Headset not supported??

So yesterday I wanted to listen to music with my headphones but there were strange noises when I plugged it in, and my phone showed "headset not supported", and then I used the Sony earphones that came with the phone and it still didn't work. I tried the clearing Smart Connect data method and it didn't work... What should I do?

How about if you repair your phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Headset not supported - D-Link-120

I've looked through the forums, but I'm still stymied. I have a D-Link 120 installed in my PPC 1.25 G4. I set it up to swap files with my phone, but when I try to pair my Motorola H371 headset, it says "your hardware is not compatible with headsets".
I downloaded and installed the Bluetooth Firmware Updater. When I ran it, I got the "this computer does not have an Apple Bluetooth module installed" error. I trashed Bluetooth preference file and reset PRAM. Still getting the same message.
That's as far as the discussions got me...does anyone have another idea?

i steered away from the USB adapters for bluetooth... i tried one from best buy that was 1/2 the $ of the d-link 120... had crazy problems happen?!?! i actually had USB components drop out on me! i use eyeTV and every time i tried to use the bluetooth it disappeared?!!? i assumed it was pulling too much power through the USB ports and subsequently the other devices got dropped due to lack of power...
i was told the d-link was the best one for our macs, but i never tried it again... i want to get an airport card with the bluetooth adapter on it... you can find them on line and peeps in these forums have posted links for them (can't remember where at the moment).
japamac uses it and has no problems... maybe he can chime in and help!
SITE FOR COMBO CARD
try that and look for your mac...

Howard Leight earmuffs not supported.

Hey Peeps.
So here's what's happening. My workplace recently approved new ear defenders with AUX in port. Unfortunatelly every time I'm trying to connect them to my Z1 Compact, the phone says "headset not supported". I've seen other threads about headsets not being supported, and I've cleared smart connect data, rebooted the phone, but it does not help. Even connected, the music still plays from phone's speaker. Any help on this one would be much appreciated. Here's the exact model of those ear muffs:
Howard Leight by Honeywell 1010390 Hi-Vis Radio and MP3 Ear **bleep**
Thanks in advance
Solved!
Go to Solution.

If they aren't supported then this will be a CTIA issue - Not an issue as such but the pin outs on the jack plug will be different and non compliant, You could try searching for an adapter to change the pin outs but I've not see one but then again I've never really searched for one
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Enhancement not supported Nokia 6085..Headset prob...

I just bought a new headset (Nokia Music Headset - HS-20) for my nokia 6085 and it fits in perfectly and everything but after a few seconds a screen pops up and says "Enhancement not supported" Any ideas?

1st, on the support page of 6085 your headset is not listed as supported by your phone.
2nd are you sure that the headset is original?
see if you can return it, and ask for a different one and check in the support site
http://europe.nokia.com/A4397271

Bluetooth Headset Hardware not supported

I have a Kensington USB dongle and I pasted the ASP info below. I can use it for pretty much everything except for using my headset. Does any one know of a way to enable this?
I can't imagine why Apple would only support headsets on their bluetooth hardware. I read in this forum that a D-link dongle is supported, does it have any specific features that my Kensington dongle does not list in the Apple system profiler?
Apple Bluetooth Software Version: 1.7.8f2
Hardware Settings:
tower:
Address: 00-0c-55-f8-47-c6
Manufacturer: Broadcom
Firmware Version: 2.0 (2.26981)
Bluetooth Power: On
Discoverable: Yes
HCI Version: 2 ($2)
HCI Revision: 0 ($0)
LMP Version: 2 ($2)
LMP Subversion: 26981 ($6965)
Device Type (Major): Computer
Device Type (Complete): Desktop Computer
Composite Class Of Device: 1057028 ($102104)
Device Class (Major): 1 ($1)
Device Class (Minor): 1 ($1)
Service Class: 129 ($81)
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: No
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: Yes
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
Name:
Address: 00-15-b9-8b-d6-57
Type: Cellular Phone
Services: HFP Gateway, Dialup Networking, Object Exchange, File Transfer, WBTEXT, HSP Gateway
Paired: Yes
Favorite: Yes
Connected: No
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: Yes
Serial Port 2:
Name: SerialPort-1
RFCOMM Channel: 1
Requires Authentication: Yes
Outgoing Serial Ports:
Serial Port 1:
Address: 00-15-B9-8B-D6-57
Name: Bluetooth-Modem
RFCOMM Channel: 4
Requires Authentication: No
Serial Port 2:
Address: 00-15-B9-8B-D6-57
Name: SPH-A900-DialupNetworki-1
RFCOMM Channel: 4
Requires Authentication: No

Dlink is STILL the only officially supported usb BT dongle and I have one and it works great if you only want 10m radius.
I bought a Targus ACB20 (also known as ACB20us) because my GF wanted BT connectivity for her headset on her eMac. I realised AFTER that headsets were not supported for the Broadcom Chipset in this device.
I found the answer here -> http://cbri.umn.edu/~kunau/?p=18
this guy found a belkin patch for his device that allows broadcom chipset dongles to use headsets (YAY).
here is the direct dl link for the file -> http://ccgb.umn.edu/~kunau/wp-content/uploads/2006/06/BelkinF8T012v-OSXdriver.zip
This works fine with my targus dongle and another Anycom one I have (both 100m).
Hope this works for you.
Kez

HT204368 I have an IPhone 5 & Bluetooth just keeps searching & doesn't connect to devices I'm trying to pair with. Says "not supported"

Sorry, if I've posted in the incorrect place. First post, please bare with me.
I've been trying to transfer photos from my old Samsung Galaxy Ace & Toshiba laptop via Bluetooth to my iPhone 5.
iPhone but message of "not supported" comes up when pairing. iPhone stays in search mode when trying to discover devices & does nothing.
Thanking you all in advance for your patience, understanding & help.

All you can connect via BT are headsets and keyboards. You cannot connect to your Galaxy or laptop. That's why it says "not supported."

Nokia e5 enhancement not supported

hi guys..i recently bought nokia e5 and i also got headsets ,chargers along with it.After a few days when i plug in my headset 'wh-102 hs-125 stereo headset' into the mobile i get 'enhancement not supported'.Could anyone give me a solution?I tried firmware upgrade and resetting factory settings but none appear to work.Pls help me.Thanks.

I think your headset is faulty. There have been a few other threads about this, such as
/t5/Connectivity/E5-and-Skullcandy-Headset/m-p/917639
My guess is that the phone does some kind of electrical/resistance check with the rings on the connector, and uses the result as a cheap form of plug-and-play. When the phone fails to consistently recognize the headset as a headset, you know the connectivity is failing. When you see an "Enhancement Not Support" message, you know it has totally failed.
Talk to Nokia support or to whoever sold you the E5 about getting a replacement.

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

Nokia WH-205 Headset not working in my asha 206.

Hi,
I have a problem with my headset WH-205. It does not get connected with my Nokia Asha 206. My headset goes faulty then i replaced it in Nokia Care. After that which headset i have got it doesn't get connecting to my phone n any other Nokia phone. What to do?

You'll be thoroughly thrilled to know that the N900 does not support complex headsets..
I have a pair of BH905 nokia headphones, frequently shown in official N900 videos being used with a cable..
Unfortunately when plugged into the phone using the cable, the buttons do not work.. in fact I don't believe you can use it has a headset via the cable..
Via bluetooth however, they work marginally better (the headphones crash)
Apparently headset support was removed in favor of TV out.. so head sets with multiple buttons just don't work..
I believe the only headsets that actually work as expected are the ones that ship with the n900..
I must admit, for all its faults, this was the one thing that irritated me most about this incredible media rich by peripheral crippled phone!
Bad luck, I'm afraid!

BT Handset Support... Not supported by Builtin Bluetooth Adaptor?

There's a lot of discussion about this, and I'm still confused.
I've got a brand-spanking new G5 Dual Core machine. Bluetooth is built-in. (Software Version 1.6.6f22, Firmware Version 1.2 (1.4103) ).
Yet, the Helper application for "Set up Bluetooth Device" tell me that "Headsets are not supported on your Bluetooth Hardware".
(Alexander Traud: I know you're just about ready to hit that Reply button and paste in the same helpful instructions you've given everyone else, however it won't work on my machine because I get an error that says, "This Bluetooth device is not supported" when I try to use the Bluetooth Firmware Updater.)
Assume the PRAM has been zapped and the permissions fixed.
So, does this mean that Headsets are supported, they're just not supported by Apple's own Built-in Bluetooth Adaptor?
Dual Core G5 Mac OS X (10.4.3)

Please ignore post... Was using wrong BT Adaptor.

IOS 5 do not support A2DP?

After updating to IOS 5 it does not work bluetooth headset. IOS 5 do not support A2DP?

I have an iPhone 4. I connect it to a car audio system (JVC) which has A2DP support. This morning, I tried to play music from the spotify client to the car audio, but the music kept playing on the iPhone instead. I tried looking for the AirPlay button but it was nowhere to be found, even though the system was connected to a A2DP-capable system. I went to Music, and to other apps, and none of those showed the AirPlay button even though the Bluetooth icon was on (connected).
Yesterday I was able to play music through the car audio bluetooth system, so there is definitely something wrong going on with iOS5. I will try deleting the pairing and re-pairing, and see if that fixes the issue, but I think there's something else going on.

Why the iPod Touch does not support GPS Bluetooth Reciever

Why the iPod Touch does not support Bluetooth GPS.
I had to make a jailbreak justto install and use roqyBT a Bluetooth GPS receiver,
This aplication run witch these software:
TomTom
Navigon
iGO
Maps
Google Earth
Around me
And run wich several receives as iBT 747, QSTARZ Q-1000, Holux M-1000 and my Nokia LD-3W.
But I didn´t like to use Jailbreak, I only make the jailbreak to use a GPS bluetooth.

Ipod touch supports bluetooth for stereo headsets/speakers and some peer to peer apps from the app store.
Why is not a question that can be answered here.
Only Apple would know.

Upload Error message: HTTPS protocol is not supported

Hi,
   Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
   Log says
Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
     How to resolve this?
Thanks
Sumathi

Hi Sumathi,
As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
Hope it helps
Detlev

MacBook Mini-DVI to VGA - Samsung 32" LCD - Mode Not Supported

I followed the instructions on Apple's site to use the MacBook with the lid closed and an external LCD. It worked perfectly the first time I tried it. (I believe in 1920 x 1024). It seemed a little hard to read so I changed the Display resolution, then encountered the "Mode Not Supported" on my LCD. I unhooked and used my MacBook to change the settings back, but the MacBook seems to revert to the "Mode Not Supported" resolution when I close the lid. Any suggestions? Can I reset the Display Preferences on my MacBook?

I think this procedure should work, but it requires an external USB keyboard.
- Shut down the Mac.
- Have all the following connected:
- MacBook power supply
- External display
- USB keyboard and mouse
- Open the lid on the MacBook and hit the power button.
- Immediately close the lid on the MacBook and start holding down the Shift key on the USB keyboard.
- Release the Shift key once you see the spinning gear on the gray screen on the external display.
The above procedure should cause the Mac to start in Safe mode and hopefully will finish booting into a useable screen. If that is the case, go into Displays preferences and select a known working resolution different from the one the Mac started up in under Safe mode. Now restart normally. Hopefully the newly selected resolution will persist through the normal restart and you will have a working external screen again.

Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

Headset not supported??

Similar Messages

Maybe you are looking for