Headset (Plantronics) not discovered (by Leopard)

I've recently upgraded to Leopard (10.5.2).
Now it seems that my MacBook Pro can't discover my Plantronics headset (Discovery 655) any more.
I tried the bluetooth setup assistant, to no avail.
Does anyone have an idea?
(The headset was discovered fine under Tiger).
Thanks a lot in advance.
Best regards,
Gabriel.

I just went through the same thing with the same headset. I contacted Plantronics to ask them if there are any issues with this headset and 10.5.2. The official word I got back from them is: "The 665 does work with OS X Leopard."
I decided to follow the advice of others with bluetooth problems and leopard. I deleted all of my bluetooth devices and paired my headset again. I had to do this several times before it worked. However, my headset is working again. I have tested it with SKYPE and all is well for now.
I hope that helps,
Tom

Similar Messages

Bluetooth dongle not discovering headset

My Kensington 33348 Bluetooth adapter is not discovering my new Plantronics Bluetooth headset on my Mac Pro. Headset is brand new and works fine with my phone. All you have to do to make it discoverable is literally turn it on. The 33348 dongle seems to be working with the Mac just fine too but when I try to use the discover function on the Mac It doesn't pick up the headset. I'm getting no headset icon and I don't get beyond that to enter any passkey. Any help here would be great thanks!

I contacted Kensington and the headset is not for use with computers. I thought bluetooth was a universal thing but it's the audio that is not.

Bluetooth not discovering jawbone headset

My new iphone will not discover my jawbone headset. It just searches with no response. The jawbone is on and does work cuz it worked with my treo, I even reset it.
Any ideas?

Are you putting the Jawbone in pairing mode? Make sure it is turned on, (the white light flashing) then after you turn the bluetooth on your iPhone on, hold down the noise cancel button on the Jawbone, (the button behind the power button.) Your phone should ask for a pairing code, at that time enter 0000 then you'll be paired. Hope this helps.
Message was edited by: ballison1

My iPad will not play sound through my bluetooth headset (plantronics Savi 700).

It is connected, but sound still comes from the built-in speaker. iOS 8.1.2
I tried the only recommendations that I could find. Unpair, reset All Settings, Signout of iCloud, Restart, Repair. Still didn't work.

Never Mind, Figured it out. The headset is not bluetooth audio, only headset enabled.

Review A2DP Bluetooth Headset Sony HBH-DS200 with Leopard 10.5.1

Hello, this is first post...
I'm sorry if my English is not perfect.
I wanted to buy a headset A2DP after discovering that the Leopard supported .... so I decided to create a mini-review.
Yesterday I bought A2DP Bluetooth Headset Sony HBH-DS200
Matching perfect
Stop / Pause link headphones perfect
Quality sound good but not perfect, but its is clear frequencies seem that the clips are (too high frequencies).
Now I wanted to try under bootcamp and see what result to arrive.
At the next update.
PS: Some of you have tried this headset or other headphones a2dp? HTC S100? As a new feature of Leopard seconds you can resolve this problem? Thank you

I just bought the SE HBH-DS220. It sounds really good when connected to itunes as well as to my W910i. I cannot hear any noticable difference between this and when I have a wired connection to the computer or phone. If you turn the volume to max on the clip it even plays a bit louder through the headphones, which is just a plus in my book as they don't distort the sound at all.

Ipod nano 7g not discover any device bluetooh

Hi, my ipod nano 7g not discover any bluetooh device.
I turn on the bluetooht and is "searching" in "discoverable mode" but does not detect any device.
My iphone 5, immediately detects the headset Nokia BH-503, the same as my iPad mini.
Please .... help me!

Have you placed the headset in pairing (discoverable) mode and have you turned off the BT on the iPhone 5 and iPad mini if they are in range?

IPhone 4S bluetooth not discovering bluetooth devices

My iPhone 4S bluetooth is not discovering bluetooth devices, specifically my new Platronics Voyager Pro HD headset which worked just fine with the iPhone 4 even after the recent software upgrade. I noticed that others are having bluetooth discovery issues as well. Will Apple be addressing this problem with a software fix or is this a hardware problem?
CrystalVan

Nevermind! It always helps to re-read the Platronics - how to pair your device instructions. DUH!!!!

My iPhone5 does not discover new bluetooth devices after upgrading to ios7.02

After I upgraded to ios7,02, my iphone5 connects only to one previous device only, my VW phone. It did not connect to my Logitec headset, nor other devices.
I tried forgetting both the devices, recycled power when iphone was in discovery mode.The iPhone5 still does not discover them.Is this a bug in 7.02 ?
Verified that all my devices are connecting fine with other phones.
Do any of you have the same problem ? Help !!!

Hey ravi1462,
Thanks for the question, and great troubleshooting so far! In regards to bluetooth connections, you may find the following troubleshooting information helpful:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
- Move your iOS device closer to the Bluetooth accessory.
- Remove any case, stand, or other accessories from your iOS device and see if performance improves.
- Check for sources of potential interference and move both the iOS device and the Bluetooth accessory away from other electronic devices.
- Check that the Bluetooth accessory is using a profile that works with the iOS device.
- Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
- Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Additional information:
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks,
Matt M.

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

FileReference Select and Cancel Event Not Working in leopard

FileReference not working in leopard
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
public function onClick():void{
var fr:FileReference=new FileReference();
//fr.addEventListener(
fr.addEventListener(Event.OPEN,openHandler);
fr.addEventListener(Event.COMPLETE,completeHandler);
fr.addEventListener(Event.SELECT,selectHandler);
fr.addEventListener(Event.CANCEL,cancelHandler);
fr.addEventListener(DataEvent.UPLOAD_COMPLETE_DATA,uploadCompleteDataHandler);
fr.addEventListener(HTTPStatusEvent.HTTP_STATUS,httpStatusHandler);
fr.addEventListener(IOErrorEvent.IO_ERROR,ioErrorHandler);
fr.addEventListener(ProgressEvent.PROGRESS,progressHandler);
fr.addEventListener(SecurityErrorEvent.SECURITY_ERROR,securityErrorHandler);
fr.browse([new FileFilter("images", "*.png;*.jpg;*.gif")]);
private function cancelHandler(event:Event):void {
trace("cancelHandler: " + event);
private function completeHandler(event:Event):void {
trace("completeHandler: " + event);
private function
uploadCompleteDataHandler(event:DataEvent):void {
trace("uploadCompleteData: " + event);
private function
httpStatusHandler(event:HTTPStatusEvent):void {
trace("httpStatusHandler: " + event);
private function ioErrorHandler(event:IOErrorEvent):void {
trace("ioErrorHandler: " + event);
private function openHandler(event:Event):void {
trace("openHandler: " + event);
private function progressHandler(event:ProgressEvent):void {
var file:FileReference = FileReference(event.target);
trace("progressHandler name=" + file.name + " bytesLoaded="
+ event.bytesLoaded + " bytesTotal=" + event.bytesTotal);
private function
securityErrorHandler(event:SecurityErrorEvent):void {
trace("securityErrorHandler: " + event);
private function selectHandler(event:Event):void {
Alert.show("XD");
]]>
</mx:Script>
<mx:Button x="205" y="198" label="Button"
click="onClick()"/>
</mx:Application>
Adobe Flex Builder 3 Beta3
Leopard 10.5.1
both Safari and firefox doesn't work

Flash version is 115 debug player

IPhoto not open in Leopard

Hi ALL,
Probable he wrong forum, but I have iPhoto 2 an is NOT opening in Leopard.
Is there a link where i Can download a iPhoto version that runs in Leopard?
Or can I extract it from a original install CD from a OSX version that I own. Like Jaguar - Panther - Tiger ??
Thanks for helping me out in this matter ...
Dimaxum

You need at least iPhoto 4 or later to run iPhoto in 10.5.
The only way to upgrade from v2 is to purchase an iLife package.
Regards
TD

2014 Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8

Why is Airdrop on my new Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8.0.2
Bluetooth on.
On same wireless home network.
Selected Airdrop to everyone on my iPhone 5s.
Macbook Pro was bought in August still not discovering my iphone. Airdrop icon in Finder just keeps spinning.
I'm signed into my Apple ID on the both devices. My admin login account for my Macbook is also connected to my Apple ID.
If only i could transfer selected photos to my Macbook!
Help!

Hi there Musicoshi,
It looks like this feature will be avlaible in OS X Yosemite later this fall. Take a look at the page below for more information.
Apple - OS X Yosemite - Apps
With AirDrop, sharing ﬁles has never been easier.
AirDrop makes sharing your files between Mac computers simple. And now it works between Mac and iOS, too. So with just a few clicks on your Mac, you can take a file from any folder and use AirDrop to send it to a nearby Mac or iOS device. It’s perfect for, say, sharing a document with a coworker in the next room or sending a presentation to a client across the table.
-Griff W.

My iphone 5 is not discovered ssid wifi

my iphone 5 is not discovered ssid wifi in near of ap, but most very near of ap why ???? my ios v 6.0.2 but not currect work

Try restarting the iPhone and power cycling the router.
Is the network broadcasting the Wi-Fi address? Do you see any errors when trying to join the network?
Also, take a look at this Apple doc -> iOS: Troubleshooting Wi-Fi networks and connections

Headset (Plantronics) not discovered (by Leopard)

Similar Messages

Maybe you are looking for