Enjoy! Please go to:
6233 Guide

Fixing nokia 6233 MMS Problem

I. I've just had a problem sending MMS with the Nokia 6233. When you tried to send a MMS the phone just turned white and them went to the first Menu. It seems that when you trie to send a MMS and you have delivery reports turned on (of the MMS) it blanks. Choose not to want delivery reports on the MMS and it will work. If you already changed it (and you can't send MMS) you have to reset the phone fisrt. Then do the changes you want but don't choose the reports active. If you've never changed the settings don't change it.
Regars, Manel
PS. Sorry for my english. Anything i can help just say it

If you contact your service provider they will ask you to SMS to a particular number for GPRS settings over the AIR. You receive the settings,save and you can access GPRS.
If my post has helped you please click the white star on the right

Losing connection with in-car bluetooth few seconds after receiving a call

My iphone is only able to hold connection with my Nokia CK-7W bluetooth for a few seconds when i receive a call. i'm wondering why the phone disconnects, as this results to not being able to use the car's audio system.

If you are concerned, change your Apple ID Password:
Apple ID: Changing your password - Apple Support
After you have done that, on your iPhone go to Settings > App Store and iTunes
Tap on your Apple ID
Sign out of your Apple ID
Sign back in with the ID and new password

Headset (HS-23) connection with device (Nokia 6233...

Similar Messages

Maybe you are looking for